How to setup the clock to the second.

How to setup the clock to the second. I'm able to setup hours and minutes correctly but not the seconds precisely. Can I synchronize with an atomic clock?

Set whether iPhone sets the date and time automatically
Choose General > Date & Time and turn Set Automatically on or off.
If iPhone is set to update the time automatically, it gets the correct time over the cell network, and updates it for the time zone you're in.
from: http://support.apple.com/kb/TA38641

Similar Messages

How to setup a vpn over the internet

Hi ,
how to setup a vpn over the internet ? Just I have using window server 2012 r2, I already install 'remote access service' also ready enable VPN service but I can't connect to vpn server over Internet(Other network), when I connect from LAN , vpn service
is enable I can connected. My ADSL router also Enable VPN access(PPTP, L2TP, IPsec). But I can't access my server over Internet :'( . What I need to do? Help me please.
Thanks,

Hiya,
Did you have a look at this guide? - It gives you all the steps.
http://www.howtogeek.com/135996/how-to-create-a-vpn-server-on-your-windows-computer-without-installing-any-software/

HT5557 I've always been able to see the clock at the top of the screen in iPad iBooks, but the clock has now disappeared unless I tap at the stop of the screen. How can I get the clock to stay at the top of the screen?

I've always been able to see the clock at the top of the screen in iPad iBooks, but the clock has now disappeared unless I tap at the stop of the screen. How can I get the clock to stay at the top of the screen?

cktan124: I searched around and found the iPad does not have a PRAM.
Anyone else want to guess?
I found many folks here trying to hide of the clock, but I need the clock. I use a PDF on my iPad for my notes when I am speaking in front of an audience. I need the clock so I can kep track of time.

Hey, i just got the iPhone 5s and when i unlock my phone the clock on the lock screen shows up faded for a second and goes away is this supposed to happen

Hey, i just got the iPhone 5s and when i unlock my phone the clock on the lock screen shows up faded for a second and goes away is this supposed to happen

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Restoring > http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first..

HT4972 How do I adjust the clock on the I-pod touch?

How do I adjust the clock on the i-pod touch?

Go to Settings > General > Date & Time
EDIT: If your mean the black Clock app on your screen, you can't set that.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Unable to initialize the Microsoft Exchange Information Store service because the clocks on the client and on the server machine are skewed

Each time I restart this exchange server, the Information Store and System Attendant don't start. If It try to manually start the services, I get the follow errors:
Event ID 5003:
Unable to initialize the Microsoft Exchange Information Store service because the clocks on the client and on the server machine are skewed. This may be caused by a time change either in the client or the server machine, and may require a reboot of that machine. Other than that, verify that your domain is properly configured and is currently online.
Event ID 1005:
Unexpected error The clocks on the client and server machines are skewed. ID no: 80090324 Microsoft Exchange System Attendant occurred.
The clocks on the domain controllers and the exchange server are set to the same time zones. As well, all three clocks are in sync down to the second. Any ideas on what's causing this and how to fix it?

Run this Command from the Exchange Server
Net time \\ADServerName /Set
and confirm the action,
and then you need to restart the service
Microsoft Exchange Active Directory Topology Service
and confirm you are not getting the Error 4001 in the event Viewer.
Thank you, it resolved my issue after being sweating looking for solution.
How can I prevent this from happening? I cannot restart services on each server reboot nor lose 5 years of my life!!!
Sokratis Laskaridis MCP, MCTS, MCITP, Small Business Specialist Netapp ASAP, Symantec STS

The clock in the menu bar doesn't advance.

It shows the wrong time. When I put the pointer on it and click, it immediately gives the correct time but then it stays at that time until I click again.
For ex. it just showed 7.13 p.m. when it is 10.36 p.m.. (day is correct) I click on it, and it shows 10.36 but it will remain like that, (not go to 10.37 after a minute.)
When I go to System Pref.-->date and time it shows the correct time there, and it advances normally, every second, but not on the the clock in the menu bar.
I already click, weeks ago, the lock to prevent changes but it doesn't matter to the clock on the menu bar.
Can't be the battery: I put a new battery one month ago (not that I had any problems- I had none- but because I had this battery for 8 years and thought it's time to change) it is the correct battery (brand, voltage, etc. and had no problem until now.
I just realized something: if I choose display the clock in the windows it works just fine, when I put it in the menu bar it doesn't. I prefer it to be in the menu bar (less intrusive)

This is the first time of I've heard of this, but I went exploring anyhow. I'm thinking that you may have a preference pane incompatibility. Do you have any third party preferences panes, such as MenuMeters or MouseLocater installed? Huh? Open your system preferences and look at the bottom of the window where it says Other. A pane may have been added that is incompatible with your clock. I don't remember how to disable these, but it may just be that you right click on one of them and remove it. I am not certain as to whether or not you would have to restart at this point. I hope this is of some help at least.

Fpga using the clock of the CRIO chassis...

Hi.
I am designing an application to acquire data using FPGA. I am using an CRIO-9074. First at all, I want that the stamp of time for the records COME FROM THE CLOCK OF THE CHASSIS and not from the PC's one, because when the application be finished, the CRIO is going to connect directly to a network, without using a pc. I would like to use the Time Stamp Control. ¿How can I codify this?
Thank you for your time.

When you use the standard LabVIEW date/time functions in code that is running on the cRIO, you get the time based on the cRIO's clock.

I have what appears to be a web icon that is frozen on my safari blank page. The icon is for a website and shows the image of a progress clock. If I tap the image, the website opens, but I notice that the clock in the upper left never stops moving.

If I tap the icon, the we page will open, but the clock on the upper left corner will continue to run as though the page is still loading, but never finishes. When I close the we page, the clock image will remain on the blank safari page. I cannot get rid of it. Just upgraded software, but that did not help. Any ideas of how to get this "icon" off my blank safari page?

That's probably a bookmark you have saved in Favorites.
Tap bookmark icon>Favorites>Edit>Delete the bookmark

To display the clock in the abap screen

Hi all,
     i am Senthil,Working as programmer analyst .Can any one please tell me How to display the clock in abap screens? Is there any function module available for that or help me how to do it?
           Thanks in Advance!!!
                                                                                Senthil

dude,
U can display the clock in the status bar thro process indicator function modules or methods of classes.
If u want to display time in screen, here is the sample coding.
*& Report ZRPN_SAMP1                                                  *
REPORT zrpn_samp1.
GET TIME.
WRITE: /01 'Update Number:', sy-uzeit.
CALL FUNCTION 'zpraveen'
STARTING NEW TASK 'pr'
PERFORMING start_refresh ON END OF TASK.
AT USER-COMMAND.
IF sy-ucomm = 'REFR'.
    sy-lsind = sy-lsind - 1.
    GET TIME.
    WRITE: /01 'Update Number:', sy-uzeit.
    CALL FUNCTION 'zpraveen'
      STARTING NEW TASK 'IF'
      PERFORMING start_refresh ON END OF TASK.
ENDIF.
START-OF-SELECTION.
*&      Form START_REFRESH
      text
     -->TASKNAME   text
FORM start_refresh USING taskname.
The SET USER-COMMAND initiates the communication back to the program
SET USER-COMMAND 'REFR'.
ENDFORM.                    "START_REFRESH
This works very fine.
Lemme know u could do that by rewarding points.
with regards,
praveen.

How to setup Tibco EMS as the JMS Provider

Hi,
Are there anyone know how to setup the app. server to use Tibco EMS (installed in a remote machine) as the JMS service? May I have the setup example?
I put the host name and port of the EMS server on the Configuration JMS page. I ping the setting but I got the following:
An error has occurred.
Operation 'JMSPing' failed in 'resources' Config Mbean. Target exception message: [C4003]: Error occurred on connection creation [10.0.0.104:7222]. - cause: java.lang.NumberFormatException: For input string: "�"Any idea?
Thanks a lot for your help in advance.
Simon

Hi,
Are there anyone know how to setup the app. server to
use Tibco EMS (installed in a remote machine) as the
JMS service? May I have the setup example?The default jms commands [like jms-ping] are designed to be used against Sun Java System Message Queue that is bundled with the appserver. For integrating third party JMS providers like Tibco EMS, could you try out Generic RA for JMS [http://genericjmsra.dev.java.net]
Detailed instructions on getting Sun Java System Application Server to work with Tibco EMS using Generic RA for JMS is available off
https://genericjmsra.dev.java.net/docs/tibco-genericjmsra-integration-sample-doc/Integrating_Sun_Java_System_Application_Server_with_Tibco_JMS_using_the_Generic_Resource_Adapter_for_JMS.html
Thanks
--Siva.

My key says "Error - key importing failed gpg: key 5D391D97 was created 55491 seconds in the future (time warp or clock problem)" The clock in the computer is f

When I create a key and send it to the person I want to begin communicating with encryption, the other person gets this when importing the key: "Error - key importing failed
gpg: key 5D391D97 was created 55491 seconds in the future (time warp or clock problem)"
The clock is set properly. Can you assist me in solving this error? This happens in a PC computer running WIndows 7.
Thank you
Cecilia

I created a different key and I have the same problem. I can send you the public key in case that helps solve the problem but you need to provide me with an email address because I cannot upload it here.
Thank you for your assistance.
Cecilia

How to setup background color in the options of JOptionPane

Hi
I need to highlight the background of options of JOptionPane in different colors. Ex. 1~5 options in green and 6~10 options in red color.
Does any one know how to do it?
Thanks in advanced.

Can you work out what the actual HTML is to do
"Whatever it was that you wanted to do" ? { I couldn't understand that }
I.e If you make up a Test table, with Your Text editor can you get a sample output that looks like you want?
But the problem is i am able to change the background of the full cell. But i don't need to change the background of the full cell always. For example if Nextti value is 15/1/2005 & Duration is 30 then the shade should start from the middle of January Cell (because of the date 15th)end in the middle of next cell (February). If the duration is 15 then it should end in the (January) same end of cell.
Is this something that can be done in HTML?
If your question is 'amenable' to HTML, figure out conditions for which you want to Set a certain color....
If the color in one cell for instance depends on the Next Cell, then you're going to have to buffer the whole Table ROW....
Set which ones should be RED for instance, then output that ROW in HTML...
If you are using Java for this, then also be aware that you might need to escape certain characters like use "\\" to get "\"
You'd also probaly have an easier time, however you are doing this if you used some sort of CSS .......

How to setup NWDI environment in the Windows Server 2000?

Hi,
I need to setup NWDI environment in the Windows Server 2000. I have NWDS and SAP R/3 6.0 installed along with SAP EP 7.0.
Please provide me with enough details to do so.
from where i need to download NWDI software?
Thanks & Regards,
Sathya

Hi ,
recommend you to install it in new hardware as nwdi uses hardware resources efficiently.
You have to install a NWDI (NetWeaver Development Infrastructure -or- Usage Type "DI") with netweaver installer .otherwise you can deploy below sca files from sdm after downloading them from service market place
___DICBS*_.SCA |DI COMPONENT BUILD SERVER 7.00
___DICMS*_.SCA |DI CHANGE MGMT SERVER 7.00
___DIDTR*_.SCA |DI DESIGN TIME REPOSITORY 7.00
check sap note Note 883948
for post installation steps,you can search sdn.eeasily you can found blogs.
Regards,
Koti Reddy

How do I set the clock so the time of day shows when playing games

I play Words With Friends and get lost in time. I need my clock to show on the screen. IPad Air 2

The game hides the time and can't be changed. If you wish to limit your playing time set an alarm in the Clock App.

How to setup the clock to the second.

Similar Messages

Maybe you are looking for