How to setup the defaults (font, fontsize, fontcolor) for the Content Editor in Acrobat Pro 11.0.4?

Hi folks, maby you can tell me if there is a way to edit the default font of Acrobat's Content Editor, especial in the add text mode.
As default, my Acrobat uses Minion Pro in size 12. This drives me crazy, because i have to change this every time i add Text.
Thanks!

Unfortunately there isn't but it would make an excellent Feature Request.

Similar Messages

The default value as "None" for the report filter which is Value List type?

Hello,
I want to know is it possible to make the default value as "None" for the report filter which is Value List data type?
For example:The Project Classification Value List value type which have many value like "Supplier Rationalization" "Category Sourcing" "Contract Regegotiation" etc, and the value "Supplier Rationalization" is in the frist positon in the value list. When i use "Project Classification " as a report filter, the value "Supplier Rationalization" displayed as default value. And in the value list box in report filter of Project Classification , there is a value "None" which should be added automatically by system. So i manually filled the default value with "None" in Filter Prompt screen, but it does not work. After i display the report ,the Project Classification filter still use the ""Supplier Rationalization" as the default value.
My current ESO version is 5.1. I tried other ESO version like 5.15, if i manaully give a default value "None" in Filter Prompt screen for filter Project Classification, then the default value is "None". It works well.
Does anybody know if it's possible to do the same thing in ESO 5.1?
Thanks & Regards,
David
Edited by: David Gao on Aug 11, 2010 4:06 AM

Hi David -
This is possible, but the technique is not too obvious...
To make "None" be the default choice for a query definition filter parameter of type value list type, you need to set the default value of the filter parameter to the following:
<internal id of value list type>:616:NULL
For example, I believe you will see that the internal id of the Project Classification value list type is 51, so the default value of the filter parameter would be:
51:616:NULL
I hope this helps.
Regards,
Rob

How do I change the default fonts on Firefox for Android version 21?

Is it possible to restore the default fonts from earlier versions of Firefox to use on web pages for version 21 instead of using the new shipped Open Sans and Charis fonts?

Smo,
That is incorrect, you can change the fonts used in content to your own choosing albeit only through advanced about:config preferences. This is not recommended.
Change these in about:config;
*font.name.serif.x-user-def
*font.name.sans-serif.x-user-def
*font.name.sans-serif.x-user-def
*font.name.monospace.x-user-def
*font.name-list.sans-serif.x-user-def
*font.name-list.sans-serif.x-user-def
*font.name.serif.x-western
*font.name.sans-serif.x-western
*font.name.sans-serif.x-western
*font.name.monospace.x-western
*font.name-list.sans-serif.x-western
*font.name-list.sans-serif.x-western
I've never tried changing these so you are at your own risk here.

How can we set the Default to "New Window" for the "Create Link" – "Specify Open Preference"?

We would like to set the "New Window" as default but can't find where to set it.. I looked through all the Perferences and could not find where this is set.
We see this when creating Links.
Thanks in advance for any suggestions.

Thanks for your reply. We are using Acrobat Pro 10.1.3 on Windows 7 64 bit workstation.
We see this when adding a link in a PDF.
Go to Tools, Content, Link. Highlight something, Creat Link, click Next. Pick somthing to Link too. Like another PDF and the Window in the first screen shot comes up.
I ran a Regshot and here are the results. Looks like all user keys which would be normal but there must be a way to set the default in the Preferences? This does not seem to be a setting that stays if you will so there must be something over-riding it.

Removing the default (View As Icon) for the control and Indicator

If you remove the default selection View As Icon for all the control and indicator, it is good for the programmer for easy to visualize the Block diagram code.

This has already been suggested - http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Default-Option-Do-NOT-Place-Front-Panel-Terminal-as-Icon/idi-p/926871
Also, note that you can already change it on your computer as mentioned there.

HT1212 wondering what the default pin code is for the sim as i only have 1 attempt left. I have an iphone 5S

as the title says. I have just bought a new iphone 5S and somewhere in it there is the option to change your sim pin. wondering what the default pin
is?

buzzburow wrote:
as the title says. I have just bought a new iphone 5S and somewhere in it there is the option to change your sim pin. wondering what the default pin
is?
There isn't one.
Settings > Phone > SIM PIN.

How do I change the default font for foot/end notes in Pages 09?

The fonts for notes in Pages seems fixed to Helvetica, even when the font for the body has been changed. I've been able to save the font for the body by saving it as a tempate, but it doesn't seem to work for the notes. Any help?

looked several times in the index.xml describing the docs.
A new note descriptor starts with :
<sf:p sf:style="kSFWPFootnoteTextStyleIdentifier">
If we change something to the note attributes the app replace the default style by a custom one. For instance, it may be :
<sf:p sf:style="SFWPParagraphStyle-68">
My first attempt was to insert a font descriptor in the default style.
Alas, for the app, such descriptor is pure garbage and it delete it.
Second attempt was to try to find the descriptor of the font used by default.
At last, I discovered that the app use in fact the font described by the resouirce named : FONT_Helvetica in the Blank template.
I choose to use HoeflerText-Regular so I applied this scheme.
(1) navigate to the file
Macintosh HD:Applications:iWork '09:Pages.app:Contents:Resources:Templates:Blank.template:Contents:Resources:fr .lproj:Localizable.strings
(2) to play safety, duplicate it
(3) drag it on the Desktop bercause the System don't allow us to edit it.
(4) When it's on the desktop, if you installed the developers tools double click the file's icon.
If you didn't, drag & drop its icon on TextEdit's one.
(5) Near the bottom, you will find the line :
"FONT_Helvetica" = "Helvetica";
edit it as :
"FONT_Helvetica" = "HoeflerText-Regular";
(6) Save the file on the Desktop,
(7) Move it back in its original folder.
I described the process for the French language (which use fr.lproj)
For other languages, replace fr.lproj by the item of this liost matching your language :
da.lproj
de.lproj
en.lproj
es.lproj
fi.lproj
fr.lproj
it.lproj
ja.lproj
ko.lproj
nl.lproj
no.lproj
pl.lproj
pt_PT.lproj
pt.lproj
ru.lproj
sv.lproj
zh_CN.lproj
zh_TW.lproj
Have fun.
Oops, of course Pages is supposed to be closed when you do that.
Yvan KOENIG (VALLAURIS, France) jeudi 26 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

How to make helvetica the default font for Endesign?

everytime that I create a document, times is the default font, but most of the time I use helvetica and I want to make it the default font.
thanks.

I gave the answer to this question to someone else today. Read this thread: http://forums.adobe.com/thread/992749?tstart=0

I need to substitute the default font (times roman) in my editable form fields with a san serif...

I am making a PDF with editable form fields out of InDesign CS6. When I make the interactive PDF, the font, Helvetica Neue is being substituted with the default font, Times Roman. The client has provided me with last years PDF which has a nice San Serif for the editable fields. I need to change the font either to Helvetica Neue, or at least to a nice San Serif common system font. I have Acrobat X.
Thanks in advance!!

I called a friend of mine who walked me through this so I will post the instructions for anyone else who may be having this problem...
1. Open the PDF with the form fields in a recent version of Acrobat.
2. Click on the Toolls tab.
3. Under Forms, click Edit.
4. Now you will see your fields listed under "Field" > "Sort by"... "Text Field 1"... etc.
5. Holding "control" click where it says "Text Field 1" and some options will pop up.
6. Click on "Properties".
7. A "Text Fields Properties" window will pop up.
8. Click on the "Appearance" tab.
9. Here you can change your fonts and font sizes.
Good luck!

How do you change the default font in Illustrator CS5?

I have upgraded my Illustrator to CS5 and my default font has changed to a strange font. In Photoshop and InDesign, I was told that all you have to do is change the font in the Character menu to the font that you wish to be set as "default" and it will be the font that you always start with.
NOTE: Does this mean that if I use a different font in a different document, the font will stay that font unless I change it back? Isn't there a way to make a particular font the font that I would always what I start with? All this setup means, is that the "default font" will always be whatever the last font that was being used was. There has to be a way to make a default font that I will always start with no matter what the last font that was being used was.
Illustrator gives you no option on font type, unless a file is open. Then, if you change the font and close the file, next time you start a file, it will go back to what is was to begin with. There has to be a way to change the default font for all of these programs to where the font always stays the same unless you change it. Mine is just set to use a weird font that I would probably never use.
I just never thought it would be that big of a deal to change default settings for the font.

Okay, I basically made three different documents and I made sure that I had everything chosen in each. I then saved the three to that file and they now appear in the list:
Settings for all 3:
72psi, 150psi and 300psi
Rulers Visable
Times New Roman
12pt
14.4pt
I then went in and started three new documents. I used the three different New Document Profile's that I made and they all had Rulers, their sizes were correct, but the font stayed Myriad Pro. Did I miss anything? And, Yes, I did change the font and the setting before I saved them in the New Document Profile.
One other thing, I did create a file in the folder, but it was spelled incorrectly. I then went into the folder, erased it and made a second. Then, I went to open it in IllustratorCS5 and it was still listed. I went to the file and it wasn't there anymore, but it was still listed in the New Document Profile. Is there a way to get it off of the list or is all I have to do is restart Illustrator?

How to Change the Default Font in Firefox 4 ?

How to Change the Default Font in Firefox 4 , for this >>
http://store2.up-00.com/Mar11/AJG18655.png << ?

Go to properties first: and set before typing anything in as shown here:
http://screencast.com/t/ZTgzOTM3Y
Then right click bring up this menu while inside active field and click on item with arrrow:
http://screencast.com/t/ZTRjMWRkMzk
Now what ever you typed should reflect the new Font setting.
we may be as you say. But then again other people act like whats on the other side.
We do our best. And if we fall short, well we gave it our best shot.
Okay. In the interests of being completely clear:
I have already tried this. Several times. This procedure will change the default for any of the fields that I place by hand. It does not change the default for any of the fields placed by the Wizard. I was unable to find a solution to the problem in any of the manuals, books, or on-line forums, which is why I posted here as a last resort. This leads to two conclusions:
A. Your advice is incorrect
B. There is a problem with my installation of Acrobat
I will assume that A is not the correct conclusion. I will therefore try a re-install of my software to see if this clears up the problem. There have been other issues with other Adobe software on my machine that a re-installed has fixed nicely. Luckily, I don't have to do this at all often.

How to change the default font (Noteworthy) in Preview Annotation Note ?

How to change the default font (Noteworthy) in Preview > Annotation > Note ?
Thanks for any help guys. Noteworthy is horrible, in my view. But this does not matter. I simply do not want to use it, and woudl be fine with having helvetica back as the annotation typeface.
Neither is Preview responding to changes I attempt in the type menu, nor did I find an entry when using “defaults read com.apple.Preview” in the Terminal.
Any idea? Cheers.

Sorry if this doesn't apply in Mountain Lion (no way to look at ML right now), but I see this in Preview under Mavericks:
I click the annotation button (circled in red) and draw a box. I can then change the text to any active font using the drop down menu (circled in green).

How do you change the default font in Outlook 2013?

I am trying to set the default font in Outlook 2013 as per the customer's request and am having no success.
First I create a NormalEmail.dotm file and added it to the Office Customization Tool, created an msp and added it to my package. After installing Office 2013 I check and the NormalEmail.dotm
is on the machine in %appdata%\Microsoft\Templates folder waiting to be loaded. When launching Outlook 2013 on first run it renames my NormalEmail.dotm to NormalEmail15Pre.dotm. I created the file in Word 2013 so it's not a 2010 version and it (NormalEmail15Pre.dotm)
open cleanly in Word 2013 (it does not open in compatibility mode). If I close Outlook and rename NormalEmail15Pre.dotm back to NormalEmail.dotm Outlook opens and uses my template without any issue. This is not a solution as I have 1000's of deployments
and can't do this manually. One other thing, I did have this same problem with the default font in Word 2013 but by implementing a registry setting (HKCU\Software\Microsoft\Office\15.0\Word\Options\MigrateNotmalOnFirstBoot = 1) it used my Normal.dotm
template on first run, if such a setting exists for Outlook I can't find it.
Also I did try to set the font through the mailsettings (HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\MailSettings) in the registry as we did with O2007 and O2010 but
those do not load into Outlook when tweaked.
http://blogs.technet.com/b/odsupport/archive/2009/04/24/how-to-deploy-specific-fonts-in-office-2007.aspx
Thank you for your help.

Hi, I found out how you can set it.
You need two registry keys to be set in order to keep the preloaded settings.(HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\MailSettings)
These are:
[HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\LanguageResources]
"LangTuneUp"="OfficeCompleted"
"OutlookChangeInstallLanguage"="Yes"
both are String entries.

Anyone know how to change the default font for the new pages? Apparently it does not even come up when I search the 'Help' section of Pages. The level of incompetence in this new version seems breathtaking

I cannot find how to change the default font in the new Pages. It does not appear in the Help area when I search for it. I am never sing Helvetica for my standard documents and cannot seem to change it. What am I missing? And why does Pages help not have an easy answer?
dan

You open a blank template and change the font to you liking. Remember to also get all the styles changed with new font. Then Save As Template. Now you have a template with the font you like.

How can I set the default font in tables

I am using Pages "09 4.3. I use Myriad in Table cells and have to change the font in about 6 cells in a table before Pages accepts that is the one to use. I would like to be able to determine the default font in one operation when I first set the document up. Does anyone know if this can be done and how please?

Find out what the Paragraph Style is that is used in the table by selecting some text. Change it to what you want.
Open the Styles Drawer > click on the red arrow next to the style > Update it > When you are finished save it as a Template
Peter

How to setup the defaults (font, fontsize, fontcolor) for the Content Editor in Acrobat Pro 11.0.4?

Similar Messages

Maybe you are looking for