How to setup the PATH in WINDows XP(Home Edition)

I am not able to compile the java program using "JAVAC" . It is asking command is not available. I did setup the PATH file as it mentioned in the JAVA tutorial.
Thanks,
Kishore

Right-Click on "my computer" and select properties. go to advanced and set a new environment variable for path.That should work.

Similar Messages

  • How to setup the DirectAccess on windows server 2012 r2 essentials with 2 nics

    I have a server with two network cards (the first card NIC called "Internet" and the second NIC called "Local Network") with static IP both.
    The computer has "DomainName.local"
    I still have not connected to the internet with my company domain-name from my server
    I have installed and configured the DHCP, DNS, WINS, and trouble-free operation
    I have also installed the role "DirectAccess and VPN"
    But here we face the problem that I can not set the directaccess with two Network Interface Card
    Any information found on pages from microsoft none met my needs
    Can you help, set the DirectAccess with my server ?

    Hi:
    Remove/disable the "internet" nic and connect the server and all stations to a switch.  Connect the switch to the router/firewall at the edge.  Server stopped doing NAT after 2003.
    Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

  • How to detemine OS is Windows XP "Home Edition"?

    Is there anyway to know the OS is windows xp "*home edition*"?

    Sorry I can't answer your question.
    I can say that we can't tell the differences with System.getProperty().
    I dumped all of them and they are the same on XP Pro and XP Home.
    Let us know if you figure it out.
    Joe

  • How to setup the windows installed pxi to RT target

    how to setup the windows installed pxi to RT target?

    Ranjith,
    I think the answer for your 1st que is NO. In the sense, you can run the code, but it may not work precisely as it is supposed to...
    A target can be said to be an RT, if & only if it has an RTOS installed in it, not just Windows, which is not a real-time OS.
    Youcan run the existing code in Windows, but as I said earlier, it may not give you the actual results.
    Finally, hereafter, pl dont use the term 'box' for a PXI. It is a chassis with a main module that runs on Windows or an embedded RT processor/conrtoller that runs on an RTOS like VxWorks or Phsr Lap.
    Hope this helps you to some extent...
    - Partha
    LabVIEW - Wires that catch bugs!

  • How to setup the airport extreme for window xp

    How to setup the airport extreme for window xp

    Sorry, I forgot to mention a few points:
    1) I don't have the Airport Extreme base station;
    2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
    3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
    So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

  • How to set the path variable on Windows ME?

    I want to get a friend of mine to start using java the only problem is that we both dont know how to set the path variable in Windows ME. I cant seem to find any instructions on it for ME. So if someone could please tell me how or give me a llnk to directions for Windows ME. Thanks.

    Refer to the Installation Instructions for the package that you installed - I believe #5 if the instructions has the information. A link to the instructions is at the page you installed from.

  • Urgent!! How to setup Tomcat instance in windows??

    Urgent!! How to setup Tomcat instance in windows??
    I have the next problem when execute tomcat.bat start:
    sin espacion en entorno
    you must set java_home to point at your java development kit installation

    You need to set the following two environment variables after you install tomcat on windows
    set JAVA_HOME= {Java directory path}
    set TOMCAT_HOME= {Tomcat directory path}
    Do this and try running start.bat again. It should get past this error.

  • How to setup the RV120W for quickvpn

    Hello,
    The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.
    Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?
    Thanks for any help

    User Guides for thee rv120W are here:
    http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
    http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
    and theres some more stuff over on my site:
    http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/

  • How to change the path of sysprep files that were copied to reference computer when i capture the image from reference.

    Dears ,,
    how to change the path that sysprep were copied to reference computer when i capture the image from reference.
    Should i modify some codes in LTIAPPLY.wsf? how to modify it?
    Thanks.

    Sysprep and capture has *Three* steps.
    1. Run sysprep on the local machine (easy).
    2. Copy WinPE down to the local machine so we can reboot into winpe for capture.
    3. Capture the drive in an *offline* state from within WinPE.
    What is most likely happening is that you are having problems with step #2. 100MB is *WAY* too small to copy down WinPE. By default MDT will make this System partition much bigger, 499MB. IF you install Windows 7 from the default media. IT will only create
    a 100MB partition.
    By default MDT 2012 Update 1 and greater *should* recover to a fallback drive with the OS on it, however if you are running older versions that might not happen correctly.
    If you are still having problems, copy your BDD.log file to a public share like OneDrive and copy the link here.
    Keith Garner - keithga.wordpress.com

  • How to set the classpath in windows operating system

    hi,
    how to set the classpath in window operating system
    i want this help for setting the classpath for the tomcat
    please help me
    thank you
    darshan soni

    Open autoexec.bat in texteditor. This is an example from my autoexec, win me. Running resin
    SET CLASSPATH=c:\jdk1.3.1_01\bin\;c:\andreas\resin\bin\jsdk23.jar;c:\Jimi\JimiProClasses.zip;
    SET PATH=C:\WINDOWS;C:\WINDOWS\COMMAND;c:\jdk1.3.1_01\bin\;c:\andreas\resin\bin\jsdk23.jar;c:\Jimi\JimiProClasses.zip;C:\Program\MtsAndreas

  • How to remove the pop-up window ''Wireless Radio Status" for t430s

    Hi, I have owned my t430s for now about 2 years without any major complaints recently I've had to use the fn + f5 function quite frequently, because of my poor internet connection. so that way i can reset which signal I want to choose because the default signal I am connected to is not mine. My problem is similar to what is posted here: https://forums.lenovo.com/t5/X-Series-Tablet-and-Helix/how-to-remove-the-pop-up-window-Wireless-Radio-Status/td-p/1191059 I really want to get rid of the pop up for this feature, I've tried to follow what the other thread user's have done and try out their solutions but it does not work for my t430s i tried changing the pmev thing to what was posted in the thread. Can anyone help me? Thanks!  

    I already tried that as mentioned in my original post, it doesn't work. I still get the pop up message: this is me pressing fn + f5 

  • How to setup the security based on roles in Organization.

    Hi,
    How to setup the security based on roles in Organization.
    For example:Few users are Manager and a few user are Non Manager .Manager should have access to all work data including Non Manager and Non Manager should access based role.How to setup this? How OBI server identify the user role?
    kindly let me know.
    Regards.,
    CHR

    Hi,
    You need to have Back End support to achieve this. In Back End you need to create two groups . You need to know what joins has to be made for which group (which is more important) and also make session variable for the userrole (with SQL supporting it). In the BMM layer, we need to put the security join conditions in the 'where clause'.
    And make a common report. User loggin in with the respective userid will have userrole and joins assigned in the Back end. And they will be viewing the report according to their access.
    Hope this will solve your problem.
    Regards
    MuRam

  • How to setup the Microsoft communicator

    Hi
    What is Microsoft communicator? Is it a messenger client?
    Guys could you please tell me how to setup the Microsoft communicator (in details)
    what to write in the URL field , etc  
    Nokia E72-1 Black
    firmware : 053.001
    of 26 of nov 2010

    guys please tell me at least tell me what is the right server url of hotmail
     at first i did it with my ovi account but every time it tells me invalid url
    but when i wrote in the url bar
    ovi.com it asks me about a certificate at first i accepted once but did'nt work on the second time i accepted the cirtificate permentally and confirmed when asked it will always confirm
    and i pressed yes and also nothing happened
    then i tried to do this with hotmail but every time  i write www.hotmail.com in the server url it says invalid url
    please help me
    please
    Nokia E72-1 Black
    firmware : 053.001
    of 26 of nov 2010

  • How to setup the complex ownership relationship in SAP BPC

    Hi Buddies,
    I am new to SAP BPC. For legal consolidation, I am confused how to setup the ownership in BPC. The senario is following:
        P is the parent company, S1 and S2 are subsidiaries.
        1) P owned S1 80%, ownded S2 90%, meanwhile S1 owned P 20%
            How to setup this?
        2) P owned S1 80%, owned S2 70%, and S1 owned S2 10%.
            How to setup this?
    For above 2 senarioes, how to calculate the Minority Interest? ( Using different consolidation rules?)
    And if there are subgroup, how to see the subgroup result?
    Thanks in advance.
    Maggie Liu

    Hi Will,
    Thanks for reply... Actually, I've tried that before(putting comma after the flag "all," presuming the 71st step shows that I should have 3 members in the memberset under the ICDatasrc dimension. But it also did not work.
    Nope, step 71 did not tell us to use piping and consequently expanding the col key range.
    Thanks...
    Dryan

  • How to setup the client application for the RMI?

    Question:
    I write a short program of RMI It contain server and client
    if server and client are run on localhost they are running ok
    but run client application on remote machine it occure issuses.
    How to setup the client on remote machine?

    hello Dhanraj K, for gmail accounts there shouldn't be much manual configuration required. please try to set it up like described in [[Add an email account to the Mail app in Firefox OS]]

Maybe you are looking for