How to setup the trunk for private vlans across 2 switches (Both are SF300-24)

Dear All,
I have 2 switches which are SF300-24.
Switch 1 is connected to Internet Router for all clients on swith1 and switch 2.
The clients on switch 1 & switch 2 don’t communicate each other.
Port1~Port24 on switch 1 & switch 2 are isolated ports.
Gigaport1 on switch1 is connected to gigaport1 on switch2.  
Gigaport2 on switch2 is connected to Internet Router.
The VLAN 100 is for isolated ports.
The native VLAN is 1.
Please help me how to configure the case. Thanks for your help.

I think he's just looking for PVE.  You can enabled 'protected port' on a port by port basis.
Here's the excerpt from the admin guide.
Protected Port
—Select to make this a protected port. (A protected port is
also referred as a Private VLAN Edge (PVE).) The features of a protected port
are as follows:
Protected Ports provide Layer 2 isolation between interfaces (Ethernet
ports and LAGs) that share the same VLAN.
Packets received from protected ports can be forwarded only to
unprotected egress ports. Protected port filtering rules are also applied
to packets that are forwarded by software, such as snooping
applications.
Port protection is not subject to VLAN membership. Devices connected
to protected ports are not allowed to communicate with each other, even
if they are members of the same VLAN.

Similar Messages

  • How to setup the RV120W for quickvpn

    Hello,
    The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.
    Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?
    Thanks for any help

    User Guides for thee rv120W are here:
    http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
    http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
    and theres some more stuff over on my site:
    http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/

  • Private vlan across switches in NX-OS

    Hi,
    I'm trying to make a scenario to span private vlan across multiple switches but I couldn't get this to work in NX-OS N7K.
    My topology is similar to the one in the picture attached.
    I tried to ping from isolated host vlan 201 in switch A to isolated host vlan 202 in switch B. Promiscuous trunk port has been configured to upstream router in Switch A. From switch a to switch b is a normal trunk port.
    But still, I can't establish any connectivity from host vlan 201 to host vlan 202.
    Any suggestion?
    thanks

    Jerry -
    Any idea why? This breaks the ability to use moderately complex ACLs. For example - how would you configure scavenger class traffic to ignore some traffic, and mark other?
    Carole

  • How to Setup the DR for SQL2008

    Hi
    I want to setup the DR on SQL2008 .
    Following activities i have performed for the Active and stanby procedure.
    1. Taken the Full backup
    2. Restore it on the standy server in restoring mode
    3. Configure the Transactional Log shipping for the active server.
    Question :
    4 . How to apply the transaction log  in the standy server automatically ?
    I hope this procedure is correct
    Regards
    haroon

    Hi
    Check this link may help you.
    http://www.google.co.in/url?sa=t&rct=j&q=dr%20setup%20in%20ms%20sql%2Bsap&source=web&cd=4&ved=0CEIQFjAD&url=http%3A%2F%2Fdownload.microsoft.com%2Fdownload%2Fd%2F9%2F4%2Fd948f981-926e-40fa-a026-5bfcf076d9b9%2FSQLServer_HADR_QR.docx&ei=DP_mTr_mFszPrQeEsYy-Bw&usg=AFQjCNG4VN9Kg2Qhh7xYS2zGarrjydFRnw&sig2=vPWAXwikM9nF0ZtcbwaQWg
    http://www.google.co.in/url?sa=t&rct=j&q=dr%20setup%20in%20ms%20sql%2Bsap&source=web&cd=3&ved=0CDoQFjAC&url=http%3A%2F%2Fdownload.microsoft.com%2Fdownload%2Fd%2F9%2F4%2Fd948f981-926e-40fa-a026-5bfcf076d9b9%2Fsap_sql2005_best%2520practices.doc&ei=DP_mTr_mFszPrQeEsYy-Bw&usg=AFQjCNHRBYRBWp4dNA2_lrLW25wHcza3nA&sig2=8xxXsFE6JdYGd5Lp5tdr-Q
    Thanks
    Sadiq

  • How to setup the environment for doing the Performance Testing?

    Hi,
    We are planning to start the performance testing for iProcurement Product, Max number of user we are going to use 1000. For this simulation, what are all basic setups need to do for Application Tier, Database Tier,etc... Can anyone suggest what is procedure to setup environment depending upon the load?

    User Guides for thee rv120W are here:
    http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
    http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
    and theres some more stuff over on my site:
    http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/

  • How to setup the client application for the RMI?

    Question:
    I write a short program of RMI It contain server and client
    if server and client are run on localhost they are running ok
    but run client application on remote machine it occure issuses.
    How to setup the client on remote machine?

    hello Dhanraj K, for gmail accounts there shouldn't be much manual configuration required. please try to set it up like described in [[Add an email account to the Mail app in Firefox OS]]

  • How to setup the email application for my gmail account in firefox os.. I need the configuration steps for gmail.

    I don't know how to setup the email account sync in firefox os.. can anyone explain the steps to be followed for setting up a gmail account...

    hello Dhanraj K, for gmail accounts there shouldn't be much manual configuration required. please try to set it up like described in [[Add an email account to the Mail app in Firefox OS]]

  • How to setup the Airport Extreme for PSP?

    Can anyone tell me how to setup the Airport Extreme for PSP? I have been searching the Discussions but none of the posting seems to explain detail enough. A step by step guide would be very appreciated. Thanks.
    PowerBook G4   Mac OS X (10.4.3)  

    Sorry, I forgot to mention a few points:
    1) I don't have the Airport Extreme base station;
    2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
    3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
    So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

  • How to setup the Linksys router E4200 DD-WRT for WVC54GCA

    I don't know how to setup the Linksys router E4200 DD-WRT for WVC54GCA. The DD-WRT is very complcated. Please help!!!!! Also, I have used the TZO.com for the DDNS. Should I setup the DDNS for DD-WRT router??? I used the DDNS for my old model router before. Thanks.
    Solved!
    Go to Solution.

    Hi majekho, that is best be answered by support from the developers at the DD-WRT forums.
    The Search Function is your friend.... and Google too.
    How to Secure your Network
    How to Upgrade Routers Firmware
    Setting-Up a Router with DSL Internet Service
    Setting-Up a Router with Cable Internet Service
    How to Hard Reset or 30/30/30 your Router

  • How to setup the portal with the uniform style for SRM + Esourcing?

    how to setup the portal with the uniform style for SRM + Esourcing? We will setup SRM 7 + esoourcing + portal, but as we know esourcing screen style is not same with SRM, so how to uniform the style between this 2 diffirent software?  any body have idea?

    Hi,
    SAP E-Sourcing 6.0 is the solution. It is same look&feel.
    Regards,
    Masa

  • How to setup the airport extreme for window xp

    How to setup the airport extreme for window xp

    Sorry, I forgot to mention a few points:
    1) I don't have the Airport Extreme base station;
    2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
    3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
    So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

  • How to setup the IM app for google talk 5800

    How to setup the builb-in IM app for gtalk?

    The Build-In IM can be used only with your Mobile Operator's IM service. You can use Fring (www.fring.com) or Slick (http://www.lonelycatgames.com/?app=slick) for Google Talk.
    Nokia 5800 Xpress Music + 8 Gb Nokia microSD class 6

  • [svn:fx-trunk] 10545: Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts

    Revision: 10545
    Author:   [email protected]
    Date:     2009-09-23 13:33:21 -0700 (Wed, 23 Sep 2009)
    Log Message:
    Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts
    QE Notes: 2 Mustella tests fail:
    components/DataGrid/DataGrid_HaloSkin/Properties/datagrid_properties_columns_halo datagrid_properties_columns_increase0to1_halo
    components/DataGrid/DataGrid_SparkSkin/Properties/datagrid_properties_columns datagrid_properties_columns_increase0to1
    These fixes get us to measure the embedded fonts correctly when going from 0 columns to a set of columns so rowHeight will be different (and better) in those scenarios
    Doc Notes: None
    Bugs: SDK-15241
    Reviewer: Darrell
    API Change: No
    Is noteworthy for integration: No
    tests: checkintests mustella/browser/DataGrid
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-15241
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as

    Hi Matthias,
    Sorry, if this reply seems like a products plug (which it is), but this is really how we solve this software engineering challenge at JKI...
    At JKI, we create VI Packages (which are basically installers for LabVIEW instrument drivers and toolkits) of our reusable code (using the package building capabilities of VIPM Professional).  We keep a VI Package Configuration file (that includes a copy of the actual packages) in each of our project folders (and check it into source code control just as we do for all our project files).  We also use VIPM Enterprise to distribute new VI Packages over the network.
    Also, as others have mentioned, we use the JKI TortoiseSVN Tool to make it easy to use TortoiseSVN directly from LabVIEW.
    Please feel free to contact JKI if you have any specific questions about these products.
    Thanks,
    -Jim 

  • Hi, Might I know that how to setup the printer setting at InDesign CS6 for the Lable print?

    Hi, Might I know that how to setup the printer setting at InDesign CS6 for the Lable print?

    Label printing isn't something you set up in the print dialog in ID. If your print driver has an n-up feature that might work, but in general you need to create pages of labels to fit your sheets in ID, then print. If you are talking about doing a merge of an address list, read about Data Merge in thehelp files.

  • How can setup the outgoing email for ipad2?

    How can setup the outgoing email for ipad2?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

Maybe you are looking for

  • Thinkpd yoga: blurry text on some windows, on win 8.1

    Hi folks, Some texts look blurry on some windows. I have attached a picture to show you what I mean. If you see "Device Manager" window, the text is blurry. On the other "System" window, the text is just fine. Please, let me know your opinion on this

  • Object dependency

    dear sir, in variant configuration ,i have one characteristic and two values characteristic is A values are 001 and 002 inside super bom i have a material bom B i have attached(assigned) two selection condition dependencies( say D1 and D2 ) for this

  • How can i find a owner of a iphone without aplle id?

    how can i find a owner of a iphone without aplle id?

  • Problem to open form for tab

    Hi, i am using tab in form. when i open the form no fields are showing which are under tab. but if i open that form through screen painter -> preview  -> close screen painter. thereafter its working fine. what is the problems ???? i am using 2005 ver

  • Stabilize Multicam clip

    Just completing my first multicam project using FCPX. I need to add some stabilization to one of the clips. The problem I have is the stabilization controls are not visible when editing multicam. I am sure that there must be a way, once finishing sel