How to setup three SharePoint sites on one server?

Hello,
How to setup three SharePoint sites on one server? I have three sites like:
http://site1
http://site2
http://site3
And need to have them running up on one server. I recall some changes need to be done to the host file, but not sure. Can you advise on what to change?
Thanks,
Paul
Paul

you need to make entries in DNS to get this done.
check here:http://spshare.blogspot.com/2012/05/how-to-create-host-header-web.html
nice blog with step by step explanation:
http://thuansoldier.net/?p=1323
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Similar Messages

How to setup multiple base station under one network?

How to setup multiple base station under one network? I have 6 rooms but one airport base station makes really difficult to get good signal from every rooms. I wonder if I can setup multiple airport base stations talking to each other under the same network to build up the signal strength will help solve this problem. But, is it possible? How?

One route would be to utilize a "roaming" network. In a roaming network, you would connect multiple AirPort Extreme Base Stations (AEBS) to the same Ethernet. Of course, this would require that your home is already wired for Ethernet.

How can you move the objects from one server to another?

how can you move the objects from one server to another?

Hi,
Collecting objects for Transporting
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
Releasing Transport Request
Lets say you are transporting from BWD to BWQ
Step 1: In BWD go to TCode SE10
Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
Note: First release the child request and then the parent request
Steps below are to import transport (generally done by basis )
Step 1: In BWQ go to Tcode STMS
Step 2: Click on Import queue button
Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
Step 4: Click on refresh button
Step 5: High light the trasnport request and import it (using the truck icon)
Transport
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps.
thanks,
JituK

Using sjsws to host many small servlet/jsp sites on one server

Hello. I visited the web page at http://www.sun.com/software/products/web_srvr/features.xml, which mentions that sjsws supports mass hosting of thousands of domains. Anyone knows more information about this feature? I want to find out whether sjsws is a good choice for hosting many small servlet/jsp sites on one server.
Some time ago, I tried using apache+tomcat to host many small servlet/jsp sites on one server. But the result was not satisfactory. If a private tomcat/jvm is used for each site, too many resources are consumed and as a result, not many sites can be hosted on one server. If a shared tomcat/jvm is used for all sites, the resources consumed are reduced, but it becomes very difficult to isolate the sites. Is it possible to overcome such problems with sjsws?
Thx.

Of course you dont have to use multiple VMs to host multiple applications.
You can either choose to have multiple Virtual Servers, all in one instance of the web server, serving multiple applications. In this case only one java VM is used.
Or you can go in the route posted in the link above, in which there is only one "physical" virtual server, with many dynamic virtual servers.
Whether you chose to have many multiple web applications, or do the server division in a similar way to what is described in the blog, it is up to you.
Many different web applications will give you more fine level control on the application separation, but it will probably also mean greater resource consumption associated to the web application managing.
Less web applications, but with dynamic separation, in a similar way to what is described in the blog, will give a lesser control on the applications, but will save you a good number of resources.
SJS Web Server is known to work in massive web sites, with very high number of JSPs and Servlets. There is some real life examples of this massive hosting. Maybe others can provide some numbers here :P

How to have three Windows laptops share one iTunes library stored on a networked external drive?

We just replaced our one desktop PC with three laptops. Each laptop wants to access the same iTunes library, which now resides on an external drive connected to the network via our router. How can this be done, and if one laptop adds a file to the library, will the other two see it?

Tom DePrenda wrote:
I used the consolidate library feature and it moved all the music to the appropriate iTunes folder on the Share.
Good!
I have the Vista laptop pointing to the Share for the iTunes Media folder location.
Good!
The question is how do I add the files to her library?
Go to your File menu and use the command Add Folder to Library. When the dialog comes up, point it to the Music folder in the Share area. But read on first...
Also do I keep the boxes checked "Keep iTunes Media folder organized"
You must turn off the "Keep..." option. Otherwise, when one of you changes a tag, iTunes will re-"organize" and the other person's iTunes will lose the link.
The "Copy..." option should also be turned off. As you add new music, put it where you want it. Then you must "Add File to Library" from each iTunes.

How to combine three PDF documents into one PDF document ?

Hi Folks,
I have a requirement to combine 3 PDF documents into One PDF document, let me explain clearly.
I have developed two Adobe forms in T.code SFP and I have one PDF docuement which is stored in DMS (T.code CV02n), and now I want to combine these three PDF documents into one pdf.
I have tried below link, but only 50% can able to do my requirement.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/404e4dc1-a79c-2d10-a7b5-9a266dfed9cb?QuickLink=index&overridelayout=true
Is there any best solution to fix this.
Best Regards,
Naresh Kumar.

Hi Lukas,
Thanks for your response on this.
Krisztian's solution will work/merge only for Adobe forms created in T.code SFP but can't merge with the pdf document which is sitting in CV02N (This doesn't have Adobe form name in T.code SFP), this is what I understood.
And one more bad news is we are not able to install that unix file in our client system, it is not compatable.
Best Regards,
Naresh Kumar.

How to setup ftp with dreamweaver and windows server 2003

Does anyone know if there is a tutorial/article on settinp up Dreamweaver cs3 to use Windows server 2003 as an FTP server...
any assistance would be greatly appreciated...

I was able to figure out how to setup the ftp connection, connect to my home server, however,whenever i tried to upload the contents of my website to my server, nothing gets uploaded to the site. I tried putting one page at a time, nothing. tried everything, and still no joy. I can see everything on my local server which is a XAMP package, but nothing on my remote server. Do i maybe need to maybe have a WAMP or XAMP on the Windows Server 2003 or that should not matter. This is new to me so i am learning as i go along.
Another thing, i was able to create a subfolder in my c:\www.ftproot folder, i can see that folder on my local machine, i'm just not seeing the files in that folder when i do my 'put' with my files.

I would like to have 2 seperate sites on one server

Hi to all,
I am a graphic designer who sometimes uses iweb to create very simple sites, which have worked in the past.
I have a friend who is opening a restaurant and I want to help out by creating a web site for her in iweb.
She already has one "site" for her photography, which is a page that says under contruction on her FTP which is contained the index.html file that appears in the web file on the FTP. If I publish the restaurant site to her FTP it replaces this existing photography site's index.html file and her photography site is lost . Is it possible (and how??) to have 2 index.html files on the FTP so that 2 sites can exist together?
I really hope someone can help with this...
Thanks in advance,
Lisa

Assuming just one server domain, the sites can co-exist because each is in its own folder, but you can only have one index.html file at root level. This file redirect to the site which is at the top of the list if you have two sites in the same iWeb, or to the site which updated last if you are using separate computers.
The point of an index.html file is that you don't have to state it - if you have one at fred.com/index.html then just fred.com will bring it up.
So: supposing you have two sites at fred.com, one called jim and the other called mary. Each lives in its own folder, so their respective URLs are fred.com/jim and fred.com/mary (iWeb sets things so that those URLs bounce you on to Welcome.html or Home.html or whatever your starting page is called).
Whichever way you work it, those URLs will be stable. However, if you are each uploading from separate computers, just fred.com will lead to whichever site was updated last. The only workarounds are manually to remove the index.html file at root level and stick with the longer URL in each case: or for the second site to keep a copy of the first site's index.html file and manually replace it at root level after each time they've uploaded.
In the event that your server supports subdomains, Ethmoid's suggestion is neater.

How to copy procedures and packages from one server to another?

Hi,
I have 439 packages and 178 procedures located in one server called MAXWELL.
I need to copy these objects to another server called TITAN.
The schema names is SPCBR in both servers.
So both servers have an instance running with this schema SPCBR.
SPCBR in TITAN server has their tables with table data which was generated by an export/import process from MAXWELL server.
However, procedures and packages were not copied by the export/import because I used the clause 'tables'.
Now, what can I do in order to equalize procedures and packages in both databases? I can't risk in damaging or duplicating data in my database located in TITAN server, ok?
Thanks,

Another simple alternative, according to AskTom (http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:454220160386)
---------------- getcode.sql ----------------------------
set feedback off
set heading off
set termout off
set linesize 1000
set trimspool on
set verify off
spool &1..sql
prompt set define off
select decode( type||'-'||to_char(line,'fm99999'),
'PACKAGE BODY-1', '/'||chr(10),
null) ||
decode(line,1,'create or replace ', '' ) ||
text text
from user_source
where name = upper('&&1')
order by type, line;
prompt /
prompt set define on
spool off
set feedback on
set heading on
set termout on
set linesize 100
------------------- eof --------------------------------
it extracts one procedure, function or package to a file. Thats it. If you
wanted to get all of the procedures in a schema extracted to the current working
directory, you would run a script:
--------------- getallcode ---------------------------
set termout off
set heading off
set feedback off
set linesize 50
spool xtmpx.sql
select '@getcode ' || object_name
from user_objects
where object_type in ( 'PROCEDURE', 'FUNCTION', 'PACKAGE' )
spool off
spool getallcode_INSTALL.sql
select '@' || object_name
from user_objects
where object_type in ( 'PROCEDURE', 'FUNCTION', 'PACKAGE' )
spool off
set heading on
set feedback on
set linesize 130
set termout on
@xtmpx.sql
---------------- eof ---------------------------------
You can see how to filter on that one by adding to the where clause if you want.
Just run @getallcode_INSTALL to run all of the scripts...

How Can I Copy an database from one server to another ?

Hi All,
I need to copy an existing database from one server to another server. I want to maintain all the settings from the source database.
I´m not used to Oracle database and i´d be glad for any help.
How can I do this ? Do I need to backup and restore in the other server ? Do I need to copy files from one server to another ?
Any help will be really appreciated.
Carlos.

I think a simpler approach, other than using RMAN, is to do a database export from the source and then import them into the target database. But you will need to do some ground work on the target, i.e, create database, tablespaces, and schemas (with their name the same as those in the source database.)

How to setup microsoft outlook 2011 with exchange server 2007

How to setup microsoft outlook 2011 for Mac with Exchange server 2007?

The folks who set up the Exchange Server should be happy to help you.

How to Import/Export database tables from one server to other in oracle8i

Hello friend,
Please can any one tell me how to import/export groups of database tables from one server with oracle to another using VB.net. It would be nice if some one can provide some code of it.
I am a software developer and I am in middle of a large project development, in which I need to export a large oracle database from one server to another efficiently.
Its very urgent so please someone help me.

At command prompt (source db)
set ORACLE_SID=db_name
exp system/password@db_name full=y buffer=104857600 file=(c:\file1.dmp, c:\file2.dmp....) log=c:\exp.log filesize=2000M
Then ftp the export dump files (in binary) to the other server or copy to target server over the network.
At command prompt (target db)
set ORACLE_SID=db_name
imp system/password@db_name full=y ignore=y buffer=104857600 file=(c:\file1.dmp, c:\file2.dmp....) log=c:\imp.log filesize=2000M
If the path names of the datafiles are going to be different in the target server (as compared to the source), then precreate the tablespaces before import. Set buffer value accordingly.
Message was edited by:
FeNiCrC_Neil

RE: How to have multiple application running under one server

          I have one server
          I have many application
          Question: Is it possible for me to have a weblogic properties file under each
          of this application.


If your question is whether you can run multiple instances of WebLogic
          (or multiple applications) on one server, the answer is yes. The only
          problem is, you must have a unique port for each of the servers to run
          on. I.e., they can not all run under port 80 which has obvious
          internet/network implications.
          This also means you have multiple weblogic.properties files etc. for
          each instance.
          We do this with WL5.1 on a Linux 2.4 kernel in developement to allow
          multiple developers run their own instance on one box.
          Dano
          Mettu Kumar <[email protected]> wrote in message news:<[email protected]>...
          > No if you are running single instance of wls.
          >
          > Kumar.
          >
          > Sonny wrote:
          >
          > > I have one server
          > > I have many application
          > > Question: Is it possible for me to have a weblogic properties file under each
          > > of this application.

How to setup NWDI environment in the Windows Server 2000?

Hi,
I need to setup NWDI environment in the Windows Server 2000. I have NWDS and SAP R/3 6.0 installed along with SAP EP 7.0.
Please provide me with enough details to do so.
from where i need to download NWDI software?
Thanks & Regards,
Sathya

Hi ,
recommend you to install it in new hardware as nwdi uses hardware resources efficiently.
You have to install a NWDI (NetWeaver Development Infrastructure -or- Usage Type "DI") with netweaver installer .otherwise you can deploy below sca files from sdm after downloading them from service market place
___DICBS*_.SCA |DI COMPONENT BUILD SERVER 7.00
___DICMS*_.SCA |DI CHANGE MGMT SERVER 7.00
___DIDTR*_.SCA |DI DESIGN TIME REPOSITORY 7.00
check sap note Note 883948
for post installation steps,you can search sdn.eeasily you can found blogs.
Regards,
Koti Reddy

How to setup multiple content servers on one host

Hi,
We have setup 2 ECC 6.0 systems on one host ECC DEV and ECC QAS. Windows 2003 Server 64bit
We want to setup 2 standalone Content Servers (MaxDB). One contentserver pointing to ECC DEV and one to ECC QAS. Containing its own content.
Problem is that I was not able to set up 2 content servers on one host because in ISS i could only create one default webservice during installation.
To my opinion it must be possible to setup 2 standalone content servers on one host, question is how?
Can anyone help me how to proceed?
Many Thanks!
Best regards,
Jacco Raymakers.

Hi Jacco
You cannot Configure Two Content Servers on IIS( One Sigle Hardware).
As this Content Server you have configured can be used by both ECC DEV and ECC QAS.
There is no need of two content servers.Same Contentent server can be used by ECC DEV and ECC QAS.
Configure Content Repository and Content category diferrent for ECC DEV and ECC QAS.
I hope I have answered your query.Please let me know if helpfull.
With Regards
Mangesh Pande

How to setup three SharePoint sites on one server?

Similar Messages

Maybe you are looking for