How to setup Time stamp for CO-PA.

Hello Friends,
I have created CO-PA datasource in KEB0. Defaultly, the delta method has been selected as
'Generic delta'. But, I need time stamp for delta process.
Where can I setup time stamp for CO-PA data source?
Thanks
Sumanth

Hi,
You need not maintain the timestamp for COPA separately.
A generic data source for which delta based on the timestamp is automatically created.
By default the delta for CO-PA is based on timestamp and you need not do it manually.
Once you do an init for this and see an entry in RSA7 for the COPA data source then you check the option delta status in front of the data source...just click on it and it will tell you upon which field the delta for data source is based...you will find that for CO-PA its by default always timestamp.
Thanks
Ajeet

Similar Messages

  • How to setup Time Capsule for wireless backup only

    I have a new Time Capsule that I want to set up for wireless backups of both my Macbook Air (with Time Machine) and a Windows Vista laptop. I have an existing home wireless network with my Att/Uverse tv and internet service. I do not want to disturb that network/internet setup.
    How do I set up the time capsule to use it for wireless backup only? When I start the Airport utility setup, the first thing it asks is do I want to 1) set up new network, 2) replace existing router, or 3) join existing network.

    Thanks. That got me the green light and a message that everything was set up properly. It started it's first Time Machine backup and everything looked good for a while. But now I have a new problem.
    The backup failed twice. The first time it had a message that it could no longer find the time capsule, so I had to reset it and go thru the setup procedures again. Started backup again overnight, and this morning it tells me that it failed again. But this time I still have my green light, and the message is "a network problem may have interfered with the backup.
    I don't know what else to do with the setup to get it to work. Right now it has started backing up again on its own, so I'll leave it going one more time. (I should tell you that all of this is occurring on my Mac. I have not even started setting it up on the Vista machine. I want to make sure it works on the Mac first). Any advice from anyone who had the same problems with setup would be appreciated.

  • How to use time stamps en how to make time stamps in Adobe Reader

    How to use time stamps en how to make time stamps in Adobe Reader

    Did you find a solution? I am having the same problem.
    PDF compatibility level is too high. Supported PDF versions are PDF 1.3 and PDF 1.4 (Acrobat 4, 5 and 6). If you are using Acrobat 7 or higher you will need to save your file at a lower PDF compatibility level.

  • How to setup the RV120W for quickvpn

    Hello,
    The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.
    Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?
    Thanks for any help

    User Guides for thee rv120W are here:
    http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
    http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
    and theres some more stuff over on my site:
    http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/

  • How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?

    How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
    I have Direct Access implemented in my environment. I have Windows 8.1 machine connecting through direct access.
    I want to manage the windows 8.1 through SCCM. How do I setup IPV6 boundary. Can someone guide me through?
    Below are the Windows 8.1 client IP Configuration
    C:\Windows\system32>ipconfig
    Windows IP Configuration
    Wireless LAN adapter Local Area Connection* 3:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Wireless LAN adapter Wi-Fi:
       Connection-specific DNS Suffix  . : home
       Link-local IPv6 Address . . . . . : fe80::7466:11a5:39ed:ffb0%4
       IPv4 Address. . . . . . . . . . . : 192.168.1.5
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 192.168.1.1
    Tunnel adapter isatap.home:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . : home
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:1494:1339:93d6:439c
       Link-local IPv6 Address . . . . . : fe80::1494:1339:93d6:439c%9
       Default Gateway . . . . . . . . . :
    Tunnel adapter iphttpsinterface:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819
       Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:206c:f857:ddbe:2f2b
       Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10
       Default Gateway . . . . . . . . . :
    Below are the IPConfiguration details for Direct Access server
    C:\Windows\system32>PsExec.exe \\MURA01 ipconfig
    PsExec v1.98 - Execute processes remotely
    Copyright (C) 2001-2010 Mark Russinovich
    Sysinternals - www.sysinternals.com
    Windows IP Configuration
    Ethernet adapter Ethernet:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:3333::1
       Link-local IPv6 Address . . . . . : fe80::b1ad:1c29:b4a:9125%15
       IPv4 Address. . . . . . . . . . . : 10.192.1.25
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.192.1.1
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter isatap.{3D6A5E86-D85A-46C8-B69B-FFCF6D5D849C}:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1:0:5efe:10.192.1.25
       Link-local IPv6 Address . . . . . : fe80::5efe:10.192.1.25%18
       Default Gateway . . . . . . . . . :
    Tunnel adapter 6TO4 Adapter:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter IPHTTPSInterface:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::1
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::2
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:2552:e9f8:87d3:ed8e
       Link-local IPv6 Address . . . . . : fe80::2552:e9f8:87d3:ed8e%20
       Default Gateway . . . . . . . . . :
    ipconfig exited on MURA01 with error code 0.
    Below are the IPCONFIG Details for SCCM Server:
    C:\Windows\system32>PsExec.exe \\sccm01 ipconfig
    PsExec v1.98 - Execute processes remotely
    Copyright (C) 2001-2010 Mark Russinovich
    Sysinternals - www.sysinternals.com
    Windows IP Configuration
    Ethernet adapter Ethernet:
       Connection-specific DNS Suffix  . :
       Link-local IPv6 Address . . . . . : fe80::9f0:86f9:441d:bc07%12
       IPv4 Address. . . . . . . . . . . : 10.192.1.30
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.192.1.1
    Tunnel adapter isatap.{0749E47D-AE0A-4D47-9D37-BDDC848E56F6}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    ipconfig exited on sccm01 with error code 0.
    What will be the IPV6 values to configure boundary?

    Depending on how the clients connect use the IPv6 prefix of their 6to4, Teredo, and/ or IP-HTTPS tunnel. Just keep in mind that it could become a long list...
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Date and Time stamp for the archives

    Hi,
    I'm trying to set up a date/time stamp field for a Documaker archive.
    I've added a TIME_STAMP field in my APPIDX.DFD and I populate the field using a DAL script, invoked by a PreTransDAL line in my AFGJOB file. That works fine but, the DAL script being invoked for every transaction, it adds to the processing time.
    I do not need an exact date/time stamp for each transaction in the batch, I could use the same one for all the transactions. That would require the TIME_STAMP global variable to be populated once, at the job level, at the beginning of each batch.
    Any suggestions?
    Thanks.

    Hi Gaetan,
    Try using a BatchBannerBeginScript to populate a GVM with the date/time, and then reference this GVM in your APPIDX.DFD. In this manner the value will be updated at the start of processing for each batch rather than each transaction. Or, consider the possibility of adding the transaction date/time into the extract data and then sourcing from that point. Either should work. In my experience most customers prefer that the archive date/time come from the system of record rather than the time the transaction was archived -- unless of course the customer actually wants to record the time the transaction was archived, in which case the method I've described above should work.
    Enjoy!
    Andy

  • How to convert time stamp to time in update rule

    Anybody know how to convert time stamp to time only?  Any FM that I can use?
    time stamp example
    20010203100201
    Result:
    10:02:01
    Thank
    Sudree

    Please search the forum

  • How to setup SSL cert for SharePoint apps in a three tier farm with nlb

    I am having trouble understanding how to setup the SSL certificate on SharePoint apps or in general its configuration

    Please check the below thread..
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/53465d30-10b2-48c9-9541-5ade738156b4/how-to-setup-ssl-cert-for-apps
    Don't forget to mark it as an Answer if it resolves your issue and Vote Me as helpful if it useful.
    Mahesh

  • How to setup Data guard for SAP database?

    Can someone please tell me how to setup data guard for SAP databases?
    Thanks,
    Abhi

    Hi Abhi,
    have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
    14
    Oracle Data Guard
    You can use "Physical Standby".
    You cannot use "Logical Standby".
    You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
    You can use Data Guard Broker.
    You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
    In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
    Maximum Protection causes the primary database to terminate if problems occur in the standby database.
    And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
    Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
    regards
    Kay

  • SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?

    Hello IDM-experts,
    where can my customer find information about
    SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?
    Customer situation description:
    The situation is that we are using SAP IDM 7.2. We are using a functionality to allow our users to access a webpage from where they can gain
    SSO access to the Abap systems via the SAPGui. See screenshot as an example.
    Now what we want is to access the CRM and GRC WebUI also with the same SSO possibility. We cannot find any guide/best practice on how to do
    this or if it is possible via SAP IDM 7.2.
    You can see a weblink in the first screenshot but it does not work. It will ask you for a username and password, see second screenshot.
    Kind regards,
    Daniela

    Do you know how the SAP GUI SSO is setup ? Is it using SNC/Kerberos ?
    If it is (I suspect it is), then you will need to use similar method of authentication for the ICF Services. These cannot use SNC since they are accessed via browser, but what you want is possible.
    Thanks
    Tim

  • HT2513 Is there a way to see who made an appointment and at what time/on what date they made it? Kind of like a date/time stamp for our network calendar?

    Is there a way to see who made an appointment and what time/on what date they made it? Kind of like a date/time stamp for our network version of iCal? Everyone has all rights and privledges to everyone else's calendar, and sometimes we need to know who did what to whose.

    Christine,
    You can also ask in the Typography forum,
    http://forums.adobe.com/community/design_development/typography?view=discussions&start=0
    The guy running whatfontis is a regular poster there.
    And apart from
    http://www.whatfontis.com/
    there are
    http://www.identifont.com/
    http://new.myfonts.com/WhatTheFont/
    and especially for script,
    http://www.bowfinprintworks.com/ScriptIDGuide.html

  • How to use time capsule for wireless back-up but not internet?

    Hello,
    I have a tower and recently a laptop at work. The tower is connected to our local network with an ethernet cable and the laptop with wireless. So, the internet connection is fine for both.
    I was hoping to use my time capsule to do time machine backups on my laptop. Do you have any advice on how to configure this? I do not want to use the time capsule to extend my Internet, as I believe my work I.T. would prefer to handle all access to their  network.
    Perhaps there is some documentation about doing this that you could point me to? I have not been able to find it.
    Thank you for your help.

    Your original question was How to use Time Capsule for wireless back-up but not Internet?
    There is no reason for you to connect the tower....or anything else...using Ethernet if your goal remains that same as you stated.
    If you are asking if you can backup the Tower using Ethernet, and not wireless, then you can connect the tower to one of the LAN <-> ports on the Time Capsule....not the WAN port.
    Yes, it appears to work without plugging into my tower.
    Correct, it will work.
    I just have to select the network that it created. Of course, I have no access to the Internet while this is happening and it can not auto backup, unless I am on that wireless signal.
    As I stated, that is the downside to trying to back up without an Internet connection.  You have to establish another network...and backup over that network.
    If you are asking if you can stay connected to the work network while also backing up to your non-Internet "private" network, that is not possible.

  • Is there a way to turn on time stamps for all text messages?

    I want to time stamp all my messages not just select ones...is this possible

    Just swipe the text bubbles to the left to see time stamps for all messages you sent.

  • Why is the time stamp for delivered  vtext off by one hour?

    Why is the time stamp for delivered  vtext off by one hour?

    This is  a known bug. After midnight it will correct itself. Apple is aware of it.

  • How to find the time stamp for delata

    Hi Analysts,
    I am loading data from R/3 to InfoProvider(Cube or ODS) with delta update.
    I have seen nodata was loaded to InfoProvider. But data was available at DataSource. then new delta is started. i want to load the last delta again.
    How to see the time stamp of delta?
    How to load that delta data?
    Please help me in this need.
    Hari.

    Dear Srihari,
    if your last delta failed then you can request it again by calling the same delta infopackage again, it will ask for repeat delta (in case last delta has failed), go and run it.
    this way you can have your delta figurs back, and do upload via PSA.
    Hope it helps.

Maybe you are looking for

  • File from Application server into BW

    Hi All, I have a urgent requirement and I do not know much of ABAP The requirement is selecting existing file from application server Dynamically in BW server. This will be done by writing an ABAP code at the InfoPackage level in the External Data Ta

  • How can I add a UserGroup input in an APEX Login Page

    Hi, I am willing to add a UserGroup input (dropdown) in APEX Login page, but I see the default Login page supports only two parameter, i.e. Username and PWD. I see the authentication function wwv_flow_custom_auth_std.login( P_UNAME => :P101_USERNAME,

  • How to get ME23 screen using selection-screen

    Hi, I am trying to get the ME23 screen using selection-screen with following code. select-options: purordno for ekko-ebeln NO intervals. SUBMIT SAPMM06E VIA SELECTION-SCREEN . But at the time of execution i got this error "INCORRECT PROGRAM TYPE WITH

  • Step by step lease-in contract

    Anyone please guide.

  • Web Dispacher, deactivate a particular node how to?

    Hi,   Is there any property that can be set in the Web dispatcher profile or the message server, which can stop sending any request to a particular J2ee instance in the cluster? The business requirement is that one server (node) in the cluster should