How to setup timecard auto approval for ceo...no supervisor

we are currently running approvals on timecard based on supervisor
the ceo does not have a supervisor and we would like it to autoapprove
we are having trouble getting it working
any thoughts ideas? how have people done this?

also
u can use
NOTE:
You have "OTL: Defer approval process on timecard submission" profile set to YES -
which means notification will be sent to the approver only after "Workflow Background Process" has been run.
and
1. Log into 'System Administrator' responsibility
2. Navigate to: Profile > System
3. Check 'Responsibility' checkbox and enter the responsibility you are using to run 'Workflow Background Process'
4. Enter "PA: AutoApprove Timesheet" in the 'Profile' field and hit 'Find'
5. Set "PA: AutoApprove Timesheet" profile to YES at the responsibility level. Save the changes.
on user
Regards,
Khalid Seif
HRMS Lead Consultant
[email protected]

Similar Messages

How to setup a release strategy for store generated purchase order

Hi there,
Does anybody know how to setup a release strategy for store/plant generated purchase order? I have a request from our client, but I never cross this before. Please help and let me know the step with every single detail.
Greatly thank for your help.
Kind Regards,
2tea

Please go thru the below Release Procedure and check whether you have maintained all the settings properly.
PO RELEASE STRATEGY
The release code is a two-character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
e.g. If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
CT04 - Create Characteristic e.g. NETVALUE
Click Additional data Table name CEKKO Field name GNETW and press enter
(for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
In the Basic data (X refers to tick),
X Mutliple values
X Interval values
In the Value data, in the Char. value column, type >10000 and press enter
Save your data
CL02 - Class
Class - Create REL_PUR
Class type - 032
Click Create
Description - Release Procedure for Purchase Order
In the Same Classification section, click Check with error
In the Char. (characteristic) tab, type NETVALUE to assign your characteristics to the class
OMGS - Define Release Procedure for Purchase Order Type
Release Group - New entries
Rel.group Rel. Object Class Description
02 REL_PUR Rel. Strategy for PO
Release codes - New entries
Grp Code
02 01
Release indicators
Release indicators Release Description
0 Blocked
1 X Release
Release Strategy
Release group 02
Rel.strategy 01
Release codes 01
Release status 01
Classification Choose your check values
OMGSCK - Check Release Strategies
(make sure there are no error messages)
Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
The person with the release authorization have to use ME28 to release the Purchase Order.
Regards,
Ashok

Auto approval for self registration request in OIM 11G R2

Hi all,
We have a requirement where we want end users to be able to self-register without needing any sort of approval. We are using OIM 11G R2 with the latest patchset.
The way to do it in 11G R1 is explained in the following document:
[http://docs.oracle.com/cd/E21764_01/doc.1111/e14316/unauth_selfservice.htm#BABFEIBF]
But now that R2 does not have any request templates, we are not sure how to do this. Any help will be greatly appreciated. Thanks for your time.
-sandeepc

refer this.
Configuring Auto-Approval for Self-Registration - Fails due to Organisation

Block auto-approval for initiator of project

We have a need to requirement to block auto-approval for initiator of project invoices if he or she is also an approver.
Please can someone clarify if this can be done using functional setups or WF customization is required.

refer this.
Configuring Auto-Approval for Self-Registration - Fails due to Organisation

How to setup a company code for material management

Hi,
While creating material in MM01, in sales org tab, when I gave plant XXXX, it is giving an error "Company code YYYY is not setup for material management".
So can you help me , how to setup a company code for material management
Help is appreciated
thanks
DIL

Hello Sendil,
You can maintain it with trns code OMSY or MMPI/MMPV.
Hope this helps
Regards
Arif Mansuri

How to setup a global artwork for a TV Show

Hi, I've a TV Show composed by 45 episodes where each one have his artwork but I don't know how to setup a global artwork for the TITLE of the TV Show while retaining the 45s artworks.
ie. when watching the Tv Shows (library on iTunes) I would like to see the global artwork of the Tv Show that is different of the other 45s episodes contained.
Bye, Roberto.

Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
Here is the specific page http://foundation.zurb.com/docs/components/grid.html
The default values are
Em-base : 16px
Row width: 62.5em (62.5em x 16px = 1000px)
Columns per row: 12
These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

How to setup a default direction for new divs in fluid grid layout in dreamweaver?

Hi,
how to setup a default direction for new divs in fluid grid layout in dreamweaver? I am an RTL interface user, I need my new divs to be inserted from right to left not Left to Right! could it be in dreamweaver?
Thanks.

This may get me into strife, but my experience is that you are better off finding another platform for your RWD.
The framework that I tend to use is by Zub-Foundation http://foundation.zurb.com/.
A commercial product that I have come to appreciate can be found here http://www.projectseven.com/products/tools/composer/index.htm. Please do not mention me if you happen to choose this product.

How to setup a default size for new divs in fluid grid layout in dreamweaver?

Hi,
how to setup a default size for a new divs in fluid grid layout in dreamweaver? I don't need the default size for new divs as a 100% width, I need them 13.69% as a one coulmn width only (7 coulmns fluid grids layout for desktop size 1000w).
This problem I've faced when I intended to insert dozens of fluid grid divs in the layout.

Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
Here is the specific page http://foundation.zurb.com/docs/components/grid.html
The default values are
Em-base : 16px
Row width: 62.5em (62.5em x 16px = 1000px)
Columns per row: 12
These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

How to setup the Airport Extreme for PSP?

Can anyone tell me how to setup the Airport Extreme for PSP? I have been searching the Discussions but none of the posting seems to explain detail enough. A step by step guide would be very appreciated. Thanks.
PowerBook G4 Mac OS X (10.4.3)

Sorry, I forgot to mention a few points:
1) I don't have the Airport Extreme base station;
2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

How to setup the airport extreme for window xp

How to setup the airport extreme for window xp

Sorry, I forgot to mention a few points:
1) I don't have the Airport Extreme base station;
2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

How to setup gmail push notification for my iphone 5?

I'm using gmail. Prompt respond for mails is very urgent for me.
How to setup gmail push notification for my iphone 5?

I switched from a BB to an iPhone a few days ago and I knew I was going to miss the QWERTY keyboard but then I also discovered that my GMail doesn't 'push' to my iPhone. I was used to 'push' for all mail accounts on the BB. I also missed being able to personalize text, email, and phone tones for individuals.
I tried the Gmail app for iOS and it does deliver Gmail to the iPhone app quickly but the text is tiny and when it is a web page it's almost impossible to read.
So, I have worked out a kludge to get around these problems.
I added my exisiting Gmail account to the iPhone.
Hotmail does push to iOS 7 so I created a Outlook account (could be hotmail or Live) using the web browser.
I added the hotmail account to the iPhone. I basically use this to give fast notification of important emails on my iPhone.
On my macbook email client I created a rule that 'redirects' incoming mail to the hotmail account. The 'Redirect' is important since the email will show up in the hotmail account on the iPhone as coming from the original sender and you can then respond to the original sender from the iPhone, though the sender will see it as coming from the hotmail account.
The other downside is that you will get a second copy of the email in the gmail inbox on the iPhone, probably 15 minutes later.
If you don't want all of the mail being redirected you can create a 'redirect' group in the Address book and then adjust the rule in Apple mail to only redirect the mail to the hotmail account if the sender is in the redirect group. You can add and delete contacts from this group depending upon which ones you consider to be important. You will still get two copies of the email on the iPhone, one in the hotmail inbox and one in the gmail inbox.
You can prevent this from happening temporarily by turning off, but not deleting, the gmail account on the iPhone. You could then edit the emails on the Apple email client before turning the gmail back on in the iPhone.
And finally if you use the VIP feature in email on the iPhone you can create a list of VIP contacts and then assign a different notification sound for the VIP's. So in effect important contacts mail will be redirect to the iPhone for quick notification and very, very important contacts will have a different notification sound.
I'm basically using the Hotmail account as a notification tool and basically delete all the emails in it since the original copy will be in the gmail account.
And best of all it's all free, except for the bandwidth.

How to Implement N-Level Approval for Bid,Live Auction,PO,Contract ?

Hi Experts,
I am new to SRM 5.0. My requirement is how to implement N-Level Approval for Bid, Auction, PO and Contract? Which steps should I follow for N-Level Approval? Can any one send me sample code and name of BADI where I have to implement the code.
Abhijeet Panse

Hi
Please check for <b>BBP_WFL_APPROV_BADI</b> using SE18 transaction for relevant Code as well and standard SAP documentation.
Related sample code and other useful pointers ->
WS14500015 is not working for Multilevel approval
Re: SRM / Shipping cart
Re: N Step Approval BADI - BBP_WFL_APPROV_BADI
Re: N-step BADI workflow
http://help.sap.com/saphelp_srm50/helpdata/en/8b/4fa9585db211d2b404006094b92d37/content.htm
http://help.sap.com/saphelp_srm50/helpdata/en/2c/e68d406b305537e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/17/40a86c773d6c41801d78af1a34b90f/frameset.htm
Multiple Implementation For BBP_WFL_APPROV_BADI
Re: Help needed on N-Step Approval WFL for SC
Re: N-Step 14000109 workflow - Unable to identify Approvers
Do let me know.
Regards
- Atul

OIM 11gR2 PS1: Need to configure auto approval for self registration

Hi All
I need to configure auto approval for self registration in OIM 11g R2 PS1. I have done this in R1 but looks like it is different in R2.
Can you please guide me or point me to some blog/guide.
Thanks

check this link:
Developing Workflows for Approval and Manual Provisioning - 11g Release 2 (11.1.2.1.0)

How can setup the outgoing email for ipad2?

How can setup the outgoing email for ipad2?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
 Cheers, Tom

PURCHASING-How to change the next approver for the Purchase Requistion(PR)-

Hi All,
Could you please let me know how to change the next approver for the Purchase Requistion(PR) from User "X" to "Y", as Y was manager of "X" and 'X' left the organization. how can i acheive this? can you please let me know the process ?
Thanks,

Hi,
You have not mentioned the version you are using (11i or R12).. Are you using iProcurement... ? Are you using positional or Employee-Supervisor hierarchy..?
Your question : How to change the next approver for the Purchase Requistion(PR) from User "X" to "Y", as Y was manager of "X" and 'X' left the organization.
Ans: You can achieve this through below workarounds
- Through *"Mass Update of Requisitions" functionality* (Conc. request) you can update the Approver name from User "X" to "Y" for existing PRs.
- Replacing the Supervisor name of the requestor/requisitioner in the HR record (assignment) from User "X" to "Y"..
Hope it helps.
Kind Regards,
S.P DASH

How to setup timecard auto approval for ceo...no supervisor

Similar Messages

Maybe you are looking for