How to setup usb card in pci express slot

how to setup a usb card in a pci express slot,

Is that what the real original question was?
Do you already have and tried it? going by what you read?
Do you want a recommendation on a card?
I think I provided two in a thread at same time you posted: Sonnet I trust
I have FW800 PCIe in 1,1
I always connect kb/mouse either direct or via Apple Cinema

Similar Messages

  • Mac Pro doesn't recognize USB 3.0 PCI express card

    Mac Pro doesn't recognize USB 3.0 PCI express card.  Does it need specific drivers? 

    I did a little searching for that card.  The more I looked at it the more I felt that, yes, it needs a driver, and no, one doesn't exist for the Mac.  So it looks like that is a card only supported for PC's. But to be sure, if I were in your place at this point, I would contact MSI directly.

  • Will NI Offer CANbus card for PCI Express

    This is really a question for marketing. Will NI offer a CANBus interface for the upcoming PCI Express slot, (or Expresscard slot) that is supposed to replace PCI and PCIMICA on future PCs? If so, when? If not - a USB to CANBus instead?

    Hi PPH,
    please understand that those kinds of things cannot be discussed or disclosed in a public forum. You might want to talk to your local field sales engineer (or local branch office) about requirements you have that current National Instruments products do not fulfill.
    Regards,
    -B2k

  • MSI Gaming 9 AC - PCI Express Slots Position

    Hey guys,
    Just recently I finished setting up my new machine (even got a problem while updating the BIOS on the mobo, which has been solved with the support from folks of this forum =D) and then after I while using it, I realize that the space between the first and second PCI express slot is just so small, it's my first time running a SLI machine, got two GTX 970 G1 Gaming from Gigabyte and they are so close to each other that after installing some monitoring programs, I can check that the temperature on the first card (the one with no room to breath) goes almost instantaneously to 79ºC~80ºC when playing a high demanding game while the second stays around 64ºC~65ºC, with both cards running at 100% fan speed.
    And since the standard thermal limit of the GTX 970 is 79ºC, the gpu clock goes way down from almost 1400 mhz to 1100 mhz to cool it for a while and then boost it again, turn it down to cool it again (and again, again again), there is a noticeable difference of fps while this is happening so I don't know if that is something that is suppose to happen on SLI system or if the cards are really too close to each other, I have check some other motherboards and even the Gaming 7 AC has those two first slots with more space between then.
    Is not possible at all to use the third slot to SLI on this mobo to make it work on 8x? There is a solution or some sort of modification to address this? I attached a pics to illustrate it better too.
    Thanks!

    Thanks for answering guys, my case is a Corsair Obsidian 750D, so there's plenty of space and also two front in-take fans and one exhausting on the back (I also have a Corsair H100i cooler for the CPU and when gaming, set the fans to maximum speed), in some cases I see almost 20ºC of difference between both cards, yesterday I set the temperature limit a little bit above the standard 79ºC to 82º and while the main card was running on constant 82ºC, the second was somewhere between 62 to 64 degrees, I'm kinda worried about this temps and how it could affect the cards, if they are heating way beyond they should and it if could impact the durability of the physical components, cause a sudden malfunction or literally fry something. Am I worrying too much about it?
    It's a shame that it seems to be really difficult to find a XPower AC Z97 board here in Brazil, MSI could have also leave a little bit more of space like the Gaming 7 has, there's a technical reason on why they leave the PCI slots closer to each other on the 9 comparing it to 7?

  • Ideacentre k330B Motherboard, CIH61M v1.0, what PCIe-express slot is it? 1,2 or 3?

    I have an Ideacentre K330B and the MoBo is CIH61M v1.0, I want my video card and i'm curioius as to what PCIe-Express slot it is. Is it PCIe-Express 1,2 or 3?

    There is no BIOS in OS X. There is only the EFI stored in ROM that is not user modifiable. OS X is probably checking Bay 0 for the boot drive since that is where it should be. It won't check the Tempo drive since it is treated like an external drive. I suggest you open Startup Disk preferences to see if the Tempo device is selected as the boot device. If it isn't, then select it. That will probably shave off a few seconds in the startup time.

  • IdeaCentre K230 - Doesn't detect graphics cards (in PCI-E Slot)

     Hello,
    I bought a IdeaCentre K230 like 1 or 2 weeks ago and tried to install a graphics card. It did not work. Is it possible this motherboard (the stock one that came with the desktop) does not detect it as it does not show in the Device Manager? Because it didn't detect an Nvidia one i had before. Sorry I am real new to this hardware stuff.
    So I purchased a ATI Radeon HD 4670 graphics card today and tried to install it. I first disabled my on-board graphics driver(s)/adapter (Intel(R) G33/G31 Express Chipset Family) and then I powered off my computer, opened the case, installed the 4670 into the PCI Express slot and put the case back into it's place.
    Then I turned on my computer and it was a 800x600 resolution. So I went into Device Manager and checked Display Adapters and I did not see the Radeon. So I opened the CD/DVD drive and inserted the CD that came with the graphics card. Then I ran the installation and it said "Installation complete. Errors have occurred" (or something to that effect). So I was like *** I'm pissed since this is the second card I have tried (previous being an Nvidia). And I'm not sure if I needed to plug the DVI cable for my monitor into the card so I did that and restarted and nothing showed (however I did hear the fan running, so it does have power). So then I plugged in the standard VGA into the adapter thing that came with it (that you plug in a VGA and then you plug the adapter into the card outputting a DVI signal thingy??), got nothing. So then I plugged the VGA into the one that is not on the card but on the computer itself. Then display showed (again, in 800x600). I am sure that the card is physically installed properly as I hear the fan running, and see it running. I also might add that the graphics card does not require additional power as it gets its power via the PCI Express port.
    Please, PLEASE help me as to what I am doing wrong.
    The Nvidia 9600 GSO did not work because the motherboard did not detect it (according to Geek Squad @ Best Buy). I am afraid that might be the problem of this one too. But I really want a good graphics card to work in my computer.
    Computer Specs:
    Pentium Dual-Core CPU E5200 @ 2.50GHz (5.00 total GHz)
    6.00 GB ram
    Windows Vista 64-bit

    I wouldn't say that the power supply would be the problem. It would definitely keep the graphics card from reaching it's full potential.
    Generally you would do the following....
    Power off computer.
    Flip the switch on the power supply to off.
    Open case.
    Insert the card into the PCI-E x16 slot.
    Connect VGA/DVI to graphics card. [If required, connect power supply to graphics card. But I see this is not the case.]
    Boot up computer.
    Install driver.
    Adjust resolution/settings.
    Enjoy.
    Try reseating the graphics card.
    Message Edited by ortegaluis on 03-16-2009 08:54 PM
    \\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

  • I have a late 2008 unibody Macbook Pro with PCI express slot.

    I have a late 2008 unibody Macbook Pro with PCI express slot, running MAC os 10.6.8 . also I have a Sonnet Tempo Sata Express card plugged in. but only one port works at about 100/mbs with an external HDD.  2nd port wont work, anyone can explain? thank you for your help!
    (Ps: the port at the bottom of the express card works, one on top doesnt)

    AirPlay Mirroring is compatible with OS X Mountain Lion > http://support.apple.com/kb/HT5404 Make a backup, open App Store and purchase OS X Mountain Lion

  • [MSI-K8N-SLI-FI] Primary PCI-Express slot dead ?

    Hi,
      Early this year with 8800GT plugged in the primary PCI-Express slot would fail to output the video, so I had to revert to my old 6600GT and it worked fine till now that is. I had verified my 8800 GT on different system and it booted just fine.
      Now all of a sudden even 6600GT failed to output the video. So, I tried another slot (courtesy SLI) and the system works fine.
      Issue: PCI Express width is shown as x1 instead of x8/16 ?
      Is there a way to repair the first slot or force x8 on second slot.
    regards,
    Prashant

    Quote from: Henry on 30-May-10, 02:59:09
    Is the MB chipset fan running OK or is it slow or stopped? Any problems with other things controlled by the chipset?
      Yes, chipset fan seems to be running just fine, will have to check the speed though. USB ports are working fine. What else should I check ?

  • I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4.  Question 1: Does this model have a PCI Express slot?  Question 2: Can I upgrade my USB2 port in this laptop to a USB3 port? Appreciate your help & advice..

    I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4.
    Question 1: Does this model have a PCI Express slot?
    Question 2: Can I upgrade my USB2 port in this laptop to a USB3 port?
    Appreciate your help & advice..

    No & no.

  • Can i install a usb 3.0 pci express card in a mac pro 2008

    Can I install a PCI express USB 3.0 card in my Mac Pro 2008?  Will it support the higher speed?

    No.

  • How to setup wireless printing with AirPort Express?

    Hey, I just bought a AirPort Express today and I can't figure out how to setup the usb wireless printing. Could someone explain in detail on how to do this? Thanks-Michael
    I have a Windows 7 64-bit PC and a Hp Deskjet F380 USB printer.

    Download the install Bonjour Print Services for Windows v2.0.2
    Run the program. Hopefully, your printer will be recognized.
    If it is, "install" the printer and try to print.
    Keep in mind that if you have an All-in-One type of device, that only the print function will be supported.
    Advanced features like copy, scan, maintenance, etc are not supported. You will need to connect the All-in-One directly to your PC if you need those services.

  • How to install USB card in Mac OS 8.6?

    Recently, i buy a new printer. the printer only can use USB connection. My MAC is MAC 8500/1800. It is no USB port. i added a USB card. But it is not work. I find information on internet. It need installed a software(USBSupport1.4.1smi.bin). I downloaded the software. But it can not open. i hope some people can help to solve the problem.
    Thank you very much for your help.

    Hello tytom2003,
    Welcome, and Happy New Year!
    First, make sure your printer and USB card are Mac compatible.
    Second, you will probably have to re-install your Operating System in order for your Mac to "see" your USB card. You cannot install the proper USB and USB support extensions by downloading them, because your Operating System will not "see" them, will not recognise them.
    You should perform a "clean reinstall" (also known as "archive and install") from your original installation CD - or from a retail, full install CD, with the USB card installed in its PCI slot. Your Mac will now automatically "see" or recognise the USB card, and will see the need to install the USB extensions.
    By doing a "clean install", you will have a newly installed System Folder and the old, disabled 'Previous System Folder' next to it. You will not lose anything, as all your old applications and documents will be saved in the 'Previous System Folder' where you may retrieve them and drag them over to your new System Folder.
    I assume you are running OS 8.6, but it doesn't really matter. The OS CD will install the correct USB extensions. (An OS9 CD might install 1.4.6 extensions - whatever it installs should work).
    I did not have your exact model, but rather a 7300 and several beige G3s, but the procedure is all the same.
    It is also possible to do a 'Custom Install' or install by 'Tome Viewer' utility.
    Let us know if it works.
    I hope to have been of some help. It will have been an honour.
    Jon
    Message was edited by: Jon Smith

  • MSI 8800GT cards on PCI Express 1.0a mainboards

    Hello everyone
    I hope it's the right forum here to ask that.
    I read that many if not all 8800GT graphic cards have problems with older mainboards that use PCI Express 1.0a (like in my case the epox EP-9NPA+SLi). With the right BIOS on the graphics card they work flawlessly however. Now I wonder: Are the 8800GT from MSI equipped with such a BIOS?
    Thanks in advance,
    Dennis

    Quote from: cleaner on 30-January-08, 11:04:44
    Is that a 100% will work kind of "should be fine"?
    I'm a bit afraid of buying a card that won't work in the end and will cause a lot of hassle...
    Well can tell you for sure that NX8800GT-T2D512E-OC(http://global.msi.com.tw/index.php?func=proddesc&prod_no=1343&maincat_no=130&cat2_no=136) works in K8N Neo4-F (PCB 3.0){PCI-E 1.0a) (http://global.msi.com.tw/index.php?func=proddesc&prod_no=249&maincat_no=1)
    works like a charm.

  • LenovoEMC px4-300r and pci-express slots

    Hi!
    Court of photos inside him there is an established slot pci-express. Prompt it operates (works)? I want to install pci-express card fiber channel.
    Link to picture
    Moderator note; picture(s) converted to link(s) About Posting Pictures In The Forums

    Hi edgi,
    The  PCIe slots are intended for network interface cards such as a 10GbE card. However, I have not heard of anyone installing a fiber channel before.
    Have questions and need answers?
    Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
    LenovoEMC Support & Downloads
    LenovoEMC North America Support Contact Page

  • How to determine what card is in what slot of a PXIe-1073 unit programmab​le

    How can i programmable determine what card is in what slot of a PXIe-1073 unit I have a PXI-4063 and a PXI-2503 in a 1073 chassis. I use the DAQmx Device Product Type to to find the 2503 matrix card but it woun't return the 4065 product type.

    Hi cjp1,
    The KnowledgeBase article Programmtic PXI Slot Detection walks you through the steps to do this. There is also a community example called Read PXI an PXIe Card Serial Numbers Programatically that demonstrates the type of LabVIEW architecture you can use to do it. 
    You should first ensure that all of your modules can be identified and self-test in MAX. 
    In case the above hyperlinks don't work, you can copy-paste the addresses below:
    http://digital.ni.com/public.nsf/allkb/2342900AED0​2975A86256BD800764C8B
    https://decibel.ni.com/content/docs/DOC-20207
    Jeff Munn
    Applications Engineer
    National Instruments

Maybe you are looking for

  • How do I get my contacts from Droid Bionic to iphone 4?

    How do I get my contacts from Droid Bionic to iphone 4?

  • Methods in XML--pL help

    I have string...as String xstr="<?xml version=\"1.0\"?>\n"+ "<UserGroups>\n<u_bit><![CDATA[1]]></u_bit>\n"+ "<u_title><![CDATA[public]]></u_title>\n<u_description><![CDATA[Pages are available to all visitors - no restrictions are applied]]></u_descri

  • Inserting millions of records into new table based on condition

    Hi All, We have a range partitioned table that contains 950,000,000 records (since from 2004) which is again list sub-partitioned on status. Possible values of stauts are 0,1,2,3 and 4. The requirement is to get all the rows with status 1 and date le

  • Access parent class from instance of nested class

    Hi, I have the following class hierarchy: public class BaseClass public class ParentClass   private NestedClass    mNestedClass;   public ParentClass()     mNestedClass = new NestedClass();   protected NestedClass getNestedClass()     return mNestedC

  • Replace cd drive in a G4 Xserve

    I have one of the original Xserve with only a cd drive. Can I replace it with a combo or superdrive? It is needed for software installs. If not what is the best way to connect a BOOTABLE DVD drive?