How to setup Wireless Clients MAC+Active Directory based acess

Dear Gents,
I want to setup Wireless Clients MAC+Active Directory based acess on AP 1242 standalone Wireless series .
Steps i have configured :
1) SSID manger under Open authentication : Selected with EAP.
2) under advacned Radius : s
MAC Address Authentication
MAC Addresses Authenticated by:
Authentication Server Only
3) Server Manger : Current server list
added the radius ip address 10.1.200.x
EAP Authentication
MAC Authentication
Accounting
Priority 1: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 1: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 1: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 2: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 2: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 2: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 3: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 3: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
Priority 3: < NONE >10.113.253.1010.1.200.23410.8.200.1510.15.200.15
From ACS - Radius we have choose a Group x( named as Mac-address group )
All the wireless Client ( laptops ) mac-address are added as add username option and enter username
as mac-address & enter the mac-address as pwd second option of password TAB.

Hi Akber,
I think you didnt understood what i was trying to say here :-( No problem..I will explain my theory again.Your requirment is to autheticate user from ACS internal database (you have already added the MAC address as the username on your ACS internal database) as well as from ACS external database (in your case this is AD).
What i was saying is when when authetication request comes to raidus server it checks its internal database and if it find a valid username and password (here it will the MAC address and password which you have entered to the ACS database) the ACS will not query the external database (in your case the AD) for authetication.
You can not have ACS to look in to both MAC and AD database at the same time.
Hope this clears your doubt.
Regards
Najaf

Similar Messages

Best way to integrating mac os x client with Active Directory

Hi hello
What is the best way to integrating mac os x client with Active Directory ? i have one Lion Server
For the Mac client i want Mac use Active Directory for authentification and Lion Server for manage preference.
Tell me in lion server the magic triangle is it good for what i want do ??

If you have a need now and that need will remain serviceable long enough to justifying the investment, then go with Lion Server and do the Magic Triangle. This is nothing more than Binding OS X Server to your AD domain and kerberizing services. Then bind your workstations to AD first, then OD. Make sure you download Server Admin Tools for Lion. This gives access to Workgroup Manager. That is were you will manage your OS X Settings.
If you are managing more than 50 Macs that need a lot of continued management, then look at JAMF.

How to save HR data in Active Directory using ABAP i.e thru LDAP Connector

Hi All,
       Can any one please help me out how
       to save HR data in Active directory
       using LDAP Connector ?
       Please help ASAP as it is very urgent .
Thanks
Jitendra

There are 100 of such scripts are there online.
here are few tips and codes. you will get more.
https://gallery.technet.microsoft.com/scriptcenter/Feeding-data-to-Active-0227d15c
http://blogs.technet.com/b/heyscriptingguy/archive/2012/10/31/use-powershell-to-modify-existing-user-accounts-in-active-directory.aspx
http://powershell.org/wp/forums/topic/ad-import-csv-update-attributes-script/
Please mark this as answer if it helps

How to save hr data in Active directory using abap

Hi all
can any one please help me out how to save hr data in Active directory using LDAP connector
please help as this is very urgent requirement
thanks in advance
Thanks
Chanti

What form do you have the user's name in ?
ANTIPODES\alberteString searchFilter = "(&(objectClass=user)(samAccountName=alberte))";[email protected] searchFilter = "(&(objectClass=user)(userPrincipalName=[email protected]))";Albert EinsteinString searchFilter = (&(objectClass=user)(givenName=Albert)(sn=Einstein))";or using Ambiguous Name Resolution (anr)String searchFilter = "(&(objectClass=user)(anr=Albert Einstein))";or it's even clever enough to useString searchFilter = "(&(objectClass=user)(anr=Einstein Albert))";

How to setup the client application for the RMI?

Question:
I write a short program of RMI It contain server and client
if server and client are run on localhost they are running ok
but run client application on remote machine it occure issuses.
How to setup the client on remote machine?

hello Dhanraj K, for gmail accounts there shouldn't be much manual configuration required. please try to set it up like described in [[Add an email account to the Mail app in Firefox OS]]

How to setup face time mac to mac

how to setup face time mac to mac, does the other mac need a different apple id from the other

I've done same thing but again and agin showing call failed its just not happening.i've got only one FaceTime enable contact , I don't know whether d issue with tht ph or mine.couldnt hv any option to check with other contact

How to setup mail client in Data Integrator 11.7 to make use of mail_to()

How to setup mail client in Data Integrator 11.7 to make use of mail_to() function.
I am using mail_to() function in one of my job to know the status of source file. If source file is not ready, our DI job should fail and send mail notification with reason for failure.
But mail_to() function is not sending any mail. I guess I need to set up email client.
Any one please help to resolve this issue.
Thanks
Phani

From the DI documentation that comes with the installation:
To use this function, a mail client must be installed and running on the Job
Server computer that calls the function. The login account for the mail client
must have the same user name and password as the Data Integrator service.
The type of client varies by the operating system:
u2022 If the Job Server is on a computer running the Windows operating
system, then the mail client must comply with MAPI (message application
programming interface). In addition, the mail client must be configured as
the default mail client. For example, Microsoft Outlook is a MAPI-based
mail client.
If the Job Server is on a computer running the UNIX operating system,
then the mail client must be mailx-compliant.
So:
Mail client installed and configured and set as default
Mail client uses the same credentials as the job server service
Or use another function: smtp_to();
If still not working or you are not allowed to use an installed mailclient on your box, then try Blat: http://www.blat.net/

Change to active directory based security

Hi,
I have installed and configured Essbase with shared services based security and not in standalone mode.
The client is now wanting to use active directory based security.
I have seen John Goodwin's (I'm not worthy!) excellent blog on active directory with standalone ( More to life than this...: Standalone Essbase using external authentication ), but as stated I am not on standalone.
Can anyone advise me how the config differs from what you need to do in standalone mode and also how to reinvoke the configuration tool post install / configuration?
Many thanks,
Robert.

You can add the external directory in Shared Services at any point.
Just follow the documentation - Oracle Enterprise Performance Management System Security Configuration Guide
Cheers
John
http://john-goodwin.blogspot.com/

I have a task, that is i want to retrive the details from active directory based on name and i want show that details into grid view.

Hi All,
I have a task, that is i want to retrive the details from active directory based on name and i want show that details into grid view.
Can any one help how to start.
Thanks in advance!

Hi AnilKarthik,
You can get user details by name using DirectoryService namespace. Then you can create a DataTable to restore the information and then bind to the SharePoint GridView.
Here are some deatiled code demos for your reference:
how to get userdetails from Active Directory based on username using asp.net:
http://www.aspdotnet-suresh.com/2011/03/how-to-get-userdetails-from-active.html
How to get User Data from the Active Directory:
http://www.codeproject.com/Articles/6778/How-to-get-User-Data-from-the-Active-Directory
Using SPGridView to bound to list data in SharePoint:
http://nishantrana.me/2009/03/23/using-spgridview-to-bound-to-list-data-in-sharepoint/
Best Regards
Zhengyu Guo
TechNet Community Support

Mac - Active Directory limitations?

Hi,
a client of mine has a 99% Windows environment based on Windows 2003 AD architecture. The last percent are Macs and Apple claims : "...Mac OS X builds in support for all of Microsoft’s proprietary Active Directory services". And then "..This means Mac computers work with Active Directory in much the same way Windows clients do...".
this sound very good to me, but are there limitaions for the Mac user regarding the AD services that the Windows client gets? Or is the Mac a 100% full member of the AD as the PC?
TIA
/Mans
iMac G5, iMac 450 DV, iBook 300 Mac OS X (10.4.8)

This page should answer all your questions:
http://macwindows.com/AD.html

How do assign mutiple client Macs my new Printer List? What do I copy over?

The only thing that changed is our IP addresses. We moved. Same Printers & Same Macs, just new IP addresses. I want ARD to delete every clients printer list and apply my new Printer List that I created on my Admin ARD Mac. All my printers were 'Printer Browser' created under the IP Printer tab, using protocol LPD. I really don't want to login to each client Mac and do each one individually. What do I copy from local to my 46 clients?? Desparate :-P
G5 Quad 2.5 Mac OS X (10.4.10) ARD v2.2

There is a document that talks about how you can configure printers with Apple Remote Desktop. It is based on older versions of Apple Remote Desktop, but the concepts, I'm told (I've not done this) still hold true:
How to Setup 300 Printers in Just Under 3 Minutes
http://www.acc.southernct.edu/files/SetPrintersInMacOSX.pdf

How to configure multiple domains in Active directory

HI,
How can I configure multiple domains on Active Directory. When I installed AD it asked for a domain name, there I gave ravigupta.com as domain name. But now I find no way of creating another domain.
I am a java developer and my task is to write a programme which returns all the domains available in LDAP server.
To start with ,I tried to create few domains in LDAP server ( AD ) but stuck up ,as i found there could exist only one domain.
Please tell me how to configure multiple domains in LDAP server ( Active Directory).
I skiped DNS configuration while AD installation.
-ravi

I'm sorry, but you should be asking on a different forum. This has nothing to do with Java.

How to setup the 'Client Licensing Mode' for Windows server?

Hello,
We will install the SBO server:
OS: Windows Server 2003 Standard Edition
SBO Clients: 150
How should we setup the 'Client Licesing Mode' for the windows server?
If we select the mode "Per server,Number of concurrent connections", how to set the connection number?
Thanks in advance.
Don

Hi..
you can set License to Particular user using License under Administration and Client will automatically fetch License using License Manager on License Server
Regards,
Bhavank

How to set up authentication against Active Directory using custom account

Hi All,
Our development BPC server (version 7.0.112, MSSQL Server 2005) was installed using a local user in domain X. It is a single-server installation (meaning all services were installed on that server). The dev server always has the latest data/users by restoring the production backup on the dev server. For testing purpose, I need to allow a user of domain X to log in and do a testing.
Is there a way to configure the dev server to authenticate against an Active Directory in domain X using a special user in the domain X? If yes, how can I configure the dev server?
Thanks.

The installation user must be a domain user with rights to browse domain X.
Otherwise you are not able to add users fom domain.
In your case installation was done with a local user which means you willnot be able to use domain users.
It can be an workaround if you will change the identity for 2 COM+ components to be a domain user instead to be that local user.
Any way I don't advice you to do this. It will be better to reinstall the dev using a domain user.
The COM+ which has to be changed are:
OsoftAdminServer
OsoftUserManage
Attention domain user used must be added into administartor group of BPC server and also to have sys admin right to SQL Server.
I hope this will help you.
Regards
Sorin Radulescu

How to search for data in active directory

if i have an administrator priviledge, how can i search for user's data if i know his username from active directory.

What form do you have the user's name in ?
ANTIPODES\alberteString searchFilter = "(&(objectClass=user)(samAccountName=alberte))";[email protected] searchFilter = "(&(objectClass=user)(userPrincipalName=[email protected]))";Albert EinsteinString searchFilter = (&(objectClass=user)(givenName=Albert)(sn=Einstein))";or using Ambiguous Name Resolution (anr)String searchFilter = "(&(objectClass=user)(anr=Albert Einstein))";or it's even clever enough to useString searchFilter = "(&(objectClass=user)(anr=Einstein Albert))";

How to setup Wireless Clients MAC+Active Directory based acess

Similar Messages

Maybe you are looking for