How to setup Workgroups named with numerals?

Hi all,
I took a few moments to kick off a "trial server" running 10.8 on a spare iMac in my school. I figure I'll test it out before wiping and upgrading the school's current server.
Traditionally, each year group of students is a workgroup is named by the year they begin at the school. I wanted to setup year groups, using the Server App, with numerals: 2013, 2012, 2011, etc. However I couldn't. A message would come up saying I couldn't use spaces or punctuation (but I only had numbers). I could create a group called "teachers" but no go with the year groups using numerals.
Any advice?
Dave.

Can't create a group which looks exactly like a number. Sorry. Instead, call them 'Year2011' or 'ClassOf2011' or something like that.
(The technical reason: Groups have both names and automatically generated numbers. Some commands for doing things to groups accept either the name or the number: if what you type starts with a digit they assume you're using the number, if it starts with a letter it assumes you're using the name. So it stops you using numbers as names because it would get that wrong.)

Similar Messages

How to setup the portal with the uniform style for SRM + Esourcing?

how to setup the portal with the uniform style for SRM + Esourcing? We will setup SRM 7 + esoourcing + portal, but as we know esourcing screen style is not same with SRM, so how to uniform the style between this 2 diffirent software? any body have idea?

Hi,
SAP E-Sourcing 6.0 is the solution. It is same look&feel.
Regards,
Masa

How to setup a group with autentication

Hi, Every body,
I am new in this forum, I found Stratus is a so exciting platform, now I need your help.
I want to setup a group with posting autentication, in the group, some one has the posting right, others have not. I found the "groupspecWithAuthentication, groupspecWithoutAuthentication, encodePostingAuthorization，setPostingPassword" etc. but I cant understand how to use them.
I have dived in this forum and the reference of Stratus 2.0 beta( here) for several days, and I have tried the samples posted by Mike, and I have study almost all threads in this forum, but I still cant find the clue.
Please help me out, thanks advanced,

Thank you, Mike, for your timely reply. Forgive me the delay, because now is our most important festival, I just back from a party.
Now I understand, but I still wonder,
1. if a group is in running, and a authorized user has joined. Now he misdoes, I want to withdraw the authentication, how can I? revise the password and recreate the group?
2. How can I setup a group, just authorized users can join? I know I can use secret group name, but if authorized user divulge the group name, others without autentication can join the group too. ( because the swf easy to reverse, hacker can sniff the opaque groupspec string, revise the swf, impersonate authorized user, etc).
3. How can I banishment a misdoer from my group?
Thanks again for your time.

How to setup Slingbox AV with Linksys E2500

I just purchased a new Linksys E2500 and I am unable to setup internet viewing with it. I have went in and done the port forwarding and still I have not had any success. I would appreciate any helpful information.

So the concern that you said is the configuration of the Router ( E2500 ) at home.. So could please inform us the name of the ISP( Internet Service Provider )... So it all depends upon the ISP( Internet Service Provider ) setup...
If you want to configure the router with the help of the CD so for that you need to unistall the existing Cisco Connect Software from the computer...
Reset the Router and power cycle the network...Make the following connectivity:
Modem ----> Router -----> Computer
They all should be connected with the Ethernet Cable... Then install the Cisco Connect Software... It will help you in configuring the Router...
As far as Slingbox is concern you did port forwarding but until and unless you are not online it would work....

How to setup remote access with E4200?

Hi,
I am new to this and I need help from you all on how to setup the E4200 so that I can access the media server when I am in office? Is there a guide or step by step procedure on this? I was browsing on the Cisco website and unable to find it.

The purpose of using DDNS is it substitutes the public/WAN ip address provided by your ISP.We all know that the ip address provided by our ISP(if we are not subscribe to a premium static ip address) is basically public and will always change from time to time.So it will be difficult for us to know what's the ip address our ISP has provided us and this will lead us problems accessing our router or ftp server remotely. Thus by using DDNS' it will now allow us to access the router remotely without knowing what's the WAN ip address.

How to setup wireless printing with AirPort Express?

Hey, I just bought a AirPort Express today and I can't figure out how to setup the usb wireless printing. Could someone explain in detail on how to do this? Thanks-Michael
I have a Windows 7 64-bit PC and a Hp Deskjet F380 USB printer.

Download the install Bonjour Print Services for Windows v2.0.2
Run the program. Hopefully, your printer will be recognized.
If it is, "install" the printer and try to print.
Keep in mind that if you have an All-in-One type of device, that only the print function will be supported.
Advanced features like copy, scan, maintenance, etc are not supported. You will need to connect the All-in-One directly to your PC if you need those services.

How to setup LAPAC1750-PRO with LAPAC1750 Workgroup Bridge Mode as WiFi Extender

I've got following devices:
1 LRT224 Dual WAN Gigabit VPN Router (Load Balancing)
2 LAPAC1750-PRO Access Points
6 LAPAC1750 Access Points
I'm supposed to make a Cluster between 2 LAPAC1750-PRO and then connect the 6 LAPAC1750 using Workgroup Bridge Mode, but after purchasing and while configuring, I found the strage thing that:
If I need to setup a Workgroup Bridge Mode, the clustering will not be available (so I need to modify the changes on either PRO APs whenever I need to perform some) and the Bridge Mode needs to be disable if Clustering is ON or vice versa.
Spoiler (Highlight to read)
+--- The Configuration ---+
I've made 2 subnets:
192.168.1.x (Existing)
192.168.10.x (New)
and configured 4 APs on each (1 PRO and 3 Normal using Trunking between 2 HP 1910 24 Switches) and then again found some strange thing that:
Only 1 Normal AP can be connected to PRO in a Workgroup Bridge Mode, and vice versa.
+--- The Configuration ---+I've made 2 subnets:192.168.1.x (Existing)192.168.10.x (New)and configured 4 APs on each (1 PRO and 3 Normal using Trunking between 2 HP 1910 24 Switches) and then again found some strange thing that: Only 1 Normal AP can be connected to PRO in a Workgroup Bridge Mode, and vice versa.
+--- The Problem ---+
--- Please correct me if I'm wrong
It supposed to extend the Wireless Range, therefore I need to do the following:
PRO AP needs to connect to the AP 1 of and the AP 1 then connects to AP 2 and so on in Workgroup Bridge Mode ...
OR
All the APs needs to connect to the PRO one by registering one by one in Workgroup Bridge Mode
Thanx in Advance

Thanx! The information is very helpful.

How to setup ODBC query with schema

I am trying to setup DIAdem to query a SQLserver database that was orginally created by Rockwell's Historian (a PLC database). This database is structured around a schema called "RSBizWare". To properly query the database, this schema name must be in the naming structure. I have been attemping to use some of the SQL examples posted in this forum but I cannot figure out how to include this schema field. Any help would ba appreciated.
Thanks

Hi RandallW,
You have two options, you can set up a Windows ODBC Administrator profile that successfully applies the required schema, then use the DIAdem ODBC functions, which all start with SQL_...(), or you can construct an ADO connection string which successfully applies the required schema, the use native Windows ADO objects in a VBScript to query the data base. If both are available, and you have DIAdem 10.1 or higher, I would recommend the ADO approach. I really don't know how to tell you to apply this schema in your connection to your data base. Do you have any other software that can connect to that data base? There may be information on connecting to that data base available on the web. Once you can connect to it, we can help you use that connection in DIAdem.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to setup a network with a time capsule, airport extreme and an airport express?

Hello.
First I want to make it clear all my knowledge off wireless networks is going on forums on the internet, before a couple of months ago I didn't realize wireless networking was so intricate so forgive my lack of experience.
I just bought a time capsule (today, 4th generation), I have an airport extreme bought in January 2011 (they just got refreshed so mine is now one generation old) and the same with my airport express (bought in January).
I originally bought the airport extreme and setup a wireless network using the dual band setup. I have no issues with the 5ghz network and most of my devices run on wireless n so I had no issues with them. my only two wireless devices that can not use the 5ghz network is my iPhone 4's which use wireless n but it has to use the 2.4ghz signal. Problem is in my apartment I am bombarded with other peoples 2.4ghz networks so my signal is terrible 10-15 feet from the airport extreme. Near my extreme I am getting signal ranges around 15mb to 20 mb. When Im about 15 minutes away in my bedroom (so one wall in between) my signal plummets to 1-2 mb. sometimes as low as 0.17mb which is not good. I got the airport express to extend my range and placed it in my bedroom. . After setting up the airport express the signal still was terrible. I researched and realized that if the signal strength ***** then the airport express cant boost the signal as much which makes sense in hind sight. I then researched setting up a roaming network or a WDS network. Per research a WDS network was not recommended b/c I was not using a wireless g network. I attempted to create a roaming network and then realized that you can not use an airport express in a roaming network. This has led me to now buy a time capsule.
First, in my setup do I or should I have the time capsule as the primary? I believe its more powerful than the airport extreme but Im not sure if that matters in a network that is distributing wifi from ethernet (thats how I am connected the extreme and the time capsule)
so can I do
cable modem ETHERNET Airport extreme(in the living room where its always been and works great in that immediate area) (3rd generation) ETHERNET Time Capsule(in the bedroom where I usually get poor signal) (4th gen) and then an airport express connecting to the 2.4ghz signal in the bedroom where the time capsule also is EXTENDING the wireless range?
or should it be the time capsule first bc its more powerful?
I tried setting up this setup and everything is green but I don't know if what I am doing is actually working on full cylinders b/c I am confused on some aspects. mainly on the airport extreme which is the primary device I have under the wireless tab selected create a wireless network and on the time capsule it also is on create a wireless network with the network name being exactly the same. Should it be changed to extend a wireless network? and then bridge mode? Should I have different channels for the different devices that are on 2.4ghz?
I am open to hear ANY suggestions, or ideas to improve my setup. PLEASE PLEASE HELP!!!!!!!, lol its been 5 long months of poor internet in my bedroom where my wife has her setup with a roku box and wifi tv (I have those hardwired for now) but mainly for her iPad and iPhone b/c its so bad sometimes she has to turn wifi off and use 3G. I have same issue in my bathroom, sometimes Im getting decent signal and sometimes its so bad I can't open the link on an RSS feed in safari which I have to assume doesn't require that much bandwith?
I have no wireless g devices. The only device I need 2.4ghz for is my iPhone 4's but they both use n also. All my other deivices connect on 5ghz and my 5ghz network is decent, a lot better than the 2.4ghz network atleast.

You wrote so much that I find it hard to address all your concerns. However, here are some thoughts:
1) I'd configure the Time Capsule as the "main" router, connected directly to your cable modem. Configure it to "create a wireless network" and to "Allow this network to be extended". Configure the other devices to "Extend a wireless network".
2) Put any device that's extending the network half way between the main router and the wireless clients. If the signal from the main router is weak at the cllient's location, then the extending device will also receive a weak signal.

How to setup SATA raid with the nvidia controller card

yea, how do you enter the setup to make an array with the nvidia controller on the K8 Neo 4 platnum edition?

Quote from: OptimusDinkus on 13-May-05, 07:49:14
yea, how do you enter the setup to make an array with the nvidia controller on the K8 Neo 4 platnum edition?
You need to enable it from bios first...
Then you will recieve a prompt during boot to hit f10 to configure it.

How to setup airport express with time machine

just bought airport express so i can extend my wifi range,can anybody help on how to set up! I have time machine 2gb, my house is wired with cat6 cable in all the bed rooms, but now only half my house get wifi,so i want to extend it.I know i have to go into air utility and change some stuff, but sure what stuff?

I assume that this is a new AirPort Express and you have not tried to configure it previously.
Locate the AirPort Express in the general area where you would like to have more wireless signal coverage.
Connect the Ethernet cable to the WAN "O" port on the back of the AirPort Express
Power up the AirPort Express and let it run a few minutes. The amber light will be blinking slowly at this point.
Click the AirPort icon at the top of your Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click directly on AirPort Express.
AirPort Setup will open up automatically on your Mac, take a minute to analyze the network, then announce that the AirPort Express will be configured to extend the Time Capsule network.
Enter a device name that you want to use for the AirPort Express and click Next
Wait a minute while AirPort Setup configures everything for you. When you see the indication of Setup Complete, click Done.
You should be all set.

How to setup job chain with time dependant steps

Hi
I need to setup the following job chain with next job step waiting until specified time before starting
Step 1 Job A Time 07:30 if complete go to job step 2
Step 2 Job B start time 09:00 if complete go to job step 3
Step 3 Job C start time 09:30 (end job)
Have tried to use a pre-condition in step 2 and 3 but that just caused thoes steps to be skipped.
can somebody point me in the right direction
Thanks in advance
Jon

Hi Anton/Babu
Thanks for your help, I managed to set this up by embedding multiple Job Chains with their own time window in a master job chain.
As we continue our roll out not sure how scalable the solution will be as you have to create multiple job chains for essentially the same job with the only difference being a specific time window.
I guess only time will tell.
Thanks for you help again guys
Jon

How to setup Business Group with Global Legislation?

Hi All,
We are exploring possibility of creating International Business Group with no Legislation Code for our client. The client has operations in multiple geographies.
I found following document in Metalink
How an International Business Group be created with no Legislation Code? [Doc ID 851711.1] It mentions "Global legislation must be installed in order to set up a Global Business Group. The business group is created just like any other, but with Global legislation selected. You will need to use Global responsibilities to access it."
When we tried to create a business group with Legislation Code as 'Global" we did not find any such Legislation Code in dropdown of *Business Group Info classification.
Has anybody implemented Global Legislation before? Any information on Setup Steps, Challenges faced, bugs and issues faced with other modules especially OTL would be appreciated.
Thanks in Advance,
Amit
Edited by: user10450466 on Jan 22, 2010 12:23 AM

I wasn't aware there's any such thing as 'Global Legislation' in HRMS and I think the Metalink Note you mention is misleading. There are multiple concepts here being mixed up.
hrglobal and Data Installer
Oracle deliver legislative seed data through hrglobal and Data Installer. When a DBA runs this they pick the legislations they wish to install. That includes legislations such as US, GB and all legislations where Oracle HRMS deliver seed data (Fast Formulas, balances, etc). One of the options here is 'Global', which ensures that common seed data used across multiple legislations is installed. This process does not create new legislations - it just creates the seed data used by those legislations. 'Global' is not a legislation - it just means that the relevant seed data (Fast Formula, balances, etc) is typically delivered without the legislation_code column being populated.
Business Groups and Legislations
A Business Group is intrinsically tied to a Legislation Code - they have a one-to-one relationship. When you define a Business Group you have to pick a Legislation and that list of Legislations comes from fnd_territories_vl. The list in fnd_territories_vl has nothing to do with hrglobal or Data Installer. There is no 'global' territory.
International HR & Payroll
If you are implementing HRMS in a country where Oracle HRMS do not deliver any specific legislative seed data or functionality (ie, the legislation isn't listed in Data Installer) you have the option of using International HR & Payroll. This allows you to install generic seed data into the legislation of your choice, which is again a list from fnd_territories_vl. Again, there's no concept of 'global' legislation. Information on that is available here:
International HR and Payroll [ID 261452.1]
International Implementations
Customers, like yours, who are rolling out Oracle HRMS to multiple countries have a big choice to make: single or multi Business Group. If you opt for one Business Group you create employees in multiple countries all within the same Business Group. That Business Group is tied to just one of those country's legislation codes - which you go for is up to you but that's generally the Legislation Code of the International HQ. The problem with this approach is that you can't leverage the legislative-specific functionality for each of the other countries.
If you opt for multi-Business Group you typically define one Business Group for each country so that you leverage the legislative-specific functionality for each country. This is generally more popular but doesn't suit everyone: you can have problems with employees transferring from one country to another, etc.
Global Structures
Oracle HRMS has forced you to tie a Business Group to a legislation code for many years. As mentioned above, this causes a number of problems. To mitigate those, Oracle have delivered a number of enhancements that help you model global businesses:
1. Global Organization Hierarchies
2. Global Security Profiles
3. Global Overseas Deployment functionality (nickname GOD/GOLD)
4. Cross Business Group profile option
5. etc
I hope that helps.

How to setup Cisco IOS with multi public IP's

I'd like to set up a little network environment. We have bought 2 different subnet from our ISP.
The WAN internet connection: xx.yy.81.61/26
WAN gateway: xx.yy.81.1
First subnet : xx.yy.81.80/30 (this has the same first 3 octet as the WAN, probably doesn't count, because it is a different subnet)
Second subnet : zz.uu.156.48/29
As you can see in the first diagram, the xx.yy.81.61/26 is assigned to the CISCO's outside(WAN) interface, the internet connection is alive, all hosts in LAN have internet connection. We want to assign some hosts with public IP address (for webserver sake). I'm not familiar with networking, so please forgive me if I make some silly questions. In brackets, I make the cisco router setup with the "Cisco Configuration Professional 2.8" PC program.
|
| ADSL or Optical cable (fiber link)
|
+-----+
| | modem
| |
+-----+
|
| WAN (xx.yy.81.61/26)
| Gateway(xx.yy.81.1)
|
+----------+
| |
| | CISCO 881 (router/firewall)
| | IOS 15.2(4)M6
| |
+----------+
|
|
-----+------------- our local LAN segment (vlan)
10.10.10.1/24
I want to set up the CISCO:
- The question is, that how can i make my subnets alive? I just want to transmit(NAT) some public IP from subnet to specific HOST computer(or inverse?). I have made the NAT rules (zz.uu.156.50 <- 10.10.10.xxx), but no result, the public IP is unreachable(no ping, no traceroute).
- Do I have to assign a second IP(virtual) address from subnets to the outside interface(WAN). If yes, than how? Or my ISP has to route the subnets to my WAN IP address(xx.yy.81.61) ?
The truth is that the original setup was different, as you can see in the second diagram. In this case the both subnet was alive. Now, I unmounted the ISP owned HP router and I attached the CISCO directly to the modem output(first diagram), because we had some DNS issues and I think it is unnecessary to be 2 router sequentially. Please indicate if i was wrong.
I mention, that by the original setup, I could access the HP router (only the login interface) from internet with the first IP of the subnets (xx.yy.81.81 from the first subnet and zz.uu.156.49 from the second subnet).
|
| ADSL or Optical cable (fiber link)
|
+-----+
| | modem
| |
+-----+
|
|
|
+-------+
| | blackbox, no acces
| | ISP owned HP router
| |
+-------+
|
| WAN (xx.yy.81.82/30) or WAN (zz.uu.156.50/29)
| Gateway(xx.yy.81.81) Gateway(zz.uu.156.49)
|
+----------+
| |
| | CISCO 881 (router/firewall)
| | IOS 15.2(4)M6
| |
+----------+
|
|
-----+------------- our local LAN segment
10.10.10.1/24
Thanks for any answer or suggestion!

Hey,
Proxy-ARP should take care of this!
As long as you assign the NAT rules into the IOS Router it should start replying to any ARP request to those IPs on different subnets.
Of course the ISP should forward this ARP requests to you!
So make sure Proxy-ARP is enabled in the WAN interface and you should be good to go (as long as the NAT rules are good).
Regards,
Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2-CCNP, JNCIS-SEC
For inmediate assistance hire us at http://i-networks.us

How to setup wired network with G4, MBP and PC

Sorry to ask a bit of a stupid question here, but I've never had to network machines together so I'm starting from a knowledge level close to zero.
Situation. Old G4 (733) and new (intel) Mac Book Pro in one room. New PC (Dell) in another room with a wired router connected to internet. PC is also connected to a laserprinter. Hard wire ethernet cable running between the rooms to connect either the G4 or the MBP to the internet. Both the G4 and the MBP have only one ethernet connection. MBP is wireless, as is the PC. The G4 is not.
First off, I'd like to network the MBP and the G4. I believe ethernet is the best way to do this, but if I do that, how would I then connect to the internet? Would I just have a second router in the Mac room with the 2 Mac's hooked up to it and the other end going back to the router that's connected to the internet? I'd rather stay hard-wired than go wireless if at all possible. I do most of my internet work through the MBP, but some must be done through the G4, ie software updates, as the G4 has a lot more programs on it.
Second question, how would I then network to the PC in the other room? It would be nice to move files, photographs for instance, between the Macs and the PC. I'd also like to access the lazerprinter which is in that room, connected to the PC.
Hoping this is a simple question with a simple answer.
Thanks!

Hi-
Welcome to Discussions!
What you are describing is all possible, but, I am going to assign you some reading. This way, you'll be able to deal with your own particular needs, like a Pro.
The following will get you up to speed on networks, and various hardware needed:
http://www.atpm.com/network/setup/index.html
http://compnetworking.about.com/od/homenetworking/HomeNetworking_Setting_Up_a_HomeNetwork.htm
http://www.apple.com/support/tiger/network/
Adding the PC into the network has some special considerations. the following sites have good info for setting up such a network:
http://www.mac-connect.com/
http://www.apple.com/business/mac_pc/tutorials.html
For my needs, I have a switched ethernet network. All computers are connected to the switch, as is the modem, by ethernet cable. This allows computer to computer networking using AppleTalk. With the same cabling and switch, the computers are all able to connect to the internet using DHCP, or, one at a time using PPPoE.
These are all Mac's, but, with some setting adjustments, a PC can also be placed in a similar network.
As well, adding a wireless connection for one computer is possible. This would require a wireless base station to be connected to the switch. The wireless capable computer would then be able to enter the network, and vice-versa. Of course, the settings for all the hardware and software are the key. The settings can have variables, depending on what is connected, and how the connections are made. Another variable is your router/modem, and your internet service providers policies on multiple connections.
Adding the printer depends on the capabilities of the printer. Often, it is only possible to share a printer through a computer. A network capable printer can be connected to the switch, directly, or to a wireless base station, and then shared by all on the network.
http://www.atpm.com/7.12/networking2.shtml
http://www.apple.com/support/tiger/network/
http://www.pcstats.com/articleview.cfm?articleID=1596
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

How to setup Workgroups named with numerals?

Similar Messages

Maybe you are looking for