How to setup Xcode 4.2 for indesign plugin development

Hi all,
i am trying to add an indesign project template to xcode 4.2. I read and try almost all and nothing is working for me. I was trying to go step by step as getting started pdf from adobe shows, but its targeted for xcode 3.x, so any luck here... I am not able to sucessfuly run even dollyxs from terminal, it just generate empty txt file. Could anyone tell me please or shows link how to add indesign template to xcode 4.2???
thanks in advice

Hi all,
so finally I have made all steps the right way. Everything is ok, but when Iam trying to build my sample, error:
  "DontDeadStrip()", referenced from:
      PlugIn::~PlugIn()in libPublicPlugIn.a(PlugIn.o)
      PlugIn::~PlugIn()in libPublicPlugIn.a(PlugIn.o)
ld: symbol(s) not found
collect2: ld returned 1 exit status
pop up. How it is possible, that this method is missing?? Could anyone suggest correction?
THX

Similar Messages

  • Guide for InDesign Plugin development

    Hi,
    I am new to Extension builder - plugin development. I have experience with actionscript.
    I would like to get guide, document, reference or instruction to learn InDesing Plugin development.
    Thanks In Advance
    Regards,
    Bharat

    To develop InDesign plug-ins you need to get the InDesign SDK. You can find instructions in Adobe's website on how to do this. This includes a lot of information including a "Getting Started" guide.
    Note: InDesign plug-in development has it's own forum. This forum is for CC Extension development, which is not described in the InDesign SDK.

  • Hi, Might I know that how to setup the printer setting at InDesign CS6 for the Lable print?

    Hi, Might I know that how to setup the printer setting at InDesign CS6 for the Lable print?

    Label printing isn't something you set up in the print dialog in ID. If your print driver has an n-up feature that might work, but in general you need to create pages of labels to fit your sheets in ID, then print. If you are talking about doing a merge of an address list, read about Data Merge in thehelp files.

  • How to setup a company code for material management

    Hi,
    While creating material in MM01, in sales org tab, when I gave plant XXXX, it is giving an error "Company code YYYY is not setup for material management".
    So can you help me , how to setup a company code for material management
    Help is appreciated
    thanks
    DIL

    Hello Sendil,
    You can maintain it with trns code OMSY or MMPI/MMPV.
    Hope this helps
    Regards
    Arif Mansuri

  • How to setup a global artwork for a TV Show

    Hi, I've a TV Show composed by 45 episodes where each one have his artwork but I don't know how to setup a global artwork for the TITLE of the TV Show while retaining the 45s artworks.
    ie. when watching the Tv Shows (library on iTunes) I would like to see the global artwork of the Tv Show that is different of the other 45s episodes contained.
    Bye, Roberto.

    Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
    Here is the specific page http://foundation.zurb.com/docs/components/grid.html
    The default values are
    Em-base : 16px
    Row width: 62.5em (62.5em x 16px = 1000px)
    Columns per row: 12
    These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
    In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

  • How to setup a release strategy for store generated purchase order

    Hi there,
    Does anybody know how to setup a release strategy for store/plant generated purchase order? I have a request from our client, but I never cross this before. Please help and let me know the step with every single detail.
    Greatly thank for your help.
    Kind Regards,
    2tea

    Please go thru the below Release Procedure and check whether you have maintained all the settings properly.
    PO RELEASE STRATEGY
    The release code is a two-character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
    Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
    e.g. If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
    CT04 - Create Characteristic e.g. NETVALUE
    Click Additional data Table name CEKKO Field name GNETW and press enter
    (for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
    In the Basic data (X refers to tick),
    X Mutliple values
    X Interval values
    In the Value data, in the Char. value column, type >10000 and press enter
    Save your data
    CL02 - Class
    Class - Create REL_PUR
    Class type - 032
    Click Create
    Description - Release Procedure for Purchase Order
    In the Same Classification section, click Check with error
    In the Char. (characteristic) tab, type NETVALUE to assign your characteristics to the class
    OMGS - Define Release Procedure for Purchase Order Type
    Release Group - New entries
    Rel.group Rel. Object Class Description
    02 REL_PUR Rel. Strategy for PO
    Release codes - New entries
    Grp Code
    02 01
    Release indicators
    Release indicators Release Description
    0 Blocked
    1 X Release
    Release Strategy
    Release group 02
    Rel.strategy 01
    Release codes 01
    Release status 01
    Classification Choose your check values
    OMGSCK - Check Release Strategies
    (make sure there are no error messages)
    Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
    Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
    In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
    The person with the release authorization have to use ME28 to release the Purchase Order.
    Regards,
    Ashok

  • How to setup a default direction for new divs in fluid grid layout in dreamweaver?

    Hi,
    how to setup a default direction for new divs in fluid grid layout in dreamweaver? I am an RTL interface user, I need my new divs to be inserted from right to left not Left to Right! could it be in dreamweaver?
    Thanks.

    This may get me into strife, but my experience is that you are better off finding another platform for your RWD.
    The framework that I tend to use is by Zub-Foundation http://foundation.zurb.com/.
    A commercial product that I have come to appreciate can be found here http://www.projectseven.com/products/tools/composer/index.htm. Please do not mention me if you happen to choose this product.

  • How to setup a default size for new divs in fluid grid layout in dreamweaver?

    Hi,
    how to setup a default size for a new divs in fluid grid layout in dreamweaver? I don't need the default size for new divs as a 100% width, I need them 13.69% as a one coulmn width only (7 coulmns fluid grids layout for desktop size 1000w).
    This problem I've faced when I intended to insert dozens of fluid grid divs in the layout.

    Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
    Here is the specific page http://foundation.zurb.com/docs/components/grid.html
    The default values are
    Em-base : 16px
    Row width: 62.5em (62.5em x 16px = 1000px)
    Columns per row: 12
    These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
    In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

  • How to setup the Airport Extreme for PSP?

    Can anyone tell me how to setup the Airport Extreme for PSP? I have been searching the Discussions but none of the posting seems to explain detail enough. A step by step guide would be very appreciated. Thanks.
    PowerBook G4   Mac OS X (10.4.3)  

    Sorry, I forgot to mention a few points:
    1) I don't have the Airport Extreme base station;
    2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
    3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
    So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

  • How to setup the airport extreme for window xp

    How to setup the airport extreme for window xp

    Sorry, I forgot to mention a few points:
    1) I don't have the Airport Extreme base station;
    2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
    3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
    So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

  • How to setup gmail push notification for my iphone 5?

    I'm using gmail. Prompt respond for mails is very urgent for me.
    How to setup gmail push notification for my iphone 5?

    I switched from a BB to an iPhone a few days ago and I knew I was going to miss the QWERTY keyboard but then I also discovered that my GMail doesn't 'push' to my iPhone. I was used to 'push' for all mail accounts on the BB. I also missed being able to personalize text, email, and phone tones for individuals.
    I tried the Gmail app for iOS and it does deliver Gmail to the iPhone app quickly but the text is tiny and when it is a web page it's almost impossible to read.
    So, I have worked out a kludge to get around these problems.
    I added my exisiting Gmail account to the iPhone.
    Hotmail does push to iOS 7 so I created a Outlook account (could be hotmail or Live) using the web browser.
    I added the hotmail account to the iPhone. I basically use this to give fast notification of important emails on my iPhone.
    On my macbook email client I created a rule that 'redirects' incoming mail to the hotmail account. The 'Redirect' is important since the email will show up in the hotmail account on the iPhone as coming from the original sender and you can then respond to the original sender from the iPhone, though the sender will see it as coming from the hotmail account.
    The other downside is that you will get a second copy of the email in the gmail inbox on the iPhone, probably 15 minutes later.
    If you don't want all of the mail being redirected you can create a 'redirect' group in the Address book and then adjust the rule in Apple mail to only redirect the mail to the hotmail account if the sender is in the redirect group. You can add and delete contacts from this group depending upon which ones you consider to be important. You will still get two copies of the email on the iPhone, one in the hotmail inbox and one in the gmail inbox.
    You can prevent this from happening temporarily by turning off, but not deleting, the gmail account on the iPhone. You could then edit the emails on the Apple email client before turning the gmail back on in the iPhone.
    And finally if you use the VIP feature in email on the iPhone you can create a list of VIP contacts and then assign a different notification sound for the VIP's. So in effect important contacts mail will be redirect to the iPhone for quick notification and very, very important contacts will have a different notification sound.
    I'm basically using the Hotmail account as a notification  tool and basically delete all the emails in it since the original copy will be in the gmail account.
    And best of all it's all free, except for the bandwidth.

  • How do I enable plug-ins for InDesign CS2 - files won't open

    How do I enable plug-ins for InDesign CS2 - files won't open.
    I own CS2.
    I shouldn't have to buy CS6 InDesign.
    How do I open CS 2 files and get the plug ins again.

    Asking the same question over and over will not change the answer.

  • How can setup the outgoing email for ipad2?

    How can setup the outgoing email for ipad2?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • How to give call to dll in indesign plugin

    Hello All ,
    I am developing one indesign plugin on Mac OS X 10.4.
    I want to give a call to one dll in pluging code.
    But the problem with mac os x according to my knowladge ,dll need to be build in same project where we are calling that dll.
    That is why I build a xyz.dylib in same project for indesign plugin as one of the target. and I am coping it in Indesignplugin package content that is with release mode build.but dll gets build in debug mode.On Mac OS X I am using dlopen and dlsym call . But I am not able to call a dll present in indesign plugin package content. Any idea How to call a dll in indesign plugin on Mac OS X.Should we need tyo build a xyz.dylib file in release mode ?
    Thanks,
    Pallavi.

    Seems to me I don't understand something, or text format plugin isn't quite well example. But, I got some code from sdk to create layer with automation like this:
    SPErr MakeLayer(void) {
    PIActionDescriptor descriptor = NULL;
    PIActionReference reference = NULL;
    PIActionDescriptor result = NULL;
    SPErr error = kSPNoError;
    error = sPSActionDescriptor->Make(&descriptor);
    if (error)
    goto returnError;
    // Move this to the top of the routine!
    error = sPSActionReference->Make(&reference);
    if (error)
    goto returnError;
    error = sPSActionReference->PutClass(reference, classLayer);
    if (error)
    goto returnError;
    error = sPSActionDescriptor->PutReference(descriptor, keyNull, reference);
    if (error)
    goto returnError;
    error = sPSActionControl->Play(&result, eventMake, descriptor,
    plugInDialogSilent);
    if (error)
    goto returnError;
    returnError:
    if (result != NULL) sPSActionDescriptor->Free(result);
    if (descriptor != NULL) sPSActionDescriptor->Free(descriptor);
    if (reference != NULL) sPSActionReference->Free(reference);
    return error;
    and wrote aeta resource:
    resource 'aete' (16000, "myFile" " dictionary", purgeable)
    1, 0, english, roman,
    vendorName,
    "description",
    plugInClassID,
    1,
    1,
    vendorName " myFormat",
    plugInAETEComment,
    plugInClassID,
    plugInEventID,
    NO_REPLY,
    IMAGE_DIRECT_PARAMETER,
    "create",
    keyMyCreate,
    typeMyCreate,
    "create type",
    flagsEnumeratedParameter
    typeMyCreate,
    "layer",
    createLayer,
    "make layer"
    And what now? Is any better examples?

  • How to setup a static IP for a wireless printer

    This problem has been ongoing for several versions of OS X and the last five printers I've had and I'm finally over messing with it.  For some reson, when using a wireless printer with OS X this is a repetetive problem, and I think if I configured the printer to a static IP address instead of using DHCP, it might work better.  At least once a week, if not more often, I'll print something and get the ubiquitous Dock error of "Printer is not connected".  The printer is still in Preferences, but if I delete it, then it doesn't show up as it should for selection.
    The only way to fix this is reboot, and then the printer shows up again in Preferences.  I select it and all is well again...until a few days pass and the same thing happens again.  Using an HP LaserJet P1102w, still a current model, but it doesn't matter which printer I use.  I also have an Epson Artisan 725 and the same thing happens with it about once a week.  Also, this happens from both my Mac and my wife's Mac, so it's not an issue with just my machine.
    I've searched for documentation on how to setup a static IP address for a wireless printer with the Airport Extreme, but all I find are tutorials on how to do it with an ethernet hard-wired printer.  Any help would be greatly appreciated.

    You could set up your router to do manual assignment of IP address instead of using DHCP, but that is a PITA, because then you'd have to manually set up IP for all your devices.
    If you have AirPOrt Extreme, you could do this:
    In your Apple TV, go to the Settings >> About and write down the MAC address of your ATV
    Start up the AiPort Admin Utility
    Go to Network tab
    click + in the DHCP reservations
    Choose an IP you want for your ATV & Enter the MAC address
    From now on, this IP address will be reserved to the MAC address and only your ATV will be able to get it, no other device will.
    It is not a static IP in a true sense, but behaves just like one.
    Works great for me...
    If you don't have a AP Extreme, I'm sure other routers will allow you do reservations too.

Maybe you are looking for