How to share a double sided greeting card

i created a double sided greeting card (5x7) portrait and selected email attachment under share tab. The result was two separate files. First file was the front of the card and second file was the inside of the card. Not resembling a card. Is there any way to share a card and have it resemble the actions of a real card. (ie: front of card shows first then by clicking next or open or ?? u see the inside of the card?)

The card templates are really designed for printing but you could try saving as a PDF file and then attching that to an email.

Similar Messages

Printing a Two sided greeting card

I am trying to design a two sided greeting card, but I do not seem to be able to find such a project as that in Photoshop. Print shop has a double sided greeting card where you desgin the fron and back and then go to the inside of the card. anybody have any suggestions.
thanks
tim

Go to File>new>blank file, and in the dialog enter the height & width of your paper stock, set resolution 240-300 px/in, and design the components for your card. You will have to place these, each on their own layer, so that they print out in the correct orientation and that the fold of the card is centered. This will require some experimentation until you get it just right. View>grid may help in the placement.
The various card printing programs, such as Print Shop, readily allow accurate two-sided printing. You can import your design from Elements to the appropriate page(s) of the template.
There are also available templates (free) from Avery. Half fold greeting card #3265, for example, is available in landscape and portrait orientation in Microsoft Word application:
http://www.avery.com/avery/en_us/Search/_/?dimsearch=false&N=0&Ntk=SoftwareAndTemplate&Ntx =mode+matchall&Nty=0&Nr=AND%28SITESCHANNELS%3AAvery.com%2COR%28ContentType%3AAVERY-SOFTWAR E%2CAND%28ContentType%3AAVERY-TEMPLATE%29%29%29&Ns=Rank%7C0&Ntt=3265&x=13&y=15
Red River Paper has templates for Elements, also free.:
http://www.redrivercatalog.com/cardshop/help/templates.htm

Illustrator CS3 - Double sided Business Card in two pages PDF

Hi,
How do you create a double sided business card in Illustrator CS3 and be able save on one PDF document with two pages? I know how to create a single sided business card (90 mm x 55 mm with 5mm bleed) and save in PDF without any problems. I'm now trying to create a two sided business card in the same illustrator file and be able to save as one PDF but with two pages.
I searched a bit and tried playing around with page titling but the result just isn’t working out (the size of the business card in the PDF is too small).
Any help would be really appreciated!

I downloaded CS5 trail and it resolved my issue. So much more easier to create a two sided business cards and save in PDF.

Designing a Double-Sided business card in InDesign

Hi All
I would like to design a double-sided business card using InDesign and I have just downloaded the app. I went to create a new document but there is no option for "US business card" size as it states in the tutorial. Is this because I am using the UK Cloud? If so, how do I get around this?
Please advise how I go about designing my card.
Many thanks
Sabrina

But this is what I mean.... the option isn't there.
This is what I can see:

How can i print double sided from my macbook? The option is not highlighted., how can i print double sided from my macbook? The option is not highlighted.

How can I print double sided from my MacBook? The option is not highlighted,
shazmina2

This function is related to the printer driver and the printer you use. If you do not give details, nobody can suggest a solution. Usually, the correct driver solves the issue.

How do you do double sided printing with eprinting with a hp officejet pro 8500a premium?

How do I do double sided printing with eprint? Why is there no option to change it online? I have
HP Officejet Pro 8500A Premium

Hi,
Automatic Two-Sided printing is not currently supported by the ePrint Service, as you may find any of the service capabilities and limitations listed below:
Duplexing (printing on both sides of the page) is not supported.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02641898&cc=us&dlc=en&lc=en&product=4083971&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to get the Double-sided print in SMARTFORM?

Hi Folks,
Can u explain me , how to get the Double-sided print ?
I create two pages : Page 1 and Page 2.
Page 1 contains Main Window and some text data in it.....
Page 2 contains a secondary window with some TERMS & CONDITIONs data.
Print Mode Settings:
Page 1 Print Mode : D
Page 2 Print Mode : Space
I maintained all the above in my Smartform ,
but i couldn't get my second page at all and Double-sided print also....
Is there any settings missing or any to be maintained ?
GIve me a Solution....

HI Surender,
Check this one
http://www.sdn.sap.com/irj/sdn/printing?rid=/library/uuid/90edfc78-dfc9-2b10-dcbe-d4612972ceb9&overridelayout=true
Regards
Ram

PIXMA MG6320 Double Sided Business Cards Not Printing Correctly

I just set up and used the PIXMA MG6320 for the first time. Prints regular prints fine but I tried to use inkjet double sided business cards and something when very wrong. The paper seems the same on both sides. The brand is Avery. Side one prints great but side two prints as if there is a plastic finish on the paper. I left the ink to dry over night and it never did. Also, the image is terrible when it does print. As if its on a slippy surface but the paper seems the same flat finsih on both sides. Its not about double sided printing becasue when I sent side 2 through first, it did the same thing.

First of all double sided printing set-up from Illustrator is something that is very specific to the printer you are using, so you'd need to refer to your printer's user documentation to review the correct settings. Having said that the steps you take are very similar for all printers.
Here are some steps that might be of help:
The easiest way to this is probably to place the front and back of the business cards on two separate artboards, for example Artboard 1 for the front of the cards and Artboard 2 for the back of the cards. Use the Artboards panel (Window > Artobards) add a second artboard of you've not yet got front and back on separate sheets.
In the File > Print dialog box, in the General section ensure that 'All' Artboards are selected or define the Artboards Range to print if you have more than two artboards in your Illustrator file.
You might also want to enable Trim Marks (Marks and Bleed section) so you can easily trim the cards after printing.
You can access your printer specific settings, such as duplex or double sided printing by clicking 'Setup...' at the bottom of the Print dialog box in Illustrator.
Mostly you'll find an option you can enable called 'Double Sided' or 'Two Sided'.
There will also be a second option for either Long Edge or Short Edge binding. For a portrait artboard you'd select Long-edge, for a landscape artboard you'd select Short Edge.
Once you've set the Setup specific to your printer click OK and you'll return to the Illustrator Print dialog box, from where you can now print.
You might need to tweak the position of your 'back' a little if your printer doesn't print perfectly registered.
Cari

I need a tutorial on printing double sided business cards through adobe illustrator

does anyone have any suggestions on where to find a tutorial on printing double sided business cards through adobe illustrator?

First of all double sided printing set-up from Illustrator is something that is very specific to the printer you are using, so you'd need to refer to your printer's user documentation to review the correct settings. Having said that the steps you take are very similar for all printers.
Here are some steps that might be of help:
The easiest way to this is probably to place the front and back of the business cards on two separate artboards, for example Artboard 1 for the front of the cards and Artboard 2 for the back of the cards. Use the Artboards panel (Window > Artobards) add a second artboard of you've not yet got front and back on separate sheets.
In the File > Print dialog box, in the General section ensure that 'All' Artboards are selected or define the Artboards Range to print if you have more than two artboards in your Illustrator file.
You might also want to enable Trim Marks (Marks and Bleed section) so you can easily trim the cards after printing.
You can access your printer specific settings, such as duplex or double sided printing by clicking 'Setup...' at the bottom of the Print dialog box in Illustrator.
Mostly you'll find an option you can enable called 'Double Sided' or 'Two Sided'.
There will also be a second option for either Long Edge or Short Edge binding. For a portrait artboard you'd select Long-edge, for a landscape artboard you'd select Short Edge.
Once you've set the Setup specific to your printer click OK and you'll return to the Illustrator Print dialog box, from where you can now print.
You might need to tweak the position of your 'back' a little if your printer doesn't print perfectly registered.
Cari

How do you make double sided copies?

i have laser jet pro cm 1415 fnw color mfp
how do i make double sided copies,? from double sided paper, and from one sided paper?

Hello,
Thanks for the post. With this model you do have the ability to manual duplex. I've attached a document below with the steps to walk through this process. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02244601&tmp_task=useCategory&cc=us&dlc=en&lang...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

How do I print double sided on my mac? (OSX)?

I used to have a windows PC with office 07 on it, and i still have the same canon ip1800. This is NOT a double side supported printer, but in office, it gave me the option to print half the document, and then turning the pages that my printer printed (without changing the order that the printer made) upside-down and printing on them again. This way i got double sided printing, but i want to know how to do this is Pages, Adobe acrobat pro or Preview in leopard. Thanks!
(PS, i'm printing multiple pages, now just one, so i cant just take flip it, and print page 2, etc. That will be very very painful!)

When you choose to print, choose 'Paper Handling' from the printer options menu.
Here are options for printing 'all pages', 'odd pages' or 'even pages', which should do what you want.

How can I get bi-fold greeting card to print?

I have Elements 9 and created a card in bi-fold format and cannot figure out how to get it to print in that format. I have a Dell V715W printer. Photoshop help is of no help. I am trying to figure out if I need to print add a blank page to the front and print two pages to one sheet (front and back) or something else. There don't seem to be many options when printing or edit options to the file/project/card within Elements 9. Help!!

Riley,
Finally got a reply of sorts from Tech. To sum it up, Adobe has a problem . . .
"We have verified this behavior. and we are checking with the engineering group whether this is considered a bug or not. When creating one of the folding greeting cards, these are templates designed to be printed by Shutterfly. Because of this, the layout is meant for their printers to work correctly. It is not optimized for local home printing.
. Meanwhile, you can either use the print service (shutterfly), use the workaround of using the .PSD files, or to create the greeting cards without using a shutterfly template.
As a work around, you can save the greeting card project as a .PSE file (by clicking the Done button and choosing to save). When you save a multi-page document in PSE, you get a .PSE project file and a folder with the same name. In that folder is a .PSD file for each page in the project. If the customer opens and prints these they will get the expected behavior of two pages (instead of three), but the front page will not automatically print on the lower half of the page, that will have to be adjusted either in the print dialog (recommended) or by manually increasing the canvas size in the Editor. Duplex printing is not supported by Photoshop Elements, so you will have to consult with your printer manufacturer for instructions on how to best perform this."
So, the home printing - at least using their templates - doesn't work properly in Elements 9.
Hope this helps.
Wills 001

How do I enable double sided printing on my iPad through the HP ePrint app?

HP Laser jet 1102w
I have Windows 7 64 bit and a original iPad.
I would like to save paper when I am printing from my iPad. Is there a setting to enable double-sided printing when printing from an iPad using the HP ePrint app?

Hi,
Printing a manual duplex printing is not supported by the HP ePrint app or AirPrint as well, it can only be done with printers who provide automatic two-sided printing.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do I print on a greeting card in landscape when I can't save custom paper size?

I have a J6450 running on XP SP3 with the latest drivers and patches installed. I have greeting card stock measuring 6.5 by 10.0 inches and a Microsoft Word document with a custom paper size matching the that stock prints in landscape mode. The printer error is "Paper Mistmatch. Paper size or type is incorrect." I have followed the suggestions on the HP support page, changing the Print, Properties, Features options to show "Other greeting card", but can't define a custom paper size to match the stock. The Save option is not available. What do I need to do to make this work?

Here is a link to a HP document for adjusting several settings that may help with your issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01824353&tmp_task=solveCategory&cc=us&dlc=en&la...
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.

I have a hp photosmart B110 and a macbook air how do i print double sided? i have gone into system preferences but there is no option to change the printer preferences to double sided and i have printed double sided before with my old dell laptop

I have a HP photosmart B110 and Macbook Air I need to print double sided but there doesn't seem to be any options on the system preferences to change to double sided, I was able to print double sided with my old laptop which was Dell and allowed me the option under printer preferences but there is no option for that either i use pages for my documents and download documents through my university andy help appreciated

My HP Officejet Pro 8600 plus has dual sided printing
HP 5550dn Lost double sided printing with Mavericks driver

How to share a double sided greeting card

Similar Messages

Maybe you are looking for