How to share files in a network and allow read-and-write to a specific computer only?

I have several computers in my network, and I want to share a folder and allow read-and-write from computer A to Computer B only, and omit computer C. How do I do that? Thanks.

Thanks for the suggestion. I like this approach as Java is more familiar to me than other languages.
Our DBA is out of touch today, so I could not grant the javauserpriv to my database user. I tried to run the script anyway in the chance that my user had the privs, and it seemed to have hung. I am now combing Oracle's site for more documentation so I can write some tests to see if I can get a basic Java object working. Under what heading would I find this?
ajt

Similar Messages

  • How to share files across my network from Belkin N

    I have a belkin N+ router that you cant plug a USB hard drive or a flash drive into to share the files across the network. It shows my router as a device on the network but gives me the same error message every time I try to acess them. How can I set this up from my Mac, what do I need to to do?

    I had the same problem. I was first getting an error on my PC about the library being created with a newer version of iTunes. I upgraded my PC to 8.1 and am now receiving the following error when trying to open up the shared library:
    "The iTunes application could not be opened. An unknown error occurred (13005)."

  • How to share files with windows xp

    how to share files with windows xp

    stephenfromdagenaham wrote:
    how to share files with windows xp
    If you mean just moving files between a Mac and a PC with XP on it, get a USB flash drive, format it FAT32 (they usually come that way) and copy the files to that drive.

  • How to share files from imac to macbook ?

    how to share files from imac to macbook ?
    ethernet ?
    firewire?
    airport?
    what is faster and easier to setup and how
    cheers
    olivier

    unless you're sharing very large files, speed will be more or less the same using any of the above connections.
    this support article may prove useful: Mac 101: File sharing.
    you can also use firewire Target Disk Mode.

  • How to share files with sony smart tv

    How do I share files on mac with my sont smart tv?

    stephenfromdagenaham wrote:
    how to share files with windows xp
    If you mean just moving files between a Mac and a PC with XP on it, get a USB flash drive, format it FAT32 (they usually come that way) and copy the files to that drive.

  • How to share a project with a non-Adobe user and present it to prospect customers?

    I Have to share my project with a person who will present it to prospect customers. I cannot ask this person to open an Adobe account. Is there a way for him to access my DPS folio and show it? Or can I export it in a way that allows to appreciate the interaction features built inside?
    Thanks!

    OK, got it. Thank you!
    2015-01-17 14:46 GMT+01:00 Bob Levine <[email protected]>:
        How to share a project with a non-Adobe user and present it to
    prospect customers?  created by Bob Levine
    <https://forums.adobe.com/people/BobLevine> in Digital Publishing Suite
    - View the full discussion
    <https://forums.adobe.com/message/7105349#7105349>

  • The file contains file info data which cannot be read and has been ignored

    We have been sending images out to contractors, and sometimes when they come back the files are having this error:
    the file contains file info data which cannot be read and has been ignored
    When I then try to Photoshop Script the file info it throws errors.  Does anyone know what causes this error to happen?
    Thank you

    ok, Thanks!, BUT here's the bigger issue:
    We use a lot of Photoshop Scripting, and the file info is how we direct all of our workflows.  when a file comes back with "the file contains file info data which cannot be read and has been ignored" error, the scripts are unable to read/write to any of the file info ever again.  So not only did we lose all the info already in the file, but we can't use the file at all after this.
    Additonally, we tried copying and pasting to new blank documents, but realized we needed all the paths, channels, and sampler points too.
    Is there anything anyone can think of to get around this probelm?  A setting, or a program to fix the metadata, etc?
    Thanks!!!

  • I uninstalled Adobe Air and Adobe Reader and now I cannot reinstall them on the Adobe web site. I go thru the steps on Adobe site and never get a popup to RUN any programs.

    I uninstalled Adobe Air and Adobe Reader and now I cannot reinstall them on the Adobe web site. I go thru the steps on Adobe site and never get a popup to RUN any programs.

    Then there is something seriously wrong with either your
    browser
    Windows
    Internet connection
    I have just downloaded that installer (on Windows 7, using Pale Moon), and the download completed within less than 10 seconds.  And I am some 10,000km away from the Adobe download servers.
    Can you try a different browser?
    Can you download anything to your computer, e.g. from Microsoft?

  • How can I get Macs and PCs to share files on same network?

    I have a 2009 iMac running Mavericks and a Macbook Pro retina also on Mavericks.   I also have a desktop running Windows 7 Pro and a laptop on Windows 8.1.   I have a cable modem (Comcast) with multiple ethernet jacks and a WIFI modem.   The Macs see each other on the network but the PCs don't always see each other and do not see the Macs.   Can someone run me thru the basics on networking so I can share files?    Thank you.  
    Mark

    Arthur,
    Thanks for the link.   It is a good starting point.   Part of my problem is that I do not understand file sharing protocols on the PC side.   The Mac sharing "just works."   I keep getting issues with permissions, or, on some days,  the PC just does not show up on my finder.   Let me take a look at the link and try some things and I will report back.  

  • How to share file between windows server host and hyper-v windows server ??

    Hi there
    I installed windows server 2012 r2 as my host windows and again installed windows swrver 2012 r2 on hyper-v in one system .
    now when I go to file explorer > netwrok there is no computer name to share file or folder between them 
    How can join both windows to netwrok place in file explorer to share file and folder 
    before I try windows 8 as my host and server 2012 r2 as hyper and when I went to file explorer > network there were to pc's there . first windows 8 and second win server 2012 
    but when both windows are server there isn't and network pc's in network location on file explorer 
    please help me how can I bring them both server to file explorer > netwrok 
    Thanks
    Regards :
    Raha
    whit the best regard : Raha

    Hi 
    thanks to you both
    but when we install windows server as host there is not our windows in the 
    Internet\Network and sharing center\ ....... and in the file explorer > network 
    I found it when I add server host in server manager in guest server and manage it as host server user and then share files and folders from computer management and then create a shortcut from the share folder to desktop 
    and the did same for guest ... add guest server in server manager in the host server and manage it as guest server user and then share it's files and folders from the computer management and create a shortcut of share folder to desktop 
    if host windows be a client windows so this is so easy because after we install hyper-v win-server and go to file explorer > network > so we able to see both windows and all files and folders there but if host windows be a win-server we can't see them
    in file explorer > network 
    thanks you both again 
    Best Regards :
    Raha
    whit the best regard : Raha

  • How do I access files on my network I have Windows and netgear stora

    I have a home network with Windows XP and Window 7 computers; and a Netgear Stora network hard drive. I want to be able to access files (photos, mostly) that are on the network from my iPad 2.
    How can I do this?

    First you have to share a folder or volume on the PC. How to do this depends on what operating system you have on the PC.
    Once you have that set up, open a Finder window and look in the Sidebar under Shared. You may see the PC there. If not, go to the Go menu and select Connect to Server, and enter smb:// followed by your PC's IP address. You should be able to connect to the files that way. See this Apple article for further information.
    Best of luck.

  • Adobe Creative Cloud - How To Share Files With Clients and Colleagues | Creative Suite Podcast: Designers | Adobe TV

    In this episode of the Adobe Creative Suite Podcast, Terry White shows how to share Photoshop, Illustrator and InDesign Files with clients and colleagues and all they'll need is a browser to comment and see your Photoshop Layers.
    http://adobe.ly/10ZjpE4

    Terry,
    I guess I miss something. How can I share a folder of photos? When I return from a shoot, I select 20 of the pictures and need to share them with my client to pick up the favorites. Am I supposed to copy and past an URL for each image separately?
    Sometimes I also work with a colleague, I need to share my favorites with him. Same issue.
    We have tried Adobe Cloud, and then went for Dropbox. There we can share a folder and he can put even his pictures in it as well. That's what I call collaboration. And it is free (unlike Adobe Cloud). If you have some word in Adobe, please tell them to either drop it and make a deal with services like Dropbox, or make it properly.
    Thanks.
    Vaclav

  • How do i share files through a network?

    i got the internet through a router but cannot share files why?

    On your Macs, open the Sharing preference pane and enable File Sharing. Now you should be able to see this Mac from other Macs. Repeat this for every Mac that you want to be visible on the network.

  • I recently set up multiple accounts and when I was trying to figure out how to share files I messed up something in my documents. Everytime I open a doc from the ADMIN account, a box pops up that says "The file is not in the correct format" how to fix?

    I recently set up multiple accounts on my imac, When I was trying to figure out how to share the documents I must have done something wrong. When logged into the Admin account, I open up any document and I get a message box that says, "The Document could not be opened. The file isn't in the correct format. The file might be corrupted, truncated, or in an unexpected format." What did I do and how do I fix it?

    Without knowing what you did it is impossible to give advice on how to correct it.
    If these were files you copied over from some other system then just Re-Copy them replacing the ones that are corrupted.
    Other then that I suggest you Wipe the drive and start over with a clean reinstall of the OS and programs. Then if you want to share files to All Accounts place those files in a folder in the ROOT of the drive.

  • How to share files between pc and mac via external hard drive

    how can i share my files(mp3,mp4,documents) from my harddisk with mac. i am a new mac user and i have a harddisk of NTFS format(as i was a pc user).I learned that mac supports FAT32 format and therefore i can't write data on my external hard drive.
    but, reading a section of OSX yosemite(under compatibility) it is said that now we can easily share files between pc and mac.
    So please suggest me easier way that how can i share files between macs and pc as my friends uses pc and in future i really want to share my data with them without any hustle and i dont wanna loose my data in future

    You can format the HDD to a common one like ExFAT or Fat32 but a reformat will delete all data off of the HDD.
    Your other option is to use a third party software such as Paragon or Tuxera that will allow you to write to a NFTS formatted HDD.
    Ciao.

Maybe you are looking for