How to share or combine logging from multiple projects?

I'm working on a documentary project now with over 300 hours of footage. It was shot to AVCHD media on SD cards and were copied over to a hard drive. Three different people have been logging the media in the Log and Transfer window. We each have our own project file that we're logging into since we are all using our own iMacs to do the work. Since storage space is an issue, we can't just pull down all the footage into ProRes. Ideally we'll just take our selects directly out of log and transfer. Once it comes time to edit, is it possible to combine the logging information into one project, or does the logging metadata only exist in the project it was created in?
I've tried several ways to combine the project files (XML, Batch list exports), but none seem to transfer the logged info from Log and Transfer (all the XML and Batch lists do is import the footage that has already been transcoded to ProRes.
thanks!

Toastmilk wrote:
the perfect solution would be if FCP treated clips logged in Log and Transfer the same as it treats them in Log and Capture... creating an offline version that can be batch captured later.
How about something close to perfect?
(You may to far along in your workflow for this, but...)
Transfer your clips to OfflineRT settings using just a card number and clip number (so, the fifth clip from first card that you shot would be named "001 005" - the naming needs to be very straightforward and easy to reproduce). This will get your clips into the project file where you can add markers and log notes as well as copy and paste between project files. And, the files will take up a modest amount of disk space (less than 2GB per hour).
Assemble your rough cuts.
When you're ready to work at ApplePro Res, use Media Manager to create an offline edit a your ProRes settings (be sure not to trim unused media - the clips must match in name and duration), retransfer your clips at Apple ProRes using the exact same naming convention (it can even be in a different project or on a different machine), reconnect to the offline project, and then finish your edit.
This is much more hands on than one might want, but it'll work.
-Warren

Similar Messages

How disable PDFEdit combines text from multiple Tj operators

HI
In http://help.adobe.com/livedocs/pdfl_sdk/9/PDFL_SDK9_HTMLHelp/API_References/Acrobat_API_Re ference/PDFEdit_Layer/PDEText.html mention that "PDFEdit combines text from multiple Tj operators into a single text run, when possible "
how I can disable this feature
I want disable this feature because I write a program that process (encrypt) and copy every element recursively , I used chain encryption algorithm that mean if one bit change or shift all result will be wrong
when I encrypt, for example count 323 run in one textelement but after encryption and when I want decrypt in same textelement I just get 322 run, I think this problem caused by PDFEdit combines text.
thanks for your help

Pdfedit can and often will write a completely different set of operators. It converts the operators to an object representation, then wites opererators for the objects. you cannot stop this, it is what it is supposed to do.

How to create a pdf file from multiple images ?

Dear All,
I want to create a SINGLE page pdf file from two or more page size images that are combined to make a single page pdf. Again, this question is on pdfs that are made out of several, atleast two color images and a black-and-white mask for one of them.
I have such pdf files from an unknown source (the producer is edited out) whereby there are three tiff images, obtained using the well known pdfimages extractor.
When I want to make a pdf out of tiff or png or other image formats, I right click and tell Adobe Acrobat to make a pdf.
However, I dont know how I can give a command to select say, three tif images and specify which is the mask for which and then join them in a way that I get the pdf from the composite of the two color images and a mask for one of them.
Please help me out.
I am a little familiar with the pdf structure skeleton and when necessary, fixed xref tables in one of my favorite editors. A few years ago, I also wrote a bunch of javascripts to make some annotations and needed some automation and used some itext type libraries. However, I need your help in this problem as I am now rusty and forgot some of what I studied to solve my earlier problems. This is a new problem for me. Gentle hints from you would be very nice to help me in this problem. Please specify if necessary what manual and pages to read. in the pdfspec.
Best Regards
Disabled Veteran [physically handicapped]

Hello Again.
On Fri, May 11, 2012 at 12:20 PM, lrosenth <[email protected]> wrote:
>
> Re: How to create a pdf file from multiple images ?
>
> created by lrosenth in PDF Language and Specifications - View the full
> discussion
> ________________________________
>
> No clue who Irving is…
>
I was hoping to have your first name so its easy for me to address you.
> I have no clue what OS platform, programming language, etc. you use so
> can’t really narrow things down.
I would gladly mention that I am working on windows platform, preferably XP.
I can also work on linux for free products that come with it.
> Also, as this is an Adobe forum, we only
> recommend Adobe products – so there may be other options that even my list
> wouldn’t include.
But adding other products, for the help of an adobe products user,
even if it outside adobe, shall add greater prestige to your company
and give impression of user-centeredness.
> If you read ISO 32000-1:2008 (aka the PDF standard), you will find the
> information about Images and Image Masks well described. I didn’t think I
> needed to repeat any of that information.
Well, just add the few pdf stanzas since you are proficient on it and
I am presently a little rusty as I mentioned. Just asking a little
extra yard, not even to go an extra mile.
> And, if you read that same document, you will see that there is NO SUCH
> THING as a “text only PDF”. All PDF documents are structured binary files.
Well, ascii format or uncompressed format that is human readable. I
know its a binary file, but human readable ascii version of it.
I hope you can give me some stanza and various other approaches
possible so I can select or combine things for myself. I see only a
miniscule number of posts claiming to have written masks in this forum
and then with no details.
Regards
Roger
Message was edited by: dying veteran
because the adobe posting system went crazy and truncated all except the first line ... dunno why

How to get the job logs from sm35 by using the queue id and session name?

hi all,
can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
FYI..
i want to read this job log and i want to send it to an email id.
-> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module job_close.
but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
thanks in advance,
koushik

Hi Bharath,
If you want to download it to the local file then you can follow the instructions in the below link.
How to download Batch Input Session Log?
Regards,
Sachin

How can I remove people tags from MULTIPLE images in Organizer 13?

How can I remove people tags from MULTIPLE images in Organizer 13? The strategy for removing keyword tags does not work. It appears that keyword tags and People tags are considered something completely different in 13. I highlight multiple images, right click, and under keyword tags it says there are no keyword tags. There does not appear to be an option for people or other tags. Can anyone help? It is going to take literally hundreds of hours for me to do this one photo one tag at a time. ??

Comp. 792 wrote:
Hi, my linked images all have dashed lines at the bottom of the images. I searched for an answer and someone said to add:
img a {text-decoration:none:}
to the end of my CSS,
That CSS is complete nonsense. The correct way to remove borders from around links is here: http://forums.adobe.com/thread/417110.
If you want to get rid of dotted lines, they are almost certainly caused by the outline property. However, outlines around links are there for a reason: it provides a visual "you are here" clue to people who navigate the web with the keyboard, either through preference or because of disability. You shouldn't remove the dotted outline without providing a different visual clue.

How to create a Sales order from multiple quotations?

Hi All,
Please tell me how to create one sales order from multiple quotations?
Regards,
Maddy

Hello Maddy,
To create the sales order from multiple quotation, you should put the value "F - Only at item level: Always with selection option" under Quotation determination in your sales transaction type.
It will give you a pop-up to choose your quotations item while creating the sales order.
Some per-requisites are there:
1. Copy control should be maintained between your quotation and sales order.
2. Quotation should be error free and should have the status "Released"
3. Sold to party and Organization should be same in both transaction.
For more information you can check the below link:
Processing Quotations - Sales Transactions - SAP Library
Best Regards,
Dinesh

How to create plant wise STO from multiple requisition through Me59N

How to create plant wise STO from multiple requisition through Me59N

Due to the different supply plants the system does not know which one
to use and therefore throws the error message.
The only workaround would be to create the PO's seperatly per PR item.
Hoep this helps you

How to view concurrent program LOG from custom FORMs

Hi,
How to view concurrent program LOG from custom FORMs?
Thanks
ESL

Hi Thanks for your response....
lets assume there are 2 buttons, first button to submit concurrent program and second button to view concurrent program output/log.
Actually im able to submit concurrent program from oracle custom form(6i) in ebusiness(11.5.0.2) i.e first button (WHEN-BUTTON_PRESSED buitin).
Rather user navigating to VIEW-> REQUEST, i would like to give option to user to view concurrent program output/log when user clicks on second button (WHEN-BUTTON_PRESSED buitin)
How can i achive this?
Thanks,
ESL

How to see work flow log from Work flow number & work item?

Hi SDN,
How to see work flow log from Work flow number & work item?
Please let me know if there is any transaction for this?
Or there is any table which gives the details of Work items & work flow numbers?
Regards,
Rahul
Edited by: Rahul Wagh on Nov 12, 2008 5:56 PM

Hi Rahul
Go to the Transaction SWI1,
Enter the workitem no and press F8.
Select the required entry and Press Shift+F8 (Log Button)
to view the workflow log.
Best Regards,
Deepa Kulkarni

How can i import the data from multiple sources into single rpd in obiee11g

how can i import the data from multiple sources into single rpd in obiee11g

Hi,
to import from multiple data sources, first configure ODBC connections for respective data sources. then you can import data from multiple data sources. When you import the data, a connection pool will create automatically.
tnx

How do I transfer a clip from one project to another?

How do I transfer a clip from one project to another?
[Title edited to remove personal information... Mod]
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]

Gene
Thanks for the reply.
For now assuming that you are using Premiere Elements 11, 12/12.1, or 13/13.1 on Windows 7, 8, or 8.1 64 bit....
I am not sure that Left and Right channel audio editing is the answer to your DVD echo issue, but the opportunities for audio channel editing in Premiere Elements would include (before burn to)
1. Audio Mixer - Balance.
2. fx Effects/Audio Effects
Please refer to https://helpx.adobe.com/premiere-elements/using/effects-reference.html#audio_effects
for explanations of the Audio Effects.....
Balance
Channel Volume
Left Fill, Right Fill
Invert
Swap Channels
And, there is the free audio editor, Audacity Audacity: Free Audio Editor and Recorder for channel editing.
Do you hear the echo before the burn to disc?
Is any of the Timeline video content from your cell phone? If so, did you have any issues with a variable frame rate when you were preparing the video in Edit area for burn to in Publish+Share?
What audio effects, if any, did you apply to the Timeline audio content prior to burn to?
Please consider.
ATR

How to change the file type from IMOVIE PROJECT to other types of file

how to change the file type from IMOVIE PROJECT to other types of file??
thank you very much for your help=]

I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed?

How can I move a photo from one project to another

How can I move a photo from one project to another without creating a duplicate so I have the same photo in two projects.
I seems to me in the past when I moved the photo from project 1 to project 2, I would get a number showing the # of photos being moved and you could drag and drop in the 2nd folder and the photos would disappear from project 1 and show up in project 2. is there a setting I am missing. Now when I drag and drop the photo no red # shows up and the photo stays in project 1 and also shows up in project 2 apparently creating a duplicate.
Any suggestion?

Now when I drag and drop the photo no red # shows up and the photo stays in project 1 and also shows up in project 2 apparently creating a duplicate.
The projects are the basic containers. Each image and all its versions are in exactly one project.
You can use an image in many albums, without duplicating it, also in many products like books, screensaver, slideshows. But the projects are the basic structure of the library and you cannot have the same image in two different project, without duplicating it by storing the same original image files twice. Use albums to organize your library thematically.
Sorry, I misread your question. Dragging an image file between projects should move the image and all its versions to the other project. Aperture should only duplicate the image, if you hold down the alt/options key while dragging and move the image otherwise.
Which Aperture version are you using? And which MacOS X version? Is your profile signature "MacBook Pro with Retina display, Mac OS 9.2.x, Aperture 3.5.1" still valid?
In Aperture 3.6 on MacOS X 10.10.1 dragging between projects is still working as expected:

How do i select a clip from one project and enter it into another?

how do I select a clip from one project and enter it in another?

This doesn't seem to relate to Adobe Reader. Please let us know the product you are using so we may redirect you or refer to the list of forums at http://forums.adobe.com/

How to import SQLite .db file from AIR project

hi friends..
how to import SQLite.db file from AIR project. and i want use this in my application.
after importing can i update and delete the recordS?

There's no import needed. You just open it using the AIR SQL APIs. If this database file was created outside AIR, it's not necessarily compatible, though. There are SQLite features and extensions that aren't supported in AIR.

How to share or combine logging from multiple projects?

Similar Messages

Maybe you are looking for