How to share same sequence?

Hi all experts:
I have a problem with flash which I have no idea how to call it properly, so couldn't find it from web. So here is my question...
Let's say I have 2 buttons at the beginning and 2 different endings, but same sequence in the middle, how can I click on button 1 > same middle > ending 1 ; as well as button 1 > same middle > ending 2. Surely I know I can do it by duplicating frames, however it seems not right if I have more buttons and more endings. So can anyone tell me how? Thanks a million!
From Cheeky

It looks like you need to decide how you want to decide between different paths... no one can do that for you. However you do it, at the junction where a decision is made you either set the value of a variable that will be tested sometime later in an if/else conditional or use the decision immediately to take a specific detour to an alternate path.

Similar Messages

Different iOS: phone 4 & Iphone 6 Plus how to share same music folder but all the rest of the phone information separated not merge

I have a iphone 4 (iSO7.1.2) & a iphone 6 plus (iSO 8.1) . 1. Can I use one Apple ID for 2 phones? 2. I want to share only same music but have different Contacts, Emails boxes, Apps, documents etc on each phones. How to make it possible? 3. What should I do the iCloud back-up is lapse. The email address is to the same location. How do i set 2 different iCloud back-up individually on each phone? I'm using Mac OS X. Appreciate, all help. Thank you ... both my iphones are pretty messy up now .....identity crises....one moment its saving back-up or sync to iSO 7.1.2 ... the next moment its iSO 8.1.....

iphone 4 & Iphone 6 Plus how to share same music folder but all the rest of the phone information separated not merge?
You already ask this question, why are you asking again.

HT1203 iTunes: How to share music between different accounts on a single computer - I tried to use the instructions to configure 2 different windows users sharing the same iTunes library. I could not get this to work per the instructions.

I tried to configure 2 windows users accounts using a single library per the instructions in HT1203. My iTunes library is on an external drive. I cannot get this to work. Any suggestions?

To give other users read-only access to your iTunes library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
If you want to give full read/write access to more than one user, see the support article linked below.
iTunes: How to share music between different accounts on a single computer
There is a way to share the library without moving it to a secondary volume. If you really need to do that, ask for instructions.

How to share administrator iPhoto library with other users on same iMac?

How to share administrator iPhoto library with other users on same iMac?

This is the part I'm referring to:
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
The library stays in the Pictures folder for this.

How to share folder with only one person one same Mac

Could someone please remind me how I share a folder with one person I share my Mac with but not the others (we all have different profiles on the same machine...)
Thanks,
Michael

EddyS45 wrote:
My wife & I use the same iMac with different user accounts. How do we share one iTunes account on that computer. I tried moving the iTunes folder in music on my user account to shared user
Then hold Option and launch iTunes.
Select Choose library... and select the iTunes folder in /Users/Shared/ folder.

How to share the same Database Connection when using several Task Flows ?

Hi All,
I’m using JDev 11.1.1.3.0.
I’m developing ADF Fusion Applications (ABC BC, ADF Faces…)
These applications are deployed on a Weblogic server.
Each application has only one Application Module.
All Application Modules have the same connection type defined: JDBC DataSource : jdbc/GCCDS
It is working fine.
I’ve also developed Task Flow Applications for small thinks that are reused in multiple main applications.
Each Task Flow Application has also one Application Module with the same connections type as main applications.
All these task flows are deployed to JAR file (ADF Library JAR File) and are reused on my main applications. (drag and drop from the Resource Palette to ADF Regions….).
There are some parameters passed to Task Flows, so that they can filter data depending on which main applications they are called from.
Everything is working perfectly.
All my main applications are using more and more task flows. Which is nice for the reusability etc…?
Only ONE PROBLEM: DATABASE CONNECTIONS.
Every Task Flows service made a database connection. So one user may have 10 database connections for the same adf page. And when there are 100 users that are working at the same time, it becomes a problem.
How to share the same database connections for the main applications and all task flows which are used in the main application?
Best Regards
Nicolas

Hi John,
When I open a ADF Library JAR file of one of my task flow. (gcc_tf_recentSites.jar)
I can see TF_RecentSitesService.xml and TF_RecentSitesServiceImpl.class in gcc_tf_recentSites.jar\mu\gcc\tf\recentSites\model\service folder
+ bc4j.xcfg in gcc_tf_recentSites.jar\mu\gcc\tf\recentSites\model\service\common folder.
bc4j.xcfg details are
+<?xml version = '1.0' encoding = 'UTF-8'?>+
+<BC4JConfig version="11.1" xmlns="http://xmlns.oracle.com/bc4j/configuration">+
+<AppModuleConfigBag ApplicationName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService">+
+<AppModuleConfig DeployPlatform="LOCAL" jbo.project="mu.gcc.tf.recentSites.model.TF_RecentSites_Model" name="TF_RecentSitesServiceLocal" ApplicationName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService">+
+<Security AppModuleJndiName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService"/>+
+<Custom JDBCDataSource="jdbc/GCCDS"/>+
+</AppModuleConfig>+
+<AppModuleConfig name="TF_RecentSitesServiceShared" ApplicationName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService" DeployPlatform="LOCAL" JDBCName="gccdev" jbo.project="mu.gcc.tf.recentSites.model.TF_RecentSites_Model">+
+<AM-Pooling jbo.ampool.maxpoolsize="1" jbo.ampool.isuseexclusive="false"/>+
+<Security AppModuleJndiName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService"/>+
+</AppModuleConfig>+
+</AppModuleConfigBag>+
+</BC4JConfig>+
So, it seems that the Application Module is packaged with the task flow....
Is it normal ?
Regards
Nicolas

How to share the same coherence cache in two EPN

hi,all:
I need to share the same coherence cache in two EPN. to put data into this coherence cache.
only whe EPN can been deploy ok, the other EPN deploy will get below exception.
Caused By: java.lang.IllegalStateException: Service "synergy-scheme-service" has been started by the factory with a different configuration descriptor
at com.tangosol.net.DefaultConfigurableCacheFactory.validateBackingMapManager(DefaultConfigurableCacheFactory.java:1246)
who can tell me why? or who can give me a example on how to share the same coherence cache in two EPN.
thanks a lots

Hi,
This is because the system detects that you are using different configuration for the cache of the same name(and the domain name). If you want, we can discuss it, my mail is [email protected]
Thanks
Junger

How to share the same session between JNLP Application and browser session

How to share the same session between JNLP Application and browser session using BasicService.showDocument(url) method? It appears whenever i launch any URL from within a JNLP application using BasicService.showDocument(url) , it creates new instance of browser and session even after i used cooke handlers to restore JSESSIONID and Ltpa token etc.
public static int showDocument(String urlToOpen)
BasicService obj = (BasicService) ServiceManager.lookup("javax.jnlp.BasicService");
obj.showDocument(urlToOpen);
}

Try using Reflection

HT5621 How do I keep one Apple ID on iPhone and iPad and change Apple ID on my daughters iPod and iPad that currently share same apple id

How do I change Apple ID on iPod 5 and iPad mini while keeping the same ID on iPad and iPhone. I only want to change ID on 2 devices. Currently they share same ID. Thanks

You can start a new Apple ID, just understand all purchases made under an Apple ID are forever associated with that ID and can't be switched to a new one.
The requirements of an Apple ID is that it be from a valid email account.
http://support.apple.com/kb/HT2204
Since many apps are free, they can be repurchased free with a new Apple ID.
If you purchased valuable apps under your ID, get a new one for your daughter. Or visa versa.
You can continue to keep them in one computer library which will allow you to sync them to all devices.
Updates will require the Apple ID and password from the purchasing Apple ID.
Changing Apple ID (new email address )
http://support.apple.com/kb/HT5621

How to share library on same mac with two users

please provide step by step instruction on how to share library for my two girls on the same computer. my older daughter already has itouch and library. Now for the holidays got younger one an itouch also and want to share the library.
i am a novice with computers...so please help

just in case you haven't already resolved this, see: http://support.apple.com/kb/HT1203
To share your music with other accounts on the computer
On Mac OS X
1. Quit iTunes.
2. Locate your iTunes Music Folder. It is stored by default in ~/Music/iTunes or ~/Documents/iTunes/.
These folders cannot be accessed by other accounts on the computer. In order for other users to be able to access your music, you must move it to a publicly accessible location.
The Public folder in your home directory (~/Public), or to another folder outside your home directory that other users have access to, such as /Users/Shared.
Tip: The tilde "~" refers to your home folder. For more information see Mac OS X: Using Your Home Directory.
3. Drag the iTunes Music Folder to a publicly accessible location.
Important: Do not move the iTunes folder, the iTunes 4 Music Library file or the iTunes Library.xml file.
4. Open iTunes.
5. From the iTunes menu, choose Preferences.
6. Click Advanced.
7. Click the Change button.
8. Navigate in the Change Music Folder Location dialog to the location of your iTunes Music folder.
9. Click Choose.
Repeat these steps for each account that is sharing music with other users.
Note: If multiple users of a computer are storing music in one folder, duplicate song files are generated when a user imports music from CD that has already been imported by another user.

How to make use of the results of one step at the other step in the same sequence

Hello
I am new to the Teststand.
I am using labview8.0 with teststand 3.1
Plz get me solution for the below
I am configuring the serial port resources like resource name, baud rate etc..,I made the initialization using setup task.I made serial port write and serial port read as independant vi's in labview and called them from teststand as steps.Now i need the same resource name appear in some other steps in the sequence .how can i get them using teststand commands instead of specfying them at each step.
Also how to pass values or results obtained from one step to some other step in the same sequence using teststand commands.
Also help me in parameter passing
Regards
Kiran

Hi Kiran,
I wrote some example code that demonstrates what you are trying to do. The sequence file relies on a local variable named visa_resource of type LabVIEWIOControl.
Regards,
Attachments:
test.zip ‏11 KB

I have a iphone4s and an ipod 4th gen, they both share same itunes acc, the ipod has its own email but when people try to FT it also rings on my phone, how do i stop it ringing both devices

i have a iphone4s and an ipod 4th gen, they both share same itunes acc, the ipod has its own email but when people try to FT it also rings on my phone, how do i stop it ringing both devices

That's because you're using the same Apple ID on both devices. On your phone: Settings>FaceTime>You Can Be Reached at>Remove your Apple ID.

Datalogging and Supervisory Control : how to share data among LabVIEW applications on the same network?

I'm new to DSC. Is there an example program or article about how to share data (live data and data saved after running a program) among LabVIEW (using DSC) that is very basic? I would like to share live data and test reult data (eg. excel) among computers on the same network (may be LAN). Does sharing data over a network by using DSC makes whole system (all computers) down when one computer is locked up?

Hi,
The easiest way to network DSC data is using "network tags". The way you do it is by simply configuring the server PC as you normally would do for a local application.
Then from a remote compute, which we can call a client computer you can go to Tag Configuration Editor and option "File >> Import Network Tags.."
In the window that opens up you can hit the browse buttom and navigate to your server computer, select the .scf file you want to have and hit the buttom import.
Save the "client .scf" file locally and now you have in the client the same configuration you have in the server and your data is networked, from there on is just a matter of manipulating the data.
I hope it helps
Andre Oliveira

HT4236 How do you keep photos in the same sequence on the iPhone that they are on the PC folder?

How do you keep photos in the same sequence in the iPhone as they are in the folder on the PC??

When I sync my photos they are listed alphabetically (by folder) and within the folders, listed alphabetically again by the name assigned to the photo. The only way I can think of to keep the order that you have in your computer would be to assign a letter as a prefix to each photo. If you have more than 26 photos in a folder, you can double the letters, etc. I think that will keep the photos in the order you want.

HT2513 how do I schedule daily events in the same sequence

How do I schedule daily events in the same sequence.

Hello LeatherneckDevilDog,
Thank you for the details of the issue you are experiencing with duplicate calendar entries. I recommend reviewing the following articles to resolve issues with iCal duplicates:
iCloud: Resolving duplicate calendars after setting up your calendar application for iCloud Calendar
http://support.apple.com/kb/TS4118
iCloud: Advanced Calendar and iCal troubleshooting
http://support.apple.com/kb/TS4337
Thank you for using Apple Support Communities.
Best,
Sheila M.

How to share same sequence?

Similar Messages

Maybe you are looking for