How to Sharing Laserjet 100 MFP M175a using router plzz

hello all
i just bought a new Laserjet 100 MFP M175a and its work using cable with a windows 7 "32 bit" laptop
laptop is connected with a wireless network using router
I want to share the printer but when i searched for it i didn't find it so what can i do to find it wirelessly through the router
PS : i tried to find it using three type of windows ( xp , 7,and 8) and nothing is found
its relly very importent to me .. can you help ... and thanks in advance

On the host PC, go to Start > Control Panel > Device & Printers. Right click the pirnter and choose Sharing. Enable sharing.
The host computer must be on and NOT sleeping in order for this to work.
If all that fails, this tool may help: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03286146&cc=us&dlc=en&lc=en
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

BLUETOOTH ADAPTER LASERJET PRO 100 MFP M175A

Hi,
Can anyone tell me the correct bluetooth adapter for a LaserJet Pro 100 MFP M175A?
I was just about to purchase the BT500 but realised it is not compatible with the model I have.
Thanks in advance.

Hi Orinoco,
Thank you for visiting the HP Support Forums! To get the best answer to your question please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Organizer 12 - how to zoom over 100%, compare images, use the Magic Trackpad?

English Version below.
Hallo zusammen. Ich bin von Apple Aperture auf PSE 12 gewechselt. Nun habe ich meine 11500 Fotos im Organizer und ein paar Startschwierigkeiten.
Ich habe in den Voreinstellungen angegeben, dass man Fotos auf über 100% skalieren darf. Das funktioniert aber nicht. Fotos werden immer nur im Fenster eingepasst, wenn der Zoomhebel ganz nach rechts steht.
Einzig in der Vollbildansicht kann man über 100% skalieren. Dies funktioniert aber auch, wenn ich die Voreinstellung dazu nicht gesetzt habe.
ie vergleiche ich mehrere Bilder? Im Handbuch steht beschrieben, dass man dazu aus dem Menü Ansicht -> Bilder Vergleichen wählen soll. Diesen Menüpunkt gibt es bei mir nicht.
Auch bei dem Druck auf F12 geschieht bei mir nichts. Kann ich die Tastenfunktionen irgendwo neu zuweisen?
Zu guter Letzt: kann ich die Zoom & Pinch Funktion des Magic Trackpads irgendwie einschalten? Das vermisse ich sehr. Da war Aperture sehr Bedienerfreundlich.
English Version
Hi there. I switched from Apple Aperture to PSE 12. Now I have my 11500 photos in the Organizer and a few teething problems.
I have specified in the preferences that you can resize photos to over 100%. This does not work. Photos are always fitted only in the window when the zoom lever is all the way to the right.
Only in the full-screen view you can scale over 100%. However, this also works if I have not set the setting in the preferences.
How do I compare multiple images? The manual describes to select from the View menu -> Compare images. This menu item does not exist for me. (German Version)
Also by pressing F12, nothing happens. Can I re-assign the button functions somewhere?
Last but not least: How can I use the zoom & pinch from the Magic Trackpad? I 'm missing that very much. Aperture was very user friendly with that.

Hello Barbara and thank you for your answer.
I've ment side by side view. And it works by pressing F12 + cmd. Thanks.
Zoom & Pinch only works in the Editor, but not very well or smooth. And I couldn't tell you how often the Editior rotate my images unwanted ...
In the preferences of the Organizer, there is no point for a scroll wheel. And I'm really not able to zoom in the organizer over the "fitts in screen" size.
And I've found some more problems Sometime I'd like to export my images without any Exif/Metadata Information and resized. I haven't found any point do do so.
At the Moment, I'm thinking about switching back to Aperture, where I came from - I've tried to use PSE 'cause of Adobes Raw Converter, which is much much better with Olympus RAW Files than Apertures.

LASERJET 100 MFP M175MW scanning legal size document problem

I am on a Macbook Pro, running OS X 10.8.5. I am also using the HP Scan software 4.0.
I am having problems scanning a Legal Size document. It always cuts off the bottom portion, acting like it was only us letter size.
After loading a document onto my scanner/printer:
I open the HP Scan software,
Select the Scan Button
Change the Crop to US Legal in the dropdown area.
Continue
Then when I look at the image scanned in, it is not complete.
Is there something else I need to do to make this work, maybe a setting on the actual scanner/printer.
I have tried to read all support documentation possible and I cannot get this to work. I even updated all my operating systems upgrades, but I am not running Maverick yet.
I would be thankful for any help at all.
Thanks!

@MAMAC4
To my knowledge the only way you can scan legal is from the ADF, have you tried that? If you are trying to scan legal sizs docs from the flatbed than you will experience the cut off that you are stating in your post.
Please try to re-scan the document using your ADF feeder and see if this will solve your issue.
Thank you.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

HP Laserjet 100 MFP 175nw, Printer loses connection and have to reboot to print

This is super annoying.
Had this printer for a few months and it worked great. Changed my wireless password a couple weeks ago and now the dang thing has to be rebooted almost everytime it needs to print.
Today I did a fresh install on my iMac for it and after a couple hours it went right back to being unavailable. Help... before I smash it!
To note: I downloaded the driver install pkg fresh today from HPs site and used that for installation so the firmware can't be out of date.

So you changed the password on your router and when you need to print you have to reboot the router. What is the status of the printer when this occurs? Does the printer have a valid IP address at the time? Does the router see the printers IP address?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HOW TO CONVERT EIGRP TO OSPF WITHOUT USING ROUTE REDISTRIBUTION?

Please help me on that...

try like this.
data : year(4),
mon(2),
day(2).
in itab declare field cbudat(8) type c.
loop at itab.
year = itab-budat(4).
mon = itab-budat+4(2).
day = itab-budat+6(2).
concatenate year mon day into itab-cbudat.
modify itab.
endloop.
now use select for all entries and check gdatu = itab-cbudat.
regards
shiba dutta

HP LasetJet 100 colour MFP M175a to work wirelessly

I have an LaserJet 100 color MFP M175a
It does not work wirelessly
I have downloaded all the specific soltware and drivers available
I have a Mac with 10.8.5 installed and have no problem printing with a cable
The problem is the menu I have does not have the wireless option
I have downloaded the software thats available
still no sucess

Hi Fed_up123,
Welcome to the HP Support Forums. I see that you are trying to connect your Laserjet 100 MFP M175a printer to your wireless network.
The Laserjet Pro 100 Color MFP 175a does not support wireless connectivity, it only supports USB connectivity. The Laserjet Pro 100 Color MFP 175nw is the model of that printer that supports wireless connectivity. For reference I have included the Printer Specifications.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

LaserJet 100 Color MFP M175nw with Windows 8.1

I have a LaserJet 100 MFP M175nw and I am currently using it with a PC that has Windows 8.1. Recently upgraded to 8.1. I bought the PC with Windows 8 and the scanner/printer worked great with that OS. So I have been having issues with the printing/scanner ever since the upgrade.
I have it set up to print and scan wirelessly. It would work intermittently and when it didn't, I would remove the drivers and re-install them. Now that no longer works. I can't even get it to work using a USB cable. I downloaded the latest version of the drivers both the full featured and the basic versions, tried them both to no avail. It goes through the install then it gets to 99% and takes a long time then I get a message with a red X that states,"Error," And the error message that goes along with it is that it timed out. Same with both USB or wireless installs. I read through some of the difficulties others' have been having and the last I saw was to uninstall and then re-install the driver. That has not worked for me. I also downloaded the Print and Scan doctor but no device was listed which does make sense since I have not been able to get through an installation.
I ran and printed wireless network test report on the printer and it mentioned that the printer couldn't find my wireless router. But I have internet access with all other computers in the house with no issues. I don't know how to tell my printer what SSID to search for and the password for my network. The install files included a utility to do that but did not help.
I am stuck and would welcome any suggestion(s).
Thank you,
Frank

Hi @jacobumoru,
I see that you are getting a "fatal error" during the installation. I will certainly do my best to help you.
I have provided some steps that should allow you to continue the installation without the error again.
Run the installation, immediately after connecting the USB cable, follow the steps in this document to update the drivers so it doesn't error out again. A Fatal Error Displays During Software Installation. Then the installation should continue. Temporarily turn off any Antivirus Software, just to make sure it doesn't interfere with the install.
I have provided a document for Windows 8, for How do I get into Windows Device Manager?
If you need further assistance, just let me know.
Have a great weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro MFP M127fn Scanning Issue

Purchased a HP LaserJet Pro MFP M127fn Using Easy Dental Software with this unit. Easy Dental will list unit in it's drop down box but will not open a box for scanning. Easy Dental says I need a WIA driver? The unit WILL scan on it's own outside of Easy Dental Software

Hi @jaimelalone ,
I see that you are having issues getting the printer setup on the network. I would be happy to help you.
Usually the standard length for a Ethernet cable is 100 ', with a direct connection from the printer to the router, depending on the quality of the cable.
Here is a document for A 'Network Product(s) Not Found' Error Displays for the HP Color LaserJet Pro MFP M176n Printers and...
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to configure network printer with Linksys WRT54GL router network

I just bought a Linksys WRT54GL router and I am planning to build the following home-network around it:
1. A desktop computer connected to router via ethernet cable (hard-wired).
2. An HP Network Printer (Color LaserJet CM1312 MFP) connected to router via ethernet cable (hard-wired).
3. A notebook connected to router via Wi-Fi.
I want both computers (desktop and notebook) to be able to share files, and also to share the same network printer.
a. How do I do this?
b. Do I need to install the printer drivers in both computers as if the printer was local for each one?
c. What settings do I need to include in the Linksys router settings (and also the printer settings) to allow all this? I've read on the internet about DHCP configs, IP address, etc. but I hardly understand anything.
A step-by-step ("for dummies") explanation will be extremely appreciated.

You will need to install the printer driver on each computer that will be using the printer. You will need to have a printer driver that is designed to be used on a network. Many of HP's drivers (but not all of them) can be used for either a USB or a network connection.
Usually, when you use HP's printer installation software, it will walk you through the printer installation procedure, and install the printer drivers. This software is normally located on a CD that came with the printer. Some installation software demands that you setup a USB connection first, then switch to a network connection. Other installation software might install a network connection directly. Just follow the HP directions.
There are no special settings in the router. Simply wire (using an ethernet cable) your printer to a LAN port on the router, when the installation software (or instructions) tells you to do so.
Your printer will likely get a different LAN IP address (192.168.1.x ) from time to time. Some printer drivers can handle this and still work properly. Other printer drivers get confused, and cannot find your printer when it changes addresses. If your driver has this problem, then you will need to assign your printer a fixed LAN IP address. This will force the printer to have the same LAN IP address each time you boot up your network. If you need to do this, you will need to enter the LAN IP address directly into your printer (Sometimes this is done using the printer's buttons and display panel, and sometimes this is done using HP printer software). Note that any fixed LAN IP address must be outside your DHCP server range (defaults are 192.168.1.100 thru 192.168.1.149 ) , and it cannot end in 0, 1, or 255. If you need to use a fixed LAN IP address, I would suggest you use 192.168.1.13 , which should be easy to remember by looking at the model number of your printer. If you need to use a fixed LAN IP address, you will also need to enter the Subnet Mask 255.255.255.0, Default Gateway 192.168.1.1 , and DNS Server 192.168.1.1 , into your printer. If you use a fixed LAN IP address in the printer, you do not need to change any settings in the router. The router will automatically find your printer when you turn your printer on. Even if your printer is using a fixed LAN IP address, your computers can continue to get their address automatically from the router's DHCP server.

PRINTING IN COOL DOWN MODE PROBLEM IN HP LASERJET PRO 100 COLOR MFP M175a

i recently bought HP Laserjet pro 100 color MFP M175a but it prints like 40 pages and goes to cool down mode and it takes like 10 minutes to cool and again it prints 40 pages so i donot the problem

Hi @teko2014,
I see by your post that the printer keeps going into a Cool-Down mode. I can help you with this. I can help you with this.
I have provided a document with Resolving Control Panel Messages.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Update the printer's firmware. HP LaserJet Pro 100 color MFP M175a Drivers.
Select your operating system, click next, click the link for firmware.
Where is the printer located? (enclosed cabinet, desk)
If the printer is in a enclosed area, temporarily move it to another open location and try printing again.
What is the paper's weight and what kind of paper are you using?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected? (USB/Ethernet/Wireless)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Manual duplex printing doesn't work for LaserJet 100 color MFP M175a

Hi !
OS Windows 8.1. Printer LaserJet 100 color MFP M175a. Driver version 61.108.8.10073 date 2011 Apr 13th
1. After switching on checkbox "Print on Both Sides (Manually)" on "Finishing" tab of Print Properties Dialog and
start printing, dialog with instruction how to turn paper appears. Then printer must print odd pages, stop for
turning paper and then continue printing of even pages on the back side of paper sheets. But my device prints
all pages sequentually in order 1,2,3,... without any breaks. What is it- my mistake or possible bug in driver ?
2. Windows API function DeviceCapabilities with fwCapability=DC_DUPLEX for this printer returns 0 (duplex printing
impossible). This value for any other HP printer, even without automatic duplexer, always equel to 1.
This question was solved.
View Solution.

Hi @Up205,
I see by your post that you are having issues manually printing two-sided. I can help you with this.
The software for this model on Windows 8.1 is the Basic Solution Software and Driver. This basic software solution provides print and scan functionality only. Did you download and install the newest drivers?
HP LaserJet Pro 100 color MFP M175nw Drivers.
Check to make sure Bidirectional Support is Enabled.
Go to the start up screen, (tiles menu) type in "Devices and Printers", select settings, click on Devices and Printers, right click on the printer, left click Printer Properties, on the Ports tab, put a check beside Enable Bidirectional Support.
You might have to restart the computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 100 Color MFP M175a and airport express

Hi,
I just bought an HP LaserJet Pro 100 Color MFP M175a and installed it via USB cable on my mac book pro. Then I connected the cable to my Airport Express (where I had before a Samsung printer working correctly) and now it is impossible to find my printer via the airport express. I tried to add it via the printers & scanners (+) but it does not appear in the list.
Then I tried to add it via IP address but the 175a model has no IP address, which means I can put the address of the airport express but it does not communicate with the printer then...
I really tried several options without success and would be really grateful if someone has an idea or a solution.
Thanks in advance for your help!
Chris

Hi,
Thanks for the link that is really useful. However when we follow this process, the printer is not recognized as a printer but as a scanner, which means that everytime we want to print with it, it is not possible because the scanner is not proposed as a device to print.
On the following link http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Laserjet-100-color-MFP-M175a-Mbook-Air-lion-o... we are trying to solve this problem with Provost but it seems to be more complicated than expected. So please feel free to tackle this problem with us .

LaserJet 100 color MFP M175nw - how do I install a different driver on the server to which I RDP?

I have installed my LaserJet 100 color MFP M175nw on my (32-bit) Windows XP Pro SP3 PC via USB and it works fine. When I make it the default printer (I also have another HP printer installed locally) and use Windows Remote Desktop (RDP) to my server - which is (64-bit) Windows Enterprise without Hyper-V SP2 (2008 R2) it prints but some fonts show gobbledygook. The printer driver on the server is defaulting to "terminal services easy print". I have administrator privileges on the server and have, in the past, been able to download the appropriate driver to the server so that printing in the RDP session works. But now I only seem to be able to find installation software to download (not the actual drivers). So, when attempting to install the software (rather than copy it) on the server the installation waits for the local (USB) connection and won't proceed.
What is the best practices way to have the locally installed (fully functional) machine be able to print from an RDP session? I'm sure I shouldn't have to drag each new local printer to the server and install it locally with a USB cable.

Hi there IT _Mgr
Quick suggestion; This is a commercial product. I will suggest seraching for posible solutions and posting in the forum for HP Business Support for yet a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Hope you find the help you need there;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Hp laserjet 100 color mfp m175a

I am having Hp laserjet 100 color MFP M175a when iam giving printer print is getting black paper

Hi,
Check for genuine or refilled toner cartridges.
Check the power condition, make sure that the printer is connected directly to a wall outlet. And not power surge.
Try connecting the printer to a different location.
Hope this Helps
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

How to Sharing Laserjet 100 MFP M175a using router plzz

Similar Messages

Maybe you are looking for