How to shift text within an envelope template

Hello,
I have created an envelope template to mail out some thank you notes. The envelope size is smaller than the average business envelope (3.75 x 5" vs. the standard business). Naturally, I went in to page setup and created a custom size for this template. I ran into trouble when I saw that the recipient's name and address blocks are too far shifted to the right. They run off the page and forces many other pages to be created as a result.
How can I shift the text back to the left? I, like many other smart users, have shifted to the iwork suite recently and I am having a little trouble assimilating. I tried to highlight the text and click the downward triangle, but the triangle will only shift right, and not left.
I skimmed through other posts and couldn't find anything similar to my situation. Thank you for your help.

Yes, I actually haven't thought of that yet. However, I'm attempting to merge my contacts within address book.
I feel like it shouldn't take any drastic change in my document. I guess if all else fails, I'll resort to looking for that merge widget.

Similar Messages

Does anyone know how to highlight text within a mac mail message?

Does anyone know how to highlight text within a mac mail message?

I can't find that option in Mac Mail's editor. You can use a more feature rich editor like OpenOffice or Pages to create your message. Then copy/paste into mail.
Dan

How to align text within an EditText?

Hello,
using this simple one as an example:
var w = new Window('dialog');
w.preferredSize = [200,100];
w.et = w.add('edittext', void 0, "Some text");
w.et.preferredSize.height = 40;
w.show();
The "Some text" is placed top-left in the EditText - is it possible to control its alignment, i.e. ['center', 'middle']?
(just to be clear, I'm not interested in the EditText position within the Window, but just the text within the EditText itself).
Thank you!
Davide Barranca
www.davidebarranca.com

Davide, use the below example with either left, center, or right. You have to have the justify line right after the line that creates the edittext box:
#target photoshop
var dlg = new Window('dialog','test')
dlg.txt = dlg.add('edittext',undefined,'this it the text');
dlg.txt.justify = 'center'
dlg.txt.size = [200,60]
dlg.show()

How to center text within image

If you go to http://www.terwax.com/bf2.html , youll see text in the left side. It took me enough time to center the image. Now that i created ap tag within div, i was able to put text but in every browser its different. Below is the code. Please help me find easy way that can center the text within image.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Terwax - Battlefield</title>
<style type="text/css">
body {
     background-color: #333;
     height:inherit;
     width:inherit;
     margin-left: auto;
     margin-right: auto;
     text-align: center;
#apDiv1 {
     position:absolute;
     width:753px;
     height:110px;
     z-index:1;
     left: 286px;
     top: 174px;
     overflow: visible;
     text-justify: auto;
</style>
</head>
<body>
<div>
    <img src="images/import.png" alt="back" width="1288" height="992" align="middle" />
    <div id="apDiv1">Thanks for coming to the site. I am currently working on it. This isn't finished yet and a lot of graphics to come! Keep checking back and if you don't like or like something, make sure to hit me an email at [email protected] .</div>
</div>
<p> </p>
</body>
</html>

Terwax.com wrote:
That code didn't fix the problem
It just moved the text right to the bottom of page. Last time i did this, the text was static. It couldn't be highlighted.
I know there are tutorials, but i just need help with this as i can finish the website. I am doing all the tutorials currently (lynda.com), but its a long way from now and will be happy if someone can help me get the text in the grey box rather than falling out of it.
Try the code below in IE9. It should work if the browser is backwards compliant. I'll be amzed if it doesn't. Unfortunately I don't have IE9 available to test in. Didn't even know it was available. Is it a beta version of the browser which maybe hasn't been fully tested yet?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Terwax - Battlefield</title>
<style type="text/css">
body {
    background-color: #333;
#imageWrapper {
position: relative;
width: 1288px;
margin: 0 auto;
#apDiv1 {
    position:absolute;
    width:753px;
    left: 270px;
    top: 174px;
</style>
</head>
<body>
<div id="imageWrapper">
    <img src="images/import.png" alt="back" width="1288" height="992" align="middle" />
    <div id="apDiv1">Thanks for coming to the site. I am currently working on it. This isn't finished yet and a lot of graphics to come! Keep checking back and if you don't like or like something, make sure to hit me an email at [email protected] .</div>
</div>
</body>
</html>

How do I rotate text within a table Pages 4.3?

Does anyone know how to rotate text within a cell in a Pages 4.3 table?

You would have to use a floating text box over the cell. Make sure text wrap is turned off.

I'm trying to type wedding invitation envelopes which are 5x7 and I don't know how to create the format. In the pages area, the available templates are all standard envelope sizes. How do I create the 5x7 format template

I'm trying to print 5X& envelopes. In pages, the templates are all standard sized. How do I create a 5x7 envelope template so I can merge my addresses?

I presume you are using the Pages application, is that correct?
So start off by launching Pages and choose one of the regular envelope styles. Traditional works well for me.
Next go to the File menu and select Page setup. From the menu that says Paper Size select Manage Custom Sizes. In the resulting dialog, there should be a button on the left labeled "+". Click it. In the Paper Size area, select Width 5 in and Height 7 in. Name the size (where it says "untitled" something descriptive like "5 x 7 envelope". Click the OK button. The Paper Size menu here should now say the description you gave it. Click OK again. Your work area should now be a 5 x 7 envelope.
Best of luck.
PS If you are using Word or some other program, the process is probably the same or very similar.

How to change text in banners

How to change text in banners

drag the template in a new project
then …
… click on the tiny grey triangle aside 'Banner01', and 'Banner Group'
this 'unfolds' grouped content
select/double click 'text here' ...
type your text

How can I control text color in a template?

Hi,
I've got a template I'm using to control a simple text
navigation menu. The menu is not even a list, it is just the
following text with links applied:
Page 1 | Page 2 | Page 3 | Page 4 ....etc
All the pages on my site use this template to control the
order in which pages appear in the navigation menu. The color
(a.link, visited, hover, and active) is controlled by css styles.
What I want to do is make the "Page 1" text a certain color when
the user is on Page 1, make the "Page 2" text a certain color when
the user is on Page 2, and so on. However, since I cannot edit any
of the individual pages (e.g. cannot apply a class style to
individual "Page x" text links) due to the fact that they are
controlled by a template and are not editable regions, I can't seem
to apply a certain color to the appropriate text link for the
corresponding page (i.e. can't make the "Page 1" text a certain
color only on Page 1). If I make the navigation text links an
editable region than I loose the ability to update those text links
via the template, so that's not an option. I fooled around with the
"Make Attribute Editable" tool, putting div tags around my text
links (<div class="text_color">Page 1</div>...I also
tried it with span instead of div), but couldn't get that to work.
Does anyone know how I can do this? Basically, I just want the user
to have a visual clue as to what page he's on while still being
able to use a template to create the pages (and residing navigation
menu).
Thanks so much.

NO NO NO NO NO!
Never make your navigation editable or you will shoot
yourself in the foot
when it comes time to change a link there and you would have
to touch every
page. <sheesh>
Give each of those links a unique ID, e.g.,
<a href="page1.html" id="link1">Page 1</a> |
<a href="page2.html"
id="link2">Page 2</a>....
Then in the head of each child page, add this to the Editable
Region called
"head" -
<style type="text/css">
a#link2 { color:whatever; otherstuff:whatever; }
</style>
Now you would just edit the embedded stylesheet to change
a#link2 to a#link3
or whichever button you wanted to affect on that page.
Alternatively, you can go here -
http://www.divahtml.com and get
their
DivaGPS extension.
DO NOT MAKE YOUR NAVIGATION EDITABLE.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"malcster2" <[email protected]> wrote in
message
news:ga5dev$e89$[email protected]..
> make those links editable regions on the template, and
apply the
> neccessary styles in the individual html pages

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content)

I just statred Flash CC for the first time and it seems that the text within the pop-up window (dialog box) is mis-aligned and not allowing me access to the command buttons, nor all the text. (ie: the NEW Template Box, can't see but 2/3 of the content) is there a fix to this problem? using 8.1, Monitor is a high res.2560x1440.

Another View.
the GUI is so hard to read (so small) I enlarge my Ps UI by the instructions below...which helped a lot.

How can I detect a certain text within a field within CASE using IF

Dear all,
for a transformation / generation of values receiving from R/3 into BW I try to
manupulate three fields. I have a problem detecting a string in a field.
I am using a CASE with several WHEN clauses on one field. Depending on the
value, an IF is integrated. There I look into another field evaluating, if it contains
a certain string. E.g. IF STRING CP 'xyz' OR 'abc'.
System gives error for the locigal expression. I also tried CS, but same error.
How can I detect a certain text within a field and which is the right logical
expression.
Many thanks in advance!!!
Claudia

Hi,
Folow the blow example...
May be it helps....
DATA: hex1 TYPE string,
hex2 TYPE string.
hex1 = 'FFFF'.
hex2 = '123FF'.
IF hex1 CP hex2.
ENDIF.
Cheers,
SImha.

How to apply style to partial text within a tag in xml file

I have created a webpage using Dreamweaver CS4 Spry Regions. Everything is functioning as expecting, however now I need to apply a style to part of the text. Every occurance of the company name needs to be in italics - the problem is that the company name appears within different parts of the text within a set of tags.
http://www.certifiedangusbeef.com/private1/sales/facts/index.php
ie - <description> this is my company name which must appear in italics</description>
In this example, only "company name" needs to be italicized. We have created an XSL file that applies the italics properly when the XML file is viewed in the browser. But it does not have any effect on the final web page - as though spry is blocking the XSL or we've missed a step in linking all the files together.
Here's the XSL code:
<?xml version="1.0" encoding="utf-8"?><!DOCTYPE xsl:stylesheet [
<!ENTITY nbsp   " ">
<!ENTITY copy   "©">
<!ENTITY reg    "®">
<!ENTITY trade "™">
<!ENTITY mdash "—">
<!ENTITY ldquo "“">
<!ENTITY rdquo "”">
<!ENTITY pound "£">
<!ENTITY yen    "¥">
<!ENTITY euro   "€">
]>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
    <xsl:template match="node()|@*">
        <xsl:copy>
            <xsl:apply-templates select="node()|@*"/>
        </xsl:copy>
    </xsl:template>
    <xsl:template match="text()[ancestor::description]" name="replace">
        <xsl:param name="pString" select="."/>
        <xsl:choose>
            <xsl:when test="contains($pString,'Certified Angus Beef ®')">
                <xsl:value-of select="substring-before($pString,'Certified Angus Beef ®')"/>
                <i>Certified Angus Beef<sup> ®</sup> </i>
                <xsl:call-template name="replace">
                    <xsl:with-param name="pString"
                    select="substring-after($pString,'Certified Angus Beef ®')"/>
                </xsl:call-template>
            </xsl:when>
            <xsl:otherwise>
                <xsl:value-of select="$pString"/>
            </xsl:otherwise>
        </xsl:choose>
    </xsl:template>
    <xsl:template match="text()[ancestor::item]" name="replace1">
        <xsl:param name="pString" select="."/>
        <xsl:choose>
            <xsl:when test="contains($pString,'Certified Angus Beef ®')">
                <xsl:value-of select="substring-before($pString,'Certified Angus Beef ®')"/>
                <i>Certified Angus Beef<sup> ®</sup> </i>
                <xsl:call-template name="replace">
                    <xsl:with-param name="pString"
                    select="substring-after($pString,'Certified Angus Beef ®')"/>
                </xsl:call-template>
            </xsl:when>
            <xsl:otherwise>
                <xsl:value-of select="$pString"/>
            </xsl:otherwise>
        </xsl:choose>
    </xsl:template>
</xsl:stylesheet>

An element attribute is set with the method
setAttribute(String name,
                         String value)or the
setAttributeNode(Attr newAttr)method.

How do I Create a Hyperlink to other text within same email?

I want to use Mail to send out Newsletters.
Content section would contain hyperlinked text to each section (or Heading in PC world) below.
How do I create a hyperlink to text within the same email?
It's not hard to do in the PC world, how about the Mac world?
I bought the book "Mac OS X 10.5 (ISBN: 978-0-321-50263-6) and it does not help with this matter but I've also asked the question at www.ExplainMyBook.com because I thought the book "Mac OS X 10.5 Leopard" might help me out.

not possible AFAIK. Mail html capabilities are pretty rudimentary and this is one of the things it can't do. You might be able to achieve it if you create an html file with such internal anchors in a some html editor, then open that file in safari and embed it into an outgoing email from there. i couldn't make it to work though when I tried.
You should probably stick with a different email client if you want things like that. I know Thunderbird can do it for example.

How do I format text within a TextArea

Hello,
I would like to create a simple text editor that performs
syntax highlighting. In order to do so, I would need the ability to
set the style of individual pieces of text within a TextArea. Is
this possible? Do I need to subclass the TextArea (or perhaps the
Text control) to do this? Any pointers in the right direction would
be appreciated. Thanks!

The issues around formatting text in the Flash Player are
numerous. There are several experts who have weighed in on this,
including .
Axel
Jensen who has made available a modification of the
RichTextEditor component. Additionally,
Jesse Warden has several older
articles in his blog on this issue. Finally, there is a
commercially available Flash/Flex text editor developed by Igor
(last name unknown to me), and found at:
http://www.flashtexteditor.com/.
Overall, the issue of accurately formatting text in
Flash/Flex has been an exercise in frustration, especially when
trying to implement htmlText and CSS. I am absolutely amazed that
Adobe's documentation for this very important aspect of web
development is either unavailable or deeply flawed, and on top of
that: How is the Acrobat Connect Buzzword application able to do so
much with text formatting, clearly within a Flex Framework, and yet
no concrete documentation of the techniques are available

My young kids have ipads and since I updated the software, but they have their own icloud account, predictive text within their messages shows all my contacts from my iphone but the contacts are not listed as their contacts, how do I stop this?

My young kids have ipads and since I updated the software, but they have their own icloud account, predictive text within their messages shows all my contacts from my iphone but the contacts are not listed as their contacts, how do I stop this?

I have deleted the iCloud account under my name on their iPads and replaced with their ones. Apple support said yesterday I needed to click the small 'I' by each name as it came up in the TO box and remove it. After doing rid for each contact under each letter of the alphabet it should remove them from latest contacts. Having done this, although I could not remove groups I had sent, I am not convinced they will not return once I have written a few texts, any ideas?

In CS6 - how can I un-blur text within a photo taken at a seminar of a powerpoint slide presentation

Is there a way in CS6 to un-blur or "clean-up" text within a photo taken during a powerpoint slide show presentation at a seminar ?

You can import pictures into programs such as Photoshop and sharpen them or make other corrections but the results will depend on how much information remains in your photo. It is always better to work with the original image than to copy it out of a power point presentation. I am moving the discussion to the Photoshop forum in case you need more help.

How to shift text within an envelope template

Similar Messages

Maybe you are looking for