How to Short Close Purchase Order

Hi Experts,
I have some PO's which is matrial we have received short, Now we want to short close these PO, Please guide me how i can short close the pending purchase orders.
Regards,
ViAngrish.

HI,
Go to ME2n and give we101 and click on dynamic selection
go to Purchase Document Header .....here delivery complete indicator ...put X there and excecute.
Hope Help U !
Regards,
pardeep Malik

Similar Messages

Not Be able to Close Purchase Orders with different Buyer ID

We have open Purchase Orders in system created by different buyers & now these Buyers are no more exist or there User ID has been disabled, now pls guide us how we can close those Purchase orders by using single User ID.
Pls note that we have many open PO's in system of of those period (inventory, Purchase & GL) which are closed.
Pls note that we cannot enable the those buyer ID which are disabled.
Regards
Umair

Hi, conc. request "Mass update%Document%" has worked & it replace the Buyer ID to newer one but still we arefacing problem in those Purchase Orders whose state is Pending for approval or Buyer has forwarded for approval but again those approver's who are also setup as buyer has left the company. Now pls advise how we handle those Purchase Orders or revert back their state from Pending for approval to initial state
Regards
Umair

Short close the order

hi everyone,
i got a query that how to short close the sto order . since is a loss in the transit

Hi,
You can go ahead and tick delivery complete indicator but be aware that you can still receive goods.
But will not be considered for MRP or shown in MD04 t code.
hope this helps.
regards
suresh

How to collectively close internal orders?

Hi,
Need your advise on how to collectively close internal orders. I'm trying to use tcode KOK4 but I can't seem to get the Close function in the function selection list. Appreciate your advise on the steps/tcodes to use to collectively process internal orders. Also, what is the proper order of closing internal orders? I need to run CO88 first before setting the internal order to status Close?
Thanks!

Hi,
There are some pre conditons for closing the order like the order balance should be zero, there should not be any purchase order open against the order etc. So, please run the settlment to close the order. If there is any Purchase order open, then that also should be closed.
Please check the status management configuration in SPRO>Controlling>Internal Orders, for getting the complete function in T.Code KOK4
Regards,
Rijo Paul

How to get the Purchase order Qty in the object dependency

Hi,
We are using variant pricing in the purchase order. I have condition type say u201CZVBPu201D for Pallet cost. I defined Pallet cost as 5 USD per each (pallet). I have to calculate Number of pallets = Purchase order Qty/ 5. The number of pallets should be rounded to nearest integer.
My question is how to get the Purchase order Qty in the object dependency?
Is there any reference table and field can be used to get Purchase order Qty just like we use MMCOM-VKOND for variant pricing.
Appreciate your help
Thanks,
Srini

Hi,
1. I do not have system now so I can not conclusively tell about table field .
2. Since I did it long back so I also do not exactly remember it, there are more than one place where PO qty appears for example Item overview and Item details - one of the PO qty when used in the characteristic do pull the PO qty which can be used for variant pricing (so request to please update the forum with the correct table and field once you find it - in the meantime if I get opportunity to get to system I will also try and find out ).

How to view the purchase order output

Hi all,
how to view the purchase order output in the transaction me23n?
How to obtain the purchase order output form?
Please help..

HI,
goto NACE tcode then select the purchase order type and go to output types u cna use standard one NEU and provide the sapcript name and form name default will be there with MEDRUCK and print program.
then in ME23n click on messages there create ur message type NEU and save it
then print the purchase order...
hope u get solved with this
Regards
Syed A

How to short close a Service PO

Hi Gurus,
How to short close a Service PO like we do for Stock PO by ticking Delivery Completed Indicator.
Regards

Hi,
If u used the Frame work PO document type for the Service PO.
Then change the validity of the PO to short close it.
If u have used the standard Po option then change the qty of the sevices to availed till date.
regards,
sujit

How to find Specfic Purchase Order is being edited or not

Hi Friends,
How to find Specfic Purchase Order is being edited or not.
Thanks in Advance.
Murali Krishna K

Hi ,
         When you are creating or editing a purchase order the table T160
has a field TRTYP which keeps a track or edit or create or display.
*     Masked
A     Display
B     Edit
C     Display from archive
E     Single-item planning
H     Add
V     Change
X     Initial transaction
S     Standard parameter: normal mode
U     Convert indiv. planned order
L     Delete
P     Planning file entry
K     Copy reference
D     Print
Please reward points if useful.

How pop up form Purchase Order !

How pop up form Purchase Order and show last record

Basically you perform same steps as you would do manually in B1 app, that is
- Click Modules - Purchasing A/P - Purchase Order = .ActivateMenuItem("2305")
- Click Data - Last Data Record = .ActivateMenuItem("1291")
Pls, try searching this forum for more details, it's all there.
For example, Load standard SBO form from add-on might be useful.
HTH
Juha

How can I send purchase order through SAP mail ?

How can I send purchase order through SAP mail ? Can any one explain whts the NACE settings?

just do it as <b>Anji reddy</b> said to you   ...or else ... in the purchase order trascation ...print it ... so that it will generate the spool request for that purchase order ....
so the   the belwo program is for sending <b>the Spool   Request data   as Email to any Email id ...</b>
The code below demonstrates how to retrieve a spool request and email it as a PDF document. Please note for the below program to process a spool request the program must be executed in background otherwise no spool request will be created. Once you have had a look at this there is an modified version of the program which works in both background and foreground. Also see transaction SCOT for SAPConnect administration.
*& Report ZSPOOLTOPDF                                                 *
*& Converts spool request into PDF document and emails it to           *
*& recipicant.                                                         *
*& Execution                                                           *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on      *
*& screen                                                              *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
                                    DEFAULT '[email protected]',
           p_sender LIKE somlreci1-receiver
                                    DEFAULT '[email protected]',
           p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
* Spool IDs
TYPES: BEGIN OF t_tbtcp.
        INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
      wa_tbtcp TYPE t_tbtcp.
* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
      gd_eventparm LIKE tbtcm-eventparm,
      gd_external_program_active LIKE tbtcm-xpgactive,
      gd_jobcount LIKE tbtcm-jobcount,
      gd_jobname LIKE tbtcm-jobname,
      gd_stepcount LIKE tbtcm-stepcount,
      gd_error    TYPE sy-subrc,
      gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject   LIKE sodocchgi1-obj_descr,
      it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_sender_type     LIKE soextreci1-adr_typ,
      gd_attachment_desc TYPE so_obj_nam,
      gd_attachment_name TYPE so_obj_des.
* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
      gd_destination LIKE rlgrap-filename,
      gd_bytecount LIKE tst01-dsize,
      gd_buffer TYPE string.
* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
        INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
           c_no(1)     TYPE c   VALUE ' ',
           c_device(4) TYPE c   VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
*        to sap-spool
*        spool parameters   %_print
*        archive parameters %_print
*        without spool dynpro
*        and return.
* Get spool id from program called above
* IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
    PERFORM convert_spool_to_pdf.
    PERFORM process_email.
    if p_delspl EQ 'X'.
      PERFORM delete_spool.
    endif.
    IF sy-sysid = c_dev.
      wait up to 5 seconds.
      SUBMIT rsconn01 WITH mode   = 'INT'
                      WITH output = 'X'
                      AND RETURN.
    ENDIF.
ELSE.
    SKIP.
    WRITE:/ 'Program must be executed in background in-order for spool',
            'request to be created.'.
ENDIF.
*       FORM obtain_spool_id                                          *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                 AND        jobcount    = gd_jobcount
                 AND        stepcount   = gd_stepcount
                 AND        listident   <> '0000000000'
                 ORDER BY   jobname
                            jobcount
                            stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
    message s004(zdd) with gd_spool_nr.
    gd_spool_nr = wa_tbtcp-listident.
    MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
    MESSAGE s005(zdd).
ENDIF.
ENDFORM.
*       FORM get_job_details                                          *
FORM get_job_details.
* Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
ENDFORM.
*       FORM convert_spool_to_pdf                                     *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.
*       FORM process_email                                            *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
* perform send_email using p_email2.
ENDFORM.
*       FORM send_email                                               *
* --> p_email                                                       *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
* Default subject matter
gd_subject         = 'Subject'.
gd_attachment_desc = 'Attachname'.
* CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod        = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod        = 'Message Body text, line 2...'.
APPEND it_mess_bod.
* If no sender specified - default blank
IF p_sender EQ space.
    gd_sender_type = space.
ELSE.
    gd_sender_type = 'INT'.
ENDIF.
* Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_mess_bod
                                      it_mess_att
                                using p_email
                                      'Example .xls documnet attachment'
                                      'PDF'
                                      gd_attachment_name
                                      gd_attachment_desc
                                      p_sender
                                      gd_sender_type
                             changing gd_error
                                      gd_reciever.
ENDFORM.
*       FORM delete_spool                                             *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
       EXPORTING
            spoolid = ld_spool_nr.
ENDFORM.
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
*       Send email
FORM send_file_as_email_attachment tables it_message
                                          it_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
data:   t_packing_list like sopcklsti1 occurs 0 with header line,
        t_contents like solisti1 occurs 0 with header line,
        t_receivers like somlreci1 occurs 0 with header line,
        t_attachment like solisti1 occurs 0 with header line,
        t_object_header like solisti1 occurs 0 with header line,
        w_cnt type i,
        w_sent_all(1) type c,
        w_doc_data like sodocchgi1.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
* Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
* Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Girish

How to create customer purchase order

Hi,
How to create customer purchase order?
Thanks & Regards,
Naren.

Dear Naren,
As you told we create a purchase order to the vendor by ME21N. This is done by the MM consultants. Now to create a purchase for the customer to say is nothing but to create a Sales Order based on the Purchase Order details of the custome by T.Code VA01.
Please get back if need any further explanation.
Thanks & Regards
Sadhu Kishore

How to deal with purchase order purchased with sale order

Hi,
I know we can produce with sale order, and the finished products can be priced in their own sale order and line item even when the finished product master data is set 'S' in its price control field. But how to deal with purchase order purchased with sale order if its price control is 'S' and the purchased material can be priced differently with its own sale order?
thanks.

Hi,
That is to say, we want to get these results:
1. material purchased must match its sale order and its item
2. the purchased material is valued by sale order and its item when it is put into the stock.
3. the purchased material is set "valued by standard price' in its material master data.
How to practice?
Thanks.

How to short close PO

I want to short close some Open PO.
I know that to do this we have to change PO with Tcode ME22N, go to item level at Delivery tab check the delivery completed through this we can short close PO but when i use ME22N to change PO its show error "Purchasing document has release indicator 2 (change not possible)"
While i use ME29N to unrelease PO it show an information "document has already been outputted(funcion not possible)"
Partial GR have done against these PO butI have to short close some PO so that no one create further document against PO.

Hi,
If Release indicator 2 is set then system will not allow to change the PO after Printout.
Now to short close the PO, it would be better to use mass maintenace T Code MASS with two option
1.   Give BUS2012 you can set the delivery complete indicator as complete.
Deliv. Compl.               MASSEKPO-ELIKZ
the system logic is that the "Delivery completed" indicator specifies whether a purchase order item is considered closed. This means that no more goods receipts are EXPECTED for this item. If the delivery completed indicator is set, the open purchase order quantity becomes zero, even if the full quantity has not been delivered. It is still possible to post goods receipts of remaining quantities, but these no longer change the open purchase order quantity.
Now Ask the ABAper to give the error msg for BADI MB_GOODSMOVEMENT
the Enhancement Spot MB_GOODSMOVEMENT has been extended. There is new BADi MB_GOODSMOVEMENT_DCI which could be implemented to check DCI and issue M7344.
Make MSg number M7344 as error
2. You can control with latest deliivery date. To give the latest delivery date as back date to which GR must be done
Latest GR Date     MASSEKPO-LEWED
To prevent goods from being accepted in the case of delayed delivery, youmust specify the latest possible goods receipt date for the item in the purchase order. This field is in the item detail data on the Delivery tab page. You also have to set
message 163, Last possible delivery date was... (work area M7), as a warning or error message in Customizing.
Now it is upto you, which solution you would prefer.
2 option is much easy !
Hope help U !
Regards,
Pardeep malik

Batch final close purchase order

Hi friends,
I have around 1000 purchase orders which need to be final closed. is it possible to final close them all at once (by any script or by doing any change in setup or by any other way)? If so please tell me how can i do that.
Thanks,
LISAN

Dear Amit,
Its quite illogical to demand a particular Batch of Product before procurement from Vendor. Normally the Batch field in the PO is to mention the colour of the product to be purchased from a Vendor. The colours of the product are basically maintained through MSC1N transaction with a material, storage loation, valuation type and a colour. Thats why you are able to see the drop down characteristics in the field provided in the PO.
This automatically gets populated from batch master, thereby it can be selected during the PO creation. This particualar data gets stored in the MCHA and MCHB table.
If you really want to maintain the vendor batch number, that is quite possible only during MIGO.
Regards,
DilliB

How to acheive the purchase order items in Crystal report

Hi
In crystal Report am using purchase order layout ,how to remove the unwanted space(i'm using only one item like cement alone so lot of space in page 1 )below screen shot show the clear view how to remove this using formula.if suppose am using 5 items that space will cover ,but for 1 item lot of empty spaces.
Regards
Vinoth

Hi Vinoth,
Please follow below Steps.
In Crystal Report for Report Footer Section -- Report >>> Section Report >>> Print at Bottom of Page >>> Uncheck
Please check attachment also.
hope thid help
Regards::::
Atul Chakraborty

How to Short Close Purchase Order

Similar Messages

Maybe you are looking for