How to show all regions when opening piano roll?

hey,
I want to be able to see all events in all regions when opening (not toggling!) a piano roll. I just switched from version 5 (yes, 5) to 9. It used to be like this: you deselect all regions and then just open the matrix editor (that's how the piano roll was called in ancient times).
If I do this in 9, the piano roll shows nothing. If I select all regions and open the PR, it shows only one. If I select one region, open the PR and then go back to the arrange window and select all regions it does show all info in the PR but this is a bit of a not-very-efficient work around.
Anyone any idea?
grtz
Janco

double click a region, then highlight the ARRANGE window and type command + a. It is essential to choose all regions this way not as you mentioned by choosing all by hand. Remember that when you doubleclick a region Logic highlights the PIANOROLL. So you have to highlight the arrange window by clicking on the bar just below the main tools or in other words, just above the ruler (I don't know the exaqct word for it but I hope you know what I mean.
Message was edited by: samplaire
Message was edited by: samplaire

Similar Messages

How to edit multiple regions in one Piano Roll window

I edit multiple regions in one Piano Roll window at the same time. (It is very handy way of editing especially in huge orchestra projects.)
I can see midi contents of all selected regions in Piano Roll at the same time.
1) But how to choose certain one region of many selected to edit it?
2) And how to edit all at once?
Hope the questions are clear enough.
Thanks.
Dmitriy.
iMac (27-inch, Mid 2011) 2,7 GHz Intel Core i5. 16 GB 1333 MHz DDR3.
OS X 10.10.2

First of all, the Piano Roll has two mechansim, of what it is displaying.
Selected Track: This displays all the Regions that you select in the Tracks Window
One Track: Selecting one Region in the Track Area displays all the Regions of tha tTrack in the Piano Roll. If you select multiple Regions in the Tracks Window, then the last selected Regions counts.
Whatever Regions are now displayed in the Piano Roll Editor can be edited. Select the MIDI Events and apply the command.
You can also apply edits directly to the selected Regions in the Tracks Window.
I explain all those little details in my graphically enhanced manuals ("Logic Pro X - How it Works")
One thing to be clear about:
Tracks Window: Any edit is applied to the selected Regions
Piano Roll Editor: Ay edit is applied to the selected Events
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

How to show all data when using more than one parameter?

Hi All,
I used a query like this to show the data in a report:
select col1, col2 // col1 and col2 are columns of tabale tab1
from tab1
where
tab1.col1 =
(case when :P_COL1 IS NOT NULL then // :P_COL1 IS A USER PARAMETER TO EQUAL COL1
:P_COL1 ELSE tab1.col1
end)
AND TAB1.COL3 =
(case when :P_COL3 IS NOT NULL then // :P_COL3 IS A USER PARAMETER TO EQUAL COL3
:P_COL3 ELSE tab1.col3
end)
The problem is when I run the report with paramters values or not, It shows the data which is not null for both col1 and col3.
That is when the value of col1 or col3 is null the report would not return that record!
I want the report to show all data not only values which is not null!
How to do this?

Rainer,
That where clause will fail when col1 in the table is null and the parameter has the dummy value. Consider the following:
variable p_col1 varchar2
exec :p_col1 := 'yourdummyvalue';
select
from
     select 'yourdummyvalue' col1 from dual
     union all
     select 'other' from dual
     union all
     select null from dual
     union all
     select 'X' from dual
) tab1
where nvl(tab1.col1,'yourdummyvalue') = nvl(nvl(:p_col1,tab1.col1),'yourdummyvalue')In this case, the query returns the row with null and the row with 'yourdummyvalue', where only the row with 'yourdummyvalue' should be returned.
You must do something like this:
where ( :p_col1 is null or ( :p_col1 = tab1.col1 ) )That one is the simplest and does not need a dummy value. Here are some other more complicated examples:
where nvl( :p_col1, 'yourdummyvalue' ) = decode( :p_col1, null, 'yourdummyvalue', tab1.col1 )or this:
where nvl( :p_col1, 'yourdummyvalue' ) = nvl2( :p_col1, tab1.col1, 'yourdummyvalue' )In the last 2 cases, it will not matter if the dummy value exists in the data, but they are unnecessarily complex.
Kurz

How to show all data when data is authenticated

Hi,
Now I have an application where the user has to be authenticated and the data is only shown to that user. I want a way somehow I can access all the data from all the users who have lodged it. Like in the azure portal it shows all the data which was lodged
in the same way I want it in a account.
Thanks!
pratik

Hi,
I think you may need to use some logic in your application, such as filter the data according to the user.
Hope this helps
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Organizer shows all thumbnails when opening, but if one selected it opens on that when re-opened???

The two books I have neithor offererend an explanation of how to get back to all thumbnails instead of the last one shown before closing.
Help, Help...
Don Wright

'but if one selected it opens on that when re-opened???'
Are you saying that if you double click an image in Organizer (so that Organizer now shows single image) and re-launch it you are shown only one image (which was doble clicked last time)? If that is so, then it as as designed that is Organizer remembers your settings from last session. To see all your thumbnails you can click on arrow back button on top left hand corner in PSE10 or earlier (in PSE11 you have 'back' button shown on sort by bar). Please let me know if I missed something.
~Andromeda

How to show all fields when we do not enter any data

Hello all,
Here i am creating the SSRS reports on SharePoint list data, Report is created successfully but the requirement is that when generation of report if i do not enter value of employee name that time .....I want the report must display all records of all employees.
Please suggest me....

Hi Anil,
If I understand correctly, you have create a report use SharePoint list as the datasource. When you run the report, you need to enter value of employee name to display corresponding values.
If we are use SharePoint list as datasource, we have two method to add parameter in the report.
Method1: Add filter in the dataset Query Designer dialog box.
In this situation, if we configure the filter with “(blank)” in the Value dialog box, we will get the situation as your post. In this method, we are get a single value parameter in the report.
Method2: Add a dataset parameter. Please refer to the steps below:
Create another dataset (DataSet2) in the report with EmployeeName field.
Add a parameter (ReportParameter1) in the report. Select “Allow multiple values” option in the General dialog box.
Click “Available Values” in the left pane, select “Get values from a query”. Please refer to the values below:
Dataset:     DataSet2
Value field:    EmployeeName
Label field:    EmployeeName
Click “Default Values” in the left pane, select “Get values from a query”. Please refer to the values below:
Dataset:     DataSet2
Value field:    EmployeeName
Right click DataSet1, select DtaSet Properties. Click Filters in the left pane. Please refer to the values below:
Expression:   [EmployeeName]
Operator:    In
Value:   [@ReportParameter1]
Reference: http://msdn.microsoft.com/en-us/library/dd220464.aspx
If there are any misunderstanding, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

How to show "ALL" Values by default in Page Drop-Down Lists in Pivot Tables

Hi Everyone,
Iam stuck with 1 problem please can any 1 help me if u know the solution.
Here is my problem:
How to show "ALL" Values by default in Page Drop-Down Lists in Oracle BI Pivot Tables?
For example, if you place Region in the pages area, a Region drop-down list allows the user to select a particular region, and see the data for only that region, rather than seeing all the Regions,But by default its not showing "ALL" option in the drop down list ,rather than doing that its showing result for only 1 region by default.
And an other problem with this pages area is, if we palce the multiple attributes in the Pages area in the pivot table, the (Fields)result is showing in vertically, the attributes 1 by 1(Every attribute in a new line) ,rather than showing like that, is there any way to show the results in horizantally?(We want to have it as a seperate drop drown list for every field horizantally not as a concatenated list).

Thanks Nikhil. But I am fetching the values from the LOVCache.java.
I am using <af:selectManyChoice>. Is there any way I can use LOVCache.java value for selecting default values instead of hard coding?
I mean to say can I write
unselectedLabel="#{LOVCache.entityTypeSelectionList.anyValue}"
where LOVCache.entityTypeSelectionList is used to populate the drop down box.
Regards,
Aseet

How to show all view tab (Main Report and all Sub Report) in Visual FoxPro 9

I use ActiveX from Crystal Report Developer XI for viewer in Visual FoxPro 9 and I already know how to show Main Report by using command:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the MyReport.rpt there is two subreport name :
1. MySubReport1
2. MySubReport2
My Question is :
How to show all view tab (Main Report and all Sub Report) at the 1st time we call ViewReport?
I try to using command :
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub=oRptOpen.OpenSubreport("MySubReport1")
oRptSub=oRptOpen.OpenSubreport("MySubReport2")
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
but only show Main Report (view tab name : Preview)?
Did I miss any command before I call oRptView.ViewReport?

Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a>

How to show all the user entry variables in a workbook.

Hi,
My user need to see in the workbook all variables he had entered in the variable entry popup at the openning of the workbook.
I know how to show all the variables, included the hardcoded variable in the query (with a text element, select the checkbox "Display All Statics Filters"), but I need only the user entry variables.
There is a way to print only these variables?
Thank you

Thanks, but the problem is that this workbook is my Global default workbook used for all the queries. So I only want the user entry variables visible automaticly.
There is a way to do that ?
For information, i'm using Netweaver 7.
Thank you

Older (tiger) cd photo library shows no pics when opened in iPhoto 11 (Mt. Lion)

older (tiger) cd photo library shows no pics when opened in iPhoto 11 (Mt. Lion) how do i get to view those pics ?...thanx

That library was created by iPhoto via Share ➙ Burn menu, correct? It's old enough that you may have to drag that library to the desktop and open it with the Finder. Then drag the subfolders from the Originals folder into your open iPhoto 9 library window to import.
OT

I don't see "Show all Bookmarks" when I attempt to organize my bookmarks.

The first step to organizing bookmarks is: Click the Bookmarks button and select Show All Bookmarks to open the Library window. I don't see "Show all Bookmarks" when I attempt to organize my bookmarks. My desired end result would be folders followed by individual bookmarks.

@Cuddlebug27
You clearly won't be able to import from something that no longer exists.
Do you perhaps have two computers? If you had Chrome on both and signed in to synchronize them at some point, then you could get your info over from the second device. Otherwise you really can't import from a browser that isn't there.
Also if you usually ran Chrome signed in with an email account, you could try downloading it again and see if your info comes back when you '''Sign in to Chrome''' with that account.

How to show all the search result in a report page

I have a report page which the user can enter first or last name to find the matched employees. The current report only show maximum of 15 matched results. How to show all of them in one page if more than 15.
Also, the employee name on the report is a link, how to make the link to be conditional. ( I mean it can be a link or not based on another column)
Thanks.
Jen

Hi, you can change the number of rows on the report definition page (15 is the default value)- that's also where you can change pagination and max. number of rows etc.
About the second question - you will have to use Case or Decode in your report query and have the value as link or not based on the condition column, something like:
Select Decode(condition_column, 'link_value', '<a href="f?p=YOUR_APP:PAGE_TO_LINK_TO:' || :SESSION || ':::::">display_column</a>' , display_column) From .....
Hope this helps.

How to show all items in the reading list? I think this option has been removed in Safari Version 7.0.2

How to show all items in the reading list? I think this option has been removed in Safari Version 7.0.2

Thanks. That solved it. I had my doubts since I wasn't concerned about my lost bookmarks. I was concerned about the broken functionality. In any event, restoring from a backup solved both the functionality and the lost bookmarks. I appreciate the response!

How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

how to solve the problem when opening program illustrator cs6
ERROR: 16
It is WINDOWS 8.1 / 64 BIT
help please

Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[    8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[    8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[    8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

HT1937 I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened

I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened. I need suggestions to make it work or the reasons for not working.

Yes TeeKnows, try deleting it and download it again. After finished installation if still shows black screen delete it out off 'running apps' by double tapping the home button and swipe it off. If still shows black screen then try fully turning off your iPad (holding the sleep button) and turn back on again.
I hope I helped
thanks
Lydia

How to show all regions when opening piano roll?

Similar Messages

Maybe you are looking for