How to show all the levels of managed metadata in Current navigation in SP 2013

I am trying to use Managed metadata navigation as Current navigation/Left navigation Bar in a SharePoint intranet publishing site. I found one problem when I was configuring it:
If we have the terms in the term set defined as follows:
├─> Root1
│ ├─> L11
│ │ ├─> L21
│ │ │ └─> L31
│ │ └─> L22
│ ├─> L12
│ └─> L13
├─> Root2
└─> Root3
(Please consider the indents as children of parent terms).
So, there are 3 root terms and 4 levels of nesting in the terms. When I configured this for navigation it showed me only the 1st level by default i.e. Root1 -> L11, L12, L13 , Root2, Root3 in the navigation. So, the navigation is not fully displayed. If
I navigate to a lower level, it shows me one more level below it and does not show the parent i.e. on navigating to L12, to shows me L21 and L22, but does not show the child L31 and the parent Root1. I presumed it would show me the full hierarchy.
I did some probing around and figured that I could fix this by changing the master page. I navigated to the html file of the master page and within the vertical navigation snippet I found "PublishingNavigation:PortalSiteMapDataSource" that had these
properties:
StartFromCurrentNode(true) ShowStartingNode(false)
I changed these values, that is, set 'StartFromCurrentNode' to false and 'ShowStartingNode' to true. I also set 'EnableViewState' to true which was false by default. Still , this did not fix the navigation
Any help would be highly helpful and appreciated. Thanks

Hi Sara,
Thanks for the reply. I actually modified the setting what you mentioned but still I did not get the Top Level Navigation. I guess what you mentioned will work on the Top navigation. But I am trying to display the top 3 levels in the left navigation.
├─> Root1
│ ├─> L11
│ │ ├─> L21
│ │ │ └─> L31
│ │ └─> L22
│ ├─> L12
│ └─> L13
├─> Root2
In the above tree, when i click on the L31 then the navigation is looking like
├─> L21
│ └─> L31
└─> L22
But I want to display like the below
├─> L11
│ ├─> L21
│ │ └─> L31
│ └─> L22
Regards... Mahesh

Similar Messages

How to show all the user entry variables in a workbook.

Hi,
My user need to see in the workbook all variables he had entered in the variable entry popup at the openning of the workbook.
I know how to show all the variables, included the hardcoded variable in the query (with a text element, select the checkbox "Display All Statics Filters"), but I need only the user entry variables.
There is a way to print only these variables?
Thank you

Thanks, but the problem is that this workbook is my Global default workbook used for all the queries. So I only want the user entry variables visible automaticly.
There is a way to do that ?
For information, i'm using Netweaver 7.
Thank you

How to show all the rows of a report in one page

My report has 30 rows, by default it just show 15 rows. I want to show all the rows just in one page, without cliking link or arrow to see the left.
In the Layout and Pagination:
Report Template: template: 15. Standard Report (PPR)
Pagination Scheme: Row Ranges X to Y (no pagination)
Display Position: Bottom - Right
Number of Rows: 1000
Number of Rows (item) 1000
Maximum Row Count: 1000
How to fix it?
Thanks.
Jen

Ok, I think I got it. I needed to blank out Number of Rows(item), Maximum row count and only populate Number of Rows. I was sure I did that before and it didnt work.
Do you think that the Sessions in Apex can cause unexpected results? I have found that when I make changes I have to log all the way out of Apex, close my browser and reopen everything to ensure that my change took. Does anyone else have this issue? I can move this into a different thread if need be.
Thx!

How to show all the search result in a report page

I have a report page which the user can enter first or last name to find the matched employees. The current report only show maximum of 15 matched results. How to show all of them in one page if more than 15.
Also, the employee name on the report is a link, how to make the link to be conditional. ( I mean it can be a link or not based on another column)
Thanks.
Jen

Hi, you can change the number of rows on the report definition page (15 is the default value)- that's also where you can change pagination and max. number of rows etc.
About the second question - you will have to use Case or Decode in your report query and have the value as link or not based on the condition column, something like:
Select Decode(condition_column, 'link_value', '<a href="f?p=YOUR_APP:PAGE_TO_LINK_TO:' || :SESSION || ':::::">display_column</a>' , display_column) From .....
Hope this helps.

How to show all the rows in a report

I have a report, and i want to show all the rows in a page, how to do it. Currently, i just show part of rows.
Thanks,
Jen

Jen,
I'm guessing you are using Application Express,...
Go to the region where the report is located, go to report attributes. In the "Layout and Pagination" section there is a setting called "Number of Rows". Change the setting, and that's it.

How to show all the rows in PRint html option in obiee 11g

Hi ,
I am facing a issue in obiee 11g(windows 2003 server). I have 2 environments (SIT & dev)
In dev I am not facing any issue but in SIT when i print the report in html only 1-25 rows are displayed.
What should i do to see all the rows
Thanks in advance
Abdul

Hi,
In your Dev Server its configured on instanceconfig.xml file that why are getting the all rows with setting pdf/print control properties.
1. Change instanceconfig.xml file in <biee11g_install>\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1 as following
<Views>
<Pivot>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>

<DisableAutoPreview>false</DisableAutoPreview>
<MaxVisibleColumns>5000</MaxVisibleColumns>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Pivot>
<Table>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Table>
</Table>
</Views>
3. Note the new elements added are the following to both <Pivot> and <Table>, the Pivot part controls Pivot view, and Table part controls Table View, my testing was done with Table View.
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
4. Restart Presentation Server from EM, then run your request, do pdf export to verify.
Note:
When a table or pivot table includes a large number of rows, a set of buttons can be displayed under the view. You can use the following buttons to page through the rows in the view:
•First 25 Rows — Displays the first 25 rows of data for the view. The number that is used for the First, Previous, and Next buttons is specified by the Rows per Page field in the "Table Properties dialog: Style tab".
•Previous 25 Rows — Displays the previous 25 rows of data for the view.
•Next 25 Rows — Displays the next 25 rows of data for the view.
•Display maximum (500) rows per page — Allows you to display as many as the maximum number of rows per page at one time temporarily. The default is 500. The administrator can specify a different maximum value that is displayed on the tooltip for the button using the MaxVisibleRows element in the configuration file.
For more Refer my blog post
http://obieeelegant.blogspot.sg/2011/09/unable-to-export-all-rows-from-request.html
Note: this same thing you can also configure your UAT/Prod Server. then its will automated so you no need to configure each report.its will affect all the pivot/table view
also its noted as a bug in obiee11g(11.1.1.3/5) and its fixed in obiee11.1.1.6.0 and above version
FYI:
Thanks
Deva

Report : How to show all the reports in Content Management

Hi,
Can anyone tell me how I can show the "Resource Locks" Report in Portal.
I can see 4 reports through Content Management -> Reports i.e. Approval Maintenance, Link Consistency, Resource Statistics, Time-based publishing.
If I want to add more reports over here than "How I can achieve it".
Also I have seen the settings System Administration -> System Configuration -> KM -> CM -> Repository Managers -> Reporting Repository
But here I find no combo box for Active Reports, so from where I can activate the reports and show them in Content Management -> Reports
Please help me.
Regards
Deep

Deep,
Are you talkign about the report which give you details of which Portal Objects are currently locked?
If yes, then you can go to System Adminitrator > Monitoring > Object Locking
Hope this helps,
*Points will be appreciated.

How to show all the data from playback area so that the statictics max and min analysis applies to the entire logged data.

I have a data file with 19 channels of voltage and I what to retrieve the maximum, minimum and mean of the entire run for each channel. When I do playback it does only 25 seconds of data and being a newbie I have no idea nor can see anyway of changing this.
One thought I had was to run playback with a save to LVM then go to mointor area and load the saved file followed by a statictics step.
Is there any other option?

We need more information to help you. Specifically, the following would be nice:
What format is your data file in (can you post an example? Please zip it to save space.)
Can you post your read and/or write code? The problem may be there.
What version of LabVIEW are you using. This can effect our recommendations.
As you discerned, there is no fundamental reason for this problem. On a side note, LVM is a poor format for large amounts of data or a disk buffer. I would recommend TMDS or HWS, depending on your version of LabVIEW.
This account is no longer active. Contact ShadesOfGray for current posts and information.

How to use evdre to display all the levels under the node user choose

I used SELF,LDEP(6) in the memberset of evdre trying to display all the 6 levels from the top node of NetIncome, all the display all the level with the correct amount except the top node which is displayed in the row key, but all the cell which should be the aggregation of all it's children is blank, if I choose only self, it shows the amount with only top level. how could I all the level and the corresponding amount display?

Hi,
Did you try SELF,ALL ?
Hope it works...
regards,
Raju

Show all the possible combinations of n elements in an array???

If I have an array of n elements, how to show all the possible combinations of n elements.
What is the java library for doing the combinations??
For example,
public class CombinationTest
{     public static void main(String[] args)
     {     ArrayList letters = new ArrayList();
          leters.add("s1");
          leters.add("s2");
          leters.add("s3");
Find all the combinations of 3 elements: C(3,2). Here's the result:
1) s1, s2
2) s1, s3
3) s2, s3
}

There isn't a built-in API method for this. Still, combinations are pretty easy. Pseudocode (borrowing notation from ML and GJ, and assuming immutable sets): Set<Set<Object>> getCombinations(int itemsInCombo, Set<Object> itemsToCombine)
    // Handle base case and exceptional cases
    if (itemsInCombo = 0) return Set.emptySet();
    if (itemsInCombo < 0) throw new Exception("?!");
    // Recursive case
    Object o = itemsToCombine.first(); // use iterator - may throw exception
    // Get combos with first element
    Set<Set<Object>> rv = map (x => x.add(o)) getCombinations(itemsInCombo - 1, itemsToCombine.remove(o));
    // Add combos without first element
    rv.add(getCombinations(itemsInCombo, itemsToCombine.remove(o)));
    return rv;
}

How to show all days of the year 1900

how to show all days of the year 1900

As you show days for any other year.
Do you want to catch us on the fact year 1900 wasn't a leap year?
Regards
Etbin
select to_date('1.1.' || :the_year,'DD.MM.YYYY') + level - 1
from dual
connect by level <= to_date('31.12.' || :the_year,'DD.MM.YYYY') - to_date('1.1.' || :the_year,'DD.MM.YYYY') + 1*** not tested ***
Message was edited by: Etbin
user596003

When I type in "www" in the navagation space I get a drop down that shows all the web sites I have visited! How do I turn this off?

# Question
When I type in "www" in the navagation space of the home page I get a drop down that shows all the web sites I have visited! How do I turn this off? edit

That drop-down shows matches from your History and/or Bookmarks. To change what is shown, see "Controlling Behavior" in this article:
*https://support.mozilla.com/en-US/kb/Location%20bar%20autocomplete
<br />
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
**New Adobe Reader X (version 10) with Protected Mode just released 2010-11-19
**See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''<u>Download link</u>''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''<u>Also see Download link</u>''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
#*Also see "Manual Update" in this article: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

How can I show all the results returned by a sql query?

Hi guys,
I need your help.
Let's say I have one table: TableA. Fields of TableA are aleg, anon, apes. The following sentence can return, in general, several rows: select anon from TableA where aleg = somevalue. I'd like to show the result of column anon but no luck. If I try to show the results in a TextArea and the origin is an sql query only shows the first row value. I tried Show as: show as text (based in PLSQL) and coding an anonymous plsql block as
DECLARE
v_anon TableA.anon%TYPE;
CURSOR v_cur IS
select anon from TableA where aleg = somevalue;
BEGIN
OPEN v_cur;
LOOP
FETCH v_cur INTO v_anon;
EXIT WHEN v_cur%NOTFOUND;
:FIELD_IN_FORM := v_anon;
END LOOP;
CLOSE v_cur;
END;
but in this case it's not shown any result.
So the first question is what kind of field should I use to show the result. And the second one is what can I do to being able to show all the results returned by the query (provided that is more than one single row).
regards

Hi Denes,
Just starting with apex. I think I know how to show the results in a report region. I've simplified the posted question.
A more detailed question would be: Suppose you have a region where you have put several text areas to accommodate the result of a multi-column query (lets say for TableA) that only returns one row, each column value returned put in a different text area. Also you want to show the values of other fields in TableB that depends on some value just retrieved from TableA and that you want all values retrieved (from TableA and the linked TableB) to be show in the same region. Is that possible? If yes, how?
Thank you in advance

I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?

I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?

You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

How to show all items in the reading list? I think this option has been removed in Safari Version 7.0.2

How to show all items in the reading list? I think this option has been removed in Safari Version 7.0.2

Thanks. That solved it. I had my doubts since I wasn't concerned about my lost bookmarks. I was concerned about the broken functionality. In any event, restoring from a backup solved both the functionality and the lost bookmarks. I appreciate the response!

How to show all the levels of managed metadata in Current navigation in SP 2013

Similar Messages

Maybe you are looking for