How to show all the rows of a report in one page
My report has 30 rows, by default it just show 15 rows. I want to show all the rows just in one page, without cliking link or arrow to see the left.
In the Layout and Pagination:
Report Template: template: 15. Standard Report (PPR)
Pagination Scheme: Row Ranges X to Y (no pagination)
Display Position: Bottom - Right
Number of Rows: 1000
Number of Rows (item) 1000
Maximum Row Count: 1000
How to fix it?
Thanks.
Jen
Ok, I think I got it. I needed to blank out Number of Rows(item), Maximum row count and only populate Number of Rows. I was sure I did that before and it didnt work.
Do you think that the Sessions in Apex can cause unexpected results? I have found that when I make changes I have to log all the way out of Apex, close my browser and reopen everything to ensure that my change took. Does anyone else have this issue? I can move this into a different thread if need be.
Thx!
Similar Messages
-
How to show all the rows in a report
I have a report, and i want to show all the rows in a page, how to do it. Currently, i just show part of rows.
Thanks,
JenJen,
I'm guessing you are using Application Express,...
Go to the region where the report is located, go to report attributes. In the "Layout and Pagination" section there is a setting called "Number of Rows". Change the setting, and that's it. -
How to display all the rows in a report
How will it be possible to show all the rows in a report, in a table view , other than modifying the table properties for each report individually ?
Is there some setting, so that for all tabular reports, all the rows will be displayed in one page?
I have added the following to the instanceconfig.
<Table>
<ResultRowLimit>1000000</ResultRowLimit>
<MaxCells>1920000</MaxCells>
<MaxVisiblePages>1000</MaxVisiblePages>
<MaxVisibleRows>64000</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>64000</DefaultRowsDisplayed>
<DefaultRowsDisplayedInDelivery>2000</DefaultRowsDisplayedInDelivery>
<DefaultRowsDisplayedInDownload>64000</DefaultRowsDisplayedInDownload>
</Table>
Still I can view only 25 rows for the report.
Thank you.Hi,
Open your report--> Select Table view--> Edit view properties-->Row per page --> Give here 9999999.
It will show all the rows in the report.
Hope this help's
Thanks,
Satya -
How to show all the rows in PRint html option in obiee 11g
Hi ,
I am facing a issue in obiee 11g(windows 2003 server). I have 2 environments (SIT & dev)
In dev I am not facing any issue but in SIT when i print the report in html only 1-25 rows are displayed.
What should i do to see all the rows
Thanks in advance
AbdulHi,
In your Dev Server its configured on instanceconfig.xml file that why are getting the all rows with setting pdf/print control properties.
1. Change instanceconfig.xml file in <biee11g_install>\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1 as following
<Views>
<Pivot>
<!--This Configuration setting is managed by Oracle Business Intelligence Enterprise Manager-->
<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>
<!--This Configuration setting is managed by Oracle Business Intelligence Enterprise Manager-->
<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>
<!--This Configuration setting is managed by Oracle Business Intelligence Enterprise Manager-->
<DisableAutoPreview>false</DisableAutoPreview>
<MaxVisibleColumns>5000</MaxVisibleColumns>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Pivot>
<Table>
<!--This Configuration setting is managed by Oracle Business Intelligence Enterprise Manager-->
<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>
<!--This Configuration setting is managed by Oracle Business Intelligence Enterprise Manager-->
<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Table>
</Table>
</Views>
3. Note the new elements added are the following to both <Pivot> and <Table>, the Pivot part controls Pivot view, and Table part controls Table View, my testing was done with Table View.
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
4. Restart Presentation Server from EM, then run your request, do pdf export to verify.
Note:
When a table or pivot table includes a large number of rows, a set of buttons can be displayed under the view. You can use the following buttons to page through the rows in the view:
•First 25 Rows — Displays the first 25 rows of data for the view. The number that is used for the First, Previous, and Next buttons is specified by the Rows per Page field in the "Table Properties dialog: Style tab".
•Previous 25 Rows — Displays the previous 25 rows of data for the view.
•Next 25 Rows — Displays the next 25 rows of data for the view.
•Display maximum (500) rows per page — Allows you to display as many as the maximum number of rows per page at one time temporarily. The default is 500. The administrator can specify a different maximum value that is displayed on the tooltip for the button using the MaxVisibleRows element in the configuration file.
For more Refer my blog post
http://obieeelegant.blogspot.sg/2011/09/unable-to-export-all-rows-from-request.html
Note: this same thing you can also configure your UAT/Prod Server. then its will automated so you no need to configure each report.its will affect all the pivot/table view
also its noted as a bug in obiee11g(11.1.1.3/5) and its fixed in obiee11.1.1.6.0 and above version
FYI:
Thanks
Deva -
ALV not showing all the rows! Please help!
Hi Experts,
I have webdynpro ALV report and I am using SALV_WD_TABLE as the reusable component. In component controller's WDDOINIT I have written the code for pulling teh data from R/3 table and binding it to ALV table.
In the view's WDDOMODIFYVIEW event I have written the following code to get subtotal and grand total of Qty column based on product column.
I have coded like this:
lr_field_settings ?= l_value.
lr_field = lr_field_settings->get_field( 'PRODUCT' ).
lr_field->if_salv_wd_sort~set_group_aggregation_allowed( ABAP_TRUE ).
lr_field->if_salv_wd_sort~create_sort_rule( ).
l_sortrule = lr_field->if_salv_wd_sort~GET_SORT_RULE( ).
l_sortrule->set_sort_order( if_salv_wd_c_sort=>sort_order_ascending ).
l_sortrule->set_group_aggregation( ABAP_TRUE ).
*...Aggregate Field PRODUCT
lr_field = lr_field_settings->get_field( 'QTY' ).
lr_field->if_salv_wd_aggr~create_aggr_rule( ).
lr_aggr_rule = lr_field->if_salv_wd_aggr~get_aggr_rule( ).
lr_aggr_rule->set_aggregation_type( if_salv_wd_c_aggregation=>aggrtype_total ).
It is working now but my ALV table is not showing all the rows. I have 6 products and it is showing from product 2. But it is calculating grand total and subtotal correctly. I am not able to see the first product row and subtotal for that. Even if I click on the ^ icon in the ALV table below it is not showing all the rows.
What could be the problem?
Please help
Thanks
Gopaldid you somehow manage to set the "first visible row" property on table object
to 2. Only thing I can think of that could cause this effect.
Cheers
Phil -
How to show all the user entry variables in a workbook.
Hi,
My user need to see in the workbook all variables he had entered in the variable entry popup at the openning of the workbook.
I know how to show all the variables, included the hardcoded variable in the query (with a text element, select the checkbox "Display All Statics Filters"), but I need only the user entry variables.
There is a way to print only these variables?
Thank youThanks, but the problem is that this workbook is my Global default workbook used for all the queries. So I only want the user entry variables visible automaticly.
There is a way to do that ?
For information, i'm using Netweaver 7.
Thank you -
How to list all the rows from the table VBAK
Friends ,
How to list all the rows from the table VBAK.select query and the output list is appreciated.Hi,
IF you want to select all the rows for VBAK-
Write-
Data:itab type table of VBAK,
wa like line of itab.
SELECT * FROM VBAK into table itab.
Itab is the internal table with type VBAK.
Loop at itab into wa.
Write: wa-field1,
endloop. -
How to make all the rows editable in webdynpro alv output
Hi,
How to make all the rows editable in webdynpro alv output.
Thanks
RaksharHi Rakshar,
Check this wiki:
http://wiki.sdn.sap.com/wiki/display/WDABAP/HowtoeditconditionallyrowofaALVtableinWebDynprofor+ABAP
Regards -
How to move all the standard and adhoc reports from cube to multi provider
How to move all the standard and adhoc reports from the basic cube to multi provider?
i created this multiprovider to do the maintenence on the basic cube. for example the infocube physical partition, line item dimension and compression.
what we decided to do is move all the Standard and ad-hoc reports from the basic cube to the multiprovider. How to do it? and make a copy of the basic cube and do the maintenence on the cube. please help.
Thanks in advance sdn experts!Hi Les,
This sounds good and one thing we try to always keep in mind when undertaking such activities is to always minimise the impact to the user and make the process as transparent to them as possible. So lets say you have your multiprovider and copied queries up in Prod, these queries will still pick up the data from the base cube.
Now you need to make a copy of the base cube for some changes to the cube model, I would suggest that you copy the cube and make your changes on the copied cube itself. Then 9depending on the changes done) you can load data from Original Cube to New Cube. When this is being done, make sure that you change your queries to add a restriction on 0INFORPOV by Original Cube.
After the load to the new cube is complete you can run reports restricted to each cube to verify the numbers. Then change the 0INFOPROV restriction in the queries to point to the New Cube and disengage the old cube from the multiprovider.
Hope this helps... -
How to show all the search result in a report page
I have a report page which the user can enter first or last name to find the matched employees. The current report only show maximum of 15 matched results. How to show all of them in one page if more than 15.
Also, the employee name on the report is a link, how to make the link to be conditional. ( I mean it can be a link or not based on another column)
Thanks.
JenHi, you can change the number of rows on the report definition page (15 is the default value)- that's also where you can change pagination and max. number of rows etc.
About the second question - you will have to use Case or Decode in your report query and have the value as link or not based on the condition column, something like:
Select Decode(condition_column, 'link_value', '<a href="f?p=YOUR_APP:PAGE_TO_LINK_TO:' || :SESSION || ':::::">display_column</a>' , display_column) From .....
Hope this helps. -
How to select all the rows of table control in BDC
Hi All,
While I am doing BDC for Transaction Code MC88, After the first screen I will get another screen with tabble control, Here I need to select all the rows of table control, I am assignng the 'X' to the first field of Table Control which is the indicator for selection.
Here I am getting message called Indicator field is not in program and screen.
While doing Recording I am not able to record the indicator, Please any one let me know how to record the Entire table control selection.
Thanks in advance..Sorry about that lakshmi. Here is my code.
PERFORM dynpro USING : 'X' 'SAPMMCP6' '0105',
' ' 'RMCP2-MATNR' t_matnr,
' ' 'RMCP2-WERKS' t_werks,
' ' 'BDC_OKCODE' '=AKTV'.
PERFORM dynpro USING : 'X' 'SAPLMCPA' '0707',
' ' 'BDC_OKCODE' '=MRKE'.
PERFORM dynpro USING : 'X' 'SAPLMCPA' '0707',
' ' 'BDC_OKCODE' '=GRAO -
Entity based VO not showing all the rows
Hi, I am having a entity based VO in a page. When we run a page from Jdeveloper the table shows all 1300 rows. But in Front end it shows onli 1001 rows
Hi ,
Or instead of setMaxFetchsize see By Johny explain setAttribute in OAF?
if it is helpful to you.. -
How to update all the rows of table using stored procedures
Hi,
I want to update all the rows of a table of a specific column
sp_a male
sp_b female
sp_c male
sp_d female
in above table
gender of all the columns has to be interchanged.Sir table is like this detail(name varchar(10),gender varchar(10))
Where Details are like this
Name Gender
sp_a
male
sp_b
female
sp_c
male
sp_d
female
I want to create a stored procedure which automtically updates gender from male to female and female to male
for all the rows . i.e., all the rows are updated for column gender by just running a stored procedure.
So after execution of stored proc the above table looks
Name Gender
sp_a
female
sp_b
male
sp_c
female
sp_d
male -
How to display all the questions of a survey in a page?
How to create multiple surveys in a survey list?How to display all the questions in a page and provide feedback button for each question?While giving the feedback user can ab. to see posted question date and posted person name.
sinduHi,
To display all the questions in a page instead of in a dialog, you can achieve it by using such an URL:
http://yoursite/Lists/survey1/NewForm.aspx?IsDlg=0
You can add a hyperlink with this URL into a page of your site, then you can navigate to the questions page by clicking this hyperlink.
About how to add a hyperlink into a page:
http://sharepoint.stackexchange.com/questions/55543/how-to-add-a-hyperlink-anchor-in-a-sharepoint-wiki-page
If you have several questions to ask, it is recommended to post them into every single thread to make others easier to focus on one question in one thread.
Feel free to reply if there is still any questions.
Best regards,
Patrick
Patrick Liang
TechNet Community Support -
How to display All the rows in a Table
Hi All,
Our requirement is, we need to display all the records of an VO in a table. We should not have navigation bar with previous and next. Runtime only will come to know how many records the VO has. Is it possible to achieve our requirement using setNumberOfRowsDisplayed() method in OATableBean ?Do u want to do it declaratively or programmatically.
Declaratively You can set no of rows property of table bean. If u want to set it programmatically then u can do it as discussed in the thread..
Regards,
Ram
Maybe you are looking for
-
Hi I just now was surprised with the unbelievable fact that fee's and interest's from a dunning letter are not recorded. I found note 1059948 to explain. Therefore, they are not included in the next level of a dunning nor will they stay open when the
-
Javascript won't work - JavaScript for Reader Mobile API Reference (Android)
I have created a Form with the new Adobe Acrobat Pro DC (trial version). The Javascript code just won't work on a mobile phone. Doc - JavaScript for Reader Mobile API Reference (Android this shows that what I want to do is supported. But not even the
-
IPhoto on Mountain Lion refusing to delete and constantly crashing
When I upgraded to Mountain Lion (last month),iPhoto began crashing every other time I used it AND it also refused to delete any of my photos! For instance, I will drag an individual picture over to the trash, drop it when it is highlighted, but the
-
Clear the itunes sync needed message on photo albums
Hoping someone can help....thanks in advance my old PC died. somehow I manage to save some high res images from that old PC on to the iPhone before it crashed. They appear in a second album. So, I have Camera Roll and Photo Library. Because those hig
-
WhAt Is WrOnG WiTh ThEUpPeR/loWeRCase
I use the GoBooks app but can never find the Books folder that appears in the desktop manager. Does anyone know where it is? I end up storing books in the download folder because I can't find them otherwise. Also, what the bleep is going wrong with t