How to show an 'outside man' to be 'inside a grave'?

I have need to show this in the present video project I am working on. I want to show a grave [say a white colored box lying overground in a cemetery] and a man lying on the ground beside the grave. In the video it should appear as if the man is lying inside the grave.
Thanks in advance.

somanna wrote:
I was laughing before I even went to your link. I am yet to do this type of editing. I have no studio and no green screen with me. Have a smooth red colored wall at home...would this do?
In principle, any color can be used, but the color of the background must be different enough from the subject.
In this case, I think it would be very hard to key out the background, because it is too similar to skin tones and part of the t-shirt.
Know about adjusting opacity but know next to nothing about blending.
I know next to nothing about blending, also... but it is very easy to experiment. Just try different modes.

Similar Messages

How to show sharepoint documents in salesforce ?

How to show sharepoint documents in salesforce ?
I should also be able to upload documents from salesforce directly to sharepoint document library/list if the users attach a document for a record in salesforce. Any idea how to achieve this?
What are the things need to be done if my sharepoint is available in intranet Or if it is SharePoint Online , how can we link this to salesforce (as Salesforce is global and can be accessed from anywhere). What are the security measures that I need to look
at and how to achieve this?
Ex:- I have a record in salesforce account object. I have to attach a document for that record which should be directly uploaded to sharepoint and shouldn't exist in salesforce, but it should display the listview to the users once its uploaded to sharepoint
and they should see them as if they exist inside salesforce, once they click on the link in the listview of the relatedlist, it should open the document from sharepoint.
Thanks in advance.

Hi,
According to your post, my understanding is that you want to show SharePoint documents in salesforce.
You need to integrate SharePoint with Salesforce.
Nick Swan
has written an article on how to integrate Salesforce and SharePoint 2007 through the Business Data Catalog.
But it might be useful as the theory is the same for using SharePoint 2010 and the Business Connectivity Services:
Salesforce and SharePoint
Outside of that, there are some useful third-party products you can have a look at.
Cloud Connector: http://www.layer2.de/en/community/FAQs/cloud-connector/Pages/Office-365-Salesforce-Integration-Migration-Replication.aspx
DocAve Data Replication: http://www.avepoint.com/salesforce-data-replication/?gclid=CNjZ8sGwl6kCFYEc4Qod-xD-uQ
DataZoom Script: http://www.siafoo.net/snippet/261
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to show a nice URL in Browser URL navigator?

How to show a nice URL in Browser URL navigator?
Hello
Arquitecture:
Internet --- Machine1 (Apache like Proxy Reverse and rewrite) --- MAchine2 (GLASSFISH-APEX LISTENER 2.0.1) --- DATABASE
That application will be like a directory of products, we need a nice indexation inside google, yahoo, etc...
We want to build an application with APEX, with a nice custom URL. like http:\\domain\pagina1\pagina2\pagina3
Limitations:
* We can not use frame
Actually, We obtained that when we write in a browsers URL domain "the domain" redirect to "http://domain/apex/f?p=600", and that appear in "browser url" but we want to know if is posible to change that without use frames.
Thanks.

Interesting Morten states that "You can use Apache with mod_rewrite to set up mapping between REST-style URLs to your Apex pages...", I've seen no working examples of how to do this with Apache because mod_rewrite is very limited in it's ability to process the query string part of the URL, with all the APEX stuff we need to refer to.
Morten if you are reading this, what's the secret man?

How to show pop-up at Interaction Center

Dear friends,
I would like to share with you how to show pop-up screen at Interaction Center.
As you should knows, IC doesnu2019t show pop-up screen, because the philosophy in IC is to avoid all theses pop-up.
Sometimes we need to show these pop-ups, so I want to explain how to do that.
Before CRM 2007.
Note 487734 - Popup windows in Customer Interaction Center
This consulting note explains how to do a simple change in standard abap program.
At CRM 2007, do the follow:
View CRMV_IC_POPU control in which Business transaction profile will be allows pop-up screen. This view can be maintained through tx SM30.
There are two field u201CBusiness Transaction Profileu201D and u201CAllows Dialog Boxu201D
The first one fill with the name of your Business Transaction Profile, unfortunately list value of this field is not working, so you must type the value correctly. Next, mark the check box u201CAllows Dialog Boxu201D.
You can find u201CBusiness Transaction Profileu201D name, doing the follow:
Tx SPRO, IMG, CRM, Business Roles, Define Business Role.
Select your Business Role and then double click on folder u201CAssign Function Profilesu201D, next at colum u201CFunction Profile IDu201D locate value IC_BT. Your Business Transaction Profile is the value at the field u201CProfile Valueu201D, standard value use to be DEFAULT.
Type this value, e.g. DEFAULT at field u201CBusiness Transaction Profileu201D in table CRMV_IC_POPU.
Best regards,
Lalas

I was dammed by a helldemon and so I will never be back to my dear CRM.
But anyhow, thanks man. I'm taking this to my I_SHOULD_REMEMBER_THIS file.

How to show more than one record at a form-like style report?

Hi All,
I developed a form-like style report
I want it to show more than one record at once (At the same page)
I tried that by setting the value to "Maximum records per page" property for the repeating frame to 10
but when I close the property palete and open it agian the value is returned to 1 !!!
how to show more than one record at the same page?????
Thank u

Hi,
there's perhaps another property like "page protect". If than 2 records didn't fit at one page there's a page break. Or is there any object inside the repeating frame with page-break properties? Sorry .. it's like looking into a chrystal ball ...
Regards
Rainer

How to show custom error message in WebADI Excel template?

Hi,
I've created a custom Web ADI integrator and associated it with a 'Procedure' based custom interface.
WebADI Interface API Returns is set to "Error Message".
I'm using raise_application_error(-20001, "Actual Error Message") for invalid rows,but custom error message from PL/SQL is not populated on the excel template.
Instead it is showing "SQL exception occurred during PL/SQL upload".
Am I missing anything? How to show custom error message from Pl/SQL procedure to WebADI Excel template?
TIA
Narasimha

The custom API errors are visible in the BNE log but not on the Excel.
BNE Log=>
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Exception while uploading to PL/SQL API. Error Code: 20001, Message: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Stack trace: java.sql.SQLException: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:202)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1005)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3550)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4710)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.bne.integrator.upload.BnePLSQLUpload.doUpload(BnePLSQLUpload.java:284)
at oracle.apps.bne.integrator.upload.BneSAXUploader.processDeepestLevel(BneSAXUploader.java:2346)
at oracle.apps.bne.integrator.upload.BneSAXUploader.startElement(BneSAXUploader.java:1182)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:181)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1288)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:234)
at oracle.apps.bne.integrator.upload.BneUploader.processUpload(BneUploader.java:301)
at oracle.apps.bne.integrator.upload.BneAbstractUploader.processUpload(BneAbstractUploader.java:114)
at oracle.apps.bne.integrator.upload.async.BneAsyncUploadThread.run(BneAsyncUploadThread.java:140)
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 WARNING        BneOracleWebAppsContext.getTimeZone CLIENT_TIMEZONE_ID has not been set
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 ERROR          BneOracleWebAppsContext.getExtraJDBCConnection recieved the same connection as the base connection. There may be transaction problems.
How to show the same error in the excel template?
Here is the package:
CREATE OR REPLACE PACKAGE BODY APPS.XXPO_COSTFACTS_WEBADI_PKG
AS
   PROCEDURE upload_data (
                          P_CONTAINER_ID IN VARCHAR2
                        , P_SAIL_DATE IN DATE
                        , P_PO_NO IN VARCHAR2
                         ) IS
    --declare
    lv_err_msg      VARCHAR2(240);
    lf_err_flag     NUMBER := 0;
    ln_temp         NUMBER;
    BEGIN
    --------------------- checking for mandatory parameters---------------------------
      IF (P_CONTAINER_ID IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg||'-'||'Please enter CONTAINER_ID - ';
      END IF;
      -------------Validation for Sail Date Format----------------------
      IF (P_SAIL_DATE IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg || ' ' || 'Enter Sail Date - ';
      ELSE
         BEGIN
            SELECT 1
              INTO ln_temp
              FROM DUAL
             WHERE P_SAIL_DATE = TO_DATE (TO_CHAR (P_SAIL_DATE, 'DD-MON-YYYY'), 'DD-MM-YYYY');
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format';
            WHEN OTHERS THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format'|| SQLERRM;
         END;
      END IF;
      -------------Validation for PO_Number----------------------
      IF (P_PO_NO IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg || ' ' || 'Enter PO_NO - ';
      ELSE
         BEGIN
            SELECT count(1)
              INTO ln_temp
              FROM PO_HEADERS
             WHERE Attribute4 = P_PO_NO;
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' No Oracle PO for Biceps PO#'||P_PO_NO;
            WHEN OTHERS THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Error getting the Oracle PO for Bicpes PO#'||P_PO_NO||' Error-' || SQLERRM;
         END;
      END IF;
     -----------------------Insert Record----------------------------
     IF lv_err_msg is NULL THEN
     BEGIN
         INSERT
          INTO XXP2P_HW_COST_FACTORS_STG
                 CONTAINER_ID
                ,SAIL_DATE
                ,PO_NO
                , ERROR_FLAG
                , ERROR_MSG
               ,CREATED_BY
                ,CREATION_DATE
                ,LAST_UPDATED_BY
                ,LAST_UPDATE_DATE
                ,LAST_UPDATE_LOGIN
            VALUES
                 P_CONTAINER_ID
                ,P_SAIL_DATE
                ,P_PO_NO
                ,lf_err_flag
                ,lv_err_msg
              ,FND_GLOBAL.USER_ID
                , trunc (sysdate)
                ,FND_GLOBAL.USER_ID
                , trunc (sysdate)
                ,FND_GLOBAL.LOGIN_ID
              -- commit;
              DBMS_OUTPUT.put_line
                '-' || 'After ap_invoices_interface'
        EXCEPTION
        WHEN OTHERS THEN
          ROLLBACK;
          lf_err_flag := 1;
          lv_err_msg := lv_err_msg || ' ' || 'error loading CONTAINER_ID-' || P_CONTAINER_ID || SQLERRM;
          raise_application_error(-20001, lv_err_msg);
        END;
    ELSE
          raise_application_error(-20001, lv_err_msg);
    END IF;
END upload_data;
END XXPO_COSTFACTS_WEBADI_PKG;

How to show modal window without popup in a web page using javascript

Hi,
How to show modal window without popup in a web page using javascript, means when the modalwindow is opened it should not ask for popup blocker alert......
pls help me.....

Thanx for ur reply,
Actually the senario is when i click on a button, another jsp page should be displayed in a modal window without popup, but the functions alert() and confirm() will not accept the url path of the another jsp page...

How to show "ALL" Values by default in Page Drop-Down Lists in Pivot Tables

Hi Everyone,
Iam stuck with 1 problem please can any 1 help me if u know the solution.
Here is my problem:
How to show "ALL" Values by default in Page Drop-Down Lists in Oracle BI Pivot Tables?
For example, if you place Region in the pages area, a Region drop-down list allows the user to select a particular region, and see the data for only that region, rather than seeing all the Regions,But by default its not showing "ALL" option in the drop down list ,rather than doing that its showing result for only 1 region by default.
And an other problem with this pages area is, if we palce the multiple attributes in the Pages area in the pivot table, the (Fields)result is showing in vertically, the attributes 1 by 1(Every attribute in a new line) ,rather than showing like that, is there any way to show the results in horizantally?(We want to have it as a seperate drop drown list for every field horizantally not as a concatenated list).

Thanks Nikhil. But I am fetching the values from the LOVCache.java.
I am using <af:selectManyChoice>. Is there any way I can use LOVCache.java value for selecting default values instead of hard coding?
I mean to say can I write
unselectedLabel="#{LOVCache.entityTypeSelectionList.anyValue}"
where LOVCache.entityTypeSelectionList is used to populate the drop down box.
Regards,
Aseet

How to show all view tab (Main Report and all Sub Report) in Visual FoxPro 9

I use ActiveX from Crystal Report Developer XI for viewer in Visual FoxPro 9 and I already know how to show Main Report by using command:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the MyReport.rpt there is two subreport name :
1. MySubReport1
2. MySubReport2
My Question is :
How to show all view tab (Main Report and all Sub Report) at the 1st time we call ViewReport?
I try to using command :
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub=oRptOpen.OpenSubreport("MySubReport1")
oRptSub=oRptOpen.OpenSubreport("MySubReport2")
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
but only show Main Report (view tab name : Preview)?
Did I miss any command before I call oRptView.ViewReport?

Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a>

How to show all the search result in a report page

I have a report page which the user can enter first or last name to find the matched employees. The current report only show maximum of 15 matched results. How to show all of them in one page if more than 15.
Also, the employee name on the report is a link, how to make the link to be conditional. ( I mean it can be a link or not based on another column)
Thanks.
Jen

Hi, you can change the number of rows on the report definition page (15 is the default value)- that's also where you can change pagination and max. number of rows etc.
About the second question - you will have to use Case or Decode in your report query and have the value as link or not based on the condition column, something like:
Select Decode(condition_column, 'link_value', '<a href="f?p=YOUR_APP:PAGE_TO_LINK_TO:' || :SESSION || ':::::">display_column</a>' , display_column) From .....
Hope this helps.

How to show filtered parameter in dropdown form in crm 2013

Hi,
I want to create a report in crm 2013. When I report is run then filtered parameter fill record from database in dropdown form and when I select record from dropdown then generate report of selected record. Please tell me how to show record in filtered parameter
from database within crm. In below image paramter is text field. How to auto fill filtered parameter from database.

Hi Aamir,
Check if the below link helps!!
https://social.microsoft.com/Forums/en-US/ad8a3bc2-dbec-4597-adfd-8bd6c34f5e9a/drop-down-parameter-in-crm-2011-custom-report?forum=crm
Thanks,
Prasad
Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question.

How to show GL Account Balance amount in Ledger Report.

Hi,
We need to show General Ledger balance based transaction wise how we can show GL Account Balance where it will store which table and which filed.here below query is there here only I need to add balance after Total please guide me.
select T0.transid,T0.number,T2.seriesname,T0.refdate,T0.baseref,T1.account,T1.shortname,T3.acctname,T1.credit,T1.debit,T1.credit+T1.debit as Total,T3.CurrTotal,T0.ref1,T0.ref2,T1.ref3line,T0.memo,T1.paymentref, T1.ProfitCode, T1.OcrCode2, T1.OcrCode3,
T1.OcrCode4, T1.OcrCode5,T1.U_Naration as RowNarration,T0.U_naration as DocumentNarration from OJDT T0
inner join jdt1 T1 on T0.transid=T1.transid
inner join nnm1 T2 on T2.series=T0.series
inner join oact T3 on T3.acctcode=T1.account
where T3.acctcode='1030101003'
Regds,
Sampath

hi sampath,
I giving u fair idea how to show g/l account balance
There is a field in JDT1 - journal entry rows - JDT1.DebCred which is indicator when g/l account
is debited / credited,it is filled with value D or C.
You can add Case syntax in existing query with condition JDT1.DebCred = 'D' then
JDT1.Debit + Opening/Closing balance and if JDT1.DebCred = 'C' then
JDT1.Credit - Opening/Closing balance.
It requires much time & effort to build this query.
Edited by: Jeyakanthan A on May 14, 2009 3:54 PM

How to show delivery date in Bex Analyzer

Hi Gurus!
I have to create a report in logistic scenario and my client wants that the report shows a column with the "Scheduled delivery date". I don't know how to show it in a column because in my KF structure, I can't put just this time characteristic.
Does anybody know how can I solve it?
Many thanks!

Hi,
Create a Formula Variable on Scheduled DeliveryDate with processing as replacement path, replace variable with InfoObject, replace with Key and use it in the new formula in the columns.
in this way query designer will accept you to use the char as in column,
hope it helps you.
Regards
Reddy A

How to show alv report in tree structure

hi all,
how to show data or create a alv report in tree structure.
thanks in advance.
Harsha

Hi Harsha,
Its done using FM 'RS_TREE_CONSTRUCT'
and FM for displaying the tree: 'RS_TREE_LIST_DISPLAY'
Thanks
Shrila

How to show deductions in ap invoice

Hi all,
how to show deductions in ap invoice
Scenario is:
We raise A/p Invoice for services provided by vendor,
ex:When the bill amount as 1000.00.
Invoice will be raised for 800.00, and paid, but
Remaining 200.00 will be deducted from the bill as Redemtion deposit (100.00), work control tax(100.00)
and this will be paid to vendor after certain period of time.
We want to show the above scenario in A/P invoice.
any idea how to work on the issue.
regards,
Kumar

Hi Kumar,
This scenerio can be handled by making use of the Freight Screen, In freight create the Freight Items, Redemption Deposit and WCT. Map the respective GL accounts in the AP Column in Freight Window. When you are creating the invoice u can enter the respective amounts in the Freight window with a negative sign.
This should solve your issue.
Regards,
Reno

How to show an 'outside man' to be 'inside a grave'?

Similar Messages

Maybe you are looking for