How to show blank as zero in Analyzer

Hi Experts,
I have a question regarding the display of empty cells as 0 .
I use some selections and for some selections there are no data (empty cell) in the query. But I need to show this empty cells as 0.
I Replaced  original key figure with a formula like: 0 + <your_original_key_figure> - this is also displaying the empty cells.
Is there any possibility to show it 0 although there is no data ?
Thanks,
Chandra

Hello.
The treatment of NULL-values (meaning cells without any values in the cube has been incorrect before.
The cell without any 0(blank) are not 0, but NULL. Here is the difference; NULL meaning: There is no corresponding value booked in the cube. 0 means there is corresponding data in the cube and this is 0.
So the settings for 0-display have no effect for NULL values.
Incorrectly before (in 3.x) the system displayed 0 for Null values when it should not have displayed anything.
The BW standard has no setting for changing the visualization of NULL values.They are always displayed as blank.
There is no solution for this because this is not an issue. But you can try a little workaround like described in note 794006: add '0' to the values in your formula, then 0 should be displayed, because 'null' + 0 should be 0.
If this suggestion does not works, try to update your frontend to latest version and try again.
Thanks.
Edward

Similar Messages

  • How to show records with zero on dashboard

    hi expert,
    if I have a dimension table product,
    a fact table
    if in the db, there are records with zero values of product A.
    if the logical column for the fact is SUM(...).
    how to show records with zero values on dashboard.
    Use the outer join?
    or other method?
    I dont wanna use outer join because it makes the PRD be so complicated

    hi,
    Pull all the columns to criteria ,it will show NULL for a product
    To get zero,on the fact column use IFNULL(fact_col,0)
    which will look like this
    http://a.imageshack.us/img180/6616/ifnull.jpg
    thanks,
    saichand.v

  • How to  show Blank values in Bex Report

    Hi friends ,
                       In my bex report one of the KF Column having zero's  and Blank values .
    Ex .   Mat     Price
              A         0
              B        
              C        15
                                    when i create a condition  Price > 0 
    Then the given Out put is    
                                            Mat     Price  
                                             C        15    
                                                                       but the required Out put is 
                                                                                                               Mat     Price
                                                                                                                B 
                                                                                                                C        15
    I.e  I have to Remove only zeros and i should show blank values. Could you pls give some Ideas on this .

    Hi friends thanks for response,
    but my requirement is
    Mat                 
    Price1
    Price2
    A
         0
    B
    12
    C
       15
    D
    0
    E
        8
    F
         0
    The Required  Out put should be
    Mat
    Price1
    Price2
    Price3 (1+2 )
    B
    12
    12
    C
    15
    15
    D
    0
    0
    E
    8
    8
    The user don't want see materials Price1 which  is Zero . So  I should remove materials A and F  in Price1 column .
    IF i apply condition on Price1 > 0  in the out put B and D also not displaying bcoz  blank values consider as Zero.
    Can you pls give some ideas how to full fill this Requirement

  • How to show delivery date in Bex Analyzer

    Hi Gurus!
    I have to create a report in logistic scenario and my client wants that the report shows a column with the "Scheduled delivery date". I don't know how to show it in a column because in my KF structure, I can't put just this time characteristic.
    Does anybody know how can I solve it?
    Many thanks!

    Hi,
    Create a Formula Variable on Scheduled  DeliveryDate with processing as replacement path, replace variable with InfoObject, replace with Key and use it in the new formula in the columns.
    in this way query designer will accept you to use the char as in column,
    hope it helps you.
    Regards
    Reddy A

  • How to show BLANKS in CURRENCY fields, if they r 0000000000??

    Hi Experts,
    Pls. clarify one of my simple doubt that,
    Am getting 0000000000 in my_alv_currency_fields.......for some reason, I wanna keep/show them as blanks.......So, How to get it done?
    I guess, I need to write from currency_filed to CHAR_currenny field and then using this CHAR_currency in my_alv report!! But, Is there any other way, coz, I dont prefer this idea according to this report.
    thanq

    Hi,
    did u try like this for that field........
    it_fieldcatalog-no_zeros = 'X'.
    Cheers,
    jose.

  • Blank as zero's

    hi,
    i need to get my keyfigure blank as zero's i tried in this ways
    1.nodim(KF)+0
    2.in qurey properties display tab display (i)display zeros (ii)display zeros as zeros.
    kindly tell me another way of possibles.
    Regards
    venkat.

    Hi Venkatesh,
    Try these links :-
    How to replace blanks by zero in a Bex Query output for key figure values?
    BEx Query- Making into Zero value in the blank row/column
    How to make the Blank Value Zero ?
    Regards
    Sunny

  • How to show a blank or clear cell for the first entry in a numbers pop-up menu on a mac. I can do it on the iPad but not on the mac. Thank you.

    Can you please advise how to show a blank or clear cell as the first option in a pop -up menu on a Mac, I can see how on an IPad but but not on the Mac.
    Thank you.

    Hi grm,
    Yvan Koenig wrote an Applescript to create an popup menu with a true blank menu item. You can find it in Yvan's Box Account public area. Click on for_iWork'09, then for-numbers'09, then look for and download popup_with_nil.zip. Unzip the file, then open it with ScriptEditor.
    Yvan's scripts include instructions (in French and English) on how and where to save the script and how to use it. I haven't read this one recently, so I can't give you any further details on it.
    Regards,
    Barry

  • My email Box show blank messages with date 31/12/00.This bug passed my 3GS to 4S.How can i fix this?

    My email Box show blank messages with date 31/12/00.This bug passed my 3GS to 4S.How can i fix this?

    My email Box show blank messages with date 31/12/00.This bug passed my 3GS to 4S.How can i fix this?

  • How to show graph of emc analyzer on labview?

    Hi guys,
     I have posted the question a few days before, now I still cannot get totally correct waveform.
     I use a Agilent E7405A emc analyzer, I would like to control the parameters (centre frequency, span etc.) I downloaded the driver and found the VIs that can change these parameters, but I really have trouble in showing the graph on the analyzer into the pc.
     The plot y-trace VI seems not working right. Do you guys have samples on showing spectrum graph? I'm using labview 8.2 so some examples on the net I cannot open, that is annoying. I really need help, thx.

    Hi
    I feel so to....maybe you can create user groups and also then have different actions ..... but this is a high price to pay for the same. You may want to prefix your action reason with two character country code, and train your users accordingly, You can also then have a user exit based on which user needs to use which action.......that's if you want a very strict controll.....best regards

  • Show Blank Key Figures as 0

    Dear all,
    I want to ask something,, is there any way to show blank/null key figures (in BEX analyzer) as 0?
    Thank you very much...
    Regards,
    Kevin
    Edited by: supertan on Jan 30, 2012 5:00 AM

    1.You can achieve your requirement by writing field level  Code at transformation level -
    if the SOURCE_FIELDS-<object> = ' ' (i.e. blank).
    result = 0.
    endif.
    2. Try to use Query settings - how to display data under Display Tab
    Zero Value display --- select : Zero without currency
    3.Create a formula and add KF with 0  ( KF+0)
    Use Boolean Function
    (KF > 0) * KF + (KF <= 0) * 0
    Regards,
    rvc

  • How to ignore blank/null key figure value in BI Queries

    Reports on Multiprovider - we see some cells of a Key figure as blanks. These blanks are interpreted as zeros by the system and calculated accordingly resulting in incorrect values. As per our requirement, we need a count of all hard/real zeros only, not the blanks. For example, if there are 10 rows of which 6 are real zeros and 4 are blanks - our count should be 6 and not 10.
    How to ignore the blanks in BEx queries please?
    Thanks for your help.
    Upender

    Rakesh,
    It is not possible to find a pattern because the report is on a MultiProvider with 2 InfoProviders- Purchasing documents DSO and Material Movements InfoCube.
    Every Purchasing Document has several materials associated with it. These materials are compared with materials in Materials Movement. Not all materials in Purchasing Document are found in Materials Movement. For those Materials found in Materials Movement, the Quantity is obtained. For these found rows, the correct value is showing up - if the quantity is zero, it is showing in reports as zero. If the material is not found in Material Movements then Quantity shows up as blank values.
    My requirement is ignore such blank quantities and not count them. Only Quantities with 0 values should be counted. Currently both blanks and zero values are counted showing inflated count.
    Thanks,
    Upender

  • How to remove blank pages from report

    Hi All
    i have a condition where i have to display the record only when trxn lines are available for that record ,inside my for each group condition i put the if condition having a count variable so if count is not zero then only the record will be displayed ,it works but problem is it shows blank pages for those records.
    any clue would be very helpful.Thanks in advance
    Thanks
    Pratap

    Hi All
    The solution of this issue is given in below mentioned thread
    How to avoid blank page in BI Publisher
    Thanks a lot to Vestrini :)
    Thanks
    Pratap

  • How to use blank space replace NULL on discoverer viewer

    Hi,
    There is a report that has a varchar field should show text values, and if NULL, I need it show blank space, and does in disco desktop, but on viewer, the same worksheet shows NULL.
    Even I changed in the Tools - Options - Format menu(desktop), it still show NULL on viewer.
    why?
    please help! thanks!
    sammy

    Hi Sammy,
    Unfortunately ‘some’ of the settings set in Desktop do not carry over to Viewer. These options need to be defined for Viewer itself.
    A temporary way to set the Viewer settings is to click on ‘Options’ when logged in Viewer itself. You’ll have to open a responsibility or report before this option becomes available to select. Within here you’ll be able to change the way NULL values are seen. However this method only makes the change for the User you logged in with.
    To make the change for all users, it’s best to edit the PREF.TXT file on the Discoverer Server. Please view the documentation below for more information on how to configure Viewer. For windows platform click here : http://download-uk.oracle.com/docs/html/A90287_01/toc.htm,
    For Unix platform click here : http://download-uk.oracle.com/docs/html/A90288_01/toc.htm. Once you’ve run the applypreference script, these settings will be forced down to all users of Discoverer.
    Hopefully this will help ;-)
    Lance

  • How to get blank data in alv?

    hi
    im finding the difference between 2-dates...
    below is my code......
    my problm is wn there is no data in the gstri field then v_dat1 should be blank...but im getting zeros...
    how to get blank instead of zero?
    IF <fs_final>-gstrp is not INITIAL and
      ( <fs_final>-gstri is not INITIAL ) .
    CALL FUNCTION '/SDF/CMO_DATETIME_DIFFERENCE'
          EXPORTING
            date1            = <fs_final>-gstrp
            date2            = <fs_final>-gstri
          IMPORTING
            datediff         = v_dat1
          EXCEPTIONS
            invalid_datetime = 1
            OTHERS           = 2.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    ENDIF.
        IF ( <fs_final>-gstrp GT <fs_final>-gstri ) AND
           ( NOT <fs_final>-gstri IS INITIAL ) .
          v_dat1 = -1 * v_dat1.
        ENDIF.
    Regards
    Smitha

    Hi,
    If you are using FM 'REUSE_ALV_GRID_DISPLAY' then In your fieldcatalog there is one component called 'no_zero' make it to 'X' like :
          WA_FLDCAT-TABNAME = 'IT_FINAL'.
          WA_FLDCAT-COL_POS = 1.
          WA_FLDCAT-SELTEXT_L = 'BOQ.Amt'.
          WA_FLDCAT-FIELDNAME = 'ZAMT'.
          WA_FLDCAT-NO_ZERO = 'X'.
          WA_FLDCAT-DATATYPE = 'CURR'.
          WA_FLDCAT-INTLEN = '20'.
          APPEND WA_FLDCAT TO IT_FLDCAT.
          CLEAR : WA_FLDCAT.
    That's it,it will not display if the field value is zero.
    Hope this helps,
    Thanks & Regards,
    Rock.

  • How to show 1 value in chart

    Hi there! just want to ask how to show the value 1 in chart?
    Thank you in advance!
    Best Regards,
    Jef

    Hi jefnavarro,
    According to your description, you hope the value 1 to be displayed in series. If so, please refer to the following steps to set minimum value of Horizontal Axis to zero:
    Right click anywhere of Horizontal Axis on the chart and open Horizontal Axis Properties dialog box.
    In Axis Options pane, in Axis range and interval section, click the expression (fx) button next to Minimum.
    In the expression text box, type =0, then click OK.
    The following screenshots are for your reference:
    If you have any questions, please feel free to let me know.
    Best Regards,
    Wendy Fu
    Hi there and good day to you! 
    First of all thank you for the clear steps that you share but I don't know why still won't come..
    maybe because my horizontal axis is starting from 1 as you can see on the lower part of my screenshot.. how can i set this to 0?
    thank you again.
    edited:
    just want to add that my data is only counting on data in Values [Count(Name)] in chart data maybe that's why i don't have 0 value?

Maybe you are looking for