How to show each color channel image of a video on Final Cut Pro X

Hi, Sir,
How to show each color channel (R or G or B) image of a video on Final Cut Pro X? I found this feature is useful for the image quality editing, such as the noise reduction.

Do you mean this?

Similar Messages

  • Exporting an image from a video in final cut

    Hey Everyone, I was wondering if there is a way of doing exporting a still image from a video in final cut.
    Sometimes when I want to do this, I just take a printscreen of the video Full screened, but I know that's probably not the best quality.
    Hope you can help me out, thanks in advance!
    Rishi

    videocrafter wrote:
    David Bogie Chq-1 wrote:
    Thanks for stepping into the conversation. Your post and the solution you offer, keep doing it till it works, implies many other issues, none of which are easily debugged from where I sit.
    You need to get a life. The guy has been waiting for days for you to answer his question. You didn't bother, so I simply offered him some verification that he's not the only one that has seen the problem. If you knew how to read (maybe you should read it again) you'll see that I was not offering him a solution. Grow up David.
    Message was edited by: videocrafter
    It's not that I "didn't bother" to answer the poor guy, I've been making a living. Been shooting video and timelapse in Hells Canyon, on the Snake River, where my company has a series of hydroelectric plants. Fabulous weather, great scenery, and a sphincter puckering jetboat ride down and then back up two sets of Class 4 rapids. I got my priorities. I would not have traded the photography or the ride for the effort required to answer anyone's questions.
    Thanks again for your contribution to the thread and your more recent character evaluation and time management suggestions. I'll keep them in mind in the same way I will try to recall Jim's Range Check admonition.
    bogiesan

  • How do I achieve a high quality PAL SD DVD from Final Cut Pro?

    From a PMW-EX1 camera file edited in Final Cut Pro I am unable to produce a high quality PAL SD DVD using compressor and DVD Studio Pro (tried multiple combinations).
    Using Final cut pro and Magic iDVD I can achieve a high quality SD DVD with no changes in export.But am limited to the iDVD restrictions.
    From discussions it appears using compressor and DVD Studio pro it is not achievable, it is very frustrating that the Apple product you have to buy is not as efficient as the free one?
    If not possible then how do I access the encoded file from IDVD?
    My Final cut pro sequence settings:
    General - Aspect ratio: HDTV 1080i (16:9) 1920x1080, square and upper(Odd)
    Quicktime video settings compressor: xdcam ex 1080i50 (35 mb/s vbr)
    I

    iDVD does everything automatically for you. With DVDSP and Compressor, all steps must be done correctly. The trade off is that you achieve better quality using Compressor over iDVD.
    1. First thing to do is export your sequence as an uncompressed interlaced 25i 720 x 576 16x9 Anamorphic QT.
    2. Determine your optimal bitrate by using a bitrate calculator. Here's a good one. Remember you need to account for all video on the disc, including motion menus.
    http://www.videohelp.com/calc.htm
    3. Bring your down converted QT into Compressor and use the manual settings set your bitrate. Also encode out a Dolby digital AC3 file. These files take up less bandwidth than uncompressed audio. Also remember to match your upper fiiled dominate filed order as well in Compressor. This must be consistent throughout the export and encoding stages.
    4. bring your encoded video and audio files into DVDSP and author

  • How do I import an iMovie HD project to my new Final Cut Pro X from an external hard drive?

    how do I import an iMovie HD project to my new Final Cut Pro X from an external hard drive?

    Any replies to this one? Anyone????

  • How do you import a Widescreen Quick Time File captured by Final Cut Pro?

    Hi
    Here's my workflow: I captured HD 1440X1080 footage in Final Cut Pro. FCP creates a folder of Quick Time Files in a Scratch Folder. A month ago, I had no problem importing the Quick Time files into IMOVIE HD 6 and preserving the widescreen format.
    Now, for some reason, when I import the same files into IMOVIE HD, it is squashing the image (stretching it vertically) and leaving a gray bar on the left side of the screen.
    Can IMOVIE HD import Widescreen QT files created by FCP? If so, how?
    All help appreciated.
    Phil

    iDVD does everything automatically for you. With DVDSP and Compressor, all steps must be done correctly. The trade off is that you achieve better quality using Compressor over iDVD.
    1. First thing to do is export your sequence as an uncompressed interlaced 25i 720 x 576 16x9 Anamorphic QT.
    2. Determine your optimal bitrate by using a bitrate calculator. Here's a good one. Remember you need to account for all video on the disc, including motion menus.
    http://www.videohelp.com/calc.htm
    3. Bring your down converted QT into Compressor and use the manual settings set your bitrate. Also encode out a Dolby digital AC3 file. These files take up less bandwidth than uncompressed audio. Also remember to match your upper fiiled dominate filed order as well in Compressor. This must be consistent throughout the export and encoding stages.
    4. bring your encoded video and audio files into DVDSP and author

  • How can I import HDV-Files from a CF-Card to Final cut Pro 5.1.4

    How can I import HDV-Files from a CF-Card (recorded with the Sony HVR Z 7E) to Final cut Pro Version 5.1.4 – is this possible at all?
    I managed to import the files to Premiere, but it was just a test. I am working at a very huge documentary project with Final cut Pro Version 5.1.4 thats why I would prefere not to change the program or the version.
    Simply exporting from Premiere back to final cut is also very complicated.
    Thanks for any ideas.

    First, copy the card to a hard drive connected to your fcp workstation.  I always back up all card based media at least 2 or three times.  All hard drive will eventually fail.  It's a question of when, not if.
    I'm not familiar with this particular camera, but examine the contents of the copied files and see if you can find any .mov files.  You can try importing these directly into fcp.
    If you don't, you can try something like clipwrap
    http://www.divergentmedia.com/clipwrap
    or
    Magic Bullet Grinder
    http://www.redgiantsoftware.com/
    But, I'd really advise upgrading to at least fcp6 or ideally fcp7 if you can find a copy.  HDV is a problematic format.  Although you can certainly work with it and it's a fcp approved format, converting your media to prores would make your life much easier.

  • How to replace audio on a music video with final cut pro x

    How do I replace low quality audio on a music video to a higher better quality audio with final cut pro x?
    I have the new audio on cd which I can rip and replace the original audio.
    Some audio and music videos are not of same length, In cases like this how do I sync video to the newly replaced audio?
    Is there any tutorial, link or where to look for this in the manual?
    Any help will be very much appreciated.
    Thank you in advance.

    Providing you don't need the video synced or cut to a beat, all you need to do is place your music in the primary storyline
    Connect your video above.
    While your video is connected, hit CMD+R on your keyboard and stretch the video to the length of the music
    If you were to cut the video to a beat, simply add markers on your music track, then connect and trim clips to your markers.

  • How can you make 3d models work in Motion 5 or Final Cut Pro for under 100$

    How would you be able to make a 3d model appear in Final Cut Pro or Motion and work, for cheap.

    Not sure what you mean by work or cheap but if you're looking to do 3D modelling on the cheap I'd suggest looking into Google Sketchup or Cheetah 3D- http://www.cheetah3d.com/. FCP X and Motion are not 3D modellers.

  • Color (not the new app) differences in Final Cut Pro vs Quicktime?

    Ok, so I have noticed this before but I am now working on a project in which this is a really big problem.
    See, here is a screenshot from the video after export and then opened in Final Cut Pro:
    http://www.nathankboyd.com/Apple-Support/Final%20Cut%20Pro.jpg
    And here is the same thing when opened with Quicktime 7.2.0:
    http://www.nathankboyd.com/Apple-Support/Quicktime.jpg
    Why is this, and can I fix it?
    My current project is not being put on DVD, so when it is viewed on a computer, it needs to look good. It also seems that anything that is quicktime based has the same color problems, which is not too surprising, ie: Keynote.
    Please help!

    I have the same problem. The same movie look brighter in Quicktime than in Final Cut.
    It's happen with H.264 and DV files. No problem with Pixlet files.
    This guys have the same problem
    http://discussions.apple.com/thread.jspa?messageID=5136225&#5136225
    http://discussions.apple.com/thread.jspa?messageID=5005097&#5005097
    But no one find the proper solution.

  • How do I zoom in and out on a clip using final cut pro 6?

    I have searched around and I haven't found anything about how to zoom in and out on non-still video. I am sure there is some simple explanation as of how to do this but I can't seem to find it. If you guys could help me out that would be great. Thanks.

    Double click the clip in the Timeline, to place it in the viewer.
    In the Viewer window click the Motion tab. Adjust the "Scale" control and set keyframes as needed.

  • How do I create some black video in Final Cut Pro?

    I am new to fcp having moved from premiere how do I create some black video in fcp please
    Thanks
    Derek

    Drew's right - and another way is to go to the same "film strip" (generator) to the right bottom corner of the middle box (called the Viewer) and select "Matte" > "color". It is grey by default, but in the viewer under Control you can select black. This way of making black will not lay in audio tracks, only black on the V1 - video track, (unless you have select another video track.

  • HT5148 how do i take my edited video from final cut pro and save it to my hard drive

    how do i take it from the program and save it as a .mp4

    Select File>Share>Masterfile and ensure that H.264 is selected.

  • I would like to know how to put a karaoke video on Final Cut Pro and then put my voice (singing) over it?

    I had bad experience with YouTube tutorials because it's hard to find the right tutorial video that applies to my enquiries, and I have to wait until the right time till the YouTuber gets to the point, and then I have to go back to find the exact spot which I need to see to learn what I want to know how to do.

    See, that's what I was getting at -- how basic of a step-by-step instruction did you need?  It sounds like you've never actually used the program.
    My first suggestion for you is to look at the "More Like This" list on the right side of this page.  You'll see similar posts, even ones specific to karaoke.  Read those, and see if your question is answered.  One person used Garage Band.  Maybe that will work better for you than FCP.
    As for step-by-step instruction, it's basically place your karaoke video on one track, then add your voice file to an audio track underneath it.

  • How can I share a video from Final Cut Pro to friends via WhatsApp please?

    As titled please.

    upload to YouTube/Vimeo
    share URL via Whatsapp
    Plan B)
    share to iTunes
    transfer to your iOS device
    share video via Whatsapp
    keep in mind: video is a bandwidth killer - do your friends like to waste 100s of MBs for a tiny stamp-sized video?

  • How to Export Video from Final Cut Pro to MiniDV Tape

    Hi Gays
    I need to export my "VIDEO"or my work, to MinI-Dv Tap in "FCP X"

    Try posting in the FCP-X forum...this is the Legacy FCP forum.
    https://discussions.apple.com/community/professional_applications/final_cut_pro_ x
    And refrain from calling people "gays." Not everyone here is. 

Maybe you are looking for

  • Discontinued part and follow up material

    Dear Guru, How to use discontinued and follow up material with effective date. I am using MTS Scenario. Please help. Regards, Sanjay Sahoo

  • Failing hard drive or ??? of FOUR new laptop?

    FOUR brand-new Toshiba Satellite C50 laptops - Windows 7 Steps taken:  Setup  Uninstall Norton Security Essentials trial  Install, update, and scan with Microsoft Security Essentials  Uninstall Norton Backup trial and Norton Anti-Theft  Download, ins

  • Experts Experience Are Required Here

    Dear Sir, I have copied this code from your article from oracle.com but I need to do one modification. I want to send the form name to the procedure to retrieve all the information instead of opening each form. Best regards PROCEDURE Get_Canvas_Names

  • ...InDesign then Editable PDF...

    Hi guys, Any idea of how to make a registry form in InDesign that i could later make and editable PDF or Word document? This is a sample of what i would like to do... http://www.pixentral.com/show.php?picture=1ms6j5vmUwgyUuD6y1HMxVr6NgutT1 The idea i

  • Audio and video track strangeness

    Hi, I have a few camera angles that have 4 audio tracks associated with them, and other camera angles that are just one track... I was attempting to stack all of my camera angles in fcp, so that I could sync the audio up for the various angles, and t