How to show health app data points as a graph

Some data points form a graph and others do not.

0FI_AP_0 - go to the master data infoobject of this datasource. Check mark charercteristics is an export datasource in the master data tab
Go to the infoprovider tab in RSA1, Insert this charecteristics as data target.
Use export data mart of this infoobject in your cube creation. You can use this in update rules for update of cube

Similar Messages

How to show muliti language data correctly using webi reports

Hi ,
Can you please suggest me how to show multi language data correctly in webi reports .
Do we need to install any lang pack in both server and client machine ?
Thanks & Regards
Venkat

you mean using translation manager? or data from DB? or both.
You need to make sure that your DB is already configured for multiple languages.
Enable the OS for multi languages
On XIR3.1, you will need to install language packs on the processing servers. then you can utilize translation manager.
Installation of Language Packs are a pain to install and update.

How can I plot two sets of data points in 3d graph?

I am trying to plot two sets of data points in 3d graph. I also need to make a set of data with one color and the other set with a different color. For example, I need to plot 10 (x,y,z) data points in 3d. Maybe 6 points need to be blue, and the other 4 red. Could you tell me how?

What is your LabVIEW version? (things are a bit different in 8.6).
Basically, you create multiple instances of the VI that gets placed automatically when you drop the 3D graph and then wire a different number to the plot ID at the bottom.
You define all the plots (color, style) via the properties dialog.
Have a look at my example posted here. One plot is "blue dots" and one is a "shaded surface". See how far you get.
Message Edited by altenbach on 04-23-2009 01:11 PM
LabVIEW Champion . Do more with less code and in less time .

How do I recover Apps Data from the iCloud on iPhone 4S with IOS 6.1?

How do I recover Apps Data from the iCloud on iPhone 4S with IOS 6.1?

You would have to restore to your entire iCloud backup, if you have one. (The backup includes app data.) Restoring to an iCloud backup has to be done in the initial setup process. If you have any data on your phone now that is not in the backup that you want to save you'll need to do that first. Then go to Settings>General>Reset and tap Erase All Content and Settings. You will then go through the setup screens as you did when the phone was new. When given the option, choose Restore from iCloud Backup. Be sure you are connected to wifi and your charger as this will take some time to finish.

In the Alarm & Event Query VI how to show the alarm data

In the Alarm & Event Query VI how to show the alarm data in the front pannel using the table or multicolumn listbox .thank you very much！！！

Hi,
Most likely there is something wrong with your specific database or your LabVIEW DSC installation. I just used the Alarm & Event Query.vi in my machine and it seems to work fine, I can see all the alarms as well as events containned in the database.
You may considerer generate another database (change the logging directory) and see if the behavior goes away. Also, make sure you have alarms and events on that database.
I could run the Alarm & Query.vi by just openning its front panel and placing the correct database in the appropriated control.

How can i delete app data on iPhone without uninstalling the app?

How can i delete app data on iPhone 4 without removing the application. Facebook application size -57mb. And its app data is 70mb

This is ridiculous!
Imagine this scenario, can't be that unlikely:
I'm going away on holiday, or away on work for a while, and I'm not taking the computer to which I sync my phone. Before I leave I fill my iPhone up with music to take with me. While I'm travelling I want to install a new app, but I don't have space. I look to delete content from the phone - I can delete podcasts but not music. Unfortunately I don't have enough podcasts to free up space that way. So I don't purchase the app I wanted.
This is bad for:
1. The user (me)
2. The app developer - lost download.
3. Apple - they lose their cut of the app download, and royally p#@* off a user.
Can someone explain to me why this limitation is good for anyone?!

How does iCloud manage app data like whatsapp ? Does it overwrite the data everytime I backup to I cloud with the data on the phone or it merges the data from previous backups with the new data?

How does iCloud manage app data( like whatsapp) ? Does it overwrite the data everytime I backup to I cloud with the data on the phone when i backup or it merges the data from previous backups with the new data?

You need to subscribe to iTunes Match to store your music on iCloud:
http://www.apple.com/itunes/itunes-match/
To transfer iTunes Store purchases made on your phone to your computer, connect your phone then choose "Transfer purchases..." from the File menu in iTunes.
Photostream transfers photos taken on your iOS devices to other devices and your computer. For troubleshooting Photostream see: http://support.apple.com/kb/TS3989

Exporting Health app data

I would like to use the Health app to record my daily blood glucose test results, but there doesn't seem to be any way to generate a report on the results for my doctor or export the data to a CSV or any other type of file. My doctor's practice is not set up yet to receive electronic results, so I still need to give him a hard-copy report. If anyone has figured this out, please let me know.

I had the same question. I couldn't figure out how to import xml data to Numbers or Excel for Mac 2011, but I found a way in LibreOffice using their Spreadsheet. I saved the xml file to the desktop, then opened a new spreadsheet in LibreOffice. Under the Data menu I selected XML Source. Click on the folder icon under "Source File" and find your xml file. In the window labeled "Map to Document", scroll down to "Record" and highlight it. This should highlight all the data labels related to your records (type, source, unit, value, etc.). In the "Mapped Cell" window, type "A1", then click Import. At this point, you can format as you like, or copy data to Numbers or Excel if you're more comfortable there.
Some notes on this:
(1) I couldn't find a way to edit the dates into a more readable format as M UND M describes for Excel. Since I measure daily, I just entered the date for the first day, then grabbed the lower right corner of the cell and dragged it down the column to fill in the dates myself. Or you could save the Libre file as a xlsx and then maybe M's instructions will work.
(2) Not sure if anyone else was this clumsy, but I had trouble finding a way to get the xml file in Health. You can't go straight from "Blood Pressure", "Heart Rate", etc. You have to go to "All" under Health Data and import a bunch of data you might not want. You can edit this out directly in the xml file (if you have access to Xcode or other software), or delete it after it's pasted into your spreadsheet.
(3) This is why I have 3 different types of spreadsheet software. None of them do everything I want!

How to move all app data from one user to another? (One mac)

Hi. I've been having this problem for a while. So recently, I've made a new account for myself, since I was using my mom's user account. I don't want to keep all of my files, emails, and icloud on her user, since it's used by everyone in my family. I use iMail now because hotmail blocked my email because "Someone hacked me" and they kept it locked for all these months, and I can't give enough proof to show it was mine, since I forgot every email I've sent now.
And iMail is pretty cool, adding your own rules and stuff. Except you don't need a password to log in. I just deactivate my iMail via system preferences as a log-out, and then re-activate it as a log-in.
So, back to the question.
How can I move ALL app data from my mom's user account to my new one? Her acount also has pictures of our germany vacation. So not every file.
You see, I game on my mac mostly because steam is really complicated, using internet just to play a game that doesn't need internet and stuff.
And steam doesn't have a lot of casual games.
So I want to move my game data, save files and every little piece of application info that my games have on my mom's account to mine. I've asked this question on Yahoo answers, and all I got was an answer of "File IS data, or datum itself, You are wrong. I cannot give you an answer." -.-
I'm not experienced with terminal either, so I'll need a ton of explanation of how to use it if that's how it can be done. It really really confuses me and I'll just give up.
Thanks in advance.
Oh and, side question, When will OS X Mavericks be open to public and how much will it cost?

Nour j wrote:
Oh and, side question, When will OS X Mavericks be open to public and how much will it cost?
http://www.apple.com/osx/preview/
Will be released sometime in the fall. Cost unknow at this time as Apple has not released this info to the public.

How to take a single data point for each trigger pulse ( synchronous acquisition).

hi
          im using the pci-mio-16E1 card, with the IDE VC++, so im looking for an example to explicate me how to make an synchronous acquisition data using an external timing, so the idea is to acquire (take) a single data point for each trigger pulse from one input channel ,and saving the data in a file .
now im making a code using the AI_setup and DAQ_op functions, im getting a speed acquisition (it is the start of acquisition data), and it is a synchronous acquisition just for one trigger pulse, and me i looking for an acquisition for each trigger pulse.
so to  understand my problem you can see my code :
iStatus = Timeout_Config(iDevice, lTimeout);
         iRetVal = NIDAQErrorHandler(iStatus, "Timeout_Config", iIgnoreWarning);
   // configuration and selection of signal trigger
         iStatus = Configure_HW_Analog_Trigger(iDevice, ND_ON, iLowValue,iHighValue, ND_ABOVE_HIGH_LEVEL, ND_THE_AI_CHANNEL);
        iRetVal = NIDAQErrorHandler(iStatus, "Configure_HW_Analog_Trigger", iIgnoreWarning);
iStatus = Select_Signal(iDevice, ND_IN_CONVERT, ND_PFI_2,ND_HIGH_TO_LOW);
         iRetVal = NIDAQErrorHandler(iStatus, "Select_Signal", iIgnoreWarning);
    iStatus = AI_Setup(iDevice, iChannel, iGain);
   iRetVal = NIDAQErrorHandler(iStatus, "AI_Setup", iIgnoreWarning);
   while ((iReadingAvail != 1) && (iStatus == 0)) {
/* Wait until reading is available. */
         iStatus = AI_Check(iDevice, &iReadingAvail, &iReading);
        iRetVal = NIDAQYield(iYieldON);
       // Acquire data from a single channel
    iStatus = DAQ_Op (iDevice, iChannel, iGain, piBuffer, ulCount, dSampRate);
   while ((iDAQstopped != 1) && (iStatus == 0)) {
        iStatus = DAQ_Check(iDevice, &iDAQstopped, &ulRetrieved);
        iRetVal = NIDAQYield(iYieldON);
       iStatus = DAQ_VScale(iDevice, iChannel, iGain, dGainAdjust, dOffset,ulCount, piBuffer, pdVoltBuffer);
      iRetVal = NIDAQErrorHandler(iStatus, "DAQ_VScale",iIgnoreWarning);
   /* Set analog trigger mode back to initial state. */
       iStatus = Configure_HW_Analog_Trigger(iDevice, ND_OFF, iLowValue,iHighValue, ND_ABOVE_HIGH_LEVEL, ND_THE_AI_CHANNEL);
/* Set PFI line back to initial state. */
       iStatus = Select_Signal(iDevice, ND_IN_START_TRIGGER,ND_AUTOMATIC, ND_DONT_CARE);
          iStatus = DAQ_Clear(iDevice);
/* Plot acquired data */
      iRetVal = NIDAQPlotWaveform(pdVoltBuffer,ulCount, WFM_DATA_F64);
so this is the data acquired -0.900879,-0.900879,-0.900879,-0.900879,-0.900879,-0.900879,-0.900879,-0.900879 and i think that is a noise because all time i get this data.
tank you very mutch fo your help

Hello,
Please see the responses to this thread at the following post.
http://forums.ni.com/ni/board/message?board.id=250&message.id=13686
Also, please only post one thread per issue.
Regards,
Sean C.

How can I convert 400 data points from a spreadsheet file to an array?

The spreadsheet file contains over 5000 data points (in one column) of which I only want the first 400 and want to convert them to an array in Labview. I tried to use the 'readfromspreadsheet' vi but it wasn't much help. Please tell me how i should approach this problem and what vi's to use.

I attach a model vi that you can experiment with. You will need to know the formatting of the data in your file, from there -plus the delimiter- you'll be able to estimate how many characters makes the first 400 data point. It's possible to develop a more robust vi to do this, in the mean time, the attached vi can quickly give some answer.
Attachments:
model.vi ‏28 KB

How to include the 1st data point date time in x

Hi,
I use a formular in the Interval from "Axis range and interval"
=IIF(COUNT(Fields!Date_Reading.value, "DataSet1") <=48 ,1 , 12)
However, it always missed the 1st data point date/time, please advise on how to include it always ... !
Thanks !

Hi kkcci8888,
Per my understanding that when you using the expression in the Interval you can't see the first date display in the label, right?
I have tested on my local environment and can reproduce the issue, the issue caused by the setting of the Interval. I assumed the 1st data point date time which haven't display means the minimum date in the report.
If you have specify an kind of "Interval Type", the first date not display as the label, if you keep the "Interval Type" as "Default", you will get it display correctly.
I recommend you to do the setting as below to get it display correctly:
Go to Horizontal Axis Properties
In Axis Options, Select the Axis Type as Scalar.
Deselect "Always include zero".
In Minimum box type [First(Sale_Date)]
note: make sure you have use the order by Sale_Date in the query to order the date already.
keep the "Interval Type" as "Default", the default means "Days", try to modify the expression to specify an new value of the Interval and the type will be "Days" by default.
Click "Labels" on the left pane to check you haven't select the "Hide first and last labels along with this axis":
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Health App Data Source Order With Apple Watch-

I discovered a very large difference between the number of steps counted by Health App and my other step tracking app Pacer. Pacer was indicating I had 10,000 steps while HealthKit was reporting about 6000 steps.
I then realized this was happening because of the order my data sources were for steps. The order was:
Apple Watch
iPhone
The problem is, the Apple watch does not track cycling as steps while the iPhone does. Because of this, when the Apple Watch is first in the data source list for steps it doesn’t count those cycling “steps”. I find this odd since Health App should be smart enough to merge the results; if the watch is reporting no steps and the iPhone is reporting 4000 steps, it should add the iPhone’s steps to the total.
But, if I go in and change the priority order to:
iPhone
Apple Watch
then, HealthKit reports the correct 10,000 steps.
The strange thing is, if I’m not carrying my iPhone and have my watch on, HealthKit does properly merge the watch's steps into Health App even though the Apple Watch is second on the priority list.
I’m not sure if this is a bug or a feature, but it’s important to make sure your data sources are in the correct order. I’ve gone in and made sure my iPhone is in the first position on all my stats.

Today I did a full restore thanks to this post Health app has crashed, data gone. and some spare time to sit down and do it.
After re-adding the apps to share their data the Health app appears to be working as it was before for me. Hope this helps.

How do I transfer app datas and notes manually?

My mom has an old iPhone that she's handing to me. Now I want to set it up as a new iPhone but I've been using it for a while so I want MY data in there to put it in the new set up. Any help?
I've seen the Lifehacker method from 2012 (iExplorer) but I am unsure if it works. Them making a video would help.
Also the same with notes. Is there a way I can export notes from her backup to my PC then bring it to the new setup without using Outlook?
Anyways, thank you!

Morning pieRr0Ur,
Article: HT4137 iOS: How to back up your data and set up as a new device should help you set it up as a new device.
Article: HT4946 iTunes: About iOS backups show everything that is backed up when it is backed up.
and
Article: HT1766 iOS: How to back up show how to backup and how iTunes will let you restore the device.
Hope this helps,
Mario

How do I know app data is backed up on iCloud?

So I have my iPad (1st Generation) synced to an old computer that I don't use anymore, and would love to restore it so i can sync it to my new computer. The problem I have is losing all of the app data, in particular many games. It's running iOS 5.0.1 so it has iCloud on it, and when I pull up the 'Manage Storage' under ' Storage & Backup' in the 'iCloud' setting on iPad, it shows there was a backup of the iPad (including the apps) as well as a separate category of "Documents & Data" where it only lists "Infinity Blade 2 Save Files".
So does this mean the only app data that is backed up is for Infinity Blade 2? Whereas the apps listed under "Backups" is just the physical app itself without data? Or do most apps just disguise it with the general backup rather than differentiating it like Infinity Blade 2 does?
I'd hate to lose progress in the other games like Temple Run, Angry Birds, Cut the Rope, Fruit Ninja, etc. hahaha
Thanks for the help!

Can anyone help me??

How to show health app data points as a graph

Similar Messages

Maybe you are looking for