How to show "Known As" field in ESS Personal info for GB
Hi experts,
we have a requirement where in we have to show the field "Known As" (technical field name RUFNM from info type 0002 Personal Details) in the ESS WDA applications for EHP6?
I have gone through the thread http://scn.sap.com/thread/3348479 but I could not interpret how exactly they were trying to do it.
We tried creating enhancements to the component configuration and thought of working on the copied component configurations but we are failing miserably in that. The application doesnt let us assign the copied component configuration to the standard appliction configuration. When the button Assign Configuration Name is clicked we dont see the copied component config in the list at all. We are totally clueless as to where we doing it wrong.
Can any one please help us? I would greatly appreciate a step by step guide.
thanks in advance
PK
Hi Sahir,
The problem was that the "Known As" field was available in the standard component
HRESS_CC_PER_DTL_PERSDATA_GB but for some reason it was not visible even thought it was set to visible in the component config UIBB configs.
This was a definite bug from SAP and they have released a not to resolve this. Note number 1891421 PA-PA-GB: Enabling IT0002 fields on HCM-Renewal and ESS sc
Once we applied the note, the field was visible to us.
Regards,
PK
Similar Messages
-
How to add 'Known As' field in ESS- Personal Information...Please guide
Hello All,
I have to show the 'Known As' field in the ESS->Personal Information page/workset.
Do I need to use NWDI for the same?
Please guide me as to how I can do this.
Awaiting Reply.
Thanks and Warm Regards,
Ritu
Message was edited by:
Ritu HunjanSolved it on my own.
-
How can i validate the field directline under personal information of ESS?
Hi all,
How can i validate the field directline under personal information--> communication data of ESS?The thing is we don't have NWDI setup in our organization.Is there any possibility of doing it under SPRO trn.
Thanks and Regards,
samHi,
This is probably a wrong forum that you have posted your question to.
Regards,
Siddhesh -
How do I add a field in my FormCentral application for applicants to attach files?
How do I add a field in my FormCentral application for applicants to attach files?
Hi;
Please see my response in this post: http://forums.adobe.com/message/5994307#5994307
Thanks,
Josh -
How to show a time field in a form portlet
Hi,
I am not familiar with PL/SQL and I was wondering how I could show a time field on a form portlet.
I have a date column in my database that stores the time and date together, but I do not know how to separate them into date and time fields. I also do not know how to concatenate them when a user inserts a new record, or how to query on a date alone.
At present, the user has to type the date and time following this format mask hh:mi am DD/Mon/RR
I also have a problem with one of my hidden id fields. I have set the default to a sequence.nextval (#qtc_app.seq_visitor.nextval) and then hidden it since
it is irrelevant to my users. However, I can no longer use the query function since the sequence is always generating a new value. How would I only generate
a new sequence no. when a user inserts a record??
Thank you!
cheers, KimHi,
Each colunm in the form has a format mask associated with it. For the date column make the format mask like this DD-MON-RR HH.MI. This will show the date along with the hours and minutes.
Thanks,
Sharmila -
How to mask a particular field depending on the user for a protected pdf?
Hi,
I have a requirement of showing a particular fiels data to only one user and to hide that critical data to others. For example, suppose I have two users viz, Primary user and Secondary user. I have a field named UID in my protected pdf form which has some critical data. I want only my Primary user enter and view the information entered in the UID field. When the Secondary user opens the document using his credentials, he should not be able to view the data in the UID field. It should be displayed in astrix as in a password field. Can anyone help me how to acheive this for a protected document?
Thanks and Regards,
Maria JohniIt is possible. You should be having a field in your XSD schema for the username. Bind the username to a hidden field in your form.
In the designer, in form initialize event,
write the code: if hiddenfield.rawValue == "person A"
subform1.presence = "hidden";
if hiddenfield.rawValue == "person B"
subform2.presence = "hidden";
subform1.presence = "visible" }
In your process, when your moving from one step to other step, update the uname accordingly and the form will respond according to the username.
Regards,
Chaitany -
Sequence mySequence = myEngine.NewSequence();
mySequence.Name = "myAction";
//Create new step of type Action and set Name
Step mystep = myEngine.NewStep(AdapterKeyNames.DotNetAdapterKeyname, StepTypes.StepType_Action);
mystep.Name = "GetStringObject";
//Obtain the code module from the step
DotNetModule myModule = mystep.Module as DotNetModule;
//Set properties of the module
myModule.SetAssembly(DotNetModuleAssemblyLocations.DotNetModule_AssemblyLocation_File, @"C:\Documents and Settings\My Documents\Visual Studio 2005\Projects\HelperClass\HelperClass\bin\Debug\HelperClass.dll");
myModule.ClassName = "Class1";
myModule.MemberType = DotNetModuleMemberTypes.DotNetMember_GetProperty;
myModule.MemberName = "StringObject";
mySequence.InsertStep(mystep, 0, StepGroups.StepGroup_Setup);
mySequence.Locals.NewSubProperty("StringObject", PropertyValueTypes.PropValType_Reference, false, "", 0);
DotNetParameterDirections reference = mySequence.Locals as DotNetParameterDirections;
mySequence.Locals.GetPropertyObject("StringObject", 0);
myModule.ClassReference = "Locals.StringObject";
myModule.LoadPrototypeFromMetadataToken(385875969, 0);
After this I am not able to proceed.herewith attached documents contain screenshot of teststand file marked red is to be solved. How to define the value field of the return parameters?
Attachments:
HelperClass.cs 1 KB
ex1.gif 2305 KBPlease see my answer to your question on page two of the following forum thread:
Programmatically generating DotNet Steps in TestStand
Manooch H.
National Instruments -
How to set a key field in a local provider for BW workspace
Hi Experts,
I've created a local provider through BOBJ analysis for excel / Workspace designer in a BW workspace. However, all the dimensions by default are not having the key field enabled and I'm not able to enable the key field through BW workspace. Also I see the Fact Index Without Key is enabled by default in technical settings, which is not allowing me to select "Fact Index with Key" either. When I go to edit mode, it says "Analytic Index XXX can only be changed in workspace designer". I even tried to go into workspace designer and by selecting the necessary local provider, I coudn't find an option under Local Provider->Reload Provider->Reload (With Changes)->Choose File->Edit Columns to enable the key field(s) for the dimensions.
Can you please help to locate how to enable the key field for dimensions in local provider.
Thank you in advance.
Regards,
KarthikThere's nothing to solve. If Reader (XI only) is used only PDF files can be selected. This is how it's supposed to work (although I agree it's silly and should be changed).
-
How to show a date field in OIM self-registration page
Hello gurus,
I want to add a date field in the self-reg page. I added lines in FormMetaData.xml and tjspSelfRegistrationTiles.jsp. The user creation page (delegated administration) shows the right date field, but the self-reg page is not working. I am using uix.tld dateField tag and don't know what attributes to pass to this. Is this the right tag or there is some other one in the tld, and what attributes should I pass?
Could someone tell me how to do this?
Thanks
SKIt should be much simpler than what you are doing.
You should be able to create a User Defined Field for the value. Then update the FormMetaData.xml file. Create an entry in the section for user information that creates the attribute value. Just copy one of the existing and give it a new unique number identifier. Also change the field it references to be your user defined field. Then update the Self Registration section to include the new attribute. If you want to update what the approver sees, then also update the section for the approver.
-Kevin -
How to show a text field based on what is entered in a date field
Hi there LiveCycle experts!
I have a form with a text field that I want to show only if the value of the previous date field once entered is less than 1 month from today?
Any help appreciated, been researching in vain for hours!!!
SarahWow Steve - thanks so much this is so exciting I just love learning these new scripts.
I assume I need to make the text field 'Hidden' - ?
I seem to be struggling a little to get it working - are you able to have a quick squizz at my document - it is in the very early stages!
Regards,
Sarah Milne
FACEBOOK : Join our 'BritBound Social Events' Group on Facebook to receive details of forthcoming social events...click here to join.
For a sociable & stress free arrival experience!
BritBound London Office: Britain & London Visitor Centre, 1 Regent Street, London, SW1Y 4XT.
Tel UK: | 0845 450 3536 | From OS + 44 (0) 20 7808 3815
Tel OZ: | Sydney: (02) 8003 7651 | Melbourne: (03) 9005 8304 | Brisbane: (07) 3102 9766
Tel NZ: | Auckland: (09) 889 3175 | Wellington: (04) 889 2015 | Christchurch: (03) 669 2032
Website: www.britbound.co.uk
E-mail: [email protected]
Click Here to find out more about: | UK VISAS | MOBILE PHONE CONTRACTS FOR NEW ARRIVALS TO THE UK | UK ACCOMMODATION | AIRPORT TRANSFERS | UMBRELLA COMPANIES | DISCOUNTED INTERNATIONAL BANK TRANSFERS | SOCIAL EVENTS | TAX REFUNDS | NATIONAL INSURANCE (NI) NUMBERS
Disclaimer: The information contained in or attached to this message is intended only for the people it is addressed to. If you are not the intended recipient, any use, disclosure or copying of this information is unauthorised and prohibited. This information may be confidential or subject to legal privilege. BritBound cannot accept liability for any virus damage caused by this message. This documentation is for your general information, and is not to be construed as advice. Clients should not act on the information contained herein alone, and should seek independent advice if necessary. -
How to show all available fields in the SQL Worksheet's Code Assist pop-up
I have table with many fields and wanted to scroll through the fields list by typing something like:
select a. from test a
The Code Assist pop-up (after the 'a.') that shows the field list shows '...' as last available field before '*'. Many fields are not shown on the pop-up. I have to click on the '...' field to tell the pop-up to refresh itself with a full list of fields. Is there a way that I can configure SQL Worksheet to always show all fields on the pop-up, instead of having to select '...' on every attempt to add a field to the select SQL?Sure, happens to everyone ;)
Not the case here, but often the OP gives credit to the first to respond rather than acknowledging everyone's effort and time invested, which of course is independent from posting order. Add that to the nicely conceived, but badly implemented reward point system. Should have moderators for that to work as it should. Sooo many questions remain unanswered and/or unrewarded. I even think you're the most underrated helping hand on the forum. Let's hope time will rectify all that...
Regards,
K. -
How to show all table fields in correct alv disply
Hi all,
This is my report that disply in ALV . but this is only displying the join table (t_p0001_p0002) fields.i want to disply the other two table fields i.e t_pa0315 and t_pa0007.what is the logic to ALV disply the other two table fields like the table t_pa0001_pa0002.pls help me regarding this.
send me the code its urgent.
thanks!
Vipin
pls find the code below:->
REPORT Y_WP03 .
DEFINE m_fieldcat.
add 1 to ls_fieldcat-col_pos.
ls_fieldcat-fieldname = &1.
ls_fieldcat-ref_tabname = &2.
append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
TYPE-POOLS: slis. " ALV Global types
tables:pa0001,
pa0315,
pa0007,
disvariant.
Selection-Screen
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
*SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: s_pernr FOR pa0001-pernr. " Personnel No
SELECT-OPTIONS: s_orgeh FOR pa0001-orgeh . " Organization unit
SELECT-OPTIONS: s_werks FOR pa0001-werks. " Personnel Area
SELECT-OPTIONS: s_plans FOR pa0001-plans. " Position
SELECT-OPTIONS: s_ebeln FOR pa0315-ebeln. " Purchase order
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK b2k2 WITH FRAME TITLE text-002.
*SELECT-OPTIONS: s_var FOR disvariant-variant.
PARAMETERS: p_disva1 LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK b2k2.
Type Definition *
TYPES :
BEGIN OF ty_pa0001_pa0002,
pernr TYPE pa0001-pernr , " Personnel no.
endda TYPE pa0001-endda , " end date
begda TYPE pa0001-begda , " start date
bukrs TYPE pa0001-bukrs , " company code
werks TYPE pa0001-werks , " Personnnel area
persg TYPE pa0001-persg , " Employee group
persk TYPE pa0001-persk , " Employee subgroup
btrtl TYPE pa0001-btrtl , " Personnnel subarea
abkrs TYPE pa0001-abkrs , " Payroll area
kostl TYPE pa0001-kostl , " cost center
orgeh TYPE pa0001-orgeh , " Organizational Unit
plans TYPE pa0001-plans , " Position
nachn TYPE pa0002-nachn , " Last name
vorna TYPE pa0002-vorna , " First name
midnm TYPE pa0002-midnm , " Middle name
END OF ty_pa0001_pa0002 ,
BEGIN OF ty_pa0315,
pernr TYPE pa0315-pernr , " Personnel no.
kostl TYPE pa0315-kostl , " Sending cost center
lstar TYPE pa0315-lstar , " Activity type
werks TYPE pa0315-werks , " Plant
lifnr TYPE pa0315-lifnr , " Vendor number
ebeln TYPE pa0315-ebeln , " Sending pruchase ord
ebelp TYPE pa0315-ebelp , " Sending PO item
lstnr TYPE pa0315-lstnr , " Activity number
END OF ty_pa0315,
BEGIN OF ty_pa0007,
pernr TYPE pa0007-pernr,
schkz TYPE pa0007-schkz,
END OF ty_pa0007.
*BEGIN OF ty_pa0002,
pernr TYPE pa0002-pernr,
nachn TYPE pa0002-nachn,
vorna TYPE pa0002-vorna,
midnm TYPE pa0002-midnm,
*END OF ty_pa0002.
Data Declaration *
DATA :
t_pa0001_pa0002 TYPE STANDARD TABLE OF ty_pa0001_pa0002 ,
w_pa0001_pa0002 TYPE ty_pa0001_pa0002 ,
t_pa0315 TYPE STANDARD TABLE OF ty_pa0315 ,
w_pa0315 TYPE ty_pa0315 ,
t_pa0007 TYPE STANDARD TABLE OF ty_pa0007 ,
w_pa0007 TYPE ty_pa0007 .
t_pa0002 TYPE STANDARD TABLE OF ty_pa0002 ,
w_pa0002 TYPE ty_pa0002 .
START-OF-SELECTION .
SELECT a~pernr
a~endda
a~begda
a~bukrs
a~werks
a~persg
a~persk
a~btrtl
a~abkrs
a~kostl
a~orgeh
a~plans
b~nachn
b~vorna
b~midnm
INTO TABLE t_pa0001_pa0002
FROM pa0001 AS a INNER JOIN pa0002 AS b
ON apernr = bpernr
WHERE a~pernr IN s_pernr
AND a~werks IN s_werks
AND a~orgeh IN s_orgeh
AND a~plans IN s_plans.
SORT t_pa0001_pa0002 BY pernr .
IF NOT t_pa0001_pa0002[] IS INITIAL .
SELECT pernr
kostl
lstar
werks
lifnr
ebeln
ebelp
lstnr
FROM pa0315
INTO TABLE t_pa0315
FOR ALL ENTRIES IN t_pa0001_pa0002
WHERE pernr = t_pa0001_pa0002-pernr
AND kostl = t_pa0001_pa0002-kostl
AND ebeln IN s_ebeln.
SELECT pernr
schkz
FROM pa0007
INTO TABLE t_pa0007
FOR ALL ENTRIES IN t_pa0001_pa0002
WHERE pernr = t_pa0001_pa0002-pernr.
SELECT pernr
nachn
vorna
midnm
FROM pa0002
INTO TABLE t_pa0002
FOR ALL ENTRIES IN t_pa0001
WHERE pernr = t_pa0001-pernr .
ENDIF.
PERFORM f_display_data.
FORM f_display_data.
DATA:
ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv.
Build the field catalog
m_fieldcat 'PERNR' 'PA0001'.
m_fieldcat 'NACHN' 'PA0002'.
m_fieldcat 'VORNA' 'PA0002'.
m_fieldcat 'MIDNM' 'PA0002'.
m_fieldcat 'BUKRS' 'PA0001'.
m_fieldcat 'WERKS' 'PA0001'.
m_fieldcat 'PERSG' 'PA0001'.
m_fieldcat 'PERSK' 'PA0001'.
m_fieldcat 'BTRTL' 'PA0001'.
m_fieldcat 'ABKRS' 'PA0001'.
m_fieldcat 'ORGEH' 'PA0001'.
m_fieldcat 'PLANS' 'PA0001'.
m_fieldcat 'SCHKZ' 'PA0007'.
m_fieldcat 'KOSTL' 'PA0315'.
m_fieldcat 'LSTAR' 'PA0315'.
m_fieldcat 'WERKS' 'PA0315'.
m_fieldcat 'LIFNR' 'PA0315'.
m_fieldcat 'EBELN' 'PA0315'.
m_fieldcat 'EBELP' 'PA0315'.
m_fieldcat 'LSTNR' 'PA0315'.
m_fieldcat 'BEGDA' 'PA0001'.
m_fieldcat 'ENDDA' 'PA0001'.
Display the list
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = lt_fieldcat
TABLES
t_outtab = t_pa0001_pa0002.
ENDFORM. " F_DISPLAY_DATA_VBAK
FORM USER_COMMAND *
FORM user_command USING u_ucomm TYPE syucomm
us_selfield TYPE slis_selfield. "#EC CALLED
CASE u_ucomm.
WHEN '&IC1'.
READ TABLE t_pa0001_pa0002 INDEX us_selfield-tabindex INTO
w_pa0001_pa0002.
CHECK sy-subrc EQ 0.
ENDCASE.
ENDFORM. " USER_COMMANDHey,
Look at ur code.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = lt_fieldcat
TABLES
t_outtab = <b>t_pa0001_pa0002</b>.
Here you're passing only the join table t_pa0001_pa0002. If you want to display the other tables as well, then u must have an internal table that has the columns of all the 3 tables. Then u need to buil;d the fieldcatalog accordingly and then display that table,
Cheers,
Sam -
How to include Business Place field in the line item for argentinian comp?
Dear,
We've just implemented a company code from Argentina, but when we try to post a document, the system doesn't show the field Business place in the line item, so we can't fill this field. This problem is causing some posting errors for us. Is the any way to set this field in the transaction FB01?
We have already checked the field status for account and posting key. The field is not available is this functions.
Thanks in advance,
Leandro AlbertiniHi Albertini,
Follow the path as follows and configure the business place for your plant and company code:
SPRO, Financial Accounting, Financial Accounting Global Settings, Tax on Sales/Purchases, Basic Settings, Settings for Tax on Sales/Purchases in South Korea, Assign Business Place.
In this activity, you can assign a business place to a plant. The business place is recorded for each posting.
Please reward points if helpful.
Regards,
Sreekanth.... -
How to show/hide build in search box in javascript for LightSwitch html clients?
Hi
For each collection on content item, there is built-in showSearch button we can add, once the user clicks on the search, a pre-built-in-search-box shows up above the collection so user can search items in the list. How can I show/hide the pre-built-in-search-box
in javascript?
Any help will be appreciated
The built-in showSearch on content item
The user clicks the search button, and the pre-built-in-search-box shows up to allow user to enter search terms
jlHi Joe,
Welcome to Lightswitch forum.
If you want to show/hide showSearch button, you can execute this line to show the button,
this.FindControl("showSearch").IsVisible = true;
Or execute the line below:
this.FindControl("showSearch").IsVisible = false;
Please let me know if there is anything that I can do to help.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
HOw to translate lables & selection field titls in diff lang for ABAP query
Hi,
I have one report to be displayed using sap query , in that
I need to translate the output fields lables and fields which are on selection screen of query into diff languages like FR, IT, ES and all.
How can I do it? Can anybody help me ?
I found one tcode SQ07 , but it will translate only selection screen fields but even the space is limited.
Regards,
MrunalHello,
For this please maintain the output field labels as text symbols.
After doing so, choose from menu GOTO->Translation.
Now it will ask you for the language to translate into.
Hope this answers your query.
-Rajat
Maybe you are looking for
-
How do I print with only one cartridge that has ink?
I have windows 7 and HP Officejet Pro 8600 n911a Printer. When the color inks depleted I could still print w/black tho had to click on permission stuff. Now that the black ran out and I have replaced it with a new cartridge it will not print in bla
-
How to get the status of MessageBridge STATUS consistently?
Hi I am using Mbean to get the status of messaging Bridge. try { Iterator iterator = localHome.getMBeansByType("MessagingBridgeRuntime").iterator(); while (iterator.hasNext()) { MessagingBridgeRuntimeMBean bridgeInfo = (MessagingBridgeRuntimeMBean)it
-
hi, i have lost my excel file that has psw from my flash and when i tried to recover it it could not recover the psw on it :( is there any tool helping me to recover it, please advice
-
ITunes plays but no sound/Loss of sound control in audio output
Two problems have popped up since I had my logic board/power supply replaced, and had 1G of memory added this week. First, I imported a new CD into iTunes - it took almost 3 hours! Now, iTunes "plays" my music (all music - not just this one CD) but t
-
Diplaying the contents in spool.
hi all, I am suppose to create a material on batch job processing which runs for everynight,I wanted to show the sucessful materials which were created last night. In what way can i achieve it? Thanks in Advance for your help. Tina