How to show overexposed areas in Photoshop?

This funcion is in Lightroom, but not in Photoshop. Is there a way how to see overexposed areas in Photoshop?

Do you mean in post #25, the one immediately before yours? I think we need JJ to come along and clarify that. The comma robber has run off with his punctuation, and I'm buggered if I can work it out either.
But rule of thumb is that once a pixel, or pixels, are at value 255, that's full white, amd all three channels are fully exposed. But I think what JJ is saying, is that there might be more information in the RAW file. Even if one or two channels are at 255, there might be some detail in the other. JJ will have to clarify, but I think he is talking about having two versions of the RAW conversion and stack them as layers in a single Photoshop document. You can then mask in just the area you want.
JJ's post, is dated July 2012, and CS6 with Camera RAW PV 2012 (Process Version 2012) was released in May 2012, and I'd have thought you could get all the infor there was there to get, out of a single go with PV2012. It's local adjustments being key, but the entire update of ACR was a big improvment over the previous version, and especially in extreme highlight and shadow detail recovery.
Does that help?

Similar Messages

Photoshop Elements 8, How to show hue, value and saturation of a specific area of a pickture?

Hello,
Photoshop Elements 8, How to show hue, value and saturation of a specific area of a picture?
How should I select the area? Which tool?
Thank you in advance, Karl

First make sure your Info Palette is visible : menu Window / Info (shortcut F8)
In this palette, click the small icon 'more'
Choose 'Palette Options'
and choose HSB for the second palette readout.

How to measure an Area in Analysis Photoshop cc-14?

How to measure an Area in Analysis Photoshop cc-14?
PS's online help only mentions to use the Ruler to measure a straight.
The are many of capabilities, but I cannot figure it out.
I have searched all of Photoshop's tutorials, but Help is the best.
All the online tutorials on show the rudiments of Analysis.
Thank you for any info...
Bob

Photoshop Help | Measurement (Photoshop Extended)
In the help there I see
Create a selection area to measure values such as height, width, perimeter, area, and pixel gray values. You can measure one selection or several selections at once.

How to fix "We are unable to start your subscriptions for adobe Photoshop CS5.1 Extended. Subscript

how to fix "We are unable to start your subscriptions for adobe Photoshop CS5.1 Extended. Subscriptions edition" please heelp

Hi migliii,
I found a few solutions mentioned in this discussion thread Adobe photoshop cs5 extended installation error (Mac); Inconsistency in installer database. If you are unable to resolve your problem still, I'd suggest that you contact Customer Support (http://www.adobe.com/aboutadobe/contact.html). Use any of the options on this page to get in touch with a customer support person.
Thanks,
Preran

How can i watch purchased tv shows which are stored on the cloud on my laptop?

how can i watch purchased tv shows which are stored on the cloud on my laptop?

Hi Miriam1972,
Thanks for visiting Apple Support Communities.
You can use iTunes on your laptop to download the tv shows for viewing. See this article for the steps to download the shows:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Best,
Jeremy

How can I show my scanner in Photoshop import menu?

How can I show my scanner in Photoshop import menu?

Does it not appear when you go to Import > Images from Device? Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

How do i get TV Shows that are on my Apple TV 1st gen to download to my computer?

For some reason I cannot figure out TV shows that are appear on the ATV 1st gen do not appear in the download list of iTunes on the computer I am trying to sync with.

If you can see an option to transfer purchased content then it sounds like it's set up properly.
Unfortunately a few people have had problems transferring purchased content and in quite a lot of cases the only solution has been to restore the Apple TV and report a problem through the purchase history to obtain credits for the lost content.
Before giving up though there are a couple of things you might try.
1. Pull ALL the cables from the Apple TV, wait a few moments and try again.
2. Disconnect and reconnect the library. (settings/computer/your library and then settings/computer/connect to iTunes) This will erase all synced content (which whilst time consuming, you will be able to sync back). It won't delete purchased content that hasn't been transferred to iTunes.

How to show custom error message in WebADI Excel template?

Hi,
I've created a custom Web ADI integrator and associated it with a 'Procedure' based custom interface.
WebADI Interface API Returns is set to "Error Message".
I'm using raise_application_error(-20001, "Actual Error Message") for invalid rows,but custom error message from PL/SQL is not populated on the excel template.
Instead it is showing "SQL exception occurred during PL/SQL upload".
Am I missing anything? How to show custom error message from Pl/SQL procedure to WebADI Excel template?
TIA
Narasimha

The custom API errors are visible in the BNE log but not on the Excel.
BNE Log=>
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Exception while uploading to PL/SQL API. Error Code: 20001, Message: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Stack trace: java.sql.SQLException: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:202)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1005)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3550)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4710)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.bne.integrator.upload.BnePLSQLUpload.doUpload(BnePLSQLUpload.java:284)
at oracle.apps.bne.integrator.upload.BneSAXUploader.processDeepestLevel(BneSAXUploader.java:2346)
at oracle.apps.bne.integrator.upload.BneSAXUploader.startElement(BneSAXUploader.java:1182)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:181)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1288)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:234)
at oracle.apps.bne.integrator.upload.BneUploader.processUpload(BneUploader.java:301)
at oracle.apps.bne.integrator.upload.BneAbstractUploader.processUpload(BneAbstractUploader.java:114)
at oracle.apps.bne.integrator.upload.async.BneAsyncUploadThread.run(BneAsyncUploadThread.java:140)
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 WARNING        BneOracleWebAppsContext.getTimeZone CLIENT_TIMEZONE_ID has not been set
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 ERROR          BneOracleWebAppsContext.getExtraJDBCConnection recieved the same connection as the base connection. There may be transaction problems.
How to show the same error in the excel template?
Here is the package:
CREATE OR REPLACE PACKAGE BODY APPS.XXPO_COSTFACTS_WEBADI_PKG
AS
   PROCEDURE upload_data (
                          P_CONTAINER_ID IN VARCHAR2
                        , P_SAIL_DATE IN DATE
                        , P_PO_NO IN VARCHAR2
                         ) IS
    --declare
    lv_err_msg      VARCHAR2(240);
    lf_err_flag     NUMBER := 0;
    ln_temp         NUMBER;
    BEGIN
    --------------------- checking for mandatory parameters---------------------------
      IF (P_CONTAINER_ID IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg||'-'||'Please enter CONTAINER_ID - ';
      END IF;
      -------------Validation for Sail Date Format----------------------
      IF (P_SAIL_DATE IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg || ' ' || 'Enter Sail Date - ';
      ELSE
         BEGIN
            SELECT 1
              INTO ln_temp
              FROM DUAL
             WHERE P_SAIL_DATE = TO_DATE (TO_CHAR (P_SAIL_DATE, 'DD-MON-YYYY'), 'DD-MM-YYYY');
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format';
            WHEN OTHERS THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format'|| SQLERRM;
         END;
      END IF;
      -------------Validation for PO_Number----------------------
      IF (P_PO_NO IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg || ' ' || 'Enter PO_NO - ';
      ELSE
         BEGIN
            SELECT count(1)
              INTO ln_temp
              FROM PO_HEADERS
             WHERE Attribute4 = P_PO_NO;
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' No Oracle PO for Biceps PO#'||P_PO_NO;
            WHEN OTHERS THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Error getting the Oracle PO for Bicpes PO#'||P_PO_NO||' Error-' || SQLERRM;
         END;
      END IF;
     -----------------------Insert Record----------------------------
     IF lv_err_msg is NULL THEN
     BEGIN
         INSERT
          INTO XXP2P_HW_COST_FACTORS_STG
                 CONTAINER_ID
                ,SAIL_DATE
                ,PO_NO
                , ERROR_FLAG
                , ERROR_MSG
               ,CREATED_BY
                ,CREATION_DATE
                ,LAST_UPDATED_BY
                ,LAST_UPDATE_DATE
                ,LAST_UPDATE_LOGIN
            VALUES
                 P_CONTAINER_ID
                ,P_SAIL_DATE
                ,P_PO_NO
                ,lf_err_flag
                ,lv_err_msg
              ,FND_GLOBAL.USER_ID
                , trunc (sysdate)
                ,FND_GLOBAL.USER_ID
                , trunc (sysdate)
                ,FND_GLOBAL.LOGIN_ID
              -- commit;
              DBMS_OUTPUT.put_line
                '-' || 'After ap_invoices_interface'
        EXCEPTION
        WHEN OTHERS THEN
          ROLLBACK;
          lf_err_flag := 1;
          lv_err_msg := lv_err_msg || ' ' || 'error loading CONTAINER_ID-' || P_CONTAINER_ID || SQLERRM;
          raise_application_error(-20001, lv_err_msg);
        END;
    ELSE
          raise_application_error(-20001, lv_err_msg);
    END IF;
END upload_data;
END XXPO_COSTFACTS_WEBADI_PKG;

In competitive exams photo in "true color" format.... How to do it in adobe photoshop please replay it.....

In competitive exams photo in "true color" format.... How to do it in adobe photoshop>>> please replay it.....

Mayuk, you are not making any sense here.
True color (24-bit)
"True Color" redirects here. For images with natural color rendition, see true-color.
http://en.wikipedia.org/wiki/File:Truecolor.png 24 bits (16,777,216 colors, "truecolor")
True color supports 24-bit for three RGB colors. It provides a method of representing and storing graphical-image information (especially in computer processing) in an RGB color space such that a very large number of colors, shades, and hues can be displayed in an image, such as in high-quality photographic images or complex graphics. Usually, true color is defined to mean 256 shades of red, green, and blue, for a total of 224 or 16,777,216 color variations. The human eye can discriminate up to ten million colors.[13]
Color images composed from 3 grayscale images A, B & C assigned to R,G & B in different orders.
"True color" can also refer to an RGB display-mode that does not need a color look-up table (CLUT).
For each pixel, generally one byte is used for each channel while the fourth byte (if present) is being used either as an alpha channel, data, or simply ignored. Byte order is usually either RGB or BGR. Some systems exist with more than 8 bits per channel, and these are often also referred to as true color (for example a 48-bit true-color scanner).
Even with true color, monochromatic images, which are restricted to 256 levels, owing to their single channel, can sometimes still reveal visible banding artifacts.
True color, like other RGB color models, cannot express colors outside of the gamut of its RGB color space (generally sRGB).
Macintosh systems refer to 24-bit color as "millions of colors".
RGBA color space, or 32-bit color, is a variant of true color in which the additional 8-bit is allocated to transparency and indicates how transparent is the element to which the color is assigned, when overlaid on other elements.

How to set up a great Photoshop machine

How to set up a great Photoshop machine
From the blog of John Nack, [former?*] Photoshop Principal Program Manager
At Photoshop World this week, performance testing lead Adam Jerugim
presented a performance guide with hardware recommendations and
information about the CS5 performance preferences. I’ve put his notes
in this post’s extended entry.
http://blogs.adobe.com/jnack/2010/09/how-to-set-up-a-great-photoshop-machine.html#more-271 2
Operating Systems: Mac OS 10.6.4 and Windows 7 64-bit
CPU: Intel Core i7/Xeon or AMD Phenom II/Opteron with 4 cores. More than 4 cores gives diminishing returns.
RAM: Enough to keep Efficiency readout at 100%. If Efficiency is low (<95%), adding RAM will provide biggest benefit. 4GB will cover most digital photography uses. 8GB leaves room for other apps and fits huge documents in RAM.
Video Card: Any modern card with at least 512MB VRAM; 1GB if doing heavy 3D work.
Disk: Use a separate disk for Photoshop scratch. If you spend a lot of time opening / saving large data files, another separate disk for data files will speed that up. Faster disks are better. RAID0 is faster. SSD is faster yet. RAID0 of SSDs is fastest but super expensive. If you have plenty of RAM (meaning your Efficiency readout is 95% or more), separate/faster disks for scratch provide minimal benefit. If Efficiency readout is low, a separate SSD for Photoshop scratch will be a big win. SSD boot volume will speed booting and app launch, but not Photoshop operations.
Memory Usage: this should be no higher than 70% on systems running 32bit Photoshop or with less than 4GB of total physical RAM. On systems with 8GB or more, use 70% if you plan on running other applications at the same time as PS, or higher (up to 90%) if you only plan on using PS on your system.
Efficiency %: can be found in the document window drop-down options. Operations fit in RAM when this 95% or greater.
History & Cache: if you work with small documents with lots of layers, start with the Tall and Thin button (which will set cache levels = 2, tile size = 128K/132K). If you work with large documents with few layers, try the Big and Flat button (which will set cache levels = 6, tile size = 1024K/1028K). Using more history states uses more scratch disk space. More history states may also use more RAM, particularly when running actions or scripts on large documents. If you see Efficiency drop below 95%, especially after running actions, try reducing history states or adding RAM.
Scratch Disks: a separate drive for Photoshop scratch disk will avoid slowdowns from Photoshop and the OS trying to access the disk at the same time. If your Efficiency number often drops below 95%, the gain can be large. Faster disks are better. A RAID0 array is faster, an SSD faster still. If using a RAID or SSD, try setting the Tile Size to 1024K – AMD CPUs prefer 132K / 1028K sizes, but 128K and especially 1024K are more efficient for RAID and SSD use regardless of CPU type.
GPU Settings: you can change GPU settings by clicking on the Advanced Settings button. For more more modern video cards there will be three options: Basic, Normal, Advanced. Changes to this setting will only take effect after PS restart, and would be worth experimenting with if painting performance is sluggish.
Posted by John Nack at 7:10 AM on September 03, 2010
* I understand Mr. Nack may have moved to a different area of Adobe management?
Wo Tai Lao Le
我太老了

Nice of you to point it out here as I at least don’t follow Mr.Nash’s blog regularly.

How to edit a PDF in Photoshop CS4

Hi there,
I'm having some real trouble trying to figure out how to edit a PDF in photoshop cs4. So i need to edit/change text, move things around, that type of thing.
I work in Windows.
Could someone give me a bit a low down on how this is done?
Much appreciated,
Victoria

You can open them but you will totally rasterize everything.
PDFs are not intended to be edited. They are a final format but as
mentioned you can use Acrobat for some minor text edits or use it to
extract the images to Photoshop for further editing.
Bob

How to show "ALL" Values by default in Page Drop-Down Lists in Pivot Tables

Hi Everyone,
Iam stuck with 1 problem please can any 1 help me if u know the solution.
Here is my problem:
How to show "ALL" Values by default in Page Drop-Down Lists in Oracle BI Pivot Tables?
For example, if you place Region in the pages area, a Region drop-down list allows the user to select a particular region, and see the data for only that region, rather than seeing all the Regions,But by default its not showing "ALL" option in the drop down list ,rather than doing that its showing result for only 1 region by default.
And an other problem with this pages area is, if we palce the multiple attributes in the Pages area in the pivot table, the (Fields)result is showing in vertically, the attributes 1 by 1(Every attribute in a new line) ,rather than showing like that, is there any way to show the results in horizantally?(We want to have it as a seperate drop drown list for every field horizantally not as a concatenated list).

Thanks Nikhil. But I am fetching the values from the LOVCache.java.
I am using <af:selectManyChoice>. Is there any way I can use LOVCache.java value for selecting default values instead of hard coding?
I mean to say can I write
unselectedLabel="#{LOVCache.entityTypeSelectionList.anyValue}"
where LOVCache.entityTypeSelectionList is used to populate the drop down box.
Regards,
Aseet

How to show all view tab (Main Report and all Sub Report) in Visual FoxPro 9

I use ActiveX from Crystal Report Developer XI for viewer in Visual FoxPro 9 and I already know how to show Main Report by using command:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the MyReport.rpt there is two subreport name :
1. MySubReport1
2. MySubReport2
My Question is :
How to show all view tab (Main Report and all Sub Report) at the 1st time we call ViewReport?
I try to using command :
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub=oRptOpen.OpenSubreport("MySubReport1")
oRptSub=oRptOpen.OpenSubreport("MySubReport2")
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
but only show Main Report (view tab name : Preview)?
Did I miss any command before I call oRptView.ViewReport?

Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a>

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off). Have you previously been saving PSD files?
IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on. The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list. So long as the file does not have parameters that your chosen format does not support, then this should work for you.
[EDIT] Just noticed that you did include 'Crop' in the subject line. Do you have 'Delete cropped pixels' checked?

How to show deductions in ap invoice

Hi all,
how to show deductions in ap invoice
Scenario is:
We raise A/p Invoice for services provided by vendor,
ex:When the bill amount as 1000.00.
Invoice will be raised for 800.00, and paid, but
Remaining 200.00 will be deducted from the bill as Redemtion deposit (100.00), work control tax(100.00)
and this will be paid to vendor after certain period of time.
We want to show the above scenario in A/P invoice.
any idea how to work on the issue.
regards,
Kumar

Hi Kumar,
This scenerio can be handled by making use of the Freight Screen, In freight create the Freight Items, Redemption Deposit and WCT. Map the respective GL accounts in the AP Column in Freight Window. When you are creating the invoice u can enter the respective amounts in the Freight window with a negative sign.
This should solve your issue.
Regards,
Reno

How to show overexposed areas in Photoshop?

Similar Messages

Maybe you are looking for