How to show purchasing group members in the item data of the shopping cart?

Dear Experts,
for s shopping cart in SRM 7.0 CS, i have the following business requirement:
In the item data tab of the line item details, the drop down field for Purchasing group is there. Right to this field, there is also a link called "Show members".
If i go on this link, than a small table opens that obviously is there to contain such additional information about the purchasers like name, telephone nummber or extension.
Currently, this small table does not contain any of this additional information for any of the used purchasing groups.
Can you please help me understand, how and where i can maintain this information in the sytem, so it shows in the shopping cart?
Thank you very much for your help.

Hi,
thank you very much for the answer.
Actually, the question is not how to create the organizational unit of purchasing group in the PPOMA. This is all done. I just would like to understand, whether there is somewhere a place where i can maintain the name and maybe also the phone number of the buyer himself.
Thus, i would hope to see these details (i.e. the name and the phone number) in that small table that opens up if i click on the "Show members" link that is situated right to the purchasing group field in the "Item data" tab of the details of the line item.
Thank you.

Similar Messages

Show Purchasing group Field in UI for Create Limit Item

Hello All,
Do you if there is a way without modifying the templates to show Purchasing Group in UI for Create Limit Items in SRM 4.0 ( Classic Scenario)?
-thanks in advance
Shilpa

Hi
Yes. Without modifying the HTML Templates of the Internet Service - BBPSC01,
This is possible by adding a custom field at the Shopping cart item level in the structure. There is no such limitation on the number of customer fields added.
Refer to the following SAP OSS notes
Note 458591 - User-defined fields: Preparation and use
Note 672960 - User-defined fields 2
Refer this link for details ->
Add custom field in SC -Item Level
Which SRM version are you using ? What's your Business requirement ?
Incase you want to transfer some data from catalog to Shopping cart.. you can get this done by using BADI.
Try BBP_DOC_CHANGE_BADI
BBP_DOC_CHECK_BADI
using SE18 Transaction.
Do let me know.
Regards
- Atul

How to create Purchase group

Hai Guys,
What is the procedure to create my own Purchase group?
Kindly let me know the Steps..
Regards
Jino.

Hi,
You need to perform the following steps
Goto SPRO > Material management > Purchasing > Create purchasing group
Here you'll be able to enter the name, desciption, phone no., fax and e-mail Id of the purchasing group.
If you need to maintain the printer settings for the purchasing group please follow the below path
Goto SPRO > Material management > Purchasing > Messages > Assign output devices for the purchasing groups.
You'll have to maintain this in the development client and get it transported to production.
Hope this clarifies this issue.

How you create a group to send many txt msg at the same time?

How you create a group to send many txt msg at the same time?

The iPhone does not support groups for messaging. There are apps in the app store which purport to be able to do this.

How to show the Current Date in the Screen as default

Hi all,
This is may be simple to u all, but i need the solution for this,
I want to show the Current date in the Screen, i am using the structure. but the calendar control showing when i run the program. But i want to show the current date as default.
Thanks
Shankar

Is this a screen or a report?
If its a report, try assigning DEFAULT sy-datum (to the parameter/select-option name)
If its a screen field, try writing this in the PBO:
IF fieldname IS INITIAL.
fieldname = sy-datum.
ENDIF.
Hope this helps.
Sudha

How Do I - Display a group when there is no data for the group?

I have a report where I'm grouping on a numeric county number. Currently, if there are no records for that county, that report group doesn't display. My users want each county printed even if it has no data.
The numeric values for county range from 1 - 85. I'm using CR 11.5 and pulling data from a Teradata database.

Hi. I had already thought of doing an outer join on the county column of the county look up table. The problem is that this transfers the selecting and counting of the targeted data from the SQL statement to the report, specifically most of the formula fields itself. And given that the report is parameter driven, it would make maintenance of the report not so much fun. The solution ( I think, still have to code it) is to take my original inner join query and UNION it to a query selecting only the county column from the county look up table. I just add null valued columns to match the number of columns in the original query. This way I get at least one county record to satisfy the display of each group and only minimally increase the actual number of records the report has to process.

Issue with the Posting Date of the Purchase Order.

Hi All,
There are fields in BW like SSL1: Time OK, SSL2: Qty OK, SSL3: Time & Qty Ok, SSL4: Days Late (Routines are written to calculate). These fields will indicate whether the delivery against a GR is OK or not with respect to Time, Quantity and the No. of Days..
But here the issue I am facing is
If there is only1 delivery/ GR against a single item the calculation in BW are correct - i.e. for a particular PO if there is only one delivery the above fields like SSL1: Time Ok, SSL2: Qty OK will show like the delivery is done within the specified time and everything is OK (in case if it is delivered within the allotted time)
But if there are multiple deliveries or multiple GR's posted for one PO item, the calculations are going wrong i.e. even if the delivery is done well within the specified time it is showing the wrong calculations like it is delievered too late. Because in this case the earlier dates are overwritten.
Can anyone throw me some light on how can I go about solving this issue.
I am thinking of declaring the Posting Date as the KeyField of the DSO as of now it is a Data field I also want to know the impact of assigning this as a Keyfield.
Thanks in advance,
Prasapbi

Hi,
As I understand, you have a DSO based on Purchase Order and your key field is PO and its line item. The problem as you stated will always be there if you have multiple deliveries/GRs created for a single line item because the system will overwrite the entries for same key.
Problem with adding Posting date as keyfield will be that then your key will be PO-PO Lineitem-Date. When PO will be created, the Posting date will be blank(correct me here if I am wrong), therefore you will have one entry for same PO-line item combination. One without date and other with date, which again would be incorrect. If my assumption about Posting date was wrong, even then your data may not be correct because then you may have many entries with same posting date which again would overwrite each other.
If there is any direct link between PO line item and number of deliveries that will get created for them, then you can bring that field in DSO as keyfield. But I don't think there is any such field.
Looking at your report requirement, I would suggest that you make a DSO based on Goods Receipts and then calculate these keyfigures by comparing the dates between GR posting date and PO line item date.
Else you can change the way your datasource works(if its generic one based on function module). Since your main requirement is to check whether the GR posting date has met your SLA or not, you should fetch all the details only when GR is created and make your key field as PO-PO Line item-GR

Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?

Hi, Im not a frequent forum poster, as most of my questions can be found already answered on them!
This is a question Ive had for a long time and it amazes me that no-one else seems to ask it. I check at each OS upgrade but its never there...
Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?
I was able to do this years ago in MS Outlook, and utilized it all the time when I needed to push things back, now I have to open the event and select an new date in the drop-down calendar for each & every event I want to move to a new month at the end of the month.
If its definitely not possible, how to you ask apple to consider including it - it doesnt seem like a particularly difficult task.
Thankyou
Andrew.

Andrew,
Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?
No, but you can use cut/paste. Cut (⌘X) the event, then click on the week where you want to move the event, and Paste (⌘V).
If you have a suggestion for Apple to change that method use: Apple - Mac OS X - Feedback.

HT204150 i have deleted all contacts in icloud but still have them on my iphone (which is backed up as well to iTunes) how can i restore the iphone data to the iCloud so it will resend it to my mac book and iPad?

i have deleted all contacts in icloud but still have them on my iphone (which is backed up as well to iTunes) how can i restore the iphone data to the iCloud so it will resend it to my mac book and iPad? I have switched my iphone to airplane mode so it is not connected to the internet and so icloud can not wipe it at the moment.
thanks roy

There's a menu choice (I think under "Files") that lets you sync purchased items on a device back to itunes. Look for that.
iCloud does not store music. If you want to do that you'd have to subscribe to itunes Match, but to get music to the match servers, you need the music in the itunes library on your computer.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

How to obtain the row data in the component datatable?

if I want to edit a row data, and then know which row is edited in the component datatable, and how to do?
How to obtain the row data in the component datatable, and update it to database, not simplely edit a simple table
Any ideas? Thanks

Thank you very much for your help Alexander !
It's quite confusing when you leave Struts and try to adapt your projects for JSF for the first time...
I wanted to click on a row with a "onMouseClick" on the TR tag like I used to do in Struts/JSTL. But it seems to be impossible in a dataTable.
Ok then. I've added a column at the end of the row with an icon.
But eventually I didn't need to declare link parameters.
In my BackingBean I did like this :
public String selectEventForUpdate() throws IllegalAccessException, InvocationTargetException {
        PortletAgenda event = (PortletAgenda) JSFUtils.getInRequestMap("event");
        BeanUtils.copyProperties(this, event);
        return null;
   }JSFUtils.getInRequestMap(...) is a method I wrote in a util object :
public static Object getInRequestMap(String name) {
        Object res = null;
        Map requestMap=FacesContext.getCurrentInstance().getExternalContext().getRequestMap();
        if (requestMap!=null) {
            res=requestMap.get(name);
        return res;
} " event " is the name of the item in my dataTable list.
My backingBean has the same attributes as "event".
So when the page is reloaded I have a backingBean full with the selected properties to edit/update.
Thanks to your reply I realized that putting this form in the middle of the dataTable seems to be impossible.
So I put this form in a floating DIV in front of the table with a shadow.
It works :o) !
But I'm a little bit disapointed to be honest...
I used to build my web applications with Struts and JSTL and doing this kind of interface was really easy.
I've decided 3 days ago to convert into JSF because the "GUI Layer" seemed to be improved.
But now I realize that I cannot put a onMouseOver and onMouseClick on a row and I cannot display a different row in the middle of a table....
I think it's a shame because there is a facet for header and footer.
And it would be great if we could create our own personal facet that appears only if a condition is true.
For exemple " if the current item id is the same as the request parameter id then display the following facet content ....... (with a panel group and a form inside to update the row) "
It's easy to do that with JSTL thanks to c:forEach and c:if but it seems to be impossible to use JSTL tags like this during the dataTable iteration.
And JSF tags seems to have no logical tags like " if " or loops that can be nested in dataTable.
I really need to realize this interface (you click on a row then an edit form appears where you clicked).
Do I have to write a component myself that extends dataTable?
Do you know if writing such a component is hard to do for a beginner like me?
(I've juste discovered JSF 3 days ago and I've used Struts/JSTL for 2 years til now)
I'd be glad to have much advices from you about that.
Regards

Purchasing Group in equipment BOM ( Item level)

At the time of creating equipment BOM , purchasing group in equipment BOM (item level ) will be in sync with material master purchasing data.
When we change purchasing data (Purchasing group) in material master at that time system will not change purchasing group in old equipment BOM's at item level. Is there any standard method to maintain purchasing group in old equipment BOM in sync with purchasing group in material master data (System ECC 6.0 ehp5)
Thanks and Regards,
Pankaj

Thanks for reply Peter ,
Because of this issue wrong information is flowing to PR (when component selected from equipment BOM in work order).
Is there any negative impact if I will remove purchasing group at BOM item level ?
I did analysis for this and found no negative impact on PR , still looking for expert advice as client is not looking for any core modification.
Thanks and Regards,
Pankaj

How to take the print out of the entire data from the waveform chart

i am using cont acq to spreadsheet file.vi to acquire data from a number of channels. this vi also plots the acquired data on the waveform chart. i want to take the print out of the entire data. how can i do it ?
also how can i take print out of the data between given interval??
please reply me
thank you

There are a number of different ways of achieving your goal. Depending on which version of LabVIEW you have and which development environment, the Report Generation Toolkit is a very powerful tool. Attached is an example that prints the acquired data without the use of additional toolkits.
Jonathan Hildyard
Applications Engineer
National Instruments
Attachments:
DAQ_with_Print.llb ‏115 KB

Some calendars in iCal appear corrupted but OK on iPhone. If I sync will the calendar data on the phone restore info on the desktop iCal? any other ideas for how to sort this please?

Some calendars in iCal appear corrupted (ie have red exclamation mark by them) but are still OK on iPhone. If I sync, will the calendar data on the phone restore info on the desktop iCal or will I lose that as well? Or could I back up the calendars on my iPhone somewhere and then import them into iCal? any other ideas for how to sort this please? it's driving me mad. thanks.

I don't think there will be a solution to this. Exchange 2003 just isn't supported.

How to load the existing data from the databse in the CMP entity bean?

hello
my problem is as follows--
i am creating a CMP entity bean.in these beans client create the data instances using create() function.
now a entity bean will be created for the newly created data and it's EJBObject will also be formed.
now we will be able to perform finder methods over them.
remember these data has been newly created in the database.
but now if i want to perform the finder methods on the
existing data in the database( i don't need to use create() fn as i am not "creating" the data.). how will i perform the query over the existing data.
basically i have to make a CMP bean to extract the data corresponding to a particular condition , from the database table. i don't want to create the data in the database but just find out what data satisfies my condition.
thanking you
Prashant

you have to use findByXXX methods. depending on your appserver you may have to declare them (and eventually the query you want to be used) in the vendor specific deploiement descriptor.
(e.g. using jboss i don't remember having explicitly declare the findBySomeField method - where someField is a persistent field - in the dd, whereas with bas all finder methods have to be explicitly declared)
[note that obviously these methods have to be present in your home interface]

How to show purchasing group members in the item data of the shopping cart?

Similar Messages

Maybe you are looking for