How to show Summary label it in the first column of the sheet?

Hi Gurus,
I am wondering if i could show the Label of summary items in the first column instead of showing it along with the Summary data. As with the long worksheets if the summary column is at far right it doesn't look good and not readable too.
Thanks.

Thanks NP,
Its really not good in Discoverer. Actually what I'm saying is as follows:
EMPID EMPNAME SALARY
emp01 EMPNMaa 100000
emp02 EMPNMbb 500000
emp03 EMPNMcc 1000000
Sum:------------------- 1600000
But what Discoverer does right now is:
EMPID EMPNAME SALARY
emp01 EMPNMaa 100000
emp02 EMPNMbb 500000
emp03 EMPNMcc 1000000
--------------------------- Sum:1600000
It really looks bad & not al all a user friendly. The sum label comes always with value. I think Oracle should improve it.
Thanks.

Similar Messages

How do I increase the width of the first column in the Terminal ls -l command?

I am now running 10.9.x, but I've experienced the problem described in the question over the last several iterations of OS X.
I use bash as my interactive shell. When I display the "ls -l" command in Terminal the output is often very difficult for me to scan, because the columns in which are displayed the several fields of the records for the listed files are misaligned (different left-hand first-letter starting points for left-aligned text-valued fields; different right-hand low-digit alignment of numerical fields).
When I look more closely at the mess displayed in my Terminal window, it appears that the cause of the problem may be that no minimum width, or an inadequate minimum width, has somewhere been set or defined for the first column of each record, containing the file's "mode" string (permissions, etc.); for all records in which this string is of equal length, the succeeding columns for all fields in those records are themselves aligned.
It has not always been thus for me in the Terminal with OS X, or else I might not dream that the world could be a better place in this one respect. But if I launch an interactive csh-shell instead of bash in Mavericks today, the columns of the ls -l command there align no better.
I've found no help in the Unix man pages for the ls command. There is a COLUMNS environment variable whose value is supposed to be used by the ls command to set the width of every column displayed, but this is not what I want to do, and in my shell "ls -l" seems to ignore the exported variable anyway.
There is also an LS_COLWIDTHS environment variable that is described as setting column widths on a field-by-field basis, at least for some fields, but the the mode column is not included among those whose width is supposed to be adjustable, and my shell seems to ignore the value of this variable as well.
I've looked in my rather simple ~/.profile and ~/.bashrc files for anything that I might plausibly suspect of producing or perpetuating this behavior, but there is nothing there. Any suggestions about how to remedy this problem?
Randy Miller

John,
I would like you to perform a safe boot. On reboot, press and hold the shift key at the chime, until the grey horizontal bar appears. After you type in your password, press and hold the shift key again, then click the right arrow to login, and release the shift key when your desktop appears. Move the contents of your local ~/Library/Caches into the Trash. Reboot normally. Empty your Trash.
Re-evaluate your Terminal behavior. If it now works ok, great. Otherwise, here are a sequence of screen shots of my Terminal preferences for comparison. I can use both Courier fonts without formatting issues. Click to enlarge. I use the free IR Black Terminal theme as a personal choice in OS X 10.9.4. In my ~/.bashrc file (triggered from ~/.bash_profile), I export TERM=xterm-256color, and invoke /usr/bin/tput init. Click on the following images to enlarge.

Emacs is displaying the first column of the line on the last column of the previous line

The first column of my lines are being displayed on the last column of the previous line. This a very irritating glitch that I have no clue how to fix or even troubleshoot. (red bars were added using preview to hide personal info)
I've downloaded MacPorts and reinstalled emacs:
GNU Emacs 24.4.1
Copyright (C) 2014 Free Software Foundation, Inc.
GNU Emacs comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of Emacs
under the terms of the GNU General Public License.
For more information about these matters, see the file named COPYING.
I'm open to any suggestions on how to fix this graphical glitch.
Much thanks
Message was edited by: Conner_36

Given that the Emacs for OS X works ok and the Emacs shipped with OS X works it would seem to be some issue with MacPorts and their version.
Totally unfamiliar with MacPorts so have no idea how the program gets compiled,what libraries it is using and what if any config settings are needs or set so I'm afraid I won;t be much help there. That you are on a MBP with a retina display may be part of the problem.
So with the setup you have now, hardware and software including OS, it was working and then just like that it stopped? Something much have changed around the time it stop working if you can think back to then it might help you resolve the problem.
As you are doing programming can i assume you have Xcode and the command line tools installed? If not how do you compile your code? The reason I ask is compiling Emacs from there GNU source is not all that difficult. It might be worth trying that.
One last thing given that the two other versions of Emacs displayed the file OK this strongly suggests the problem is not in your .emacs file or your environment however as I wrote I am not familiar with MacPorts so it is possible there is another config file messing you up. As a test for this create a new user or log in as the Guest user (this is best as you;re guaranteed the environment is clean) and look at the file in question in MacPorts Emacs. If it displays OK then there is something in your environment causing this, If it messes up even in the new user then I'd say ditch MacPorts..
regards
<edit>
Just to rule out init files if you start emacs with the -q(minus que) flag the .emacs file is not read in, if you use --no-site-file it will not load the site file if it exists.
I'd try running the MacPorts emacs with those two flags to see f anything changes.

How do you scroll up and down on the library and playlists? I can only see an up arrow at the top of the first column on the left and it only switches between the top 28 songs and the bottom 28.

How do I scroll up and down playlists and library on the new iTunes format.? When I ckick on the arrow in the box at the top of the far left column it only switches between the top and bottom 28 songs.

Hi
I looked at the specs for your laptop and there is no HDMI out port for this model but RGB & Headphones out jack should work. Here is the link for closeup views of the ports.
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L555D-S7005&rpn=PSL...
Click on product tour.
Qosmio X505-890=i7-740QM-6GB DDR3-64 GB SSD-500 GB SATA-
BR-Rom-DVD Burner-HD 18"Display-GTS360M-1GB-GDDR5
HP 17 Envy 3wks Returned
DIY Desktop Builds

How do you print the numbers next to the first column

In Numbers I can't figure out how to print the numbers next to the first column to the left. Say I have 350 people on a list and I want to print the sheet with the numbers next to the people's name, how do I do that. Excel automatically does it. However, I cannot find the option to print and include the numbers from the standard Numbers worksheet. Thanks for your assistance.

In excel it is actually in the page setup dialog. under the "sheet" tab. Numbers doesn't have one table per page (excel is basically one large table of cells). So printing header and column labels doesn't really work in numbers, because those labels don't show up until you click inside the tables. If you notice when you do that they abstruct the view of everything else that might be near the edge of the table.
The other posters response is the best way to do it. you can get column Numbers (but not letters) by using the column command in an extra row at top also. Thre is a way if you really want column letters, but it ain't pretty. Let us know if you want that too.
Jason

Making JTable columns 2- n scrollable, not the first column, how?

Id like for my JTable's first column to always be visible, and columns 2->n to be scrollable. The table also follows the sortable table model found from the swing examples...so if the user sorts any of the columns, all the other columns should sort accordingly.
is there anyway i can separate the first column with the others, so that i can put them in their own scrollpanes (first column just scrolls up/down, and 2->n can scroll either way)?

I only glanced at the example at the posted link... if memory servers, the trick was to create one JTable but with two different TableModels. To link the two models, you can simply make the getValueAt method in the fixed model call the getValueAt method of the non-fixed model. It's a bit tricky for beginner, but doable.
;o)
V.V.

Locking the first column in advanced data grid on horizontal scrolling

Hi All,
My requirement is to freeze or lock the first column in the advanceddatagrid from scrolling on horizontal scroll event.
The column should always remain in the left hand side of the grid.
I tried with lockedColumnCount property of the advanced grid. But it is not working.
Could anyone help me please with code examples

I am able to do the above by using the method which passes
the sort information to data provider. But now the problem I am
facing is I cannot use event.preventDefault(); along with that
method. If I use event.preventDefault(); then it does not show the
descending arrow on the column, nor does it sort on multiple
columns.
But if I do not use event.preventDefault(); then the problem
I am getting is it remembers the previous sort order for a
particular column. eg. If I sorted on col A (desc)+colB and now I
sort on colC. Again if I click on col A, the data provider sorts on
colA ascending shows it and then the grid refreshes sorting on col
A but in descending order.
Does somebody know how to get around this problem?

Separate first column from the others

Hi,
how can I separate the first column from the others in a way that it does not scroll out of the active window? I.o.w., I want column B, C, D.... to slip "under" A.
I got a "Names" list (column A), and in the following columns lots of stuff, and when I scroll to the right / to the last column, the Names are out of the window.
Thanks a lot!
Peter

Hi Peter,
That was I that provided that answer. Freeze Rows, Freeze Columns doesn't break a column or row from the table it allows the remaining rows or columns to scroll under it.
Here's the trick, the spreadsheet grid must be longer or higher than the boarder of Numbers program. In other words you cannot see the lower right or upper right of the far end of the spreadsheet. It's past the boarder. Then when you scroll it will slide right. Make the Grid out to column Y. Now make the program smaller in size. Now lock a column then as you move from cell to a cell farther right the columns will scroll left until you come to the end of the grid—in this example column Y.
Truly I hope that makes sense for you. I reread it, it confused me. It takes a few seconds to visually show it but, longer to explain. Think of tying a tie, bam it's tied now walk someone through tying it.
Cordially,
RicD

System only loading the first column from csv

Trying to load data from Excel saved as csv, but the preview and PSA shows data loaded only for the first column from the csv file. All other columns are not loaded from the csv. Changed the lengths of the fields from the datasource to match the ones in the csv to 8, but it only seems to load the first column. What could be the cause?

Hi
Check the file format once and general tab in Data source(make sour you selected comma separated file and symbol)
check below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ed2fe3811a77e10000000a422035/frameset.htm
Regards,
Venkatesh

All the data getting exported in the first column of csv while exporting

Hi All,
In 11.5.10.2, I have a page with advanced table region. Am using OA Framework's export button to export the results.
But, problem is, All the results are getting exported in the first column of the output .csv file. Why such a behavior?
Profile Option of 'Export MIME Type' value is text/text-separted-values.
Any ideas would be of timely help. Thanks.
Regards, Soorya

From OAF standpoint, it just exports the data. Data interpretation is completely dependent on client machine and excel setups.
Please check the Data-->Text to Columns wizard where we can specify the delimiter(s) on excel.
Not sure if this can be set up in Apps, so that we need not change on every end-user machine.
Hope this helps.
-- Thanks

How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers? Until very recently it did so. Contacts on my macbook pro does show up this way. I do have a mobile me account an

How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers? Until very recently
it did so. Contacts on my macbook pro does show up this way. I do have a mobile me account and in the past syncing was no problem. What setting has changed?

The phone number format as well as the date language and format and the time format are controlled by the Region Format setting. Go to Settings > General >International > Region Format. When you change a region format, you can go back one page (to International) and see an example of the date/time/phone number format that your selected region format will produce.

How can i show the first item in the list as selected item

Aslam o Alikum (Hi)
Dear All
How can i show the first item in the list as selected item when user click on the list. Right now when user click the list the list shows the last item in the list as selected or highlighted. Furthermore if the list item have large no of value and a scroll bar along with it then the list scroll to last item when user click it with mouse. I want that when user click the list item with mouse list should show the first item as highlighted.
Take Care
Allah Hafiz

Hi!
You can set list "initial value" using When-Create-Record trigger.
I.g.
:<Block_name>.<list_item_name> := Get_List_Element_Value('<Block_name>.<list_item_name>', 1);

I deleted a specific website from the "History" and used "forget this site" but it still shows up when I type the first letter of the site. How do I delete it?

I am not computer savvy. I don't want to clear all my history, just one specific site. I deleted it, its cookies, passwords and everything and when I type the first letter of the website in, it shows up as one of the options for websites. I need to delete it, but how?

Maybe these will help?
*http://kb.mozillazine.org/Deleting_autocomplete_entries
*[[Remove websites from the Awesome Bar suggestions]]
It's possible the website is in your bookmarks and when you type in some letters in the Location Bar that match that bookmark, it is coming up from there. See [[Search your bookmarks, history and tabs with the Awesome Bar]] for details on changing your Location Bar settings in your [[Options Window - Privacy panel|privacy settings]].

WPF: How to make the first column does not show row separator and Left column separator in DataGrid?

Our WPF application uses DataGrid.
One of request is that first column of DataGrid does not show row separator and also does not show Left column separator. So it looks like the first column does not belong to the DataGrid. However, when select a row, the cell of first column still get selected.
How do we make it? Thx!
JaneC

Hi Magnus,
Thanks for replying our question and provide your solution!
Your solution works by setting "HorizontalGridLinesBrush" and "VerticalGridLinesBrush" to {x:Null} in the DataGrid style and modify "CellStyle" in first column as following:
<DataGridTextColumn MinWidth="32"
Binding="{Binding CellName}"
CanUserReorder="False"
CanUserSort="False"
Header="Cell}"
IsReadOnly="true" >
<DataGridTextColumn.CellStyle>
<Style TargetType="DataGridCell">
<Setter Property="IsEnabled" Value="False"></Setter>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type DataGridCell}">
<Border BorderThickness="0" BorderBrush="{x:Null}"
Background="{Binding Background, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}" Margin="-1">
<Grid Background="{TemplateBinding Background}" VerticalAlignment="Center" Height="42">
<ContentPresenter VerticalAlignment="Center"/>
</Grid>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</DataGridTextColumn.CellStyle>
</DataGridTextColumn>
We found another way to achieve it by using DataGridRowHeader. The good way to use DataGridRowHeader is that we do not need to make the first column ReadOnly (click on first column does not select whole row anymore). Select RowHeader in a row will select
whole row. Move scroll bar horizontally, the row header still keep in visible area.
<Style TargetType="{x:Type DataGridRowHeader}" x:Key="dataGridRowHeaderStyle">
<Setter Property="VerticalContentAlignment" Value="Center" />
<Setter Property="HorizontalAlignment" Value="Center" />
<Setter Property="Height" Value="42" />
<Setter Property="SeparatorBrush" Value="{x:Null}" />
<Setter Property="FontSize" Value="16" />
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type DataGridRowHeader}">
<Grid>
<Border x:Name="rowHeaderBorder"
BorderThickness="0"
Padding="3,0,3,0"
Background="{Binding Background, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}"
BorderBrush="{x:Null}">
<ContentPresenter HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}"
VerticalAlignment="{TemplateBinding VerticalContentAlignment}"
SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}" />
</Border>
</Grid>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
<DataGrid>
<DataGrid.RowHeaderStyle>
<Style TargetType="DataGridRowHeader" BasedOn="{StaticResource dataGridRowHeaderStyle}">
<Setter Property="Content" Value="{Binding CellName}" />
<Setter Property="Width" Value="35"/>
</Style>
</DataGrid.RowHeaderStyle>
</<DataGrid>
JaneC

HOW DO I ACHIEVE A TIME STAMP, IN THE FIRST COLUMN OF MY SPREADSHEET IN EXCEL,SHOWING THE TIME INTERVAL, INCREASED BY THE SCAN RATE ?

FROM AI START VI TO FORMAT AND APPEND VI TO CONCATENATE STRINGS,SECOND INPUT IS TAB,THEN EVEY OTHER ONE IS TAB. THIRD AND FIFTH INPUT IS ATTACHED TO GET DATE/ TIME VI, THEN END OF LINE, THEN CHANNEL 0; TAB; CHANNEL 1;TAB, AND SO ON THROUGH CHANNEL 7. THEN THE LAST INPUT IS END OF LINE. ON THE SPREADSHEET I RECIEVE THE SCAN RATE, THEN THE DATE ,THEN THE TIME; ALL ON THE FIRST ROW. THE NEXT ROW HAS THE COLUMN LABLES, AND DATA GOES TO THE CORRECT COLUMN. BUT NO TIME STAMP COLUMN. I WOULD LIKE IT TO BE IN COLUMN "A" EVEN WITH THE FIRST ROW OF DATA. EX." 10:01:01 200 300 400
10:01:03 200 300 400
THANK YOU
FOR YOUR HELP, JOE BOB CRAIN

I think the best way is to generate an array of time values to send to your spreadsheet BEFORE channel 0 data.
To generate the array you can use Ramp Pattern.vi from 0 to 'Actual Scan Rate' (from AI Start) * number of scans performed.
That way in your spreadsheet you will have the first line same as now, next the columns with time(secs), channel 0, channel 1... channel 7.
If you need the time column with date and time string, you can use Get Date/Time in Seconds.vi when you begin acquisition, then sum the seconds obtained to the array calculated as above and next use Format Date/Time String.vi to obtain the time stamp you need, next build array of time stamps and sent to your spreadsheet.
Hope this helps
Roberto
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to show Summary label it in the first column of the sheet?

Similar Messages

Maybe you are looking for