How to shrink the webpage into JEditorPane

JEditorPane is used to display webpage here.
and scrollbars are added to the panel. so the webpage can be displayed in its original size..
here is the code:
JEditorPane webPage = new JEditorPane();
webPage.setEditable(false);
JScrollPane webPageScroll=new JScrollPane(webPage);
webPageScroll.setBorder(BorderFactory.createLineBorder(Color.black));
htmlPanel.add(webPageScroll);
*******but now I want to shrink the webpage to the size of the JEditorPane, instead of using scrollbars.
What should I do then,,
any ideas are appreciated..
thanks a lot.:)

Is the point to have a full-sized (too big) JEditorPane and a scaled down screen shot of it at the same time?
If you put the JEditorPane actually into your GUI in some panel in some frame, then it's going to be set to the appropriate size for that component. If you don't put it in anything, probably if you put it in a JScrollPane, then the size should become the maximum value to display the page. At that time, you can get the size or preferredsize of the pane and do the paint onto the image thing to get a scaled copy.
(Unless it's smart enough to know that it's in a scroll pane and not paint itself outside the visible viewport bounds.)

Similar Messages

  • How to populate the data into the newly added infoobjects?

    Hi,
    how to populate the data into the newly added infoobjects?
    Thanx in advance,
    Ravi.

    hi ravi,
      here is one example how to enhance.
    Goto RSA6- select the 0Material.- Click on Enhance extract structure-> it will take u to the next screen there u need to create the field material group1. and append it to 0Material.
    Goback to RSA6-- RC on 0material-- it will take you to customer version edit screen- here unchk the Hide and Field only known in exit options n save it.
    Next Go back to RSA6-- 0material- click on Function enhancement it will take you to CMOD Screen( here we need to enter the project name and click create if not created on click display)
    In the next screen we find the function exits Like EXIT_SAPLRSAP_001 FOR T DATA AND EXIT_SAPLRSAP_002 FRO Master Data,_003 for Text n _004 for Hierarchies.
    select the appropriate function exit and double clikc on it. It will take you to Function builder screen.
    D Click on defn of Include ZXRSAU01. it will take you to abap editor screen.
    here u need to include the code for the enhanced fields n also write the code to populate the dat for that particular field.
    save it and avtivate the code.
    Hope this Is helpz,
    partha

  • How to import the IDOC into Seeburger BIC mapping designer

    Hi All,
    Can u please tell me how to import the IDOC into Seeburger BIC mapping desginer.
    I have scenario My scenario is SAP GTS 7.0.....>Seeburger BIS.....>Atlas customs system for Germany
    Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send
    to Atlas systeam.
    Regards,
    Ramesh.

    Hi Ramesh
    BIC is a tool from Seeburger to transmit the XML data to EDI and EDI to XML.
    Seeburger mapping programs for transferring the XML data to EDI data and EDI data to XML data, but not for the structure changing, in the IR your mapping program is same.
    Receiver side you need AS2 Adapter for converting data to EDI target structure. we have many EDI versions are available, for converting the EDI to XML or vice versa AS2 gives some default mapping programs, xml to EDI or EDI to XML convertion done through this mapping programs.
    Seeburger AS adapter provider provides some mapping programs(for example EDI4010 version or other), if you are using the same EDI version(4010) then you can use that mapping programs, if the version is different then we can manually generate the Seeburger X2E and E2X mappings for the corresponding version and signal(850 or 810 or ..), for this seeburger provides the mapping designer tool (BIC), there we can develope the X2E and E2X mapping programs and configure this in the Seeburger work bench.
    Regards
    Ramesh

  • How to undo the "Paste into" in Indesign?

    Does anyone know how to undo the "Paste into" in Indesign? I have used the "paste into" to mask a list of items but now i want to redo it so that I can see the whole list of items again. Is it possible?
    thanks!

    Same way you undo anything else, Edit > Undo, or are you asking if you can come back days later and remove the content, then put it elsewhere? Sounds like maybe the latter, and my guess is you pasted a text frame into another frame, so you need to select the outer frame, then Object > Select > Content, or just use the Direct Select tool to select the content, then cut and finally paste it someplace else.

  • How to divide the iview into frames?

    Hi Experts,
                  Please tell me how to divide the iview into frames.Kindly provide the   steps.Its urgent.
    Regards,
    Nutan

    Hi Nutan,
    Now its clear!!
    If I understand right. You want an overview page full of links to go to your different pages?
    Or maybe you want a link form each page to go to another page?
    In Portal Navigation through hyperlinks is possible.
    You can either do that using EPCM.doNavigate("ROLES://...") {check for EPCM API of help.spa.com}
    Or you could do that by simple
    <a href="http://www.sdn.sap.com/irj/portal/myql">CLICK</a>
    {check for Quicklinks on help.sap.com}
    Either way you'll have to make a small JSP for that.
    Hope this helped
    If so kindly reward with points
    Prem

  • I have just installed Illustrator CS6 yesterday, but I found it was in French. Could help me figure out how to change the language into English?

    I have just installed Illustrator CS6 yesterday, but I found it was in French. Could help me figure out how to change the language into English?
    I got my series number from my Institut (which is in Paris, FR). I do not use Creative Cloud.
    When I was installing the software, I cannot select a language.
    Could you help me with my problem? Do I have to get a different series number?

    lunc,
    You will have to get a new application in English, to replace the French one.
    You, or your Institute will have to get help from Adobe, I am afraid.
    You may try a chat here,
    Get help with orders, refunds, and exchanges (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
    http://helpx.adobe.com/x-productkb/global/service-b.html
    or (have your Institute) talk to Adobe in France
    http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html
    If you fail to get any help, please report back here, and I will ask a special forum staff friend to try to find the right one at Adobe to have things sorted out.

  • How to shrink the MS SQL 2005 Databse.

    how to shrink the ms sql server 2005 databse on windows 2003 server?

    What's the filling level of the database?
    Markus

  • How to covert the Digits into Barcode

    hi friends,
    how to covert the numbers into Barcode notation in java
    pls help me out.

    Hi,
    See http://jbarcode.ronisons.com/doku.php
    Hope that help,
    Jack

  • How to Splilit The String Into Single Column using Comma As Delimiter ?

    How to Splilit The String Into Single Column using Comma As Delimiter ?
    using Function

    refer my thread ,code is also available see if that helps you
    error while executing the sp ORA-21779: duration not active

  • How to maintain the data  into database table

    Hi,
    experts,
    how to maintain the data  into database table

    There are several ways to maintain data in the database
    1. Use table maintanance generator . You can create this using SE11 and data can be edited through SM30.
    2. Loginto  SE11 with the specified table and check the ATTRIBUTES tab. There you can set some parameters for maintaining the database. When you set Maintain database, you edit the data thorugh SE11 it self
    3. Through Se16 as well.
    4. A small abap program can do the above task as well.
    Thanks,
    Raj
    Edited by: Rajanya Kolavennu on Feb 5, 2008 8:33 PM

  • How to write the data into EEPROM using Labview?

    How to write the data into EEPROM using Labview?

    You would need some sort of EEPROM programmer. Typically might
    communicate with it via serial. I don't know how you would do this in
    LV. You would need to have the command protocol for the programming
    device to start with.
    Doug De Clue
    gpibssx wrote in message news:<[email protected]>...
    > How to write the data into EEPROM using Labview?

  • How to pull the data into smartform after designing layout?

    how to pull the data into smartform after designing layout?

    call the smartform in your Driver program and pass your output internal tables in the smartforms paramaters
    Check the below Sample code.
    FORM label_print.
      DATA : g_fm_name TYPE rs38l_fnam,
             g_output  TYPE ssfcompop,
             g_control TYPE ssfctrlop,
             g_form TYPE tdsfname VALUE 'ZPRINT_LABELS',
             g_dest TYPE rspopname,
             g_printer TYPE rspoptype..
      REFRESH : i_out[],i_qals[].
      SELECT matnr maktx
             INTO TABLE i_out
             FROM makt
             FOR ALL ENTRIES IN i_mseg
             WHERE matnr = i_mseg-matnr
             AND   spras = sy-langu.
      SELECT prueflos objnr ersteldat erstelzeit matnr revlv charg mengeneinh
             INTO TABLE i_qals
             FROM qals
             FOR ALL ENTRIES IN i_mseg
             WHERE matnr = i_mseg-matnr
             AND   charg = i_mseg-charg.
    *FM to accept the device type and returns the short name of the output device
      CALL FUNCTION 'EFG_GET_PRINTER'
        EXPORTING
          x_no_dialog  = ' '
          x_obligatory = 'X'
        IMPORTING
          y_tddest     = g_dest
        EXCEPTIONS
          cancelled    = 1
          failed       = 2
          OTHERS       = 3.
    *device type name for the output device
      SELECT SINGLE patype                                  "#EC CI_NOFIELD
             FROM tsp03d
             INTO g_printer
             WHERE padest = g_dest.
    *printer setting
      g_control-no_dialog = 'X'.
      g_output-tdarmod = '1'.
      g_output-tdcopies = '001'.
      g_output-tddest = g_dest.
      g_output-tdprinter = g_printer.
      g_output-tdnewid = 'X'.
      g_output-tdimmed = 'X'.
      CLEAR wa_mseg.
      LOOP AT i_mseg INTO wa_mseg.
        READ TABLE i_out INTO wa_out WITH KEY matnr = wa_mseg-matnr.
    check for the status and filter the records
        CLEAR : wa_qals.
        LOOP AT i_qals INTO wa_qals WHERE matnr = wa_mseg-matnr
                                    AND charg = wa_mseg-charg.
          CALL FUNCTION 'STATUS_TEXT_EDIT'
            EXPORTING
              objnr            = wa_qals-objnr
              spras            = sy-langu
            IMPORTING
              line             = l_status
            EXCEPTIONS
              object_not_found = 1
              OTHERS           = 2.
          IF l_status CS 'LTCA' OR l_status CS 'SKIP'.
            DELETE i_qals.
          ENDIF.
        ENDLOOP.
        SORT i_qals BY ersteldat DESCENDING erstelzeit DESCENDING.
        IF i_qals IS INITIAL.
          l_msg = text-002.
        ELSE.
          READ TABLE i_qals INTO wa_qals INDEX 1.
          SELECT prueflos vbewertung
                 INTO TABLE i_qave
                 FROM qave
                 WHERE prueflos = wa_qals-prueflos
                 AND   kzart = 'L'.
          IF sy-subrc <> 0.
            l_msg1 = text-003.
          ENDIF.
          SORT i_qave.
          CLEAR : wa_qave.
          IF NOT i_qave IS INITIAL.
            READ TABLE i_qave INTO wa_qave INDEX 1.
            IF wa_qave-vbewertung = 'A'.
              l_msg = text-002.
            ELSEIF wa_qave-vbewertung = 'R'.
              l_msg1 = text-003.
            ELSE.
              l_msg1 = text-003.
            ENDIF.
          ENDIF.
        ENDIF.
        CLEAR : wa_ser03.
        READ TABLE i_ser03 INTO wa_ser03 WITH KEY mblnr = wa_mseg-mblnr.
    *Calling Smartform
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
          EXPORTING
            formname           = g_form
          IMPORTING
            fm_name            = g_fm_name
          EXCEPTIONS
            no_form            = 1
            no_function_module = 2
            OTHERS             = 3.
        LOOP AT i_objk INTO wa_objk WHERE obknr = wa_ser03-obknr.
    *Calling FM generated from the smartform
          DATA : l_date(10) TYPE c,
                 l_date1(10) TYPE c,
                 l_date2(10) TYPE c,
                 l_date3(10) TYPE c,
                 l_hyphen(1) TYPE c VALUE '-'.
          CLEAR : l_date,l_date1,l_date2,l_date3.
          l_date1 = wa_mseg-vfdat+0(4).
          l_date2 = wa_mseg-vfdat+4(2).
          l_date3 = wa_mseg-vfdat+6(2).
          CONCATENATE l_date1 l_hyphen l_date2 l_hyphen l_date3 INTO l_date.
          CALL FUNCTION g_fm_name
            EXPORTING
              control_parameters = g_control
              output_options     = g_output
              user_settings      = ' '
              g_matnr            = wa_mseg-matnr
              g_mat_text         = wa_out-maktx
              g_batch            = wa_mseg-charg
              g_rev              = wa_qals-revlv
              g_edate            = l_date
              g_lot              = wa_qals-prueflos
              g_qty              = wa_mseg-erfmg
              g_uom              = wa_mseg-erfme
              g_serial           = wa_objk-sernr
              g_smsg             = l_msg
              g_fmsg             = l_msg1
            EXCEPTIONS
              formatting_error   = 1
              internal_error     = 2
              send_error         = 3
              user_canceled      = 4
              OTHERS             = 5.
          CLEAR  g_output-tdnewid.
        ENDLOOP.
        IF sy-subrc <> 0.
          CLEAR : l_date,l_date1,l_date2,l_date3.
          l_date1 = wa_mseg-vfdat+0(4).
          l_date2 = wa_mseg-vfdat+4(2).
          l_date3 = wa_mseg-vfdat+6(2).
          CONCATENATE l_date1 l_hyphen l_date2 l_hyphen l_date3 INTO l_date.
          CALL FUNCTION g_fm_name
            EXPORTING
              control_parameters = g_control
              output_options     = g_output
              user_settings      = ' '
              g_matnr            = wa_mseg-matnr
              g_mat_text         = wa_out-maktx
              g_batch            = wa_mseg-charg
              g_rev              = wa_qals-revlv
              g_edate            = l_date
              g_lot              = wa_qals-prueflos
              g_qty              = wa_mseg-erfmg
              g_uom              = wa_mseg-erfme
              g_serial           = wa_objk-sernr
              g_smsg             = l_msg
              g_fmsg             = l_msg1
            EXCEPTIONS
              formatting_error   = 1
              internal_error     = 2
              send_error         = 3
              user_canceled      = 4
              OTHERS             = 5.
          CLEAR g_output-tdnewid.
        ENDIF.
      ENDLOOP.
      IF sy-subrc = 0.
        MESSAGE i000(zm).
      ENDIF.
    ENDFORM.                    " label_print

  • How to write the resultset into a text file

    how to write the resultset into a text file

    You can use the java.io.* package to write to files.
    API: http://java.sun.com/j2se/1.5.0/docs/api/java/io/package-summary.html
    Tutorial: http://java.sun.com/docs/books/tutorial/essential/io/index.html

  • Guys, i want to ask on how to resize the images into 1200 pixels wide?

    Guys, i want to ask on how to resize the images into 1200 pixels wide, how to do it? and what are the step by steps on doing that? thank you!!!

    See this link: http://forums.adobe.com/docs/DOC-3691

  • How to escalate the workitem into the worklist of new agent

    Hi,
    We have created a workflow for complaint management in SAP CRM system that includes mainly:
    Triggering event is CREATED event of Business Object: BUS2000120 (CRM Complaint).
    Activity for assigning the complaint WorkItem in the WokList of agent determined through rule of category: Function module to be executed.
    Now the requirement is to escalate the WorkItem into the worklist of some other user after 7 days from the creation date of complaint and into WorkList of some third user after 14 days.
    We have written the code to find the actual agent based on creation date in the FM of rule, but not finding any way to trigger the FM after 7 days and after 21 days again to redetermine the agent and reassign the WorkItem into the WorkList of newly calculated agent.
    I am very new to Workflow design. Please help if anyone knows the procedure how to escalate the workitem into the worklist of some new user.
    Thanks & Best Regards,
    Kavita Chaudhary

    hi kavitha,
    if you want to configure worklist go to se63.there are four level of hierarchy. there in object types u can add ur workitem..if you are going for a universal worklist then u should have
    ● SAP NeWeaver Portal
    ● Application Server Java (AS Java)
    ● SAP Business Workflow
    ● Collaboration Task
    ● Alert Management
    also  you  must be an admin..

Maybe you are looking for

  • Unable to auto start database/listener/EM on Oracle Enterprise Linux 5

    All Experts I have install oracle 11g on Oracle Enterprize Linux 5 successfully. done all post installating steps, but when i restart server oracle listener/database/EM not automatically start. Please guide what is wron (server dbora error: /bin/sh:

  • Airport Extreme Stopping G5 from Sleeping.. Help!!

    I have just upgraded to Leopard. Before the upgrade my G5 would go to sleep automatically as set in the Power saving prefs. After upgrading to leopard I found that my G5 will not automatically go to sleep. After pulling my hair our I have finally dis

  • Email address and uploading through DPS

    I have a Professional account for DPS and with that, I use the Adobe ID-related email address (that was registered to the account when it was set up) to upload my folios. But say my company needs to build and upload say 3 folios in one day - do all t

  • Bridge CS6 re-extracting layered tif previews

    The new Bridge is constantly starting over building thumbnails for a collection of layered tif files I have. I can select a different folder and come back, or if Bridge is in the background and I bring it foward, it starts extracting thumbnails for a

  • Canon 6D OR Rebel T4i?

    I hve been taking pictures for about 30 years as a photo enthusiast. I currently own an EOS rebel 450 D, along with a 10-22 EF-S F 3.5/4.5 USM and a 70-200 EF Zoom. I  am going to Hawaii next month and have to make a decision as to what camera I will