How to shuffle pages during printing?

Hello All,
I am using Assembler Service to stitch forms at run time. Then print the form. Lets say after stitching the form has 5 pages. But while printing I want that the printout should come out in a such a manner that Page 3 should be the first page followed by page 4 then page 1, then page 2, then page 5.
Any help would be greatly appreciated.
Thanks,
Bibhu.

Hi Jono,
It has nothing to do in the assembler once the form is stiched dynamically using assembler service. The user will see a different page order before printing. But the printouts which will come out of the printer will shuffle the pages.
Is that doable?
Thanks,
Bibhu.

Similar Messages

SAPScript: Structure with the current print page during printing?

Hello,
ist the a structure which is filled with current infomation about the printed SAPScript form. For example can I get the current printpage during printing the form? Thanks.
Regards. Lars.

You can use directly <b>&PAGE&</b>.
This will print the current page number.

How to get the total no of pages during printing of initial page

In sapscript, I am able to print "page 1 of 4,...".
In ABAP list, how can I do that?
Thanks
Bye

Hi Colin,
you can use this:
&SAPSCRIPT-FORMPAGES&*
Total page number based on the current output layout set:
&SAPSCRIPT-JOBPAGES&*
Total page number based on all output layout sets created with the function modules OPEN_FORM, START_FORM .. ENDFORM, START_FORM .. END_FORM, ..., CLOSE_FORM
This info is shown in this link:
[http://help.sap.com/saphelp_45b/helpdata/EN/6c/897415dc4ad111950d0060b03c6b76/content.htm|http://help.sap.com/saphelp_45b/helpdata/EN/6c/897415dc4ad111950d0060b03c6b76/content.htm]

IDCS 1.0 How to arrange pages to print brochure?

I'm qualified to do fairly simple documents on IDCS 1.0, but that's all. I've done a twelve page brochure to be read by scrolling one page after another. Now, I need to prepare a version that can be run on a FedEx-Kinkos' Xerox Docucolor printer to produce a printed brochure that can be stapled in the middle and folded in half to make it look like a book with text and artwork on every page. I understand that page 1 needs to be on the first page on the right side (of the facing pages) and page 12 on the left and that on the back of that page, call it the second page, page 2 is on the left and page 11 on the right and so forth until all pages are finished. The printer will first print facing pages on the "front" of a page and then turn the page over and print the next set of facing pages on the "back" of that same page and then print on the "front" of the next page and so forth. Please forgive me for using the word "pages" for two different things, but I don't know any other words to describe what I'm trying to do.
I've never done this before and I can't really make sense of ID's help items. I opened a new document with the intent of copying a page from the source document and pasting it in the appropriate location on the new, destination document. I tried to set up facing pages to get this going, but I always get a single page at the beginning and another single page at the end of the document. I can't get them all to be facing pages.
Questions:
1. Is there a way to get IDCS 1.0 to do the desired arranging automatically by operating on a second copy of the single paged (non facing) document?
2. If not, how do I get the pages window to show only facing pages. It seems stuck with a single page at the beginning and another single at the end of the document. I'd appreciate very much being pointed in the right direction. Thanks.

You are correct. InBooklet SE was no longer available to Adobe after Quark bought ALAP. Adobe did replace the functionality to some degree with a "print booklet" feature for output. However, it cannot be used for PDF export.
Our recommendation is generally that page imposition is absolutely not an appropriate task to be performed in a page layout program which better handles pages in logical page order. Imposition is best performed by the print service provider at the RIP or via their PDF workflow software. Another very good solution is to impose the document (whether doing n-up, step-and-repeat, booklets, etc.) in Acrobat. Simple booklets can be readily printed by Acrobat Pro. More complex imposition tasks yielding a new, fully imposed PDF file of print flats can be handled by some third party plug-ins for Acrobat including Quite Software's "Quite Imposing" and "Quite Imposing Plus.
- Dov

How To Print Field Value in TOP-OF-PAGE During Line Selection.

How To Print Field Value in TOP-OF-PAGE During Line Selection when double click on field.

(If my memory serves me well (not used for long time ago)
Assign values to system fields sy-tvar0 - sy-tvar9, they will replace the placeholders "&0" through "&9" in the list headers and column headers.
TOP-OF-PAGE DURING LINE-SELECTION.
WRITE: / 'Interactive Report &3'.
WRITE record-vbeln TO sy-tvar3.
Regards,
Raymond

How do I get the "auto portrait/landscape" option to show during printing in Adobe Reader Touch

When I print using Adobe Reader Touch, the "auto portrait/landscape" options does not show up. As a result, all pages in a document are printed in the same orientation even if they are not all of the same orientation in the file itself. I don't believe this is a printer issue because if I use Adobe Reader X (v. 10.1.6) on the same computer/printer, the auto option does show up and the documents print as desired. I use Windows 8. As the video quality of Adobe Reader X is extremely blurry in Windows 8, I would like to be able to use Adobe Reader Touch exclusively. How do I get the latter to give me the "auto portrait/landscape" option during printing?
Thank you,
Pelle

Hello Pelle,
Thanks for the feedback. Our printing code in Adobe Reader Touch doesn't have that capability right now, but since you mention it we should probably do what you're requesting by default. I'll put that into our backlog for a future update, but I can't say yet when it will be available.
In the interim, if you have pages that are different orientations, you can print them in blocks manually to get what you want, but I understand that's a hassle.
Dennis

I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open? Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?

I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open? Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
Thanks,
Shir

sbmgrams wrote:
I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
See here:
Reading PhotoDeluxe PDD Files

How do i fix my printer when it won't show the print preview for web pages? it worked and now not.

how do i fix my printer when it won't show the print preview for web pages? it worked for a while and now it doesn't. printer is an hp officejet 7310 all-in-one.

I would suspect this is a hardware issue. The rollers are probably having issues picking up the relatively smooth thick media. You might have better results be cleaning the paper pickup rollers with a damp paper towel. Also make sure the paper is snugly loaded and the paper guides have been correctly positioned.
Regards,
Bob Headrick, MS MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Only the first page is printed reduced as setup. All pages afterward are full size with information cut off. Recent problem. Can print from Safari just fine. How can I get all pages to be reduced size?

Question
Printing internet pages
Reduced print size
Only the first page is reduced and printed as desired
All pages after the first page are full size with information cut off
Recent problem never seen before
Can print from Safari and other software just fine
How can I get all pages to be reduced size?

One suggestion worked from the Firefox prints incorrectly link mentioned above by mha007. I'm thrilled since this has been annoying me for weeks. Thanks mha007!
Reset all Firefox printer settings
# Open your profile folder:
# On the menu bar, click on the Help menu and select Troubleshooting Information. The Troubleshooting Information tab will open.
# Under the Application Basics section, click on Show in Finder. A window with your profile folder will open.
# Note: If you are unable to open or use Firefox, follow the instructions in Finding your profile without opening Firefox.
# On the menu bar, click on the Firefox menu and select Quit Firefox.
# In your profile folder, copy the prefs.js file to another folder to make a backup of it.
# Open the original prefs.js file in a text editor (such as TextEdit).
# Remove all lines in prefs.js that start with print. and save the file.
# If something goes wrong when you open Firefox, close it again and overwrite prefs.js with the backup you made.

There are hidden pages in the PDF form I have. How can I see and print all without clicking on the

I have hidden pages in the PDF form I'm using (but didn't create). How can I see and print all the pages at once without clicking on the "next page" button. In the initial view, there are four pages, but if I click the "next page" button, there are a total of 12 pages in this document. This is three budget years, each year being 4 pages long.

You're most likely dealing with a dynamic XFA form created in LiveCycle Designer. You can open it, click the button, and save it, and it will most likely be 12 pages when next opened, but it depends on how the form is set up. The ability to make edits to an XFA form in Acrobat is very limited, especially for dynamic forms, so things like flattening aren't possible.
If it's not an XFA form, you'd still need to click the button at least once and save. To say for sure what's possible, I'd need to see the document. Can you post it somewhere?

How to get windows username printed on each page irrespective of application? we have cm6030f.

How to get windows username printed on each page irrespective of application? we have HP CM6030F.

Hi,
Normally, you will receive a Windows Azure Pass from your local Windows Azure team. Please try to contact your local Windows Azure contact (http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Also, you could see this page
http://www.windowsazurepass.com/AzureU/AcademicFAQ and apply the free trial azure via (http://www.windowsazurepass.com/AzureU/).
Q: I am a student. Can I apply for a pass?
A: Windows Azure Educator Grants are only for valid faculty. If your faculty has been awarded a Windows Azure Educator Grant, you will be able to get a pass through him/her for you coursework. If you are interested in learning more about Windows Azure,
we encourage you to share these Educator Grants with your faculty or sign up for the FREE 3-month trial offer.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I address and print an envelop from a letter created in Pages 09?

How can I address and print an envelop from a letter created in Pages 09?

You can copy & paste the address from the letter into a document formatted to envelope size. I prefer to use the EasyEnvelopes widget. If you have copied an address to the clipboard, it will automatically be added to the widget.

I am using Pages to print addresses but they print too low on the envelope. How do I change this?

I am using Pages to print addresses but they print too low on the envelope. How do I change this?
Help please!!!
ANN

Hi Isk8ter,
Welcome to the Support Communities!
What version of Pages are you working with? I'm assuming '09 since you reference OS X 10.7.4 above.
I've included the link to the Pages User Manual for you below.
Page 253 starts the chapter on Printing, Shareing and Exporting your document.
Pages '09 User Manual
manuals.info.apple.com/MANUALS/0/MA663/en_US/Pages09_UserGuide.pdf
Setting the Paper Size and Orientation
Before you print, you should make sure the paper size and orientation are set the way you want by opening the Page Setup dialog.
To set paper size and orientation:
1 Choose File > Page Setup.
2 In the Page Setup dialog, choose the printer you will use from the “Format for” popup
menu.
3 Choose a standard paper size from the Paper Size pop-up menu.
Also, see page 266 of the Pages User Manual for more specific instructions for creating a custom template for envelopes.
Hope this helps ...
Judy

On Yosemite how do I get Pages to print the page number on every page, not just on alternate ones?

I only changed from Windows to an iMac earlier this year (now on Yosemite), but cannot get Pages to print the page number on every page; it seems only to do it on alternate pages.

Jeff,
I do NOT understand your positive attitude. If someone has a problem with Numbers in Yosemite, you tell them to resurrect a pre-Yosemite version of Numbers.
The VIEW LAYOUT command is basic and critical to Numbers; how could Apple over-look such an important function in Yosemite ... ???
Joe

How do i set up "print to iPhoto" from pages

How do i set up "print to iPhoto" from pages

lamen88 wrote:
How do i set up "print to iPhoto" from pages
I wasn't aware that you could do that directly. Did you see that witten somewhere, or are you asking if it is possible?
My approach would be to Print to PDF, use Preview.app to export the PDF to PNG and drag the PNG file into iPhoto.
Regards,
Jerry

How to shuffle pages during printing?

Similar Messages

Maybe you are looking for