How to shutdown the PC using Lab View
Hi,
We are doing UPS project. In this project we have to shutdown the PC if there is a battery low condition. I want to know whether is their any library function in Lab View to shutdown the PC. And also we want make this labview to run in background whenever PC turns ON, is their any way to make Lab View VI to run in background process. We are also planning to send UPS Status through SMS message to specified mobile number using modem, is their any way to do this using Lab View. Please help me in this regards.
Regards
Shivakumar Singh
Sorry
Attached now
"Qod natura non dat, Salmantica non praestat"
Attachments:
Shutdown_labview.zip 67 KB
Similar Messages
-
How do i activate a 3 way valve using lab-view ????
I am trying to automate a miniature punch press by connecting it to a computer having labview. this is done thro a 3 way valve which is in turn connected to an air compressor.
I would like to know how i wud be able to control the valve using lab view ?Your question reads like;
"I would like to know how I can drive a car using my hands?"
Please provide the details on the value (inputs/outputs) and the type of hardware you are using to act on the valve.
Trying to help!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
How to get the list of database Views modifying the DB tools list tables.vi
Hi,
I have a problem, I just started using LabVIEW and in particular the LabVIEW connectivity toolkit and I am lookig fgor suggestion regarding how to get the list of database Views modifying the DB tools list tables.vi...
Thanks in advance,
MichelaHi Michela,
since the VI you want to modify is part of a Toolkit, I suggest you to copy the whole block diagram in a new VI and then save it in a new location.
Place the DB List Tables.vi on a block diagram, double click on it and go to the tab "Window -> Show Block Diagram "
Select "Edit -> Select All" to select the whole block diagram and select "Edit -> Copy"
Open a new VI and select "Edit -> Paste"
Save the new VI
In this way you can modify everything you want without overwriting the Toolkits VIs.
Hope this can help.
Regards,
Andrea N.
Systems Engineer ATE & RF - Mediterranean Region
National Instruments Italy -
How to run the job using DBMS_SCHEDULER
How to run the job using DBMS_SCHEDULER
pleas give some sample Iam very new to DBMS_SCHEDULERHi
DBMS_SCHEDULER
In Oracle 10g the DBMS_JOB package is replaced by the DBMS_SCHEDULER package. The DBMS_JOB package is now depricated and in Oracle 10g it's only provided for backward compatibility. From Oracle 10g the DBMS_JOB package should not be used any more, because is could not exist in a future version of Oracle.
With DBMS_SCHEDULER Oracle procedures and functions can be executed. Also binary and shell-scripts can be scheduled.
Rights
If you have DBA rights you can do all the scheduling. For administering job scheduling you need the privileges belonging to the SCHEDULER_ADMIN role. To create and run jobs in your own schedule you need the 'CREATE JOB' privilege.
With DBMS_JOB you needed to set an initialization parameter to start a job coordinator background process. With Oracle 10g DBMS_SCHEDULER this is not needed any more.
If you want to user resource plans and/or consumer groups you need to set a system parameter:
ALTER SYSTEM SET RESOURCE_LIMIT = TRUE;
Baisc Parts: Job
A job instructs the scheduler to run a specific program at a specific time on a specific date.
Programs
A program contains the code (or reference to the code ) that needs to be run to accomplish a task. It also contains parameters that should be passed to the program at runtime. And it?s an independent object that can referenced by many jobs
Schedules
A schedule contains a start date, an optional end date, and repeat interval with these elements; an execution schedule can be calculated.
Windows
A window identifies a recurring block of time during which a specific resource plan should be enabled to govern resource allocation for the database.
Job groups
A job group is a logical method of classifying jobs with similar characteristics.
Window groups
A window groups is a logical method of grouping windows. They simplify the management of windows by allowing the members of the group to be manipulated as one object. Unlike job groups, window groups don?t set default characteristics for windows that belong to the group.
Using Job Scheduler
SQL> drop table emp;
SQL> Create table emp (eno int, esal int);
SQL > begin
dbms_scheduler.create_job (
job_name => 'test_abc',
job_type => 'PLSQL_BLOCK',
job_action => 'update emp set esal=esal*10 ;',
start_date => SYSDATE,
repeat_interval => 'FREQ=DAILY; INTERVAL=10',
comments => 'Iam tesing scheduler');
end;
PL/SQL procedure successfully completed.
Verification
To verify that job was created, the DBA | ALL | USER_SCHEDULER_JOBS view can be queried.
SQL> select job_name,enabled,run_count from user_scheduler_jobs;
JOB_NAME ENABL RUN_COUNT
TEST_abc FALSE 0
Note :
As you can see from the results, the job was indeed created, but is not enabled because the ENABLE attribute was not explicitly set in the CREATE_JOB procedure.
Run your job
SQL> begin
2 dbms_scheduler.run_job('TEST_abc',TRUE);
3* end;
SQL> /
PL/SQL procedure successfully completed.
SQL> select job_name,enabled,run_count from user_scheduler_jobs;
JOB_NAME ENABL RUN_COUNT
TEST_ABC FALSE 0
Copying Jobs
SQL> begin
2 dbms_scheduler.copy_job('TEST_ABC','NEW_TEST_ABC');
3 END;
4 /
PL/SQL procedure successfully completed. Hope it will help you upto some level..!!
Regards
K -
How to access the mysql using ordinary command line in Azure Website?
Hi
I deploying Django project on Azure. I created project and MySQL db according this method: https://pytools.codeplex.com/wikipage?title=PollsDjangoSql . I can create tables using django command "syncdb" in Visual Studio. I see
db structure in SQL Explorer. All works. But now I need to get access directly to mysql. For example with a view to set encoding of some column, or set permissions, change user password, etc.
I found about many different tools and methods in Microsoft portal. But the purpose of these tools, how to install it and how to use it is a very entangled (After several attempts to find out what's what two weeks later I found on my computer
three dozen programs with unknown purpose. I doubt that I need to install so many tools to just add the user in mysql).
How to access the mysql using ordinary command line (or the same simple tool) in my case?Hi pvgdrk,
To get access directly to a mysql database, you can use the commandline tool(open a cmd window-->type mysql the commadline ) or the
GUI MySQL workbench.
Since this is a question about MySQL, I would suggest you post your question in a dedicated MySQL forum. You will get more prompt response.
If you have any feedback on our support, please click
here.
Eric Zhang
TechNet Community Support -
Using lab view to control an Arduino led cube
Has anyone used lab view to control an Arduino led cube? It seems to me that you could make a pretty awesome project out of the two.
Hi there, I haven't done it my self but, you may find a tread at the LabVIEW Interface for Arduino Group including links to download the LabVIEW Interface for Arduino Toolkit . I think this will make the task easier. Good luck!
Alejandro | Academic Program Engineer | National Instruments -
How to log the exception using Log action in Oracle Service Bus
Hi,
Whenever an exception is raised how to log the exception using Log action in oracle service bus.After logging where I have to find the logged message.It would be in the log file for the managed server which ran the request. If you are logging the message at a lower level than your app server, however, you won't see it. You should be logging the exception at Error level.
-
How to get the workcentres used in the routing out of 2 alternate routings
Dear All,
I would like to know how to get the workcentres used in the routing out of 2 alternate routings.
I referred PLKO got the Task List Type (PLNTY), Group(PLNNR), Group Counter(PLNAL), Plant(werks).
I passed this in to PLPO, The problem in PLPO is we dont have the distinguishing field Group Counter(PLNAL), so I am getting all the ARBID including both alternates.
How to get the ARBID with respect to Groupcounter 1 alone.
If a get the ARBID , I can get the ARBPL from CRHD.HI,
Use PLAS Table also. you have to use PLKO> PLAS> PLPO.
Pass PLNNR & PLNAL in PLAS and get PLNNR & PLNKN.
Then pass these into PLPO.
work centers from CRHD
Regards,
Krishna Mohan
Edited by: Krishna Mohan N on Jan 31, 2008 12:28 PM -
How to reduce the width of OVS view layout
Hi All,
In ESS-Bank Information-Bank Payee field we have a OVS View UI .Can any one please let me know how to reduce the width of OVI view layout (Search Screen)
Regards
AlexCheck this [thread|restrict input field size;
Hope this helps. -
How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way
Hi,
Thanks for the suggestion. I've been playing around with some of the classes of the java.net package and java.io
Using the URL class i can get the content of the data from a STATIC page and output that response to file so that is does not display to the client broswer.
But this only works if the URL i give points to a static html page.
So the problem i'm getting is if i'm righting in arguments in the URL, this means that server needs to process the arguments i give and its sends back a dynamic result. Because its dynamic the URL class can not handle this and throws me an exception everytime :(
Have u ever tried to do some things like this?
Rahul -
How to repair the disk using recovery HD??
how to repair the disk using recovery HD??
ali ead wrote:
I dont understand u
What don't you understand?
Boot into the Recovery drive. See the link I posted.
The run Disk First Aid.
See this -> Disk Utility 12.x: Repair a disk -
Does anyone know how to calculate the impedance using waveforms
does anyone know how to calculate the impedance using waveforms?
studentproject wrote:
the waveforms represent the voltage and current values across a capacitive load. I am trying to find out if there is a way to do automatic calculations using the inputs from the waveforms
Hopefully a single sinusoid tone. Otherwise things get really interesting. Also know that impedance is based on the frequency. I'll have to dig into this again. I have not had to calculate an impedance in well over 10 years.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
How to change the browser used for Google search from context menu of selected text?
How to change the browser used for Google search from context menu of selected text?
It uses Safari. But I want to use Chrome (it's my default browser).How to change the browser used for Google search from context menu of selected text?
It uses Safari. But I want to use Chrome (it's my default browser). -
How to remove the Sessions used in the application
Hai Techies,,,
i am using many number of sessions in my application, for example i am using 5 sessions in reports module
my application is a web based application
if can't remove the sessions it contains the huge amount of data , my application is going into mess, and the application performance will be decreased..
Can anybody tell the solution for this Problem
How to remove the Sessions used in the application
Hoping a reply
Thanks & Regards
Krishna mangamuriHai Gita,
i am not able to do the session invalidate method bcoz, i am mainatainting the session from login along with the current userid who is login into the system and putting some of the data in session....
thats session is to be valid upto when i click on logoff link
except that i have to remove the sessions in my application
while navigating from one jsp to another i have to remove the sessions, bit somes times that sessions may be used somewhere
Can u Understand My problem
session remove method may also helpful to me but some times it will casue some prob to me
Is there any other Way to remove the sessions in the Application ????
Thanks & Regards
Krishna Mangamuri -
How to insert the data using matrix
Hi
All how to insert the data using matrix feild
plz help me
thanks
LoyHi Loy,
The best way to fill an entire matrix is to use a DBDatasource, here is some sample code:
Dim oForm As SAPbouiCOM.Form
oForm = SBO_App.Forms.Item("YourFormTypeID")
'1. Add a DBDataSource to the form
oForm.DataSources.DBDataSources.Add("OUSR")
Dim oColumnDBS As SAPbouiCOM.Column
Dim oColumnUDS As SAPbouiCOM.Column
Dim i As Integer
Dim GenEdt As SAPbouiCOM.EditText
Dim oMatrix As SAPbouiCOM.Matrix
Dim oColumns As SAPbouiCOM.Columns
Dim oDBDataSource As SAPbouiCOM.DBDataSource
oMatrix = oForm.Items.Item("7").Specific
oColumns = oMatrix.Columns
'2. DBDataSource: Binding a field / alias of the table to a column
oColumnDBS = oColumns.Item("V_1")
oColumnDBS.DataBind.SetBound(True, "OUSR", "U_NAME")
'3. getting the data sources bound to the form
oDBDataSource = oForm.DataSources.DBDataSources.Item("OUSR")
oMatrix.Clear()
' Querying the DB Data source
oDBDataSource.Query()
' Adding the data to the matrix
oMatrix.LoadFromDataSource()
When you want to fill a specific field use :
GenEdt = oMatrix.Columns.Item("V_2").Cells.Item(1).Specific
GenEdt.String = "Hello"
Maybe you are looking for
-
Hi Folks, Please provide any ideas how to disable obiee cookies in a web browser. we should ask for log in credentials again when web browser closes with out a log out call... Thanks Ram
-
Dear Experts I am working for steel industry client. we are facing as issue of Inconsistency in old sale orders,suppose we change a dependency the existing & older sales orders are getting effected,can some body suggest some procedure to avoid sale
-
Can't Open "Lightroom 5" from CC Desktop Application
The CC Desktop shows my "Lightroom 5" application with check mark as "Up to date". However, it does not have link to open the application form there...is it common? or something needs to be set? As I roll over on Photoshop or Bridge, the cursor poi
-
Oracle 12c vs. TimesTen
With Oracle 12c In-Memory capability is there a reason to still use TimesTen? Is Oracle going to try and phase out TimesTen? Would be interested in hearing thoughts.
-
sample:?Polaris_Measure@CCBjxguance@@QAA_NPBG0@Z i know CCBjxguance is export class,Polaris_Measure is class's function,@@QAA_NPBG0@Z is params and return value,but @@QAA_NPBG0@Z mean ? which data type ?