How to silent and turn off the flash light the E63...

I would like to turn the flash light off and also the beeps while I am taking a movie with my Nokia E63 but even doing that in picture mode (the only place where I can find such option) it continues to power on the led during my takes even in full daylight, so if someone can help me to turn off both the light and the sounds I will appreciate.
Flavio C Buccianti

i made some research, apparently there's an application that you can use, it's called a ccam? it's supposed to turn the shutter off and the LED light as well. i tried it, but it says that the certificate has expired and it seems like too much hard work to have it signed so i didn't bother. you can look it up.

Similar Messages

OA 6.1.3. How you find and turn off things running in the background

Using an iPad wiTh OS 6.1.3 - I can find what things are running in the background, but I can't slide them up and off the screen. Suggestions.
Thanks.

On iOS6 or below, double tap the home button. The app icons will line up on the bottom of the screen. Hold your finger down on one of them and they'll all start to wiggle. You'll see little white - signs in a red circle. Tap on the app(s) you want to close. Single tap the home button to exit the mode.

My iphone 4 contantly has no service and turns off by itself all the time?

my iphone 4 contantly has no service and turns off by itself all the time?

Hi hqhair@aol,
If you are having unusual service and shut off issues with your iPhone, you may find the following articles helpful:
iPhone: Troubleshooting No Service
http://support.apple.com/kb/ts4429
iPhone: Hardware troubleshooting (under the Power/Battery section)
http://support.apple.com/kb/ts2802
Regards,
- Brenden

Links set in XHTML Transitional with target="_blank" are not opening in a new window. I have allowed popups and turned off ad blocker, but the links still open in the same window.

This is on a Wordpress install. Is there a Firefox setting I'm missing? Otherwise, I shall have to install a javascript plugin to do this, which seems overkill for what used to be common code.

I don't know how to delete my question, anyway I'm not having this problem anymore. In our organisation the IT department deploy Firefox updates with certain settings and limitations, in the tap-options the checkbox for opening new windows in new tabs where checked but disabled. They made some changes to make this checkbox enabled and now it works as expected if it's check new windows open i new tabs and if it's not in new windows. They never opens in the same tab as they did before.

How do i permanently turn off color management in the 9000

i am using Lightroom 4. My prints are always slightly reddish. What are the settings I need to use to get good color.
My monitor is calibrated and I am using all Canon inks and papers

Hello rhfrhf.
Please perform the following:
1. Close all programs that are open.
2. Click Start and open the Control Panel.
3. Open Printers or Devices and Printers.
4. Right-click the Pro9000 and choose Preferences or Printing Preferences.
5. In the Main tab, set the Color/Intensity to Manual and click Set.
6. In the Matching tab, select None and click OK.
7. Click Apply and OK.
Once this has been done the adjustment will be complete.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

N x3-02 Flashes twice and turns off

when i turn on my nokia x3-02 is Flashes twice and turns off.
He starts the system, but then when home screen open . is flashing twice and closed,
and this go again and again and again..
I have tried everything.
i can not restore the system of the phone in NSouite , because the phone are closed.. and then the software did not realize it..
what i can do?????

Remove the Batter for a couple of minutes.. Insert..and check if the phone gets ON.. If not then check for any difference without the SIM and the Memory Card.
If no difference then you must visit Nokia Care...

System boots and turns off in seconds

My system is hp dv7 4010tx it was working perfectly and suddenly it turned off and now just power on all lights up and fan run just for seconds and turns off I have done the hard reset still nothing can u guys plz help me ?

Hi pvharis,
Thank you for joining the HP Forums! It will be hard to determine the exact cause of the problem if it doesn't stay on. At the moment it just turns for a few seconds and then dies away. There could be a problem with the battery or the power cord possible not charging properly. Do you have another power cord that you could try? Do you ever see the Num or Caps Lock keys flashing? If so how many times does it flash?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

E3000 questions. Cisco Connect with https and turn off wireless?

My old router died this weekend after 10 years and I have been wanting to get a faster router for a while anyways.
I picked up a E3000 and set it up yesterday.
The firmware is 1.0.03
I have two main questions
I changed the router settings so you can only browser manage the router through https and turned off http access to the router.
Cisco Connect now doesn't work. Will Cisco Connect work with HTTPS? Do I have to do something to get it to work?
I also didn't see a version number on Cisco Connect am I just not noticing it?
I'd really like to shut off wireless on most days when I'm not home. I want the router to still be working since my desktop computers are directly connected to the router and I remote into them. Is there an easy way to shutoff the wireless and then easily turn it back on when I get home?
thanks
mike

Mine works the same. It's probably designed that way for the manual way of logging into the setup page of the router.
No, it seems no updates yet or see the need to have one.
No, it doesn't have that option unfortunately.
"The war between heaven and hell depends on the choices we make, and those choices require sacrifice. That's the test"

I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

I have exactly the same problem.
I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
What the **** Is The Microsoft Deal with all of this!?!?
PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
If anyone has a link, it would be appreciated.
Message was edited by: nostrawaggus

I was using my ipad it was under 10% but no under 4% it turned off then i pluged the charger in and flashed on then showed apple sign after i turned it on. now its going back and forth from the apple sign and battery symbol ive changed chargers its not on

hey please help!
i was using my ipad it was under 10% but no under 4% it turned off then i pluged the charger in and flashed on then showed apple sign after i turned it on. now its going back and forth from the apple sign and battery symbol ive changed chargers its made no differnce its been like 3 hours ive tried to do that reset thing holding lock button and home button for 10 seconds at the same time. WHAT DO I DO?

Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

I have locked myself out of my iPad and can not restore unless I go onto the iPad and turn off FindMyiPhone, how do I sort this out?

After installing iOS7 I was prompted to make a passcode, I did so and stupidly forgot and now continually am disabling my iPad, ways in which I have read you can sort this is restoring your iPad, however I can not restore without iTunes telling me I need to go onto the iPad and turn off FindMyiPhone! How else can I sort this? It is logged into my apple account and everything! This is an iPad 2 also ASAP help!!

Hello shanefox,
This can be done by logging in at iCloud.com and removing your device via the Find My iPhone web interface.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
Cheers,
Allen

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase and start over?

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?

Hello there, LynnS.
The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
OS X Mavericks: Erase and reinstall OS X
http://support.apple.com/kb/PH14243
Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
OS X Mavericks: Recover your entire system
http://support.apple.com/kb/PH14185
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

When installing third party software, how do I temporarily turn off the factory installed virus sw and firewall?

when installing third party software, how do I temporarily turn off the factory installed virus sw and firewall? Is it necessary on a Mac to do so? I come from the Windows world and am still in the learning curve on the Mac.

Correct. I have not installed ANY other software for anti-virus, etc. I want to install a Synch app for my HTC phone to sych with MS Outlook 2011 installed on my Mac. HTC will not synch with it otherwise. That was really the basis for my question....if installing a non Apple app can be done without messing with factory settings on the Mac. In Windows I remember that I needed to disable Norton and the Firewall in order for installation to occur.
Thanks.

HT1386 I don't want to sync my photos. I can turn off everything else but the photo's and it this is using up all my memory. How do I shut off photo sync when I plug in my iPhone?

I don't want to sync my photos. I can turn off everything else but the photo's and it this is using up all my memory. How do I shut off photo sync when I plug in my iPhone?

Open itunes, connect iphone, go to photos tab select what you like, sync

How do I completely turn off the backlit keyboard without using F5 and F6?

I believe my keyboard short circuited after a spill this weekend. I'm currently using a usb keyboard from Apple. I have disabled the keyboard, on my laptop, now I want to completely turn off the backlight. I've looked in the settings and can't seem to find anything. Thanks.

hi mtbomb,
hi Can you while the Power LED is blinking hold the power down don't let it go until the light disappeared.
Technically the Yoga13 should turn off while holding down the power. at least 10 to 15 sec.
I would suggest calling Technical Support if the above steps did not resolve the issue.
It's possible that when you turn on the system, it is not going to sleep but the blinking indicates failure.
Best regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to silent and turn off the flash light the E63...

Similar Messages

Maybe you are looking for