How to simply trim/cut MP3s and save as MP3?

"QT can trim mp3 files but when they are then saved they are put inside a QT .mov file wrapper."
Is it possible to get rid of this ".mov-wrapper" so I can simply SAVE an edited MP3 as MP3 without re-encoding it?

Quicktime is not re-encoding the mp3 but rather is saving the encoded file inside the .mov wrapper. You should notice that the save is almost instantaneous and you would never see that if any kind of encoding were occuring. Encoding is time intensive.
Actually, Quicktime does not "Save" anything in its original file structure unless that file structure was .mov. It creates new material in non-mov format only by "Exporting" it
You might want to take a look at Audacity, a freeware sound utility that can be extended to encode mp3 files:Audacity

Similar Messages

  • How can I Create Class Diagram and save as image in Java

    Hi
    I have to make a project in java that will generate class diagram of the input class file.
    I have some knowledge of listing methods/properties of a class file in text from but don't really know how to draw a class diagram model (JBuilder 2005 such class diagram whenever a class is compiled). I have to save that class diagram in an image file as well.
    Please guide me what must be my line of action to follow. I need some suggestions on urgent basis.
    Thanx in advance
    Regards

    Hi
    My problem is that I have to construct toll like JUDE. What I need from this tool is just to simply draw the diagrams and save in an image format.
    So I need to know how to draw the diagram and save in an image file. I don't know about the drawing libraries available in Java. Kindly help me
    Regards

  • How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?

    How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?  I would like them to open at the size they were previously resized like they used to in previous operating systems.  They currently open at a very small size and the first colum is only a few letters wide necessitating a resize practically every time one wants to use it.  Any help would be appreciated.

    hi Prasanth,
    select werks matnr from ZVSCHDRUN into table it_plant.
    sort it_plant by matnr werks.
    select
            vbeln
            posnr
            matnr
            werks
            erdat
            kbmeng
            vrkme
            from vbap
            into table it_vbap
            for all entries in it_plant
            where matnr = it_plant-matnr and
                  werks = it_plant-werks.
    and again i have to write one more select query for vbup.
    am i right?

  • How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interrupti​on.

    I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
    So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
    Thank you in advance.
    Regards,
    Attachments:
    HP8563E_Query_Amplitude.vi ‏37 KB

    Hi,
    Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
    So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
    I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
    So I want to acquire 1 time amplitude from spectrum analyser each 5
    period of the signal that I am acquiring from parallel port.
    So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
    Here is a new algorithm.
    1) i=0 (counter: number of period)
    2) I read value from In Port
    3) If I acquire a period
    i= i+1 (another period)
    4) If i is multiple of 5 (If I read 5 period)
    acquire 1 time amplitude and write to the same
    file this amplitude and the corresponding distance
    Distance = 12*i). Remember each period of signal
    Corresponds to 12 Inches).i has to take these
    values: 5,10,15,20,25,35,40,45,50,55,60............
    5) Back to 2 if not stop.
    Thank you very much for helping me.
    Regards,
    Attachments:
    Acquire_Amplitude_00.vi ‏59 KB
    Figure_Algorithm.doc ‏26 KB

  • How to insert a sound recording and save it to iTunes?

    How to insert a sound recording and save it to iTunes?
    I have 5 voice recording on my iPhone, but the fifth was not detected on iTunes.So i can't sync

     
    Hi,
    According to my analysis, for Digital Signatures: Adobe has changed the behavior around digital signatures and SharePoint-hosted PDF files. Now, when digitally signing a SharePoint-hosted PDF file, it will be saved directly to SharePoint if that PDF file
    is already checked out. If not, the user will be prompted to check it out. When digitally signing a SharePoint-hosted PDF file in Acrobat X, Version 10.0, the user would be prompted to save that file locally and would then need to upload it separately to SharePoint
    as a new version.
    I suggest that you use Acrobat X, then check the result. For more information about Acrobat X, please refer to
    http://blogs.adobe.com/pdfitmatters/2011/06/whats-new-in-acrobat-x-version-10-1.html
    In addition, you can also consider the following third-party tool:
    http://www.arx.com/digital-signature/sharepoint
    Thanks,
    Rock Wang

  • I have a custom template.  When I edit it and try to save it asks me to name it and then I end up with an additional custom template.  How do I edit the template and save the changes without creating another template?

    I have a custom template.  When I edit it and try to save it asks me to name it and then I end up with an additional custom template.  How do I edit the template and save the changes without creating another template?

    Hi Atrec,
    If you don't need your old custom template, save your changes with the same template name. It will tell you that this template exists and will ask you Replace? Say yes (if you do want to replace the old with the new!)
    To delete unwanted templates, go to Finder > Menu > Go and press the option key. Your Library will show in the Go Menu. Navigate to Library > Application Support > iWork > Numbers > Templates > My Templates.
    Delete any unwanted template by dragging it to the Trash or click on it then command-delete.
    Having gone to all that trouble to find My Templates folder, right click (or control click) on it and Make Alias. Drag the Alias to any convenient place for a quick way to get back to that folder.
    Regards,
    Ian.

  • How to scan with capture image and save 10.6.8

    how to scan with capture image and save 10.6.8 ?

    Instructions for using Image Capture for this available via the 2nd section.
    http://support.apple.com/kb/HT2502

  • How to I scan a document and save it to my computer?

    I just bought a PIXMA MG2920. How to I scan a document and save it to my computer? There is no buttons on the front, just the print buttons.

    Hi jmkj1234,
    To scan with your PIXMA MG2920, the IJ Scan Utility can be used.  To view how to scan, please use the following link:
    http://ugp01.c-ij.com/ij/webmanual/ScanUtility/W/MG2900%20series/1.1/EN/SU/su-004.html
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HT5148 how do i take my edited video from final cut pro and save it to my hard drive

    how do i take it from the program and save it as a .mp4

    Select File>Share>Masterfile and ensure that H.264 is selected.

  • How to withdraw a wrong open and save of a structured fm file in unstructured mode?

    I opened a structured fm file wrongly in unstructured mode and saved it. When I opened this fm file again in structured mode, the structure view has been blank. Does anyone no how to withdraw this?

    Dragon,
       To expand slightly on what Alex and Russ have said, whenever you delete content from a FrameMaker document  and save the result, the deleted content is gone. It doesn't matter whether the deleted content is the element hierarchy or text and graphics in the document. A recent backup, whether a version of the file that you explicitly saved or one created by FrameMaker's automatic backup, is
       Alex mentioned that a conversion table might help recreate the document's element structure. His comment assumed that a conversion table was used somewhere in the history of this document. Whether or not that is the case, you can create a new conversion table specifically for this document. If you haven't looked at conversion tables yet, a conversion table is a FrameMaker table that describes how to use tagging in an unstructured document to create an equivalent structured document. How successfully it creates the desired structure depends very much on the nature of the tags used in the unstructured document and the desired element structure.
        --Lynne

  • Cubes - how to extract a single dimension and save it in a table

    Hi,
    I am new to the cubes concept, although I've used it several times in the past to analyse the data but never explored options beyond that. using excel, I can get different dimentions from the cube such as customer information, location, etc.
    is there a way to extract (automatically) a single dimension and save it in a table...? e.g I want to pull customer name and revenues only from the cube, how would I do it?
    Thanks

    Hi,
    tparvaiz wrote:
    Hi,
    I am new to the cubes concept, although I've used it several times in the past to analyse the data but never explored options beyond that. using excel, I can get different dimentions from the cube such as customer information, location, etc.
    is there a way to extract (automatically) a single dimension and save it in a table...? Sure, you can do that.
    Say you had a table with many customers, and you were interested in only one of those customers: what would you do? You'd write a query with a WHERE clause that included only the customer you wanted to see.
    A cube is a table with many dimensions. You're interested in only one of those dimensions, so what can you do? You can write a query with a WHERE clause to include only the dimension you want to see.
    e.g I want to pull customer name and revenues only from the cube, how would I do it?Exactly how to do it depends on the table(s), your requirements and your Oracle version. As the others have said, post a little sample data (CREATE TABLE and INSERT statements to simulate what your real table looks like), and the results you want from that data.
    Always say which version of Oracle you're using (e.g. 11.2.0.2.0).
    See the forum FAQ {message:id=9360002}

  • How do I edit RAW photos and save as jpeg?

    HI! I have some RAW photos that I want to edit and save as jpeg. Will the edits compromise the file and how do I then save these edited files as jpegs and will that compromise the files? THANKS!

    What do you mean by “Will my files be compromised“?
    When you edit a photo with iPhoto you’re Original file is preserved exactly as it is, there are no changes made to it whatever.
    will I be able to make a readable disc?
    Why not? But what do you mean by “readable” Readable by who?
    Regards
    TD

  • How to edit XML parsed data and save on iPhone app

    Hi,
    How to edit and XML retrieved data that is displayed on an iPhone app and save again in the same XML file using iPhone SDK.
    In other words I want to change the XML file data or edit and save.
    Thnx in advance.
    Regards
    Amit

    Hello amit,
    No, not at all. Surely you will parse your XML file using the NSXMLParser class. OK! i think i get it now, do you wants to change/modify the value of any tag in the XML file? For that you will be required to parse your XML file using NSXMLParser class, and fill out some data structure (according to the the XML format) do some changes into your data structure, and then write your XML to the file (according to the edited data structure) using the method i told u earlier. This is what my preferred method is, and i am pretty much sure that it is not a bad way to do this at all.
    Hope this clarifies some of your queries.
    Best regards,
    Obaid

  • How do you you create, write, and save files?

    I created a VI to read 8 channels and display the waveform, which it does. But whenever I try to set up a way to save the data it never works. I want it to give me the option to create a new file, then write the data to there, and save it, and then close the file. How should I go about this?

    I have not opened your attachment, yet.
    Before doing so, you will need to decide if you want to write to:
    a) a measurement file
    b) a regular text file, or
    c) MS Excel Spreadsheet
    The method to write to the above are quite different.  Please decide and let us know..
    R

  • How do I get to download and save files again?

    When I try to download or save a file, a file with any format, nothing happens. Only way of getting the file saved is to open it in its designated programme and save it from there. Certain file types can not be saved since they have no programme to open in (like .ies file, for example).
    Changing the file behaviours will not help, it still behaves the same way, i.e. it won´t let me save straight from the browser.

    You really need to provide more information if you expect anybody to help you.

Maybe you are looking for