How to simulate a SYSTEM connection

Hi
I'm connected with / as sysdba.
Is there a way to simulate a connection with SYSTEM User without reconnect.
I have tried alter session set current_schema = SYSTEM but it's not enough.
and set current_user doesn't exists.
In fact my problem is that a trigger work (and I need it) when I'm creating user BUT ONLY when I'm connected under SYSTEM (-; !
Any Idea ?
A.G.

Any Idea ?Why do you expect any of us to debug code we can not see;
especially when you neglect to even post OS name & version or Oracle version to 4 decimal place.
We have NO idea what trigger is supposed to do or what happens when it fails to do what you expect.
My car won't go.
Tell me how to make my car go.

Similar Messages

How to check R3 system connected to BI system

Hi to all,
I am installing BI contents , But before installing the Contents , in need to check which source system (R3) is connected to BI.
Please can any body tell me .
How to check it.
Regards
Pavneet Rana

Hi Rana,
In RSA1 screen select source system option in the modelling area.
Right click on the source system(for ex: D10client100) --> select "Check" from the context menu.
It will display message if there is any thing wrong.
second method
If you have authorizations you can goto SM59 Tcode: drill down the ABAP connections ->check for your source system
double click on it
it will take you to "RFC destination screen" here you need to click on connection test.
IT will display the test results.
Regards
KP
Edited by: prashanthk on Aug 10, 2010 6:05 AM

How to build a form that traps all the IP adresses of the systems connected

HELLO EVERYBODY,
This is Paritosh Sharma,Actually I wanna know How to build a form that traps all the IP adresses of the systems connected.It's really Urgent

6i on the web or client server? Webutil is not certified against 6i so if it's web I'm not sure, but I think it's in D2KWUtil for client-server.

How to verify the Source systems connectivity with BWQ System.

Hi All,
I have diff source systems. And my requirement is to check the source systems connectivity with BWQ (BW Quality sys). please any body tell me the steps how to check the source system connectivity ?
Thanks & Regards,
Manju

Hi Manjula,
If you encounter problems when establishing a connection to your target server, check the following:
A message box appears while performing one of the following actions:
      Setting connection by choosing Apply to local session.
      Testing connection settings by choosing Test settings.
      Creating SAP TSQL objects
If errors occurred, they are displayed in the respective message box.
   Check developer trace files in ST11.
Test connection:
     For RFC related errors, check the RFC connection via SM59
     For database multi-connect errors, check if you can connect to the target SQL Server with the SQL Server Query Analyzer. Also check if the DBCON entries are correct.
Regards,
RK

How To make/configure Broadband connection in Sun java desktop system

Hi all,
I am using sun java desktop system Release 3 solaris 10 version in my sun ultra workstation. I have a problem with it. I can not make broadband connection , in it. so pls let me know how can i make broadband connection with my ADSL modem ?
Thanks
Partha

Try this:
Log into a termina as rootl. (Select failsafe terminal or command login)
To get the name of your network interface driver, type:
/usr/sbin/ifconfig -a You'll see something like this:
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 129.156.226.245 netmask ffffff00 broadcast 129.156.226.255
In my case it is hme0 so I create a file called /etc/dhcp.hme0:
touch /etc/dhcp.hme0If you want to set a hostname, put it in a file called /etc/hostname.hme0 for example:
rm /etc/hostname.hme0
echo myhostname > /etc/hostname.hme0Most broadband providers preconfigure ADSL modems to default to DHCP so if you do this, connect the ultra 10 to the broadband modem and reboot, the ultra 10 should pick up an IP address and be connected to the internet.

System copy : how to backup your rfc connections, partner profiles ...

system copy : how to backup your rfc connections, partner profiles (we20) amd ports in IDOC processing (we21) ???
Hi forum,
if you want to copy your production system to your quality assurance system you can export users and later on reimport
it to save work. That's good.
But how about RFC connections, partner profiles and ports in IDOC processing ? Anyway to export and reimport it later on ?
Thank you for your help.
Kind regards
O.Eggert

Hi forum,
in the meantime I found out how to handle this matter. May be this solution is not very elegant, but it works.
As for RFC-Connections there are several tables beginning with rfc. e.g., rfccheck. But 4 of it only differ from one system
to the next. These are rfcdes, rfcdoc, rfcattrib and rfccheck. What I did is the following : I used
brspace -u sapsr3/<password> -f tbexport -t "RFC3"
and quite simply exported these tables. Then I deleted some of the RFC-Connections, both ABAP and TCP/IP. After reimporting
what I exported before all these destinations were availlable again. As for ABAP the password had to be reentered but this
can be avoided, too. Have a look at transaction /nsecstore. The tables behind it are RSECTAB and RSECACTB, rspectively.
Export it after having exported the rfc* tables and reimport it after having reimported the rfc* tables. Very important : enable
the option "consistent export" !!!
It worked this way although there might be better and more elegant solutions.
As for transaction we20 check sap not 182172.
Hope that I could be of profit to this forum.
Kind regards
Olaf Eggert
p.s.
import command : brspace -u sapsr3/<password> -f tbimport.
Them select what you exported before.

When plugging in an iPad in Apple Configurator, it is not being read under USB Connected so I can't update it. Any ideas on how to get the system to read the iPad?

When plugging in an iPad in Apple Configurator, it is not being read under USB Connected so I can't update it. The iPhoto window opens up and reads the photos on the iPad, so it is connecting to the computer. Earlier today I wasn't having any problems. I have shut down the iPad and the computer and started over, but that didn't help. Any ideas on how to get the system to read the iPad so I can update the apps on it?

Hi, is the problem just to update your apps on your iPad? Here is what you should check. Is the iTunes on your computer updated to the latest version? Does your iPad needs to be updated? Do you have enough storage on your iPad to do the update? On your device is your iCloud back up checked?
Go to Settings - iCloud - Backup/Storage - see if its checked, and try unchecking it before connecting it to the computer.
Please let me know if you need any further assistance.

How to Check source systems in RSA1 and verify that connections are working

How to Check source systems in RSA1 and verify that connections are working ok and how to Check Planning Area have green status.................

Hi,
In rsa1, go to 'Tools' and option 'Manage Source System' - the screens are self explanatory there after. To check the planning areas, go to transaction /SAPAPO/MSDP_ADMIN anc check the status of the relevant planning areas.
Regards
Vinod

How to create file type source system connection

Hi All,
I have to load data from Flat files , but when i checked the source system connections File type source system connection is not present. Please guide me how can i create the same.
Apoorva

Hi Apoorva,
Goto RSA1 -> Source System -> Right Click on File Folder .-> Create -> Logical system Name as FLAT FILE -> Source system name is the description for this source -> Enter.
Once it is created you can right click from that file and check whether it has created properly or not.
When u r moving the objects which are created under this source, the same flat file source should have been created in the target system also. And check for the entry in the target system table RSLOGSYSMAP for the flat file when u r moving the flat file objects.
Regards,
Muthu.

How many deferent ERP systems could we connect to one SRM system at the sa

Hi friends!
Could you tell me please, how many deferent ERP systems could we connect to one SRM system at the same time?
Thanks!

Hi
I worked one srm three backend. But the relationis 1 to many . so you can config many backend system.
What are the problmes you are facing ?
Regards,
Satish Gopal

How to simulate server 2012+clients connetion in virtualbox without internet connection

Hi, I am new to this forum and also not familiar with simulation in virtualbox. I want to know how to simulate server 2012+clients connection in virtualbox without internet connection. I couldn't join the client computer (windows 7 installed) to
the domain (the windows server 2012). I already added the DHCP , AD DS and DNS roles features in the windows server 2012. Can someone put me through?

If you're using VirtualBox you might be better off asking this over on their forum
https://forums.virtualbox.org/, since it's not a Microsoft product. That said I have used it myself, and I think what you need is to ensure you're using the Internal Networking option
http://www.virtualbox.org/manual/ch06.html#network_internal and make sure that both virtual machines have their network card setup with the same name / network ID. Once that's done you
can configure them on the same network range and they should be able to communicate.

Dear frnz, i am doing my prjct in Lview. ie online PQ monitoring. i need to simulate the system with disturbances generated in Lview. so can any bdy plz tel me how to genrte PQ problems in labview. thanks in advance..

dear frnz, i am doing my prjct in Lview. ie online PQ monitoring. i need to simulate the system with disturbances generated in Lview. so can any bdy plz tel me how to genrte PQ problems in labview. thanks in advance..

I work in the power conversion industry and do these types of measurements all the time…
Do you want to just measure power quality or create and measure power quality problems?
What hardware are you using?
Power quality analyzer?
Programmable AC power source?
Fast Transient Generator?
Here is an example of what I do.
To create PQ problems I use a California Instruments AC source set to nominal power for the unit under test. Using Labview I program several transients consisting of fixed and random duration dropouts and surges. I also use a Schaffer Fast Transient Burst Generator to apply high frequency noise bursts directly onto power lines.
For measuring power quality I use a Voltech PM3000A power analyzer and Labview to measure everything from voltage, current, and frequency, to harmonics and %THD
Message Edited by RTSLVU on 07-23-2008 10:31 AM

HT1338 Just got an Apple and totally new to this system please could someone tell me how and where I can connect my HP Photosmart 3310 for wifi? Thanks, Mike

Just got an Apple and totally new to this system please could someone tell me how and where I can connect my HP Photosmart 3310 for wifi? Thanks, Mike

Welcome to Apple Communities
Start the printer, go to System Preferences > Print and Scan, press the + button and select the printer. Your printer and Mac must be connected to the same Wi-Fi

How to do a Generic Connectivity (ODBC) ?

Hello,
Generic Connectivity provide Oracle Database to connect another
database via ODBC. In my case, it is Oracle 8.1.6 which connects
to Sybase Enterprise 11 on Win NT. The Module "Generic
Connection" is installed. I view it by the Oracle Universal
Installer and I have configured the Windows ODBC Manager to
connect to Sybase.
This is what I've done step by step:
1. C:\Oracle\Ora81\hs\Admin\iniths_syb.ora
HS_FDS_CONNECT_INFO = SPS_NACIONAL
HS_FDS_TRACE_LEVEL = ON
HS_FDS_TRACE_FILE_NAME = hs_syb.log
2. C:\Oracle\Ora81\Network\Admin\Listener.ora
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = nacional)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = oracle)
(ORACLE_HOME = c:\Oracle\Ora81)
(SID_NAME = oracle)
(SID_DESC =
(SID_NAME = hs_syb)
(ORACLE_HOME = c:\Oracle\Ora81)
(PROGRAM = hs_syb)
I reload the listener by the following command :
lsnrctl
stop
start
3. C:\Oracle\Ora81\Network\Admin\Tnsname.ora
ORACLE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = host)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = oracle)
hs_syb =
(DESCRIPTION=
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = host)(PORT = 1521))
(CONNECT_DATA =
(SID=hs_syb)
(HS = OK)
I test the tnsname at the prompt command line :
tnsping hs_syb
(It's OK)
4. Database Link
CREATE PUBLIC DATABASE LINK syb
USING 'hs_syb';
5. Test database link
select * from emp@syb;
And Errors occur :
ORA-28509: unable to establish a connection to non-Oracle system
ORA-02063: preceding line from SYB
6. I read again the documentation
http://technet.oracle.com/doc/oracle8i_816/server.816/a76960/hs_g
enco.htm
and I found some tables to be feed with data by the HS_ADMIN
packtage :
This is what I have added :
EXEC DBMS_HS.CREATE_FDS_CLASS ('hs_syb','Uses ODBC Driver')
EXEC DBMS_HS.CREATE_FDS_INST ('hs_syb','hs_syb','SYC Sybase
System 10/11')
EXEC DBMS_HS.CREATE_INST_INIT
('hs_syb','hs_syb','HS_DB_NAME','SYBDATA','F')
(Drop procedure :
EXEC DBMS_HS.DROP_INST_INIT
('hs_syb','hs_syb','HS_FDS_CONNECT_INFO')
EXEC DBMS_HS.DROP_FDS_INST ('hs_syb','hs_syb')
EXEC DBMS_HS.DROP_FDS_CLASS ('hs_syb');
I test one more time the connection,
And I have the same error message as step 5.
7. I put in the initialization file (initoracle.ora) the
parameter
Hs_Autoregister = true (It is true by default and it doesn't
change errors. Is it another parameters for HS ?)
In fact, I don't really understand the notion of "AGENT" for HS
(Heterogeneous Services) in Oracle. Is it something to enable or
is it automatic because the iniths_syb.ora file is in the path
ORACLE_HOME\hs\admin ???
What is it missing for the Generic Connectivity ? Any
suggestion ? Say me what is the wrong step in this process or
what I have forgotten.
Thank you in advance.
Jobar Team

Hello
You're right, step two needs to set (PROGRAM = hsodbc). I understand this when I saw hsodbc.exe in the path ORACLE_HOME\Bin (and at prompt I try agtctl.exe but without sucess, an utility for Heterogeneous Services).
Now when I test the connection I can hear Oracle running something.
This is what I've done step by step (following my previous message)I test with Sybase Entreprise and Sybase Anywhere :
8. C:\Oracle\Ora81\Database\initoracle.ora
I set a parameter in init file and I reload Oracle database :
global_names = false
OR in SQL+
alter session set global_names=false;
WITH SYBASE ENTREPRISE
9. C:\Oracle\Ora81\hs\Admin\iniths_syb.ora
At the beginning my iniths_syb.ora file was wrong then I correct parameters by viewing errors in C:\Oracle\Ora81\hs\trace :
#Using a dsn file generate by the Windows ODBC Manager
HS_FDS_CONNECT_INFO="FILEDSN=C:\sybase.dsn"
HS_FDS_TRACE_LEVEL = ON
HS_FDS_TRACE_FILE_NAME = C:\hs_syb.log
set SYBASE=C:\\Sybase\\ASE
Contents of sybase.dsn
[ODBC]
DRIVER=Sybase System 11
UID=USERNAME
SRVR=SVRNAME
DB=master
10. Test Database link
CREATE PUBLIC DATABASE LINK syb
CONNECT TO USERNAME IDENTIFIED BY SECRET
USING 'hs_syb';
select * from anytable@syb;
ORA-00942: table or view does not exist
[Transparent gateway for ODBC]393330(0,0,1[[]])
ORA-02063: preceding 2 lines from SYB
I try to set parameters in iniths_syb.ora without success :
HS_DB_DOMAIN=SVRNAME
HS_DB_NAME=master
HS_FDS_DEFAULT_OWNER=USERNAME
WITH SYBASE ANYWHERE
11. C:\Oracle\Ora81\hs\Admin\iniths_any.ora
#Using a dsn file generate by the Windows ODBC Manager
HS_FDS_CONNECT_INFO="FILEDSN=C:\anywhere.dsn"
HS_FDS_TRACE_LEVEL = ON
HS_FDS_TRACE_FILE_NAME = C:\hs_any.log
Contents of anywhere.dsn
[ODBC]
DRIVER=Adaptive Server Anywhere 6.0
UID=USERNAME
Integrated=No
AutoStop=Yes
EngineName=SERVICE
12. Test Database link
CREATE PUBLIC DATABASE LINK anywhere
CONNECT TO USERNAME IDENTIFIED BY SECRET
USING 'hs_any';
select * from anytable@anywhere;
In SYBASE ANYWHERE I've got this data
select * from anytable
go
dateini col1 col2
2002-02-01 00:00:00.0000 1.5000 1.4000
In ORACLE I've got
SQL> select * from anytable@anywhere;
dateini col1 col2
01/02/02 1 1
There isn't the decimal.
The reason doesn't like to be 1.4 or 1,4 because in Anywhere and in Oracle It is the same insert "insert into anytable values ('02/02/01', 1.5, 1.4)".
13. Now I try a select of one column
select col1 from anytable@anywhere;
this error occur :
ORA-00904 invalid column name
I am sure that this column exist ! "select * from anytable@anywhere;" and "select count(*) from anytable@anywhere;" are OK.
14. And this doesn't work anymore :
insert into bx_surcharge@anywhere values ('01/02/02',1,2);
ORA-02047: cannot join the distributed transaction in progress
15. Step 6 and 7 doesn't mean to be necessary ? And Where are used parameters of the "ODBC Connectivity Requirements" in the documentation. http://technet.oracle.com/doc/oracle8i_816/server.816/a76960/hs_genco.htm (And How to use Datatype Mapping ?)
So How to successful a ODBC connection (Maybe I forget some parameters) ? For me, using a connection with ODBC is generic and have to work fine with any type of datasource, isn't it ?
Have you got any idea to deal ? Thanks a lot.
Jobar Team

How to create a new connection from SAPGUI to Test drive?

Hi,
I have installed Sap Netweaver Test drive on a linux virtual machine (windows host). The installation was successful and I was able to start the instance (application server and the database), yet I don't know how to create a new connection from my SAPGUI client (7.20) to this server. The static IP address of the server is 192.168.1.160.
I entered the following values for my new connection entry
Description: SAP Netweaver
Application server: 192.168.1.160
Instance number: 01
System ID: DB2
SAProuter: /H/192.168.1.160/S/3201/H/
But it does not work. Any idea about the values needed for creating a new entry?
Thanks in advance,
Dariyoosh

>
Dibya R Das wrote:
> Why are you entering a router string? Can't you reach a box directly from your machine?
>
> Doesn't a ping to that host & a "telnet <host/ip address> 3201" work from your machine to the SAP System.
>
> Remove the router string you wont need if the above works.
>
> - Regards, Dibya
Hello there,
Thank you very much for your answer which solved my problem. In fact there was no need of providing router string.
Kind Regards,
Dariyoosh

How to simulate a SYSTEM connection

Similar Messages

Maybe you are looking for