How to simulate APEX SA03?
Hello my friends,
I want to test APEX SA03 (The SA03 is a pulse width amplifier that can supply 3000W
to the load.) in Multisim power pro.
However, there is no relevant spice model in Multisim power pro, so I download a spice model in web. but it's format is *.LIB. I may open it by notepad.
IF I swap it's suffix for *.cir, would our multisim go wrong?
There is a test circuit for SA03 in sa03.zip
There is SA03.LIB in sa03.zip
Thank you for your help!
Attachments:
SA03.zip 8 KB
Nestor,Thank you!
I have already done according to Tutorial which you offer, but my circuit's results (output) go wrong ultimately, I don't know what is wrong?
Help me check up my circuit,please!
谢谢您!(Chinese)= Thanks you!
帖子被Fangel在03-17-2008 09:00 PM时编辑过了
Attachments:
SA03_test1.zip 588 KB
Similar Messages
-
How to pass apex item value into custom xml for chart or guage?
Re-opening the old thread : Re: How to pass apex item value into custom xml for chart or guage?
Which was not answered.
Roel - Thanks. Its working - but in a semi quotes in the custom XML
<pointers>
<pointer value= '&P5_RUNNING_TOTAL.'
<label enabled="true">
<position placement_mode="ByPoint" x="50" y="15" />
<format>{%Value}{numDecimals:1}</format>
<background enabled="false" />
</label>
</pointer>
</pointers>This question was helpful for us to resolving one recent thread : AnyChart - set Dial axis intervals dynamically?
(Re: AnyChart - set Dial axis intervals dynamically?
Edited by: P.Ranish on Dec 13, 2012 6:23 AMP.Ranish wrote:
Is there any update for this question ???
Edited by: P.Ranish on Dec 13, 2012 3:36 AMNo, And there won't be in the future.
Please stop posting followup's to old threads, if you have a real problem please search the forum first and post a new question with all information
Roel wrote:
Try using &P5_RUNNING_TOTAL. or #P5_RUNNING_TOTAL#Just to make it clear - this will only work if page is reloaded after setting the item values dynamically via AJAX -
DBMS_DATAPUMP - how to simulate commit=N ?
Hi,
I am writing a PL/SQL procedure to export/import data from any database. Concerning the import part, how to simulate using DBMS_DATAPUMP api the command line option COMMIT=N?
Our environment is Oracle 10.2.4 EE.
Thanks for your help,
CyrylHi,
I don't think you can use commit with data pump. COMMIT is an option with standard import (imp), not an option with datapump, hence not available in DBMS_DATAPUMP. You should remember that standard import uses simple INSERT statement to insert the data into the table during import, but, data pump is entirely different.
Salman -
How to simulate HOST command from DB Procedure
Hi,
I'm using Oracle 9.2 database on Win2000 PC.
I need to start .bat file from a database procedure. More generaly how to simulate HOST command that I'm using from Forms6i.
Thanks,Thanks for the reply,
But, I am able to successffuly execute HOST from SQL+
only from the PC where the database is, not from the client. My .bat file is on the server side.
From the procedure I was not able to run it in either cases
Procedure TEST
IS
BEGIN
EXECUTE IMMEDIATE 'host C:\MYBATCHFILE.BAT'
END;
returns ORA-00900 INVALID SQL STATMENT
with EXECUTE IMMEDIATE '$ C:\MYBATCHFILE.BAT' returns Invalid Character Error.
BR, -
How to configure Apex 3.2 in Oracle11gr2 RAC eniv with single http server
Hi All,
1. How to connect Apex 3.2 in oracle11gr2 RAC enironment for the single http server. We dont have any load balancing server here. I Mean to say that I need connect the two nodes from the single http(dad.conf) server.
Is it possible to connect single node database PlsqlDatabaseConnectString with TNSFormat in http dad.conf file
Thanks,
Rj
Edited by: pnr on 5 Sep, 2012 12:54 AMIt is not clear what you want. But yes thats possible. I think the RAC or DB general forum would be better suited. Since it might depend upon how your listener configuration is set up.
Apex (OHS or Apex Listener) is just like any other client in this regard. You can set it up to connect to both rac nodes (load balancing style) or you could set it up to connect to one dedicated apex rac node. -
How to simulate the escalation process
Hi All,
Can somebody tell me how to simulate the escalation process in service?I need to know whether all configuration in my system has done or not done yet....
In my system if there's a problem in customer system for more than 7 hour, then system will detect the problem and send an sms/email to the person responsible in some level (ex: level 1 for SLG 95%), if the customer system still have a problem for more than 10 hour, then system will send an sms to person responsible in level 2, etc.
I want to know how can I simulate this escalation process in CRM service manually. I'm using CRM 5.0. Any helpful answer will be rewarded. Thank you.
Rgds,
Aleluya sap.Hi Aleluya,
You can use date types which will have the times at which the trigger of mail is supposed to happen and once the current date and time is equal to say date type 1 there can be an action setup to send a mail to a particular partner function .
Also you can use status condition for controlling the mails ..
hope it helps
Cheers!
Raj -
How to install apex 4 with Oracle Fusion Middleware Web Tier Utilities
Hi all,
Does any one know how to install apex 4 with Oracle Fusion Middleware Web Tier Utilities ?
I follow the instructions http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/toc.htm but there's no directory called ORACLE_HTTPSERVER_HOME\Apache and ORACLE_HTTPSERVER_HOME/ohs/modplsql/conf/dads.conf
I don't know where's dads.conf file to make change
Please hellp me on this case
Thanks & regardsA little bit odd is an understatement. The first time I found I had to download over 1Gb of stuff to run a simple web server I practically fell over! Hopefully, the Apex Listener team will update it to have backwards compatibility with mod_plsql and we can ignore trying to install Oracle Fusion Middleware Web Tier Utilities...
However, until then the TNS Names error generally means that there isn't a TNS alias set up for the database you have referenced in the mod_plsql dad. If you open up the dads.conf file you should see something like
PlsqlDatabaseConnectString localhost:1521:databasealias
If you then open a command prompt and do TNSPING databasealias you should get a response like this
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = localhost)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = ***)))
OK (20 msec)
If you don't it means you need to add it in.
Hope this helps -
How to simulate writing in flash
Hi - I'm new to flash and just need direction to a tutorial
on how to simulate writing. Basically I want to create a flash file
that has wording appear like someone's typing or handwriting it.
I'm an editor by trade and not completely green to FX, but
completely green to flash.
So if anyone knows of a good place to look that'd be cool.
THANKS!Handwriting is much more difficult than typing. If you can
get away with typing you can either just cover each letter of your
sentance then "uncover" each letter in each frame to achieve the
look of typing or buy a cheap program like:
http://www.swishzone.com/index.php?area=products&product=max
and have the animation done for you. And, no I don't work for
them but I do use that program to make my life much easier when
people ask me to do cheesy effects they have seen on the web and
would take me a long time to animate without the program.
-Cheers -
How to deploy APEX Application within EBS module
Hi Guruz,
How to deploy APEX Application within EBS module, for example I have developed APEX application by using EBS Tables like OA Framework Development in jDeveloper. or anyone can clear my understanding regarding jDeveloper and APEX differences and both are same in relation with EBS Development.
Regards,Hello,
First of all you can delete delete the development environment, by executing apxdevrm.sql script.
You can also wrap your packages.
Regards -
How to simulate server 2012+clients connetion in virtualbox without internet connection
Hi, I am new to this forum and also not familiar with simulation in virtualbox. I want to know how to simulate server 2012+clients connection in virtualbox without internet connection. I couldn't join the client computer (windows 7 installed) to
the domain (the windows server 2012). I already added the DHCP , AD DS and DNS roles features in the windows server 2012. Can someone put me through?If you're using VirtualBox you might be better off asking this over on their forum
https://forums.virtualbox.org/, since it's not a Microsoft product. That said I have used it myself, and I think what you need is to ensure you're using the Internal Networking option
http://www.virtualbox.org/manual/ch06.html#network_internal and make sure that both virtual machines have their network card setup with the same name / network ID. Once that's done you
can configure them on the same network range and they should be able to communicate. -
How to request APEX product enhancements (such as code protection)
Have reviewed and there are posts that go back to at least 2009 inquiring how to protect apex code from being exported in attempt to protect licensed applications.
As everyone is aware, there exists the ability to export an application read-only, but this does not prevent the APEX administrator from the licensee from changing to run and build once the code has been installed by the licensor. While the procedures and functions may be wrapped, there still exist no way of protecting APEX application code which will be the core work of the licensor.
Sure there is the license agreement between the licensor and licensee, but how difficult could it possibly be to add an export option, such as 'export read-only protected', which would prevent modification to run and build at a later time by the licensee?
An otherwise wonderful product still suffers with this major, yet seemingly easily corrected flaw.johnny wrote:
how to request APEX product enhancements (such as code protection)
Re: Apex 4.2 wish list, but apparently failed to read my follow-up:
Have reviewed and there are posts that go back to at least 2009 inquiring how to protect apex code from being exported in attempt to protect licensed applications.If that's the criteria then Pagination Sub-template and table-less layouts and XHTML Validation and Accessibility would have 3 years priority on it.
As everyone is aware, there exists the ability to export an application read-only, but this does not prevent the APEX administrator from the licensee from changing to run and build once the code has been installed by the licensor. While the procedures and functions may be wrapped, there still exist no way of protecting APEX application code which will be the core work of the licensor.
Sure there is the license agreement between the licensor and licensee, but how difficult could it possibly be to add an export option, such as 'export read-only protected', which would prevent modification to run and build at a later time by the licensee?
An otherwise wonderful product still suffers with this major, yet seemingly easily corrected flaw.However, as usual, the needs of corporate lawyers appear to count more than those of developers, as the Statement of Direction says that APEX 4.2 will include features to protect our rights to our non-standard and non-semantic apps. -
Hello,
I'm trying to find out how to simulate cRIO in LabVIEW. I found another thread about this, but I am using the cRIO just as a chassis/DAQ not the FPGA or RTOS, basically just like a cDAQ. I've downloaded and installed NI-RIO, but when I go into MAX to set up a Simulated NI-DAQmx device, I have no option for cRIO, I see cDAQ there. I need to set up with a cRIO-9074 chassis
much thanks!Hello Monse,
That is correct- a RIO is a completely separate standalone device with its own OS that you can cross-compile code for and deploy to (and then communicate with once running). DAQ devices are tethered and controlled by the DAQmx driver on the local machine and can be simulated via this driver. You can certainly develop code without the physical RIO present- just add the model to a LabVIEW project and add the modules you intend to use to the chassis. All of your variables will be present, you just won't be able to deploy the hardware configuration or interface with the RIO. Most RT code can be run on Windows (to validate logic, if not timing), and the FPGA can be simulated, so you should be able to get pretty far without a physical controller.
How do you intend to use the RIO? What aspect of the hardware do you need to simulate for code development? It sounds as though your end goal is to access Scan Engine variables without deploying any RT code or configuring the FPGA at all, is that correct? If this is the case, then all you would need to do to simulate these channels would be to deploy equivalent Network-Published Shared Variables for testing and then re-link the deployed libraries once you have the hardware.
I hope that's helpful- if you could specify what in particular you are trying to achieve at this time (end result and what you are trying to achieve via simulation right now) as well as why you chose this hardware platform, I and others on the forum may be able to offer more specific advice.
Regards,
Tom L. -
How to simulate the underwater and fire effect with Java3D
Hi...My project is a Java 3D game and it need to have underwater and fire effect, but I dont know how to simulate them with Java3D best..Can anyone give me some ways to make them..thank..
You'll have to describe what effect you are looking for. Are you trying to model the surface of the water or do you want your scene to appear to be under the water? A surface can be done similar to a terrain but with transparency added to the geometry. Underwater effects would be tough if you want to distort the view of the scene. You might be able to get away with changing the field of view to be wider or rendering each frame yourself.
For fire effects, are you looking for animated flames? If so there are a few options.
1. Find a series of images of a fire and apply them to an OrientedShape3D through animation. This would be easiest.
2. Build a particle system with fuzzy objects (procedural texturing). This would be much harder but more realistic.
Mike -
HOW to simulate the enter key???
Hi , I have a jTable ,and i want that by leaving a specific
cell ,to perform the same action that the enter key does!
when im leaving my specific cell the following function is being called:
public void editingStopped(ChangeEvent e) {
//here I want to simulate the enter-key's action
HOW to simulate the enter key???
10x in advance
Nir.
p.s. My initial problem was that when i left my specific
cell (the cell is editable combo box), an edited words
which were written by me vanished , and when i get back to that cell the edited word showed again!!!
when i pressed the enter key the edited word were stable in the cell!!!
when I chose a word from the combo evrything was ok!!
so if any one can solve me that problem ill be appreciate.
thanks NiryourActionListener.actionPerformed(new ActionEvent(yourCell))
I am not sure about the constructor of actionevent.
you could try if setText(getText()) produces a good result -
How to simulate ModelState.IsValid in C# winform application for any model validation
in asp.net mvc the people validate model this below way
using System;
using System.Data.Entity;
using System.ComponentModel.DataAnnotations;
namespace MvcMovie.Models {
public class Movie {
public int ID { get; set; }
[Required]
public string Title { get; set; }
[DataType(DataType.Date)]
public DateTime ReleaseDate { get; set; }
[Required]
public string Genre { get; set; }
[Range(1, 100)]
[DataType(DataType.Currency)]
public decimal Price { get; set; }
[StringLength(5)]
public string Rating { get; set; }
public class MovieDBContext : DbContext {
public DbSet<Movie> Movies { get; set; }
if (ModelState.IsValid)
db.Movies.Add(movie);
db.SaveChanges();
return RedirectToAction("Index");
now guide me how could do the model validation same way in any c# win and webform application ? guide me in details. thanksthis question has been cross posted to forums.asp.net and to stackoverflow:
"How to simulate ModelState.IsValid
in any application for any model validation"
"How
to simulate ModelState.IsValid in C# winform application for any model validation"
Gerry (Lowry) Ability Business Computer Services ~~ Because it's your Business, our Experience Counts!
Maybe you are looking for
-
I'm trying to add the CD Ben Howard - I Forgot Where We Were to iTunes but I keep getting Error Occurred While Converting the file "Track Name". An Unknown Error Occurred (-50). Could someone please help?
-
Error in applying the patch to OBIEE 11.1.1.6.8
When I try to apply the opatch apply command, below is the error I am getting. I am not able to find the resolution for this. I am not understanding the problem by looking at this. optach failed with error code 1 C:\Middleware\Oracle_BI1\16094198>
-
How do I restore my Windows XP to a larger internal Mac drive?
I just upgraded my MacBook Pro internal hard drive but still have the Windows XP on a FAT32 partition on the old drive, which I now placed in a USB 2 external case. I would like to put Windows XP on the internal Mac drive so I don't need to carry aro
-
Generating alphabets in Message Mapping
Hi, Can someone please suggest how can I generate alphabets in message mapping during runtime. Regards John
-
Dear friends, i need the report for login date and time of user ( for 1 month ) and How much of time the user used per day .. that details i need . Pls help me out Lee