How to simulate asset transaction in future

Hi Friends,
can someone advise how to simulate posting of transaction i.e. in next year? I mean in asset explorer simulation is not possible unless you have the period opened for posting in FI.
Is it possible without opening the period i.e. for year 2010 ? Or is there any other way how to calculate future depreciation amount for example for year 2010 with subseq. acquisition in 11/2009. Do hope there is some program in SAP, or do you know some external tool i.e. via Excel...?
Thank you for answers!

Hi,
Go to AWO1N. Give your asset details. Then on the top click on "Swithon Simulation" (Icon with three blue dots and two red dots). Then in the planned values tab, down you can find the same type of icon "Trans.Simulation" Click on that. It will take you to Simulate asset transaction. There you can give the details and simulate the depreciation.
Regards
shankar

Similar Messages

How to update Asset transactions

Hi FI Experts,
I've been updating a asset by providing values for ANLC table during asset creation. The asset summary is getting updated properly for the fiscal year. I can see them under Planned Value tab..
But Transactions is not updated.
Could anybody help, which table contains the entry for asset transactions. Can it be updated during asset creation?
Thanks & Regards,
Ravi

Hi Eli,
I don't find the BAPI FIXEDASSET_CREATEINCLVALUES in the system. Could you please provide me the correct BAPI and if possible an example on how to create a reference asset.
As I mentioned, I'm using Z Object, which is a copy of LAFA_ASSET_CREATE. I'm providing the values for ANLC using the FM AMSP_ADD_ENTRIES_TO_GLOBAL_TBS (available in LAFA_ASSET_CREATE). So the values for the asset is properly updated. I can not pass values for tables ANEK and ANEP using the same FM i.e. AMSP_ADD_ENTRIES_TO_GLOBAL_TBS so I'm using FM AMBU_APPEND_LINES_OF_ITAB_AC to update values of ANEP and ANEK. But the values for ANEP and ANEL are not getting updated. If you can suggest something here, it would be great help.
Regards,
Ravi

How to make a photo STAY in the assets panel for future use for In browser editing?

How to make a photo STAY in the assets panel for future use for In browser editing?
When I delete a photo from a page, it does not stay in the assets panel. My client uses in browser editing daily. Once a week he changes a photo just for a day, then needs the previous photo to replace it. The original photo is not in the asset panel (or folder) for him to choose.
When you upload a photo, it has an arrow in the asset panel. How do you use this as an asset?

Sure ... right mouse click on your page and choose 'Exclude Page from Menus' :-)

Integration with MM how the asset transaction type is triggered during MIGO

Hello everybody,
Do you know how SAP triggers the asset transaction type during MIGO when Asset is purchase with MM?
Is there a customizing transaction to set up the link between the movement type used in the MIGO and the asset transaction type during the receipt of the asset?
Thank you in advance
Regards

Hello,
This is maintained in FI-AA Spro - Financial Accounting - Asset Accounting - Transactions - Specify Default Transaction Types
For example for GR (MIGO), the accounting transaciton is called "Acquis. from goods receipt w/o affiliated company" and the default FI-AA Transaction type is 120.
Hope this helps!

Error in Asset Transactions Report in ECC 6

Hi Friends,
We have upgraded from ECC 4.7 to ECC 6.0 in Nov 2007.
In Asset Transactions Report (S_ALR_87012048) the Depreciation column is displaying Zero Values for individual line items after November 2007 (ie for Assets posted after Nov, 07).
We posted the same to SAP and they are saying that since New Depreciation Calculation has been activated, Depreciation on Individual transactions will not be calculated.
SAP has quoted the following note:
As per note 965032 point 4d under the header 'No depreciations ontransactions' which states:-
.... if you use the new depreciation calculation, the system no longer saves depreciations on transactions in the line items. Exceptions to this rule are - proportional value adjustments in the case of retirements or retirement transfers, since these must continue to be calculated at single transaction level.
My questions are:
1.Even after this the report with depreciation values as Zero can be grossly misleading (other reports are showing correct values). Is it correct?
2.If what SAP is saying is correct, then How is this New Depreciation calculated? If anybody has an idea, please explain...
I hope i am clear in stating my requirements.
Thanks in advance.
SK

Hello,
Can you please look in the /put/log directory and copy the error from the appropriate log file. You should find a log file with a name similar the to upgrade phase that is causing the error.
Thanks
N.P.C

Asset transaction type default wrongly

I go to t-code ao76, for asset transaction type 350, there is no tab called "posting type" , thus i can't find gross/net indicator.
but in other system, i see posting type indicator.
any one know how to solve this problem, now any transaction type I created under ao76 does not have posting tab

I already check in this way, by this way, it will not allow you to modify standard transaction type 3**, all my transaction type under transaction group 30 is missing posting type, none of the four radio button is selected in the expert view.
Is there any note to repair transaction type group 30? I find some notes, they suggest using Zcorrection prgram and transfered from client zero, but none can treat group 30.
thus I expect any solution, may be it needs other configuration?

Do not update in qty for asset transaction

Dear all,
the system update the qty field in asset master data when transaction take effects. But there is any why that qty field in asset master data do not update after transaction takes place like when transfer from one asset "a" to asset "b" with t code ABUMN.
asset a with qty 1 and asset b with qty 2 in the master record,
when transfer from a to b the system must not update the qty field in asset master data that the system updates to 3.
How can the system do update qty ?????
regards

Hi,
This is the standard behaviour of the system.
If a transfer takes place from asset X to asset Y, then the system adds the sending asset's qty to receving asset's qty, only if the both UOM are same.
Often users create an asset master with values in qty fields also, but that qty field should be blank only, since the qty will be added to it through asset transaction only.(if earlier qty is 0 and transaction qty is 1, then it would be 0+1=1)
In your case you might have created your second asset with 2 qty and transfered 1 qty from sending asset, so the system added the both quantities in receiving asset. ( 1+2=3), as you are aware of this.
Thanks,
Srinu

LSMW for t-code ABSO (Create Asset Transaction)

Hi All,
I'm new to LSMW.
I get the requirement to create LSMW tool using t-code - ABSO(Create Asset Transaction).
Could anyone provide some idea/ guide how I perform recording while the
- transaction type A and B restrict posting to depreciation area 04 only.
Is there any way to verify / do it? Please kindly advise.
Thank you!

Hello Little
I know this is a very old thread. I am in a similar situation as you were. We have multiple transaction type, each calling specific depreciation areas only. Thus my input file has, for each asset a Depreciation amount, special depreciation etc, based on the transaction type. When I create the LSMW, it maps the target fields (like NAFAV, NAFAL etc) to only one depreciation area. Thus all the values during running the file are wrong.
Can you tell me how you managed this?
Like you I am also new to LSMW!
Thank you

How to simulate blocking ?

how to simulate blocking.?
can any one provide script ..

As far as I know, you can't simulate blocking. The easiest way to test if you code handles blocking appropriately is what Ed is suggesting, which is to open another connection and fire commands that will actually block whatever you want to have blocked.
On that other connection, you should execute a statement that acquires the locks that you want simulated. The trick is to run that statement within a transaction and to not finish the transaction until you have completed your test. After that, you can rollback
the transaction (or sever the connection) or commit it.
The below example will keep one row exclusively locked for 20 seconds.
BEGIN TRANSACTION
UPDATE my_table
SET my_int_key = -my_int_key
WHERE my_int_key = 5
WAITFOR DELAY '000:00:20'
ROLLBACK TRANSACTION
Gert-Jan

How to find the Transaction Code??

Yeah, How to find the transaction code?
Lets say suppose I know the path of what I want to do, for example I wanna assign chart of deprecition to a company code. The path will be " SPRO - financial accounting - asset accounting - organizational structures - assign chart of depreciation to comp code".

Where can I find the transaction code for this path??
FYI : The transaction code for this particular example is OAOB

create a SQ01 quickview query for table TSTC or, even do a join for TSTC&TSTCT
TSTC - Transaction codes
TSTCT - Transaction codes texts
if you want to see where some of the transactions are in the hierarchy you can use transaction "search_sap_menu" or SPRO and use the binocular button to search

Problem about creating asset transaction type

I created an asset transaction type with AO76 to deal with the apportionment of asset expenses which was created in the year before yesteryear.But the user demands an account assigned to the transaction type .Then I checked the configuration.It seems t-code AO85 can only realize the relationship between asset classes and accounts.
So what should I do to realize this? Thanks!

or if you still want to achieve it. Go for substitution. make the Gl account the substitutable field and then define a rule saying that, if the transaction type is ' ', then the gl account is ' '
Regards
anantha

How to find what transaction an user was running for a given period

hi
could anybody tel me
how to find what transaction a particular user was running for a given period
in the past.............

Hi,
U need to findout the list of Tcode excuted by SAP user
1) Tcode: ST03N
2) Select Expert Mode option
(there u find Server Host name & Today)
If u select Host name u find DAY/WEEK/Month (same thing will in Today option)
3)Now u need to select the option of DAY,WEEK etc.
Now u can find in two ways
1) Transaction profile (Standard / EarlyWatch)
2) User (user profile)
If u select the Transaction profile
Under these u find the option of Aggregation----application/package/tranasation etc.
I hope these will help u to findout.
Regards
ASR

How to take unreconcilled transactions report for a date range ?

hi all,
How to take unreconcilled transactions report for a
data range ?
we have taken unreconcilled transactons from
external reconcillation using filter option mentioning
range of dates,But when we take print out using PLD,
it showing unreconcilled transactions for all dates.
But our client requires it as a standard report from SAP ?
Our client is using SAP B1 2005B PL39.
Jeyakanthan

Hi
Financials -> Financial Reports -> Accounting -> General Ledger.
In the 'Display' dropdown select, 'Unreconciled' .
Hope this should help you.

How many times a transaction has been executed

Hi All,
I have to make a list on how many times certain transactions have been exectued last year.
Does any of you have a idea on how to get this list?
tried already ST03 and STAT but without satisfying result
We have R/3 4.6B.
Regards,
Rod.

hi,
use STAD transaction.

How to configure global transaction wthin Oracle AS JMS and Oracle JMS

How to configure global transaction if I take a message from Oracle JMS(AQ) and send it to the Oracle JMS?

Which version of OC4J are you working on?
In OC4J 10.1.3.x, presume your OC4J JMS listens messages via MDB which uses a resource adapter as a message listener. The resouce adaper could be the generic JMS adapter deployed in OC4J as the default.
Resource adapter configuration to support MDBs is included in the standard ra.xml file, which lists the message listener types that the resource adapter supports.
The MDB developer or deployer configures the MDB in the ejb-jar.xml file, through a <message-driven> element.
In addition to above, configuration in the ejb-jar.xml file specifies whether an MDB uses transactions.
1) The <transaction-type> subelement of <message-driven> in ejb-jar.xml has a value of Container, and the <trans-attribute> subelement of <container-transaction> (under the <assembly-descriptor> element) has a value of Required. In this circumstance, if there is an imported transaction, then message delivery and related work are performed within that transaction. If there is no imported transaction, OC4J creates a transaction, and message delivery and related work are performed within that transaction.
2) The <transaction-type> subelement of <message-driven> in ejb-jar.xml has a value of Bean. In this circumstance, the MDB manages the transaction. If a transaction is imported, OC4J will suspend it before the message delivery method call to the MDB, in order to avoid conflict.
Message delivery is not transacted if the <transaction-type> subelement of <message-driven> in ejb-jar.xml has a value of Container, but the <trans-attribute> element has a value of NotSupported. If there is an imported transaction in this circumstance, OC4J will suspend the transaction before the message delivery method call to the MDB.
Details could be found from OC4J Resource Adapter Guide.

How to simulate asset transaction in future

Similar Messages

Maybe you are looking for