How to sincronize with itunes an 3G iphone that has the same name as the new 4S

I've just boght a new 4s iphone to substitute my old 3G so when asked by itunes I didn't change the name of the new iphone. Now I have two I phones with the same name and the old one is not able to sinchronize with I tunes any more. It's not even able to restore it self so I could change its name to use it under a different Iphone, does any one have any idea of what can I do to reutlize it,. I'd much appreciate your advise, thank you,
León Nik

It's easy to rename each unit. When you connect your iPad and it syncs, the unit will appear on the left of the iTUnes screens just click on the unit there and you can rename it. You should do this immediately so you can see which unit was backed up by it's name. You can sync as many decices as you want in one iTunes library and you can even share Apps as long as you're going to sync both from teh same iTunes account. My household has 2 iPad 2s and we share our apps, and we also share downloaded books, magazines, music, etc.......

Similar Messages

How can i unlock my granddaughter's iphone that one of her friends changed the password on and locked it? the phone is saying connect to itunes.

how can i unlock my granddaughter's iphone that one of her friends changed the password on and locked it? the phone is saying connect to itunes.

If disabled because of a passcode, and you have not synced AFTER setting the passcode, you will have to force the phone into recovery mode & restore it as a new device. All data on your phone will be erased:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, setup as "new" will be your ONLY option.

How to put two files with the same name into the same folder?

How can I put two files with the same name and the same extention into the same directory?
Is this even possible?
Thanks in advance.

Are you sure? I would be very surprised if that was the case.
How does the computer/filing system differentiate the files, if not by their names?
How do you tell the computer which one you want? (On the command line.)

NewBie Q : How to make one clickable shape jump to a slide with the same name of the shape (button c_1 to slide c_1 f.e.) .

I made some clickable placeholders on a masterslide
Then : a new slide based on that masterslide
and want to use one script or shared action that says "on success jump to another slide with te samen name as the button...)
Sorry for this unusual semantic language.
But already thanks for answering!
Lucas
PS I'm using a trial version to try out a branched interactive scenario. A choice of a user leads tot anothe slide with a video reaction followed by other choices,...)

Sorry, but I'm not a native English speaker, and I have some problems with your question.
The only interactive object that is possible on a master slide is a shape button. What do you mean by a 'clickable placeholder'? Why I like Shape Buttons - Captivate 6! - Captivate blog explains possibilities with shape buttons. Maybe the idea to have such a shape button on a master slide is not the best, because you cannot control objects on master slides since they do not have an ID. You cannot give a name to a shape button on the master slide, which means the scenario you are talking about is just impossible?
Moreover: Captivate doesn't like to have the same name/label to be used for different objects. There are some exceptions, you can have an advanced action with the same name as the interactive object that is triggering that action, provided you label first the interactive object before labeling the action. With "script" you probably mean an advanced action?
If you tried to explain what you want to do as detailed as possible, maybe I could propose something. You'll see that my blog is focussed on advanced and shared actions. One other puzzling sentence is 'same name as the button'? Are you really talking about the name of the button or about the label ON the button?

After upgrading my 3gs to ios5, I get 2 copies of pictures synced from my computer, 1 in the Photo Library and another in a library with the same name as the folder I put the pictures in to put on the phone. Any ideas why?

When syncing pictures from my computer to my I-Phone I get 2 copies of the pictures, 1 in the Photo Library and another in a library with the same name as the folder I put pictures in to put on the phone. This started after I upgraded to ios5. I have tried re-installing I-Tunes. I have not reset the phone. My main concern is the amount of memory pictures take up on the phone. It's not a problem now but could be in the future. Any Ideas on why this happening?

It has always been this way. it was never different. This is how the iphone handles photos - always has.
There are NOT two copies, There are simply two ways to access the very same photos. All synced photos will ALWAYS be under Photo Library ( you can look at all photos at once this way or do a slideshow of all photos). Those very same photos can also be accessed from the individual folders so you can show or slideshow just that folder.
Just as a book can be in the library and in the fiction section, there is only one book/photo.

What can i do about my iphone that has a blue tint to the screen when i have sunglasses on?

what can i do about my iphone that has a blue tint to the screen when i have sunglasses on?

That sounds like an issue with the sunglasses and possible polarization...there is nothing that you can do to offset that on the iPhone itself.

Aperture adds the same name to all new locations, how do I delete the name but not the address?

Aperture adds the same name to all new locations, how do I delete the name but not the address?

It's easy to rename each unit. When you connect your iPad and it syncs, the unit will appear on the left of the iTUnes screens just click on the unit there and you can rename it. You should do this immediately so you can see which unit was backed up by it's name. You can sync as many decices as you want in one iTunes library and you can even share Apps as long as you're going to sync both from teh same iTunes account. My household has 2 iPad 2s and we share our apps, and we also share downloaded books, magazines, music, etc.......

Dng and tif file with the same name, in the same Lightroom folder

If I have both a dng and tif file with the same name, in the same Lightroom folder, I can only see and access one of them. Is there a setting I can change in order to see both of them?

If you can only see one of them, which one can you see?
Was the DNG and the TIF imported at the same time?
How are you trying to "access" the files?
The more details you can provide, the more likely it is that someone will be able to help you.

LabVIEW 2010 App Builder: Registry editor has issue with keys of the same name at the same level in registry tree

This is a bug report for an NI application engineer. Please file a CAR.
In a LabVIEW 2010 project, create a new installer build and go to the Registry editor.
Enter some keys like the following
Click OK to close the installer wizard.
Now reopen the build specification and go to the Registry editor. The registry editor comes up blank and non functional.
I believe the registry entries are still written when the installer executes, but you cannot edit the registry any further in LabVIEW 2010. This was not an issue in LV 2009. The issue seems to stem from having two keys with the same name at the same level in the registry tree (in this case, the two "Test" keys).

Hi sensor_daniel,
This was reported to R&D (#305026) for further investigation.
Thanks for the feedback!
Have a great day,
Chris V
Applications Engineer
National Instruments

I'm trying to put movies onto my hard drive but i can't put the files with the same name onto the hard drive , finder won't let me change the name

I'm trying to put movies onto my hard drive but i can't put the files with the same name onto the hard drive , finder won't let me change the name. What am i doing wrong?

Make a new folder and put them in that different folder. Then the names can be the same as others already on your drive.

How do you force instances with the same name on the same layer to update?

Maybe someone can tell me why flash doesn’t redraw
components’ x,y positions if they have the same instance name
and are on adjacent frames? (movieclips work fine, just not
components) If I have a button on frame 1 and a button on frame 2
both with the same instance name but different locations on the
stage, frame 2’s button doesn’t show up in the position
I placed it, it stays at the position of frame 1 but still has the
properties of frame 2’s button. The label changes and
everything. If I stick a button on a frame in between and give it a
different instance name there is no problem. I thought it might be
the style manager bug
http://www.gskinner.com/blog/archives/2007/12/cs3_component_b.html
but it didn’t seem to affect. This happens for textareas too
and probably all components although I haven’t tried them.
I’ve tried using drawNow() and validateNow() with no luck
either
http://www.adobe.com/devnet/flash/articles/creating_as3_components_pt3_05.html
Thank you!
// put this on frame 1 along with a button on the stage with
instance name: b
function doit(event) {
if (currentFrame == 1)
gotoAndStop(2);
else
gotoAndStop(1);
b.addEventListener(MouseEvent.CLICK, doit);
stop();
// put another button on frame 2 along with this code and
also make it’s instance name: b but move it so it’s not
in the same x,y coordinates as the button on frame 1
stop();
Something possibly related. I have a movieclip on a layer,
one instance with name “a” on frame 1 and one instance
with name “a” on frame 2 and it has event listeners
inside it that update something on the movieclip. Unless I put the
movieclips on separate layers the event listeners won’t reset
each frame. (example: a button with a tooltip onmouseover that you
want to change the text of from frame 1 to frame 2) You’d
think if they were on separate keyframes at least but no, they need
to be on separate layers too.
I want the movieclip to update each frame. Any ideas?

instances (whether components or not) with the same name may
or may not be the same instance. it depends upon how they were
created.
for example, if you create an instance on frame 1 of your
main timeline, give it an instance name and then create a keyframe
on frame 2, the two instances will be the same.
but if you create an instance on frame 1 of your main
timeline, give it an instance name and then create a blank keyframe
on frame2 and create another, what you think is a duplicate,
instance and give it the same name, it will be a different
instance.

I tried to make another account on my school Macbook Pro, made the Admin, account with the same name as the one I was using, deleted it and then all my desktop data is gone.

So, the problem is,
I used these school Macs right? They're school handed and stuff. Then one day I decided I want admin so I do this thing where I "reset" everything on the Macbook using this Video (at the bottom) http://www.wikihow.com/Reset-a-Lost-Admin-Password-on-Mac-OS-X
Then I do it, it takes me to the new User. That's not what I want so I shut down, then made an account with the same name as my current account (let's call it Y). Then I delete Y on purpose. I deleted it because I didn't want my school to know I had this account. Realise I wanted it again so I made an account, let's call it X then when I have X I deleted Y. Then I realised my AirDrop name said X so then I made a new account, this time let's call it Z, with Z I delete X and then I deleted Z because I don't want my school to know I have Z but then Z is also the same name as my main/current account. Somehow or something I delete my current account leaving me with Z. Now I can see my account and stuff but don't know how to restore it.
Picture will be provides later.
PLEASE PLEASE PLEASE HELP ME. I HAVE SCHOOL TOMORROW AND I DON'T WANT MY PARENTS TO FIND OUT.

It is a bad idea to hack computer passwords when you don't own the computer
Good luck with the school and the parents.

Multiple lovs with the same name on the same module/form

I've noticed that in this case in a generated fmb LOVs get renamed so that first remains with the same name, next one gets 1 at the end, next one 2 and so on.
What I haven't found yet is the rule by which they are sorted, i.e. which one gets 1, which one 2, which one remains with the same name...
I've tried with the usage sequence of the LOVs but that seems to have no influence.
Anyone has any clues?

I have the same problem
an external firewire drive "232 GB" is gaining an extra, sequentially numbered, mountpoint in /Volumes/ each time it is unplugged and re-plugged.
This is a bit of a pain as Xtorrent is downloading to a folder on this drive and so, whenever it is unplugged, I have to either;
restart all the downloads or,
before launching xtorrent, go into /volumes/ and delete the last mountpoint (so the system automatically adds the one Xtorrent is expecting)
just noticed you're in Sheffield too, maybe it's a local problem....
no idea what's causing it

I gave my wife my old iPad and it has the same name as my new one. How do I change the name of the old one to allow to have different content on our iPads?

I gave my wife my old iPad when I bought an iPad 2. Both devices have the same name. Will this affect backups of our different contents?

It's easy to rename each unit. When you connect your iPad and it syncs, the unit will appear on the left of the iTUnes screens just click on the unit there and you can rename it. You should do this immediately so you can see which unit was backed up by it's name. You can sync as many decices as you want in one iTunes library and you can even share Apps as long as you're going to sync both from teh same iTunes account. My household has 2 iPad 2s and we share our apps, and we also share downloaded books, magazines, music, etc.......

Why won't my new iPad sync thru wifi with iTunes? My iPhone 4S has no issues.

Please help? I have set iTunes to allow sync via wifi?? I'm stuck

I find WiFi syncing can be a bit flakey and unreliable at times. I have my own issues at times, but usually, restarting everything will allow me to sync over WiFi again..
Have you tried rebooting your iPad - not while you are connected to the computer with the cable. Unplug the iPad before you reboot.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Try again after you reboot. You may still have to sync with the cable one more time in order to try to set up WiFi syncing again.

How to sincronize with itunes an 3G iphone that has the same name as the new 4S

Similar Messages

Maybe you are looking for