How to skip authorisation for infotype when using dynamic selection ?

Hi folks,
I have a problem here.
When im using dynamic selection screen, i cannot skip authorisation for subtypes of an infotype. Eg. if my record for 0185 have records that do not have authorisation for the subtypes. Dynamic selection will filter away this record and will not get me into the Get Peras as id i use to run has authorisation configured. IT will skip out of Get Peras.
However, if im not using dynamic selection screen, i will use the normal pnpce fields, i will be able to get the record, as i do my authorisation check using function module in the get peras, and i did not declare 0185 in the infotypes.
May i know if there is any solution to this problem as dynamic selection screen is a standard...
Thanks,
lihui

hi,
however i cannot skip authorisation for the whole pernr as i need the authorisations for the processing reports.
Currently the case is like this..
i have a authorisations for infotype 0185. i have 2 subtypes records such as ZA and ZB. the user does not have authorisation to read ZB but has authorisation to read ZA.
However, when use dynamic selection, it will skip out the pernr.
If the pernr 0185 records has only ZA subtype but no ZB subtype, it will not skip this pernr when using dynamic selection.
Anymore idea how to overcome this?

Similar Messages

How to keep files from disappearing when using Dynamic link to AE in PremProCS4?

I am at my wits end here and hope someone can offer a solution. I use Dynamic Link in PremProCS4 to link a clip in my timeline to AfterEffects. I follow the instructions in my book and everytime I close my files and reopen..I loose the clip along with the effects...I get the place card instead. Here are the steps I do as per the Adobe Classroom in a Book Explains:
I double click on my .MTS file in the Project Board so it comes up on my Source Screen.
I take select the part of the clip I wish to use in my timeline and drag it to the appropriate spot on a video layer.
I then right click the "clip" and select "Replace With After Effects Comp"
I then name the new file. name or whatever.aep
It opens in AE
I then apply two simple effects... keying and a cartooning effect I use from NewBlue Cartooner.
As instructed I then go directly back to PremPro and do a "render" by pressing the Enter Key. This does not work since I only get a yellow bar above the clip instead of a red on???
So then I save the PremPro project and close it then go to the AE project, save and close it.
When I reopen PremPro the file has a place card in it and in AE it says I am missing a file.
I have tried many different ways to do this process including re-importing the .MTS file.
I can close PremPro and reopen it and all is the same as long as I don't close the AfterEffects project. Once AE is closed it looses the file. On a note here I keep all my computer source files in the same place and it never changes plus they are in my PPro Project as well. I never change the names so this isn't this reason.
Is there a tried and true method to select a piece of clip in the video layer in Prem Pro and add effects from AE and not have it misplace the files?
Thanks Kate

Hi Curt, and thank you for taking the time to respond.
Its odd how I've been trying to figure this one out for a long time and I tried your suggestion but it didn't make any difference..darn.
In the AE forum they say this is quite common and no one really knows why...double darn.
So I went back with a fresh mind this morning and tried something else..and it worked...so far anyway.
So far I figured it out... I guess I just needed to ask the question and write it all out to help get my brain working in the right direction:
Since the normal process to do this doesn't work for me ..and apparently many others..here is the solution for those of you having similar issues.
In PremPro select the desired clip you wish to place effects on
Rename it and save
R click and "Replace with AE composition"
Name new file
You will see three files pop up in AE in the project panel.
The original source clip .. in my case.. shows an icon that lets me know it isn't the true file.
Highlight this file with a click and then go Ctrl H (for PCs)
The group of computer source clips you use for your project will come up.. double click on the original clip you had imported into your PPro project.
The source file icon in AE will change to an icon that denotes the true file...save
Go to your still open Ppro project and make sure it carried the effects over..save.
Now you can save and close the AE project.
So for this works for me today and I hope this helps anyone else dealing with a similar issue.
Thanks.

How to keep files from disappearing when using Dynamic link to AE from PremProCS4?

I am at my wits end here and hope someone can offer a solution. I use Dynamic Link in PremProCS4 to link a clip in my timeline to AfterEffects. I follow the instructions in my book and everytime I close my files and reopen..I loose the clip along with the effects...I get the place card instead. Here are the steps I do as per the Adobe Classroom in a Book Explains:
I double click on my .MTS file in the Project Board so it comes up on my Source Screen.
I take select the part of the clip I wish to use in my timeline and drag it to the appropriate spot on a video layer.
I then right click the "clip" and select "Replace With After Effects Comp"
I then name the new file. name or whatever.aep
It opens in AE
I then apply two simple effects... keying and a cartooning effect I use from NewBlue Cartooner.
As instructed I then go directly back to PremPro and do a "render" by pressing the Enter Key. This does not work since I only get a yellow bar above the clip instead of a red on???
So then I save the PremPro project and close it then go to the AE project, save and close it.
When I reopen PremPro the file has a place card in it and in AE it says I am missing a file.
I have tried many different ways to do this process including re-importing the .MTS file.
I can close PremPro and reopen it and all is the same as long as I don't close the AfterEffects project. Once AE is closed it looses the file. On a note here I keep all my computer source files in the same place and it never changes plus they are in my PPro Project as well. I never change the names so this isn't this reason.
Is there a tried and true method to select a piece of clip in the video layer in Prem Pro and add effects from AE and not have it misplace the files?
Thanks Kate

Hi Mylenium, and thank you for taking the time to respond.
Your idea of renaming comps got me to thinking..hmm.
So I went back with a fresh mind this morning and tried something else..and it worked...so far anyway.
So far I figured it out...
Since the normal process to do this doesn't work for me ..and apparently many others..here is the solution for those of you having similar issues.
In PremPro select the desired clip you wish to place effects on
Rename it and save
R click and "Replace with AE composition"
Name new file
You will see three files pop up in AE in the project panel.
The original source clip .. in my case.. shows an icon that lets me know it isn't the true file.
Highlight this file with a click and then go Ctrl H (for PCs)
The group of computer source clips you use for your project will come up.. double click on the original clip you had imported into your PPro project.
The source file icon in AE will change to an icon that denotes the true file...save
Go to your still open Ppro project and make sure it carried the effects over..save.
Now you can save and close the AE project.
So for this works for me today and I hope this helps anyone else dealing with a similar issue.
Thanks.

HR ABAP How to Write BDC For Infotype 0586

Hi Experts
Can Any One tell me how to write BDC for Infotype 0586 and also 585.
If we enter into the maintaining Screen, the lines in the Screen will dynamically changing depending on the values.
When I am doing recording , If I press page down after entering values in top lines, the lines are changing and the records are not updating Correctly.
I need to write BDC to Create Change.
Can any one please help me in this regard?
Thanks in Advance.
Regards
Avinash.

http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
http://www.google.co.in/search?hl=en&q=SAPBDCtable+control&meta=
http://www.sap-basis-abap.com/abap/handling-table-control-in-bdc.htm
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm

How can we get ADFSecurity work when used in OC4J, OID and OAM?

I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?

Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal

How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one?

Based on http://forums.adobe.com/thread/1308132?tstart=0 I decided to add each question seperately:
Hello, I'm quite interested in buying Lightroom 5.2. I tried the RC which ran out now. Yet, I have a several questions that I can't really find good conclusive answers to, that I'd like to get answered before buying LR. Please don't write maybe like this or that (assumptions), since I don't want to start my whole workflow and then realize that I have to change everything around, so please answer, if you know for sure that something works and you are, preferably, using that method too.
This is the biggest question, where I mainly want a conclusive answer: How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one of them, using the same photos for editing. I won't use DNG. Details: I mainly use my older MacBook Pro, but would like to be able to use my PC as it's way better (Specs: i5 2500K, 16GB RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HDs that I could use, one for Backup and one for the actual Photos/Edits. I'll probably need to use it as my internal HDs are quite full, and I can't just delete stuff or move it to an (Developer programs, Lossless music, etc.).
Based on this, how do I back up the whole thing e.g. Photos folder (all photos and edits, and preferably presets too)?

I believe it should be possible to work cross-platform without having to relink files each time, or without having to keep exporting/importing the catalog, by keeping the single catalog and the image library on the one external drive which is then switched between systems as needed.
Obvious first requirement is an external drive that is formatted in such a way (e.g FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalog AND the images parent folder are both established at the same level in one overall parent folder, then it should be possible to take advatage of Lightroom's ability to use relative paths rather than absolute paths to detect the images, no matter if the drive is named (Mac) or lettered (PC). This is how "export as Catalog" works, i.e. it creates a "package", aka a parent folder, containing the catalog and a replica of the exported images folder hierarchy alongside the catalog. Take that "package" to another system (same OS or not) and "it just works" even if the drive letter is different or the OS is different....because the relative path from catalog to images is still the same.
I haven't tested this cross-platform (though I have between different PC systems with different drive letters) so for me it's still just a theory, but there may be others who have done this successfully.

How do I close a JInternalFrame when using subclasses and a separate cla...

The heading should be: How do I close a JInternalFrame when using subclasses and a separate class for the actionListener?
I have just created a JInternalFrame appclication and now I want to structure up my code. I have a Superclass that contains the usual settings for the two JInternalFrame:s, and the two subclasses with frame specific information. Both the JInternalFrames use the same OK button. I want to have the actionListener outside the classes to avoid repetition of code. But the dispose()-function does not work properly, it does not close the opened JInternalFrame. What�s wrong?
class Superclass extends JFrame
     JButton b= new JButton("ok");
     Superclass()
class Subclass1 extends Superclass
     Subclass1 ()
          add(ok);
       ok.addActionListener(new Listener());
class Subclass2 extends Superclass
     Subclass2 ()
          add(ok);
       ok.addActionListener(new Listener());
class Listener extends Superclass implements ActionListener
     public void actionPerformed(ActionEvent e)
               dispose();
}How do I controll in the Listener class that the button in Subclass1 is beeing pressed?

First of all I think I misunderstood your question. You said you had two internal frames, so I thought you wanted to close the internal frame.
It now looks to me like you want to close the entire JFrame, which makes the code even a little easier. Something like:
JComponent component = (JComponent)event.getSource();
JFrame frame = (JFrame)SwingUtilities.windowForComponent( component );
frame.dispose();
Ok, I will make a try:
public static Container getAncestorOfClass(Class c, Component comp)
w.getAncestorOfClass(w, this); Fiirst you need to learn the basics of reading the API.
"getAncestorOfClass()" is a static method. That means you don't use a variable to invoke the method. You use the class itself.
"w" is a variable, which is a JFrame, but that is not what the first parameter should be. The first parameter is a "Class".
"this" will refer to your Listener class, but you need the Component that generated the ActionEvent.
When I thought you wanted to close an internal frame then the code would have been something like:
JComponent component = (JComponent)event.getSource();
Container container = SwingUtilities.getAncesterOfClass( JInternalFrame.class, component );
JInternalFrame internalFrame = (JInternalFrame)container;
internalFrame.invokeSomeMethodHere();If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)", that demonstrates the incorrect behaviour.
http://homepage1.nifty.com/algafield/sscce.html

How do I stop system sounds when using AirPlay on my MacBook Pro?

Hi all,
Probably a quick question, but I'm fairly new to Macs. I've a Macbook Pro 13 Late 2011 and now I've got an Apple TV, I use AirPlay. But how do I stop system sounds when using AirPlay?
Many thanks in advance, Jon.

Open AirPort Utility located in HD > Applications > Utilities
From the AirPort Utility menu bar click AirPort Utility > Preferences
Deselect: Monitor AirPort base stations for problems

Prompting for password and username only when using dynamic parameters

Post Author: Co3023
CA Forum: Crystal Reports
How do I stop CR XI prompting for password and username only when using dynamic parameters. When no dynamic parameters are used CR XI isn't prompting for the DB user name and password. The report is run from an application which passes the user name and password. I am using Oracle and the problem is both with the native oracle driver and the ODBC RDO driver.

Post Author: jehanzeb
CA Forum: Crystal Reports
I didnt ask you to change it to static I said I took the parameters totally out of the report. Saved it. Then re-enter the dynamic parameters into the report and it worked for me. That might have worked for you, not sure why you changed it to static.
Ok I have just created a quick report using dynamic parameters, it didnt ask me for the username password.
Can you create a sample report - just to test the db? and see if it works? add only 1 or 2 fields in the report, create parameters (dynamic) and see if it works
why don't you embed the username and password in your application, it won't ask for username password then.

How can I customize the toolbar when using the attribute browser

In CVI 2012, the toolbar changes depending on the environment, e.g. it is different for the source window and the UI editor. The toolbar can be customized using the menu Options / Toolbar...
Unfortunately, when using the attribute browser of the UI editor, another toolbar is displayed, i.e. not the UI editor toolbar.... I would have assumed that the attribute browser belongs to the UI editor, obviously it doesn't... So how can I customize the toolbar when using the attribute browser?
Solved!
Go to Solution.

Luis,
It's nice to have you back
Thank you for the clarification, so I'll elaborate a bit more: In the regular workspace toolbar, I have a disk symbol to save the file. This symbol is gone in the attribute browser...
So I have three different toolbars, for source code (workspace), UI editor, and the UI editor displayed but the attribute browser clicked on (selected)...
Thanks
Wolfgang
Source code:
UI editor:
Attribute browser:

I put in my gift card code and at the top of my home page it says that I have 15 dollars. When I go to purchase it still makes me put in the code and says that it invalid. How do I pay for something when I already put in the code? please help

I put in my gift card code and at the top of my home page it says that I have 15 dollars. When I go to purchase it still makes me put in the code and says that it invalid. How do I pay for something when I already put in the code? please help

See Here > http://support.apple.com/kb/TS1646
If no joy...
Contact iTunes Customer Service
Apple Support iTunes Store Contact Us

How to write code for font family using swing?

how to write code for font family using swing?
i tried this code.but i got only font styles.but i need font family.observ this code
import java.awt.*;
import java.awt.event.*;
public class fontSelect extends java.awt.Dialog implements AdjustmentListener, ItemListener, TextListener, ActionListener {
public Font selectedFont; //to get result
public boolean isSelected = false;
public Color selectedBackground, selectedForeground;
     public fontSelect(Frame parent, boolean modal) {
          super(parent, modal);
     String fntName[] = getToolkit().getFontList();
GraphicsEnvironment ge = GraphicsEnvironment.getLocalGraphicsEnvironment();
String[] names = ge.getAvailableFontFamilyNames();
          //{{INIT_CONTROLS
          setLayout(null);
          setVisible(false);
//setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          setSize(insets().left + insets().right + 380,insets().top + insets().bottom + 282);
          setBackground(java.awt.Color.lightGray);
fontList = new java.awt.Choice();
          //fontList = new java.awt.List(0,false);
          add(fontList);
          fontList.setBounds(insets().left +25,insets().top + 50,137,144);
          //label1 = new java.awt.Label("Example:-");
          //label1.setBounds(insets().left + 220,insets().top + 36,84,30);
          //add(label1);
          exampleText = new java.awt.TextField();
          //exampleText.setText("sample string ");
          //exampleText.setBounds(insets().left + 40,insets().top + 50,84,21);
          //add(exampleText);
          label2 = new java.awt.Label("Font Family:-");
          label2.setBounds(insets().left + 25,insets().top + 30,70,19);
          add(label2);
          isBold = new java.awt.Checkbox("Bold");
          isBold.setBounds(insets().left + 320,insets().top + 90,60,18);
          isBold.setFont(new Font("Times New Roman", Font.BOLD, 12));
          add(isBold);
          isItalic = new java.awt.Checkbox("Italic");
          isItalic.setBounds(insets().left + 250,insets().top + 90,48,17);
          isItalic.setFont(new Font("Times New Roman", Font.ITALIC, 12));
          add(isItalic);
          showFont = new java.awt.Label("samplestring ",Label.CENTER);
          showFont.setBounds(insets().left + 240,insets().top +50,120,30);
          showFont.setBackground(java.awt.Color.white);
          add(showFont);
label11 = new java.awt.Label("Size:-");
          label11.setBounds(insets().left + 290,insets().top + 120,70,19);
          add(label11);
          fontSize = new java.awt.Choice();
add(fontSize);
          //label11 = new java.awt.Label("Example string");
          fontSize.setBounds(insets().left + 290,insets().top + 140,60,23);
          fontSize.setBackground(java.awt.Color.white);
          btnSelect = new java.awt.Button();
          btnSelect.setLabel("Select");
          btnSelect.setBounds(insets().left + 280,insets().top + 190,87,24);
          add(btnSelect);
          btnCancel = new java.awt.Button();
          btnCancel.setLabel("Cancel");
          btnCancel.setBounds(insets().left + 280,insets().top + 230,91,24);
          add(btnCancel);
          label3 = new java.awt.Label("Background:-");
          label3.setBounds(insets().left + 24,insets().top + 90,94,18);
          add(label3);
          rBackground = new java.awt.Scrollbar(Scrollbar.HORIZONTAL,255,0,0,255);
          rBackground.setBounds(insets().left + 24,insets().top +110 ,197,21);
          add(rBackground);
          gBackground = new java.awt.Scrollbar(Scrollbar.HORIZONTAL,255,0,0,255);
          gBackground.setBounds(insets().left + 24,insets().top + 135,197,21);
          add(gBackground);
          bBackground = new java.awt.Scrollbar(Scrollbar.HORIZONTAL,255,0,0,255);
          bBackground.setBounds(insets().left + 24,insets().top + 160,197,21);
          add(bBackground);
          label4 = new java.awt.Label("R");
          label4.setBounds(insets().left + 12,insets().top + 110,12,18);
          label4.setFont(new Font("Times New Roman", Font.BOLD, 12));
          label4.setForeground(java.awt.Color.red);
          add(label4);
          label5 = new java.awt.Label("G");
          label5.setBounds(insets().left + 12,insets().top + 135,12,18);
          label5.setFont(new Font("Times New Roman", Font.BOLD, 12));
          label5.setForeground(new Color(-16744448));
          add(label5);
          label6 = new java.awt.Label("B");
          label6.setBounds(insets().left + 12,insets().top + 160,12,18);
          label6.setFont(new Font("Times New Roman", Font.BOLD, 12));
          label6.setForeground(java.awt.Color.blue);
          add(label6);
          rBackValue = new java.awt.Label("255");
          rBackValue.setBounds(insets().left + 225,insets().top + 110,24,12);
          rBackValue.setFont(new Font("Times New Roman", Font.BOLD, 12));
          rBackValue.setForeground(java.awt.Color.red);
          add(rBackValue);
          gBackValue = new java.awt.Label("255");
          gBackValue.setBounds(insets().left + 225,insets().top + 135,24,12);
          gBackValue.setFont(new Font("Times New Roman", Font.BOLD, 12));
          gBackValue.setForeground(new Color(-16744384));
          add(gBackValue);
          bBackValue = new java.awt.Label("255");
          bBackValue.setBounds(insets().left + 225,insets().top + 160,24,12);
          bBackValue.setFont(new Font("Times New Roman", Font.BOLD, 12));
          bBackValue.setForeground(java.awt.Color.blue);
          add(bBackValue);
          label7 = new java.awt.Label("Foreground:-");
          label7.setBounds(insets().left + 20,insets().top + 185,94,18);
          add(label7);
          rForeground = new java.awt.Scrollbar(Scrollbar.HORIZONTAL,0,0,0,255);
          rForeground.setBounds(insets().left + 20,insets().top + 205,197,21);
          add(rForeground);
          gForeground = new java.awt.Scrollbar(Scrollbar.HORIZONTAL,0,0,0,255);
          gForeground.setBounds(insets().left + 20,insets().top + 230,197,21);
          add(gForeground);
          bForeground = new java.awt.Scrollbar(Scrollbar.HORIZONTAL,0,0,0,255);
          bForeground.setBounds(insets().left + 20,insets().top + 255,197,21);
          add(bForeground);
          label8 = new java.awt.Label("R");
          label8.setBounds(insets().left + 10,insets().top + 205,12,18);
          label8.setFont(new Font("Times New Roman", Font.BOLD, 12));
          label8.setForeground(java.awt.Color.red);
          add(label8);
          label9 = new java.awt.Label("G");
          label9.setBounds(insets().left + 10,insets().top + 230,12,18);
          label9.setFont(new Font("Times New Roman", Font.BOLD, 12));
          label9.setForeground(new Color(-16744448));
          add(label9);
          label10 = new java.awt.Label("B");
          label10.setBounds(insets().left + 10,insets().top + 255,12,18);
          label10.setFont(new Font("Times New Roman", Font.BOLD, 12));
          label10.setForeground(java.awt.Color.blue);
          add(label10);
          rForeValue = new java.awt.Label("255");
          rForeValue.setBounds(insets().left + 220,insets().top + 205,24,12);
          rForeValue.setFont(new Font("Times New Roman", Font.BOLD, 12));
          rForeValue.setForeground(java.awt.Color.red);
          add(rForeValue);
          gForeValue = new java.awt.Label("255");
          gForeValue.setBounds(insets().left + 220,insets().top + 230,24,12);
          gForeValue.setFont(new Font("Times New Roman", Font.BOLD, 12));
          gForeValue.setForeground(new Color(-16744384));
          add(gForeValue);
          bForeValue = new java.awt.Label("255");
          bForeValue.setBounds(insets().left + 220,insets().top + 255,24,12);
          bForeValue.setFont(new Font("Times New Roman", Font.BOLD, 12));
          bForeValue.setForeground(java.awt.Color.blue);
          add(bForeValue);
          setTitle("Choosing font");
          //{{REGISTER_LISTENERS
          exampleText.addTextListener(this);
          btnSelect.addActionListener(this);
          btnCancel.addActionListener(this);
          isBold.addItemListener(this);
          fontList.addItemListener(this);
          isItalic.addItemListener(this);
          fontSize.addItemListener(this);
          rBackground.addAdjustmentListener(this);
          gBackground.addAdjustmentListener(this);
          bBackground.addAdjustmentListener(this);
          rForeground.addAdjustmentListener(this);
          gForeground.addAdjustmentListener(this);
          bForeground.addAdjustmentListener(this);
for (int i = 0; i < (int)fntName.length; i++)
fontList.addItem(fntName);
          showFont.setFont(new Font(fntName[0], Font.PLAIN, 12));
// GraphicsEnvironment ge = GraphicsEnvironment.getLocalGraphicsEnvironment();
//String[] names = ge.getAvailableFontFamilyNames();
for ( int i=0; i<names.length; i++ )
System.out.println( names[i] );
          selectedBackground = showFont.getBackground();
          selectedForeground = showFont.getForeground();
          int i = 8;
          do {
               fontSize.addItem(""+i);
               if (i<=30) i+=2;
               else if (i<=70) i+=4;
               else i+=8;
          } while (i<150);
          try {
               fontSize.select(2);
          } catch (IllegalArgumentException e) { }
     //{{DECLARE_CONTROLS
     //java.awt.List fontList;
java.awt.Label label11;
     java.awt.Label label1;
     java.awt.TextField exampleText;
     java.awt.Label label2;
     java.awt.Checkbox isBold;
     java.awt.Checkbox isItalic;
     java.awt.Label showFont;
     java.awt.Choice fontSize;
java.awt.Choice fontList;
     java.awt.Button btnSelect;
     java.awt.Button btnCancel;
     java.awt.Label label3;
     java.awt.Scrollbar rBackground;
     java.awt.Scrollbar gBackground;
     java.awt.Scrollbar bBackground;
     java.awt.Label label4;
     java.awt.Label label5;
     java.awt.Label label6;
     java.awt.Label rBackValue;
     java.awt.Label gBackValue;
     java.awt.Label bBackValue;
     java.awt.Label label7;
     java.awt.Scrollbar rForeground;
     java.awt.Scrollbar gForeground;
     java.awt.Scrollbar bForeground;
     java.awt.Label label8;
     java.awt.Label label9;
     java.awt.Label label10;
     java.awt.Label rForeValue;
     java.awt.Label gForeValue;
     java.awt.Label bForeValue;
private Font constructFont() {
int l;
try {
l = Integer.parseInt(fontSize.getSelectedItem());
} catch (NumberFormatException e) {l = 12;}
selectedFont = new Font(fontList.getItem(fontList.getSelectedIndex()>=0?fontList.getSelectedIndex():0 ), (isBold.getState()?Font.BOLD:0)+(isItalic.getState()?Font.ITALIC:0), l);
selectedBackground = new Color(rBackground.getValue(), gBackground.getValue(), bBackground.getValue());
selectedForeground = new Color(rForeground.getValue(), gForeground.getValue(), bForeground.getValue());
return (selectedFont);
     public void textValueChanged(java.awt.event.TextEvent event) {
          Object object = event.getSource();
          if (object == exampleText) showFont.setText(exampleText.getText());
     public void actionPerformed(java.awt.event.ActionEvent event) {
          Object object = event.getSource();
          if (object == btnSelect) {
isSelected = true;
selectedFont = constructFont();
     dispose();
} else if (object == btnCancel) {
     selectedFont = null;
selectedBackground = null;
selectedForeground = null;
dispose();
     public void itemStateChanged(java.awt.event.ItemEvent event) {
          Object object = event.getSource();
          if (object == isBold) showFont.setFont(constructFont());
          else if (object == fontList) showFont.setFont(constructFont());
          else if (object == isItalic) showFont.setFont(constructFont());
          else if (object == fontSize) showFont.setFont(constructFont());
     public void adjustmentValueChanged(java.awt.event.AdjustmentEvent event)
          Object object = event.getSource();
constructFont();
showFont.setBackground(new Color(rBackground.getValue(), gBackground.getValue(), bBackground.getValue()));
showFont.setForeground(new Color(rForeground.getValue(), gForeground.getValue(), bForeground.getValue()));
if (object == rBackground) rBackValue.setText(""+rBackground.getValue());
          else if (object == gBackground) gBackValue.setText(""+gBackground.getValue());
          else if (object == bBackground) bBackValue.setText(""+bBackground.getValue());
          else if (object == rForeground) rForeValue.setText(""+rForeground.getValue());
          else if (object == gForeground) gForeValue.setText(""+gForeground.getValue());
          else if (object == bForeground) bForeValue.setText(""+bForeground.getValue());

Okay, that's better. It would have been nice if the code was formatted, and if there was about 20% of that code. (Your example could have been just one JLabel and nothing else, for example.)
Anyway, now that you've posted that code, what is your question about it? I see you are calling a "getAvailableFontFamilyNames" method; do you have a question about that? If so, what is the question?

In PSE8 when using a selection took, unselected area turns red.

When using any of the selection tools, the unselected area turns red. How can I correct this?

Generally that just happens when using one of the Type Mask Tools or you get a red mask when using the Selection Brush Tool
in mask mode with Add to Selection enabled before starting the mask.
Could you post a screenshot?

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

When using multi select in some utilities error RME-00011 occurs

When using multi-select in some utilities of headstart
eg. Enforce CDM Ordering Standard for Colums
RME-000011 error occurs:
RME-00011: Operation 'upd' on COLUMN has failed
Activity aborted with API errors.
Does someone know what went wrong?
regards,
marcel

Marcel,
Could you please let me know what utility causes this erroneous behaviour? Is it possible to give a reproduceable description? I'm not aware of this problem. If you can force the failure again, is it possible to include the last part of the debug detailed log (set message level for user at 'debug detailed') in this thread?
Kind regards,
Marc Vahsen
Headstart Team

How to skip authorisation for infotype when using dynamic selection ?

Similar Messages

Maybe you are looking for