How to skip new MBP Registration Information
I'm new to the MBP and I'm just setting-up the machine. A few screens in it asks for registration info and I never register anything so I don't plan to start now...the comments at the bottom of the screen say that registration isn't required but I've been unable to find any way to skip past this screen...any ideas?
Command-Q at the registration prompt will quit registration
Best of luck
Similar Messages
-
New MBP registration information
Apologize in advance as this may not be directly related to 2008 plus MBPs. But I registered my MBP 3 days back on apple.com under my apple ID. When I login to my account on apple.com where do I see all the devices registered under my name / ID? I don't see the link for my devices at all.
Apple site is so NON user friendly... Frustrating at times... After 25 minutes of sleuthing, i found a link supportprofile.apple.com and when I logged in I did not find my MBP registered under my name. Now last week I had registered it and I even got an email about it... I added my MBP again this morning and now it shows up in my system profile...
-
Satellite A505 - How can I retrieve the registration information
I purchased a Toshiba A505 in March 2010. At this time I registered the product with Toshiba. This laptop has been stolen. How can I retrieve the registration information. Unfortunately I do not have the serial or product number.
Thank you.Hi
You should get in contact with Toshiba using the Stolen Units interface.
http://eu.computers.toshiba-europe.com/innovation/generic/STOLEN_UNITS_SUPPORT
Here you should go to point: *DEREGISTER*
Hope I could help you.
Greets -
How can I change my registration information in Lion?
I recently received a laptop for work and when I was setting it up, I used the name of the co-worker who looks after ordering computers to register. Now some of my applications (iChat) are automatically putting his name and information as a default and I cannot change it. I don't want to send iChat messages as a different person. My iChat handle is correct, but when I switch to Name, it is different than my own. How can I change the registration information for this computer without wiping the whole machine?
I think that I was not clear. I am not having a problem with any of my user accounts, this has to do with the initial setup of my Mac. The registration information is automatically populating form and apps with the wrong data. I have searched pretty exstensively and have not found a solution. I have resorted to an Erase and Install. That should do the trick.
-
How to use Time Capsule to tranfer files to a new MBP?
Hey guys,
I have recently sold my old MBP, and had all my files backed up with Time Capsule. Now, I want to transfer my files to the my new MBP. What is the best way to do this? What cable can I use? I'd appreciate any information. Thanks.This may help... Have you already created a user account on the new Mac? Or have you not yet started it? It makes a difference as to what approach you take as described below.
*_Migrating User Data From One Mac to Another_*
*Wirelessly or Directly Connected?* (For AirDisk Users)
Bear in mind that for Time Machine to successfully migrate user data, the backup disk must be accessed in the same manner in which the backups were originally created. Otherwise, the backups may not be visible for migration.
In other words, if backups were performed wirelessly to a hard disk attached to an Airport device, then the restoration will need to be performed either wirelessly, or, for faster speeds, via ethernet between your Mac and the Airport device. On the other hand, if backups were performed with the hard disk attached directly to your Mac, then the restoration will need to be performed with the hard disk connected directly to your Mac You cannot perform backups via one means and be able to access them via another means.
*Using Time Machine Before Initial Launch of New Mac*
Before starting the new Mac for the first time, attach the hard disk that contains the Time Machine backups from the old Mac. (For Time Capsule/AirDisk users: If you will be attempting this wirelessly, ensure that you are in range of your Airport wireless device. Alternatively, for faster migration of large quantities of data, connect your Mac via ethernet to your wireless device.)
Procedure:
Startup the new Mac and begin the setup process. You will initially see the video introduction.
At “Welcome” select your country and then preferred keyboard.
At “Do You Already Own a Mac?” you are asked “Would you like to transfer your information?”
+from another Mac+
+from another volume on this Mac+
+from a Time Machine backup+
+Do not transfer my information now+
Select “from a Time Machine backup” and click “Continue”.
At “Select a Backup Volume” choose your Time Machine backup disk and click “Continue”. (If you are attempting the migration wirelessly, then click “Join...” and select your network first.)
At “Transfer Your Information” check all the categories you wish to migrate over. If you wish your Mac to be in the same state as your last backup, then check everything. If, however, you are only interested in transferring one user account, then click the little disclosure triangle next to "Users". A list of all the previous users will appear. Just uncheck the user accounts you do NOT wish to migrate over. In other words, have only the desired account checked.
Give the installer time to calculate sizes.
Once that is complete, the “Transfer” button will become active and you can click it.
After the migration, verify the registration information, click “Connect” and you are done.
Once the migration is complete use Disk Utility to repair any permissions issues.
*Using Time Machine After Initial Launch of New Mac*
If you happened to initially set up the new Mac using a different username than the username on the account you wish to migrate, then skip to “Attach the hard disk containing...”.
If, on the other hand, it is the same username as the account you wish to migrate over, then do the following:
Go to System Preferences --> Accounts.
You may need to unlock the lock in the lower left to make changes.
Below the pane on the left click "+" and create a brand new Administrator User account on the Mac with a completely unique name - not the name of your own User account.
Now logout of the account you are currently in and log back in using the new Admin account you just created.
Attach the hard disk containing the previous Macs' Time Machine backups to the new computer. (For Time Capsule/AirDisk users migration will be much faster if you connect your Mac directly to the router via ethernet. [See “Wirelessly or Directly Connected” above])
Now go to Applications --> Utilities --> and launch Migration Assistant.
At the welcome dialogue click "Continue." You may be required to enter your Admin password.
For Migration Method chose "From a Time Machine backup or other disk". (Do not choose…
"Full System Restore" unless it is exactly the same Mac you are restoring to.)
At “Select the System to Transfer” choose the hard disk containing the previous Time Machine backups and click “Continue”. Give Migration Assistant some time as it connects to the drive and scans the disk for eligible data to migrate.
At “Select User Accounts to Transfer” put a check beside each account you would like migrate over to the new Mac.
At “Select the Items to Transfer” you can choose to migrate “Applications” over. If an application already resides on your new Mac, only the newest version will be transferred. Additionally, other “Files and Folders” that resided at the top level of your old Mac can be transferred at this point as well. Files from the “Library” folder of your old Mac will always be transferred over unless you uncheck the other two options.
Click “Continue”.
At “Select Computer Settings to Transfer” choose which settings you would prefer transferring to the new Mac. If you want a completely fresh system to start with, then do not check any of these options. This can be helpful if your previous system was experiencing issues.
Click “Transfer”.
If you have already created a User Account on the new Mac and it happens to be named the same as the User Account that is being migrated then Migration Assistant will report,
+"There is an existing user account with the same name as an account you are transferring."+
At that point, you will be able to choose one of the following:
+• Rename the user account you are transferring+
+• Replace the existing user account with the one you're transferring+
+• Do not transfer this user account+
If you wish the new Mac environment to be exactly the same as your old Mac, then avoid selecting “Rename the user account...”. Rather, select “Replace the existing user account...”. It will not be deleted but saved in a new folder labeled “Deleted Users” found in the main Users folder. Click “Next”.
At this point the transfer will begin with a bar displaying the progress. Once completed click “Quit”.
*Full Backup After Migration to New Mac*
Bear in mind that in all cases Time Machine will not continue to backup the previous Macs’ backup sets but will perform a new full backup. This is normal. Time Machine will resume incremental backups after the full backup has completed. To view previous backups, Control-click or right-click the Time Machine icon in your Dock or Option-click the Time Machine menu extra and Choose "Browse Other Time Machine Disks," then select the previous Mac’s backup set. You will enter Time Machine and be able to browse your previous back ups and restore files. [http://support.apple.com/kb/TS1338]
Let us know if this was helpful.
Cheers! -
How do I move my QT Pro from my old Powerbook to my new MBP?
I am replacing my PB with a MBP. How do I move/load my paid QT Pro from the PB to MBP?
Thanks, 0-0billYou can just type your registration code in the Quicktime preferences of your new MBP. The installed Quicktime Player application holds all the pro functions. It just needs to be unlocked.
To find your registration code open system preferences, click on quicktime and then click on the register tab
I think that you should then disable the Quicktime Pro function on your old computer as the licence is for one machine at a time. -
I changed my apple id but the applie id for icloud did not change on my mac in system preferences.
I have changed my apple id on system preferences under users and groups but the icloud preferences don't pick up the change.
I restarted my computer, and still no change.
I have been using icloud under my old apple id for mail calendars and notes.
How do I get icloud account information to change on my mac's system preferences and match my new apple id?
I am missing something.
Please help. Thanks.Thank you Roger, your solution gave me the courage to sign out of Systems Preferences. The pop up told me it was going to delete my contact and other information from my mac, so I was hesitant to do that. Well I did as you directed and I was able to sign in with my new apple id and I did not lose the information the pop up threatened I was going to. So again thank you. It is the little things that make a big difference sometimes.
-
How do I move a referenced library to new MBP?
I have a 500GB external drive containing scanned files of slides I inherited from my dad. (photos he took from 1940 - 2005).
I created an Aperture referenced library that works when I attached that external drive.
I'd like to move the files to a larger drive so that it can also hold my other Aperture and iPhoto libraries.
Can I safely move the original/referenced image files to a larger 2TB ext drive and retain the Aperture links etc?
What issues will this likely cause in Aperture? How do I avoid or correct such issues?
I have also just purchased a 2014 Macbook Pro 15, with the most current version of Mavericks and Aperture software.
The Aperture library was created on my 2009 MBP running OS 10.8 (not Mavericks)
Can I just drag and drop the existing Aperture library from the old MBP to the new MBP? - even though they use different OS?
Thanks in advance for any step by step guidance or advice.The most secure method of moving Referenced Originals is to do this using Aperture. Select all the Images whose Originals you want to more, and run "File ▹ Relocate Originals", selecting the new drive as the destination. Be careful with the settings in the Relocate dialog. 500 GB of date will take hours to move.
You should be able to copy the Library to your new machine and run it. Once opened, you may not be able to open that copy of your Library on your old machine (and you may have to wait many minutes for Aperture to close the Library the first time you close it).
Do each of your two tasks (moving Library, moving Referenced Originals) separately, and confirm the success of the move prior to doing the second.
What you are doing is straight-forward. Just make a complete back-up of both your Library and your Referenced Originals before you do anything, and don't delete or over-write them until you have confirmed that the Library works correctly and that the Referenced Originals are where you want them to be and are correctly linked to the Images in your Library. -
How do I import my library from an external disk to my new MBP hard drive?
My old MBP was running out of space so I exported my Aperture library (250GB) to an external drive. I just replaced my old computer with a new MBP with a 1TB flash drive. Now that I have the space, I want to put my library back on my computer but I can't figure out how bring it in from my external hard drive. Any ideas? Many thanks.
Why do you say " I exported my Aperture library"? Did you actually use "File > Export > Items as new Library" in Aperture to create a new library on your external drive? A simple drag and drop of the library should have sufficed. What is your Aperture version?
My old MBP was running out of space so I exported my Aperture library (250GB) to an external drive. I just replaced my old computer with a new MBP with a 1TB flash drive. Now that I have the space, I want to put my library back on my computer but I can't figure out how bring it in from my external hard drive. Any ideas? Many thanks.
Connect your external drive and use the Finder to drag the Aperture library from the external drive back to the Pictures folder.
Then double-click the library to point Aperture to the new location and open the copied library in Aperture.
If your Aperture library uses referenced originals, select the referenced images and use the command File > Consolidate originals" to move the originals back to your internal disk.
If you should encounter any error messages (like error -36) while moving the library to the internal drive, post back. -
How can I transfer my old information from my old iCloud account to my new one without resetting my phone and having to use my old account?
What is wrong with your old iCloud account?
-
Well I just purchased another Retina mbp 15 and this ones a keeper (sold 2 before this was just looking for a mint one). Now my issue is I cant get ilife (in particular imovie and iphoto) without purchasing it and I dont want to do that.... yet.
I did purchase a brand new mbp 17 in 2010 but not sure if I registered it or logged into the app store. Dont think I did because I dont see any downloads available in the app store.
I have an imac 27 Im using right now and I dug up the appllications cd it came with.
My questions are:
How can I install ilife or any of the apps without buying them?
Are the applications one use only for the specific machines?
Is there any way to use the resource dvd to install onto my retina ?
(regarding this I have tried using remote disc and my retina wont show anything under remote disc when the cd is in my ima )
ANy input or help is appreciated. I did enjoy using imove and iphoto alot and would like to have them again.I appreciate the replies. Grant if I have an Imac and the apps on the cd then what you are saying is it should be tied to my apple id and therefore I should be able to install them on my new macbook?
I dont recall when I bought my mbp 17 if it had a cd and back then it was my first mac.. dont think there was an app store just itunes. It isnt tied to my account but shouldnt it be? I guess the person who bought that 17 from me got a free bundle :/
Its not a matter of $30 I understand that fully. Its just its $30 wasted if I am able to get it.
What im confused about (and I dont care to argue apples reasoning for it) is tying ilife to 'that Mac alone" is just dumb when a new owner of a machine cant install it and has to buy it again. that means the original owner keeps the apps for any machine he wishes and it isnt for the machine.
I think im confusing myself and possibly answered my own question but ill leave it lol. -
How do I transfer only part of my library to a new MBP?
My son just got a new MBP for college. What is the best way to transfer *only his music and playlists* to his new MBP?
The portable Firewire drive is probably a faster option.
If playcounts, etc are important to him or if you want to try and do this with the least amount of work on your part, I would plug in the portable drive to your computer and drag & drop your iTunes folder (not just the iTunes Music folder you find inside the iTunes folder) to the external drive and copy the entire thing.
Now take he drive and plug it into his new Mac. Again, drag & drop your iTunes folder to his Mac's internal drive and copy the entire thing. I would use the default location of his user account -> Music folder.
If he opens iTunes now it should read the entire library in and will appear just like it does on your computer. If not you can force iTunes to see it by opening iTunes with these instructions and pointing it to the newly copies in library...
How to open an alternate iTunes Library file or create a new one
http://support.apple.com/kb/HT1589
At this point he has everything and now to get rid of yoru stuff and free up his hard drive, he can simply start deleting everything out of the library he is not interested in. Let him do all the work there.
All playlists, playcounts, ratings, etc. are all preserved and you only had to do two things, copy that folder twice.
Let me know if the above presents an issue and we need to do it a different way.
regards,
Patrick -
How do I install windows using BootCamp without cd drive fot the new MBP?
I need some softwares for my work (modelsim, altera, ltspices etc) but some of them only supports windows.
New MBP doesnt seem to have a cd driver.
How do I install windows using bootcamp without cd drivers?You can use a USB thumbdrive to do this, assuming you have access to a windows machine to format the usb stick.
I installed Win7 on my MB Air (2011), which of course lacks a DVD drive altogether, using this technique.
Basically, you download a tool called rEFIt to your macbook. ( http://sourceforge.net/projects/refit/files/rEFIt/0.14/rEFIt-0.14.dmg/download ) When this is installed, it gives you a boot selector menu when you boot the Macbook ('Do you want to boot to MacOS or to the USB drive?')
Then you download and run an Apple tool called Boot Camp Assistant, which allows you to partition your HD for the two operating systems to share; it also pulls down all the windows drivers you need.
Then prep the USB thumbdrive on a windows machine to be a Win7 installer disk. You'll want a drive in the 4gb+ range I think. You have to set up the thumbdrive to be bootable (lots of tools for that available), and then copy all the windows installation files over to it.
Put the thumbdrive in the macbook and boot holding down the option key.
Choose the rEFIt icon on boot, then choose to boot from the thumbdrive, then format your new windows partition to something Win7 can handle, and install windows.
On my machine I followed a slightly more involved process and wiped out MacOS entirely. I would have kept it on a small partition if I'd had a bigger hard drive.
If you need super detailed instructions, CNET has some here:
http://howto.cnet.com/8301-11310_39-20020513-285/install-win-7-on-macbook-air-fr om-a-usb-drive/
Tech-Recipes has some similar instructions here:
http://www.tech-recipes.com/rx/9136/macbook-air-install-windows-7-with-boot-camp -without-an-external-dvd-drive/
If you have any issues after trying this, ping me and I may have solved them when I went through the same process. -
How to populate iTunes library on external hard drive onto new MBP.
I have a Powerbook G4 that is slowly dying. I have a new MBP that I want to populate my iTunes library onto without moving my music off my external hard drive. I've tried holding down the OPTION key while launching iTunes and selecting the iTunes Library file, but it seems to only load songs that were added in 2006 or later.
How do I get a current iTunes Library file that will populate all the songs?
Or am I going about this the wrong way?
Thanks!!i want to keep the music on the external HD, and I have linked the MBP iTunes account to the external HD (as in where to look for music), but I just can't get the whole library to populate into the new iTunes account.
Thanks! -
I have lost my iphone 3GS. It was backed up to my macbook pro using itunes. I now have a new iphone series 4 (china model). How can I access the backup information for my old phone and put it on my new one?
Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Maybe you are looking for
-
ST03N shows users accessing transactions even when not logged in
Hello all... We are trying to determine how many times a user executed a transaction during a specific period, and are using ST03N to do this. We get the information fine, but it shows non-system users as having accessed transactions on days they ar
-
I need help to get the iPod to charge its battery and to operate normally with iTunes.
-
Not able to print full pages via wireless
Hello, I am looking for some assistance to troubleshoot an issue I am having printing from a computer using wireless to my wireless connected HP Officejet 4632. When I open a .pdf, for example, on a PC that is hardwired into my router, I can print th
-
Uplift of Jdeveloper Extension code from 10.1.1.3 to 11.1.1.4
Is there some sort of "Cookbook" for the uplift? I'm finding many classes have moved or are nolonger available. Any cross reference of packages/libraries etc?
-
Under which Apple Id is registered an Ipad
Hi everyone, does somebody know how to find out under which apple ID was registered an Ipad, because im trying to register an it says "According to our records, this serial number is registered to another Apple ID. If you have more than one Apple ID,