How to skip the Print Screen List pop-up message with standard T-code?
Dear Experts,
I want to do not see the Print Screen List pop-up message with standard T-code.
Ex, sm66, sm51
click on print button -> Print Screen List pop-up message(SAPGUI) -> print windows dialog (X)
click on print button -> print windows dialog (O)
Is it possible to disappear it?
Thanks,
Lee
Hello Mr.Lee,
If you are refering to the print icon on the toolbar (CTRL+P), then no, it is not possible.
This printer dialog is necessary for front-end printing so you can choose the active printer.
Regards,
Jude
Similar Messages
-
How to skip the PRINT screen?
Hi All,
I have a report, which calls the Smartform.
When I execute my report, the PRINT screen will appear, where i press the PRINT button, and then the form gets printed.
My requirement.
I dont want this PRINT screen to appear. When i execute the report, the form must get printed, skipping the PRINT screen.
Is there a way to do that?
Thanks
Krishna Kishor KammajeHi,
See the blocked code.
DATA: w_ctrlop TYPE ssfctrlop,
w_compop TYPE ssfcompop,
w_return TYPE ssfcrescl,
Variables declarations
v_form_name TYPE rs38l_fnam.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZZZ_TEST2'
importing
fm_name = v_form_name
exceptions
no_form = 1
no_function_module = 2
others = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
<b>w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.</b>
CALL FUNCTION v_form_name
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
user_settings = 'X'
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
If your problem is solved,kindly reward points and close the thread.Otherwise,get back. -
How to skip the first screen in se38
hi experts,
I am struck up somewhere in getters and setters in field symbols.
I am setting the file name field in se38 and trying to directly go to display mode of the program and i am doing that through RS_SPOOL_ACCESS . I am not able to skip the first screen of se38 and go to diplay mode of the program.
How can i do that. Skip first screen is not working.If all else fails, partial BDC may be in order.
report zrich_0003
no standard page heading line-size 255.
data: bdcdata type table of bdcdata with header line.
parameters: p_prog(30) type c.
start-of-selection.
perform bdc_dynpro using 'SAPLWBABAP' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RS38M-PROGRAMM'.
perform bdc_field using 'BDC_OKCODE'
'=SHOP'.
perform bdc_field using 'RS38M-PROGRAMM'
p_prog.
perform bdc_field using 'RS38M-FUNC_EDIT'
'X'.
call transaction 'SE38' using bdcdata mode 'E'.
* Start new screen *
form bdc_dynpro using program dynpro.
clear bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
append bdcdata.
endform.
* Insert field *
form bdc_field using fnam fval.
clear bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
append bdcdata.
endform.
Regards,
Rich Heilman -
How to skip the Selection screen completely for certain users?
Hi All,
I want to skip the entire selection screen based on sy-uname. I check if the sy-uname has sufficient authorization and based on that..I want to skip the entire selection screen. How do I do that?Hi Rachna,
use
<b>SUBMIT program
with sy-uname = 'TEST'
and return.</b>
If u specify and return the control will come back and execute the next line in the report.
It is giving the output directly without showing the selection screen.
If u r pressing back also it is not showing the selction screen.
This will work
Regards
Naresh -
How to skip the Selection screen while using BAPI_MATERIAL_DELETE
Hi,
I have to delete material master.
I'm using BAPI_MATERIAL_DELETE Fm,
But while executing this BAPI it is going to a screen where it is asking to tick the Check Box for material number.
Can you please tell me how to execute the BAPI Avoiding the selection screen.
Thanks & Regards,
RajenderHi,
Thanks for replying.
We have to run the BAPI in Background, Then how to achieve the default values.
Thanks & Regards,
Rajender. -
Skip the selection screen using BDCTAB call transaction
Hi experts,
I am using BDCTAB for call transaction SWI1 I need to skip the selection screen. Can you please tell me how to skip the selection screen using BDC call transaction?
Thank you in advance.....hi,
the first step is to pass some values to the selection screen, at least Date From and Date To; otherwise, it´ll take a long time. The second step is to emulate the Execute button, which is done with '/08'.
PERFORM fields USING 'BDC_OKCODE' '/08'.
Third step is to catch the programme and screen number. -
The Print Carriage Cannot Move error message
I tried to align printer because my printing output as been off center. However, when I try to run the align printer function, the printer stops after a few seconds and a few strange noises, and displays the error: The Printer Carriage Cannot Move. There is normally a sheet of paper jammed in the back carriage, but after I clear it, and try again, the same thing happens. Strangely, I don't have the paper jam issue when I copy or print (i just have an alignment problem). Why do I continue to have paper jam issues when I try to run the align printer function, but not any other functions?For instance, when I ran the clean printer function, the paper and the test came through very smoothly. What gives? please help. thanks!
Hi , Welcome to the HP Forums! I see that you are getting the "Print Carriage Cannot Move error message," with your HP Officejet Pro 8600. I am happy to help! It is possible you may have a permanent hardware malfunction with the printer. In order to determine this, please try the steps within the following guides: A 'Paper Jam' Error Displays on the HP Officejet Pro 8600 Printers.'Carriage Jam' Message Displays. Hope these guides will resolve your issue! “Please click the Thumbs up icon below to thank me for responding.”
-
How to enable the printer option in print priview screen in script
Hi All,
Please tell me how to enable the printer option in script print priview screen.
Thanks & Regards
Muralihi
the print option TDNOPRINT has to be intial (' '). NOT 'X'
TDNOPRINT CHAR 1 0 No printing from print preview
this will do.
Gr., Frank -
How do you email pdf from the print screen
Anyone found a way to email a pdf from the print screen?
ThanksPrevious screen of what? You need to be more specific.
-
I need to take a picture of a web page, insert it onto a powerpoint online, and crop the picture. I am pressing the print screen button, and right cliking paste. But I am getting the warning message saying that my browser can not use the clipboard, and I am unsure of how to take a picture, then paste it, and crop it all on to a power point.
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
-
How to hold the value in List box.
Hi All,
On my screen painter Screen I am displaying the Sold to party and ship to party with thier address.
I am also displaying the Shipping condition based on ship to party. To display the shipping condition i am using list box. Once the user enter the sold to party automatically all the field is going to populate in their respective fields. I am facing the problem that, The list box getting populated with shipping condition but once you choose the shipping condition and hit the enter the list box getting refreshed. I am using this code in PAI event. And I can Only use this in PAI.
The Function i am using for list box is CALL FUNCTION 'VRM_SET_VALUES'.
Pls suggest me how to hold the value in List box.
Thanks,
RakeshHi,
Now i am using in PBO.
the code below in in PBO.It is still not holding the value.
if list[] is initial.
perform SHP_COND.
endif.
form SHP_COND .
*DATA: SHOP(80).
clear : GT_VSBED, list.
refresh : GT_VSBED, list.
select vsbed
from knvv AS K
into table GT_VSBED
where Kvkorg = vbak-vkorg "Kkunnr = GV_STPH
and K~vtweg = vbak-vtweg
and K~spart = vbak-spart.
select VSBED vtext
from TVSBT
into table list
for all entries in GT_VSBED
where spras = sy-langu
and vsbed = GT_VSBED-VSBED.
*break-point.
NAME = 'SHP_CON'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = NAME
values = LIST[]
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " SHP_COND
Thanks,
Rakesh -
Calling a transaction and skipping the first screen
Dear forumers,
In my report program, I will need to call a custom transaction with skipping the first screen.
And, this custom transaction is created from a query.
Currently, the codes look like below:-
SET PARAMETER ID: 'BUK' FIELD w_output-bukrs,
'AN1' FIELD w_output-anln1.
CALL TRANSACTION 'ZCUSTQ' AND SKIP FIRST SCREEN.
Everything works perfectly alright except for one thing: The first screen is not skipped. When the custom transaction is called, the first screen is still displayed to the user.
Additionally, I also found out that the "SKIP FIRST SCREEN" does not work because the screen's next screen number is the same. This means the screen 1000's next screen is 1000 as well.
(See notes in italics below)
Does anyone have any ideas on how to resolve this? Please help.
This addition suppresses the display of a screen of the initial dynpro of a called dialog transaction. The addition AND SKIP FIRST SCREEN suppresses the first screen under these prerequisites:
For the initial dynpro, in the Screen Painter the own dynpro number must not be specified as the next screen number.
All mandatory input fields of the initial dynpro must be filled completely and with the correct values by the SPA/GPA parameters
If these prerequisites are met, that screen of the dynpro is displayed that is specified in the Screen Painter as the next dynpro of the initial dynpro.For Any Query , if you want to create the Transaction you need to use the Tcode START_REPORT
in general it will skip the first Transaction codes selection screen , Not your query reports selection screen.
I checked and verfied...
Steps to verify the issue..
1.Go to SE93 ,Now you will go for parametric transaction.
2. give the Transaction as START_REPORT, there you will have option Skip Initial Screen. You uncheck that.
3. Now give all information related to your query.
and see the effect
call TRANSACTION 'YYTCODE AND SKIP FIRST SCREEN.
This will always trying to skip the First transaction's selection/initial screen , Not your Query selection screen.
You also try to check and let me know. -
How to Fill the selection screen while calling the transaction
Hi All,
my requirement is in one of the screen while i will press a push button it will call one transaction and it will fill the selection screen build order number field and skip the first screen i.e the selection screen it will show the output of that report directly.
am using this code .
case sy-ucomm.
while 'FSLR'.
set PARAMETER ID 'ANR' FIELD aufnr.
RANGES s_aufnr FOR afko-aufnr.
s_aufnr-sign = 'I'.
s_aufnr-option = 'EQ'.
s_aufnr-low = aufnr.
APPEND s_aufnr.
CALL TRANSACTION 'ZFS1' USING s_aufnr
MODE 'E' .
AND SKIP FIRST SCREEN.
endcase.
here the problem is i cant use both skip screen and using at a time nither the screen is filling nor its skipping the first screen.
but its not working would any one please help how can i do this functionality?Hi
Do in this way.
DATA: rspar TYPE TABLE OF rsparams WITH HEADER LINE.
rspar-selname = 'S_AUFNR'.
rspar-kind = 'S'.
rspar-sign = 'I'.
rspar-option = 'EQ'.
rspar-low = 'aufnr'.
APPEND rspar.
SUBMIT zfs1_prog VIA SELECTION-SCREEN WITH SELECTION-TABLE rspar AND RETURN.
If this doesnt suit yer requirement, I wud suggest you to use BDC as below.
CALL TRANSACTION 'SE11' USING bdcdata
MODE 'E'
UPDATE 'A'. -
HTML Client: How to display the edit screen of an item given its ID?
To edit a selected item, I could easily add a new button on the command line and choose the existing method, "editSelected"
But how to edit another item instead of the selected item? Like How to edit an item whose ID # is 10? i.e How to display the edit screen for an item with ID # 10?The methods such as 'editSelected' apply to screen property collections. Picking these pre-selected options automatically configure the parameter as '<my-collection>.selectedItem'.
If you want an action not directly related to the screen properties then you can choose one of the screen commands under the 'Navigation' list starting with 'show', as in 'show<my-screen-name'. If the screen command accepts parameters then you can
configure the parameter passing manually. In your example, if you added a local 'int' data property to the screen you could assign the ID to that and bind the parameter passed to the screen to that.
In the instances when not even that is sufficient, well then you write your own custom method.
Dave
Dave Baker | AIDE for LightSwitch | Xpert360 blog | twitter : @xpert360 | Xpert360 website | Opinions are my own. For better forums, remember to mark posts as helpful/answer. -
CALL transaction using itab aswell as skip the first screen
Hi All,
I am doin BDC for some Ztransaction and i am that transaction using CALL TRANSACTION... but i want to skip the first screen of the Ztransaction as well as pass the Itab .. mode .. update and message table.... how can i do it...
CALL TRANSACTION Z... USING iTAB UPDATE DATE MODE A message bdcmsgcoll AND skip THE FIST SCREEN.. how to acheive it....PERFORM BDC_DYNPRO TABLES BDCDATA
USING 'SAPLBPT1' '0100'.
*PERFORM BDC_FIELD TABLES BDCDATA
USING 'BDC_CURSOR'
'BCONTD-BPCONTACT'.
*PERFORM BDC_FIELD TABLES BDCDATA
USING 'BDC_OKCODE'
'/00'.
*PERFORM BDC_FIELD TABLES BDCDATA
USING 'BCONTD-BPCONTACT'
V_CONTRACT.
the above code /recording call the first screen 100 which i dont want...
below code / recording is for screen 200 which i want to appear directly when i call the transaction....
skipping the first screen 100..
PERFORM BDC_DYNPRO TABLES BDCDATA
USING 'SAPLBPT1' '0200'.
PERFORM BDC_FIELD TABLES BDCDATA
USING 'BDC_OKCODE'
'=SAVE'
PERFORM BDC_FIELD TABLES BDCDATA
USING 'BCONTD-PARTNER'
V_GPART.
PERFORM BDC_FIELD TABLES BDCDATA
USING 'BCONTD-ADDINFO'
V_ZONE. "ZONE(S,N,E,E,NE)
PERFORM BDC_FIELD TABLES BDCDATA
USING 'BDC_CURSOR'
'EENO_DYNP-ZEILE(01)'.
PERFORM BDC_FIELD TABLES BDCDATA
USING 'EENO_DYNP-ZEILE(01)'
V_LOG. "MESSAGE
CALL TRANSACTION 'BCT1' USING BDCDATA
MODE MODE UPDATE UPDATE
MESSAGES INTO IT_BDCMSGCOLL.
Maybe you are looking for
-
Can I select the data of the indexes?
Hi everybody, Oracle storages indexes in index type segments as I know. Is it possible to see the data of these index segments like a table or view? So I would like to see not only the structue of it with: select * from dba_segments SG where SG.segme
-
TT bi-directional general workload architechture with 3 nodes
Hello Experts, We are starting a new project where we will have a cluster with 3 nodes. We will have both our application and TT running on each node. Then we will have a switch doing the application load balancing between the 3 nodes of the cluster.
-
Hi Guys, I have requirement like, my selection input as PROJECT , i need to get all the WBS element for the particular Project. Do we have any function module or table to get the data? Thanks, Gourisankar.
-
Hi There, i have an application running on C# .NET which use .NET Framework 3.5 SP1 and Crystal Report for Visual Studio 2008 x64. Now i'm facing the issue in application. suddenly my IIS crash , and the application is logout. i have opened advisory
-
Drawing custom component in AS
I have a custom component that is displayed using a repeater. Sometime, I need to draw that component in as. How can I add that component?