How to skip the update during start up of my new playbook

Hi... I just purchased my a new playbook and it is very frustrating... and disappointing... cause I need it wifi to get it started... After i managed to go to a cafe and get Wifi it was even more frustrating... since I had to update the software which is nearly 300MB... which I could not download since it was slow and getting disconnected... I wish blackberry gave smaller updates... or an option to skip the update... cause it 7 days since I have got my new playbook and yet not been able to use it... I would not recommend my friends to go for it since its been disappointing is there any other way to get it started or easier way to update the software... since its frustrating having it and not being able to use it.. Please help me with the problem Regards Rahul

The update process is to ensure you have the latest OS on it.
I dont know of a way to get around it at this time.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Similar Messages

How to skip the job during 12.1.1 upgrade automatically

Hi All,
We have completed our upgrade to R12.1.3 from 11.5.10.2 and during the upgrade process we have come across a worker failure for MSDOPDCODE.sql as below
ERROR at line 1:
ORA-33292: Insufficient permissions to access analytic workspace APPS.ODPCODE
using the specified access mode.
ORA-06512: at "SYS.DBMS_AW", line 67
ORA-06512: at "SYS.DBMS_AW", line 131
ORA-06512: at "SYS.DBMS_AW", line 977
ORA-06512: at "SYS.DBMS_AW", line 930
ORA-33262: Analytic workspace APPS.ODPCODE does not exist.
ORA-06512: at "SYS.DBMS_AW", line 901
ORA-06512: at "APPS.MSD_AW_LOADER", line 10
ORA-06512: at line 3
and we had skipped the worker. We are thinking of a way to automate this process for the next round of upgrade by updating the upgrade driver, but we when we checked the driver, we see these lines only
$>grep MSDODPCODE.sql u_merged.drv
copy msd patch/115/sql MSDODPCODE.sql 120.14
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDABOUT.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDABOUTINFO.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACCESSRWLIB.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACCMSDIMS.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACCMSGRP.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACTIVEFOLDER.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACTIVITYCATAL.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACTIVITYENTRY.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACTIVITYERROR.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACTIVITYFORMU.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACTIVITYRETCO.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACTIVITYRETVA.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACTIVITYTEXT.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDADDASGENTRY.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSD__OBCAT.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSD__OBENTRY.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSD__OBPROP.sql
# file-version-parsed msd patch/115/sql MSDODPCODE.sql 120.14
# noexec msd patch/115/sql MSDODPCODE.sql
$>
So, I didn't see any specific line which is executing the sql. Can you guys suggest a better aproach to automate this process?
Thanks

965417 wrote:
Hi All,
We have completed our upgrade to R12.1.3 from 11.5.10.2 and during the upgrade process we have come across a worker failure for MSDOPDCODE.sql as below
ERROR at line 1:
ORA-33292: Insufficient permissions to access analytic workspace APPS.ODPCODE
using the specified access mode.
ORA-06512: at "SYS.DBMS_AW", line 67
ORA-06512: at "SYS.DBMS_AW", line 131
ORA-06512: at "SYS.DBMS_AW", line 977
ORA-06512: at "SYS.DBMS_AW", line 930
ORA-33262: Analytic workspace APPS.ODPCODE does not exist.
ORA-06512: at "SYS.DBMS_AW", line 901
ORA-06512: at "APPS.MSD_AW_LOADER", line 10
ORA-06512: at line 3
and we had skipped the worker. We are thinking of a way to automate this process for the next round of upgrade by updating the upgrade driver, but we when we checked the driver, we see these lines only
$>grep MSDODPCODE.sql u_merged.drv
copy msd patch/115/sql MSDODPCODE.sql 120.14
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDABOUT.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDABOUTINFO.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACCESSRWLIB.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACCMSDIMS.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACCMSGRP.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACTIVEFOLDER.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACTIVITYCATAL.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACTIVITYENTRY.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACTIVITYERROR.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACTIVITYFORMU.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACTIVITYRETCO.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACTIVITYRETVA.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDACTIVITYTEXT.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSDADDASGENTRY.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSD__OBCAT.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSD__OBENTRY.sql
sql msd patch/115/sql MSDODPCODE.sql none none none sqlplus &phase=dat checkfile:msd:patch/115/sql:MSD__OBPROP.sql
# file-version-parsed msd patch/115/sql MSDODPCODE.sql 120.14
# noexec msd patch/115/sql MSDODPCODE.sql
$>
So, I didn't see any specific line which is executing the sql. Can you guys suggest a better aproach to automate this process?
Thanks
Please see (Patch 6678700 Worker Fails On Applying MSDODPCODE.sql With ORA-33292 Insufficient Permissions To Access Analytic Workspace APPS.ODPCODE; ORA-33262: Analytic workspace ODPCODE does not exist. [ID 1054417.1]).
You should not skip the worker unless you are instructed to do so by Oracle Support. Please run "sqlplus -s APPS/***** @<Path to $MSD_TOP>/patch/115/sql/MSDODPCODE.sql" manually after fixing the issue as per the doc and check then.
Thanks,
Hussein

I am trying to download ITunes. I get the message during starting services - Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. How do I verify?

I am trying to download ITunes. I get the message during starting services - Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. How do I verify? How do I complete the installation?

Does anyone knows how to fix this problem?

My iphone somehow got put in recovery mode, but i didnt have it updated. So i am trying to recover it, but i have to go through update first and the update will not finish. It always gets interrupted half way through..how do i skip the update?

My iphone some how got put in recovery mode, and i hadnt updated it yet and i keep trying to recover it, but it makes me update it first and amost to half way done it gets interrupted..is there any possible way to skip the update? i need my phone and i dont know what to do! Pleeease help me!

There is no way to skip.
Disable any security software on the computer and update the device.

HT4972 how to save the app during the software update..??

i would like to update my iphone, i just wanna to know how to save the apps during the sowtware updates.

i would like to update my iphone, i just wanna to know how to save the apps during the sowtware updates.

TS4268 My husband and I use the same apple ID, after the update he started getting all my texts from me to other people and from other people to me. Anyone know how to turn this off?

My husband and I share the same apple ID for purchasing apps and what not, ever since the update he started receiving all my texts from other people and I am not even getting them half the time. Any thoughts on trying to fix this would be appreciated. I tried turning off imessage but then he got no texts at all.

Make sure that on each of your Settings>Messages> Send and Receive Addresses have only the appropriate phone number and email checked at the left. If his is checked on yours click on his it will uncheck

How to determine InfoCube name within the update rule start routine?

We are attempting to delete all the records where all key figure values are zeroes. We have about 15% of such records and we really don't need them.
We have yearly InfoCubes. We copy the InfoCube and update rules at the end of every year. So, we don't want to hard code any field names within the update rules.
If I could determine the target InfoCube name within the update rule start routine, I can find out all the key figures dynamically. But, I don't see a way of finding out the InfoCube name.
If you would share any ideas, I would really appreciate.
Thanks.
Sudhi Karkada.

Hi Sudhi,
I dont know if this is what you are looking for.
if you want to delete a record from being inserted when all the Key figure values are ZERO then you can use a Update Routine for some characteristic in the below way
If looking for the InfoCube:
if COMM_STRUCTURE-KF1 = 0 and COMM_STRUCTURE-KF2 AND....
RETURNCODE = 4.
else
RESULT = COMM_STRUCTURE-ChanracteristicObject.
endif.
If it is to an ODS / InfoCube in the start routine.
DELETE DATAPACKAGE where KF1=0 and kf2=0 and .....
Hope it helps.
Regards,
Praveen.
ENDLOOP.
Message was edited by: Praveen

HT4623 I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off. When I tried to turn it on again, it kept asking for the password over and over. What do I do n

I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off. When I tried to turn it on again, it kept asking for the password over and over. What do I do now?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How to debug the update FM

Hi,
I am facing a problem with the debugging of the update FM. I have enabled the update debugging and the system says that update debuging is on . even though the control did not go into the FM.
Do i need to check in any other transaction . Please give me the details steps on how to see the what is happening in the update FM.
Full marks are guaranteed.
thanks
sankar

Hi
I have got a clue from SAP help on how to debug the update FM see the below information from SAP
When you debug a program that calls function modules using the IN BACKGROUND TASK addition, they are processed in a background work process (additional internal session). If you set the In background task: Do not process option, the system collects the function calls, but does not start the background work process. The Debugger assigns a transaction ID, which identifies the background work process uniquely. You can now start the Debugger for the background work process using transaction SM58. You can select the function module concerned here, and then execute it via the Edit menu.
I have done everything that is said above , but could not find any entries in SM58
any suggestions
thanks
sankar

How long does the update for ios 7

How long does the update take on an ipad 2 for the ios 7?

The update has been going for 3 1/2 hours. The screen is black, if I hit the on/off button, the screen comes up with Itunes symbol with the usb cord. I assume it means I need to connect it to itunes through my computer.
I don't know if I lost my wifi connection during the update or not.
Does that sound right?

How to use the updated value in the same update statement

Hello,
I just wonder how to use the updated new value of other column in the same udpate statement. I am using Oracle 11.2, and want to update the two columns with one update statement as following:
create table tb_test (id number(5), tot number(5), mon_tot number(5));
update tb_test set (tot = 15, mon_tot = tot *15) where id = 1;
...I would like to update both tot and mon_tot column, the value of mon_tot shall be determinted by the new value of tot.
Thanks,
Edited by: 939569 on 1-Feb-2013 7:00 AM

Edit: example added
SQL> create table tb_test
2 ( id number(5)
3 , tot number(5)
4 , mon_tot number generated always as (tot*15) virtual
5 );
Table created.
SQL> insert into tb_test (id, tot) values (1, 5);
1 row created.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1          5         75
1 row selected.
SQL> update tb_test
2 set    tot = 15
3 where id = 1;
1 row updated.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1         15        225
1 row selected.

How to display the updated data from db to user interface in sruts framewor

A beginner in this area, I have been able to read a record from a
MySQL database and populate in jsp form . Now, my goal is to
allow the user to edit the contents of the form and then update the
record in MySQL and then display the same in jsp. page
The scenario in detail
1)the data is fetched from db and displayed in non-editable format
2)Next button is clicked
3)Now in the same jsp page I view the same data from db in editable format
4)The user is allowed to change the information
5)Now update button is clicked
6)the records are updated in the db -Finished doing till this step
7)But the updated info in non - editable format to be displayed in jsp page is left pending.
Here is my code for jsp,i want know how to write an action for this,tried doing the same in java and I'm successful.but what I need is how to fetch the updated information in the user interface.
I've made both editable as well as non editable info in the same page with different actions.
pl help me,I'm a newbie
<%@ taglib uri="/WEB-INF/struts-bean" prefix="bean" %>
<%@ taglib uri="/WEB-INF/struts-html" prefix="html" %>
<%@ taglib uri="/WEB-INF/struts-logic" prefix="logic" %>
<%@ page language="java" %>
<%@ page import="java.util.ArrayList,java.util.Iterator" %>
<%@ page import="com.finocus.common.container.CustomerDetailsTest;" %>
<html:html>
<head>
 <title>CUSTOMER DISPLAY</title>
</head>
<body>
 <table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><table width="100%" bgcolor="indigo">
 <tr>
 <td>Display</td>
 <td>Update</td>
 <td>Verify</td>
 <td>Confirm</td>
 </tr>
 </table>
 </td>
 </tr>
<%
 //Container for holding data
 ArrayList list = (ArrayList)session.getAttribute("CUSTOMERDETAILS");
 Iterator itr=list.iterator();
 while(itr.hasNext())
 CustomerDetailsTest cust = (CustomerDetailsTest) itr.next();
 System.out.println("testGetCustomerDetails()-successed. retrieved CustomerDetailsTest="+cust.toString());
%>
<%
 //Session for checking whether edit or non-edit mode
 String pageMode = (String)session.getAttribute("CUSTOMER_PAGE_MODE");
 session.removeAttribute("CUSTOMER_PAGE_MODE");
 if(null==pageMode)
 pageMode = "EDIT";
 if(pageMode.equals("EDIT"))
 //display data in the form
 System.out.println("Editable mode");
%>
 <html:form action="/nonedit">
 <tr>
 <td><table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><bean:message key="label.id"/></td>
 <td><%=cust.getCusId()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.Company"/>
 </td> 
 <tr>
 <td><bean:message key="label.cname"/></td>
 <td><html:text property="name" value="<%=cust.getCname()%>"/></td>
 <td><bean:message key="label.cphone"/></td>
 <td><html:text property="phone" value="<%=cust.getCphone()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr1"/></td>
 <td><html:text property="address1" value="<%=cust.getCaddress1()%>"/></td>
 <td><bean:message key="label.cemail"/></td>
 <td><html:text property="email" value="<%=cust.getCemail()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr2"/></td>
 <td><html:text property="address2" value="<%=cust.getCaddress2()%>"/></td>
 <td><bean:message key="label.cfax"/></td>
 <td><html:text property="fax" value="<%=cust.getCfax()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.ccity"/></td>
 <td><html:text property="city" value="<%=cust.getCcity()%>"/></td>
 <td><bean:message key="label.czip"/></td>
 <td><html:text property="zip" value="<%=cust.getZip()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.cstate"/></td>
 <td><html:text property="state" value="<%=cust.getCstate()%>"/></td>
 </tr> 
 <td>
 
 <bean:message key="label.Admin"/>
 </td> 
 <tr>
 <td><bean:message key="label.AAname"/></td>
 <td><html:text property="adminname" value="<%=cust.getAname()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAemail"/></td>
 <td><html:text property="adminemail" value="<%=cust.getAemail()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAphone"/></td>
 <td><html:text property="adminphone" value="<%=cust.getAphone()%>"/></td>
 </tr> 
 <td>
 
 <bean:message key="label.User"/>
 </td> 
 <tr>
 <td><bean:message key="label.AUname"/></td>
 <td><html:text property="adminusername" value="<%=cust.getUname()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AUemail"/></td>
 <td><html:text property="adminuseremail" value="<%=cust.getUemail()%>"/></td>
 </tr> 
 <tr align="center">
 <td><html:cancel value="Cancel"/>
 <html:submit value="Next"/></td>
 </tr>
 </html:form>
<%
 }else
 //display data in the text
 System.out.println("Non-Editable mode");
%>
 <html:form action="/edit">
 <tr>
 <td><table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><bean:message key="label.id"/></td>
 <td><%=cust.getCusId()%></td>
 <td><bean:message key="label.status"/></td>
 <td><%=cust.getStatus() %></td>
 </tr> 
 <td>
 
 <bean:message key="label.Company"/>
 </td> 
 <tr>
 <td><bean:message key="label.cname"/></td>
 <td><%=cust.getCname()%></td>
 <td><bean:message key="label.cphone"/></td>
 <td><%=cust.getCphone()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr1"/></td>
 <td><%=cust.getCaddress1()%></td>
 <td><bean:message key="label.cemail"/></td>
 <td><%=cust.getCemail()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr2"/></td>
 <td><%=cust.getCaddress2()%></td>
 <td><bean:message key="label.cfax"/></td>
 <td><%=cust.getCfax()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.ccity"/></td>
 <td><%=cust.getCcity()%></td>
 <td><bean:message key="label.czip"/></td>
 <td><%=cust.getZip()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.cstate"/></td>
 <td><%=cust.getCstate()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.Admin"/>
 </td> 
 <tr>
 <td><bean:message key="label.AAname"/></td>
 <td><%=cust.getAname()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAemail"/></td>
 <td><%=cust.getAemail()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAphone"/></td>
 <td><%=cust.getAphone()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.User"/>
 </td> 
 <tr>
 <td><bean:message key="label.AUname"/></td>
 <td><%=cust.getUname()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AUemail"/></td>
 <td><%=cust.getUemail()%></td>
 </tr> 
 <tr align="center">
 <td><html:submit value="Update"/></td>
 </tr>
 </html:form>
<%
%>
<%
%>
 </table>
 </td>
 </tr>
 </table>
</body>
</html:html>

u r using action classes. so after calling the insert method in Action Class to a dao... the next statement should be retrieve statement. so at the time of updating first it will get updated.. the next statement it will execute is retrieve and then set these details in VO or FORM and show it on JSP
Message was edited by:
leo_michael

Missing update for a game app after updating ios7 any ideas how to get the update

Went to update a game app this morning, had already hit update when the i os7 update screen popped went through with the ios update but after ipad restarted the game update is completely missing any ideas how to get the update back no luck so far

Hello THEVIN7
The next step if it is not updating, would be to delete the app and then download it again. Check out the general troubleshooting for apps purchased form the App Store.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Regards,
-Norm G.

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update so I can use the store.

If Software Update is offering the update then it would be compatible with your model. Unfortunately, you haven't provided us with any information on your hardware that would enable us to determine if it really is too old.
If you really wish to disable the update alert then the next time Software Update opens, select the update in the list then select "Ignore update" from SU's Update menu.

How to skip the date in breakdown maint order

Dear PM Guru's,
please suggest me how to skip the date inbetween the two working days. please check the below scenario: based on factory calendar (production ) saturday was holiday. one breakdown maintenance order was opened on friday afternoon and its closed on sunday afternoon. now user wants only breakdown hours of production running days/ hours. production was produced upto saturday earlymorning and its renewed sunday morning. where as saturday producion was not planned and its not produced , so user wants to skip that time from the breakdown duration calculation. please suggest me is it right practice? if its right how we have to do in SAP? please let me know it.
thanks in advance to all the PM guru's
regards
Jalu

Hi,
check this link Equipment Downtime
I believe u may have to recalculate the breakdown hrs using some FM in user exit QQMA0014 QM/PM/SM: Checks before saving a notification

How to skip the update during start up of my new playbook

Similar Messages

Maybe you are looking for