How to skip to another line??

Can anyone tell or show me when I wrire a message I. Don't know how to skip a line to go to another paragragh I tried using space key pad but its not working how can I?

Press the return or enter key to skip a line while typing a message.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

When I type an apostrophe in apple's mail program it skips to another line?

When I type a word that needs a apostrophe in email it skips to another line:
When I start typing and use the apostrophe like this… I’
m not sure why it goes to the next sentence>

There have been some issues with having "smart quotes" turned on in Mail. You may want to try turning that feature off.
Could that be the source of your problems?

How to skip first TWO Lines of .txt file using XSLT Mapping

Hi Friends ,
 I have an .txt file in has the format as
 <TEST>
 4564564545
 56456444566
 56465
 How can i skip the first two Lines when i am writing the XSLT Mapping ?
 That <TEST> and empty line shouldn't go the rfc .
 How can i skip and sent to rfc using XSLT Mapping ?
Best Regards .,
V.Rangarajan

you can avoid the empty lines in your File Content Conversion by defining offset.
Under Document Offset, specify the number of lines that are to be ignored at the beginning of the document.
This enables you to skip comment lines or column names during processing. If you do not make an entry, the default value is zero lines.
ref: http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
then the generated XML after FCC will not have the empty lines.

How to skip first 5 lines from a txt file when using sql*loader

Hi,
I have a txt file that contains header info tat i dont need. how can i skip those line when importing the file to my database?
Cheers

Danny Fasen wrote:
I think most of us would process this report using pl/sql:
- read the file until you've read the column headers
- read the account info and insert the data in the table until you have read the last account info line
- read the file until you've read a new set of column headers (page 2)
- read the account info and insert the data in the table until you have read the last account info line (page 2)
- etc. until you reach the total block idenfitied by Count On-line ...
- read the totals and compare them with the data inserted in the tableOr maybe like this...
First create an external table to read the report as whole lines...
SQL> ed
Wrote file afiedt.buf
1 CREATE TABLE ext_report (
2    line VARCHAR2(200)
3          )
4 ORGANIZATION EXTERNAL (
5    TYPE oracle_loader
6    DEFAULT DIRECTORY TEST_DIR
7    ACCESS PARAMETERS (
8      RECORDS DELIMITED BY NEWLINE
9      BADFILE 'bad_report.bad'
10      DISCARDFILE 'dis_report.dis'
11      LOGFILE 'log_report.log'
12      FIELDS TERMINATED BY X'0D' RTRIM
13      MISSING FIELD VALUES ARE NULL
14      REJECT ROWS WITH ALL NULL FIELDS
15        (
16         line
17        )
18      )
19      LOCATION ('report.txt')
20    )
21 PARALLEL
22* REJECT LIMIT UNLIMITED
SQL> /
Table created.
SQL> select * from ext_report;
LINE
x report page1
CDC:00220 / Sat Aug-08-2009 xxxxp for 02/08/09 - 08/08/09 Effective Date 11/08/09 Wed Sep-30-2009 08:25:43
Bill to
Retailer Retailer Name                  Name on Bank Account           Bank ABA   Bank Acct            On-line Amount Instant Amount Total Amount
======== ============================== ============================== ========== ==================== =============== =============== ===============
0100103 BANK Terminal                  raji                           123456789 123456789            -29,999.98    9 0.00         99 -29,999.98
0100105 Independent 1                  Savings                        123456789 100000002            -1,905.00     9 0.00         99 -1,905.00
0100106 Independent 2                  system                         123456789 100000003            -800.00       9 -15.00       99 -815.00
LARGE SPACE
weekly_eft_repo 1.0 Page: 2
CDC:00220 / Sat Aug-08-2009 Weekly EFT Sweep for 02/08/09 - 08/08/09 Effective Date 11/08/09 Wed Sep-30-2009 08:25:43
Bill to
Retailer Retailer Name Name on Bank Account Bank ABA Bank Acct On-line Amount Instant Amount Total Amount
======== ============================== ============================== ========== ==================== =============== =============== ===============
Count On-line Amount Instant Amount Total Amount
============== ====================== ====================== ======================
Debits 0 0.00 0.00 0.00
Credits 3 -32,704.98 -15.00 -32,719.98
Totals 3 -32,704.98 -15.00 -32,719.98
Total Tape Records / Blocks / Hash : 3 1 37037034
End of Report
23 rows selected.Then we can check we can just pull out the lines of data we're interested in from that...
SQL> ed
Wrote file afiedt.buf
1 create view vw_report as
2* select line from ext_report where regexp_like(line, '^[0-9]')
SQL> /
View created.
SQL> select * from vw_report;
LINE
0100103 BANK Terminal                  raji                           123456789 123456789            -29,999.98    9 0.00         99 -29,999.98
0100105 Independent 1                  Savings                        123456789 100000002            -1,905.00     9 0.00         99 -1,905.00
0100106 Independent 2                  system                         123456789 100000003            -800.00       9 -15.00       99 -815.00And then we adapt that view to extract the data from those lines as actual columns...
SQL> col retailer format a10
SQL> col retailer_name format a20
SQL> col name_on_bank_account format a20
SQL> col online_amount format 999,990.00
SQL> col instant_amount format 999,990.00
SQL> col total_amount format 999,990.00
SQL> ed
Wrote file afiedt.buf
1 create or replace view vw_report as
2 select regexp_substr(line, '[^ ]+', 1, 1) as retailer
3        ,trim(regexp_replace(regexp_substr(line, '[[:alpha:]][[:alnum:] ]*[[:alpha:]]', 1, 1), '(.*) +[^ ]+$', '\1')) as retailer_name
4        ,trim(regexp_replace(regexp_substr(line, '[[:alpha:]][[:alnum:] ]*[[:alpha:]]', 1, 1), '.* ([^ ]+)$', '\1')) as name_on_bank_account
5        ,to_number(regexp_substr(regexp_replace(line,'.*[[:alpha:]]([^[:alpha:]]+)','\1'), '[^ ]+', 1, 1)) as bank_aba
6        ,to_number(regexp_substr(regexp_replace(line,'.*[[:alpha:]]([^[:alpha:]]+)','\1'), '[^ ]+', 1, 2)) as bank_account
7        ,to_number(regexp_substr(regexp_replace(line,'.*[[:alpha:]]([^[:alpha:]]+)','\1'), '[^ ]+', 1, 3),'999,999.00') as online_amount
8        ,to_number(regexp_substr(regexp_replace(line,'.*[[:alpha:]]([^[:alpha:]]+)','\1'), '[^ ]+', 1, 5),'999,999.00') as instant_amount
9        ,to_number(regexp_substr(regexp_replace(line,'.*[[:alpha:]]([^[:alpha:]]+)','\1'), '[^ ]+', 1, 7),'999,999.00') as total_amount
10* from (select line from ext_report where regexp_like(line, '^[0-9]'))
SQL> /
View created.
SQL> select * from vw_report;
RETAILER   RETAILER_NAME        NAME_ON_BANK_ACCOUNT   BANK_ABA BANK_ACCOUNT ONLINE_AMOUNT INSTANT_AMOUNT TOTAL_AMOUNT
0100103    BANK Terminal        raji                  123456789    123456789    -29,999.98           0.00   -29,999.98
0100105    Independent 1        Savings               123456789    100000002     -1,905.00           0.00    -1,905.00
0100106    Independent 2        system                123456789    100000003       -800.00         -15.00      -815.00
SQL>I couldn't quite figure out the "9" and the "99" data that was on those lines so I assume it should just be ignored. I also formatted the report data to fixed columns width in my external text file as I'd assume that's how the data would be generated, not that that would make much difference when extracting the values with regular expressions as I've done.
So... something like that anyway. ;)

How to skip from one list to another list in interactive report?

Hi Friends,
How to skip from one list to another list in interactive report that means now i am in 7 th list how to skip 4th list ?
Or now i am in 7 th list how to skip 9th list ?
can anybody send sample code please.
Thanks in advance.

hi,
at line-selection.
case sy-lsind.
when 9.
sylsind = 4.
endcase.
try like this when u r in 9th list next it goes to 4 th list

How to skip line for delimited file type?

Hi, i wanna ask how to skip (example: the first two line) for delimited file type?
Thanks...
Here is my script
Function NY_Skip06Center [strField, strRecord]
' FDM DataPump Import Script:
'Created by: FDM_Admin
'Date created: 2/28/2006
Dim strEntity
'Check first two characters of entity
For strEntity = 1 to 6
'Skip line
Res.PblnSKip = True
Next strEntity
End if
End Function
But it returns this error when imported
Error: An error occurred importing the file.
Detail: Object variable or With block variable not set
Anyone knows what's wrong
Edited by: user649207 on Mar 19, 2010 2:15 AM
Edited by: user649207 on Mar 19, 2010 3:04 AM

strAcc = DW.Utilities.fParseString (strField, 1, 1, chr(9))
I didn't look closely enough last time. The above is illogical. The parsestring function parses a string based on a delimiter.
The function has these arguments:
String to Parse
How many fields are in the string
The parsed field to return
Field delimiter
In the above, strField is returning the field specified in your import format. You are also saying that there is a total of 1 field. If that were the case, you wouldn't need to parse anything.
I am guessing that your call needs to look something more like this:
strAcc = DW.Utilities.fParseString (*strRecord*, *8*, 1, chr(9))
Make sense?
If not, maybe you can include a few sample lines from your data file and that will make it easier to help you.
Is your import format fixed or delimited?

How to skip blank line (EOF char) at the end of the file while creating ?

Hi,
In my program I have to create a file in Text mode using OPEN DATASET statement. This file is being sent to a third party system for their processing. I came to know while creating the file using OPEN DATASET, one LF character is inserted end of the file resulting a blank line end of the file. Thus if my internal table contains 5 reocrds, in the created text file I can see 6 lines where last is a blank. My question is how to remove this blank line which is causing issue in the thirdparty system.
Here is the Code I have used.
   TRY.
Write the file in Text Mode
        OPEN DATASET lv_outpf FOR OUTPUT IN TEXT MODE ENCODING NON-UNICODE
                             WITH SMART LINEFEED
                              MESSAGE lv_msg.
        IF lv_msg IS NOT INITIAL.
          WRITE / lv_msg.
          EXIT.
        ENDIF.
        LOOP AT itab_new INTO st.
          TRANSFER st TO lv_outpf.
        ENDLOOP.
        CLOSE DATASET   lv_outpf.
      CATCH cx_root.                                    "#EC No Handler
    ENDTRY.

an effective way to do it:
open your dataset in binary mode, transfer the records but between each record transfer the LF (or CRLF according to your need)
after the last record you don't transfer the LF

How to SKIP a line in REPORTS 2.5 ?

Hi
I am trying to print something on a sheet which has perforations in the middle of the sheet. I need to skip the perforation line from my repeating frame which keeps printing the data. For eg. If I cross line no 11 then I need to skip one line and then start printing.
Could someone help with this one.
Thanks
Prabs
null

Hi,
Add "SKIP 1" to the BREAK command:
BREAK ON amount SKIP 1

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How do I add multiple lines to a cell

I am trying to create an assignment sheet in Numbers. I am using the "Schedule" template. Under each day of the week, I want to add daily assignments. But each assignment may need multiple lines. In the screenshot below, I want to add another line under "Genesis 5" but still have it within the same cell. How can I do that?

I do extensive research build on the work of others

How can I access another class in a MembershipRule's Expression

Hello,
I want to create an InstanceGroup using Module Microsoft.SystemCenter.GroupPopulator.
I need to collect all Logical Disks which contain an MS SQL DB Log File.
I would start as follows:
<DataSource ID="DS" TypeID="SC!Microsoft.SystemCenter.GroupPopulator">
<RuleId>$MPElement$</RuleId>
<GroupInstanceId>$Target/Id$</GroupInstanceId>
<MembershipRules>
 <MembershipRule>
 <MonitoringClass>$MPElement[Name="Windows!Microsoft.Windows.LogicalDisk"]$</MonitoringClass>
 <RelationshipClass>$MPElement[Name="MSIL!Microsoft.SystemCenter.InstanceGroupContainsEntities"]$</RelationshipClass>
<Expression>
 <And>
 
 <Expression>
 <SimpleExpression>
 <ValueExpression>
 <Property>$MPElement[Name="Windows!Microsoft.Windows.LogicalDevice"]/Name$</Property>
 </ValueExpression>
 <Operator>Equal</Operator>
 <ValueExpression>
 
 <GenericProperty>$MPElement[Name="SQL!Microsoft.SQLServer.2008.DBLogFile"]/Drive$</GenericProperty>
 </ValueExpression>
 </SimpleExpression>
 </Expression>
 <Expression>
 <SimpleExpression>
 <ValueExpression>
 <HostProperty>
 <MonitoringClass>$MPElement[Name="Windows!Microsoft.Windows.Computer"]</MonitoringClass>
 <Property>PrincipalName</Property>
 </HostProperty>
 </ValueExpression>
 <Operator>Equal</Operator>
 <ValueExpression>
 <GenericProperty>$MPElement[Name="SQL!Microsoft.SQLServer.2008.DBLogFile"]/Drive$</GenericProperty>
 </ValueExpression>
 </SimpleExpression>
 </Expression>
 </And>
 </Expression>
 </MembershipRule>
</MembershipRules>
</DataSource>
In the first expression you "see" my question:
I want to compare the LogicalDisk's Name Property with the DB Log File's Drive property.
But how can I access the DB Log File's Drive property in this MembershipRule ?
Furthermore LogicalDisk and DB Log File must be hosted on the same Windows Computer.
Would be great if somebody could help.
Thanks
Sebastian

Hi Niki,
thanks for the idea, but that will not work. $Target/Id$ refers always to the group to be discovered.
On last week end I was given following idea, hope it will work:
Step 1
Collect all the DB SQL Logfile Objects and write computername (PrincipalName?) and Driveletter into a textfile, line by line. Shouldn't be a problem, PowerShell is your friend.
Step 2
Read the file from Step 1, build discovery data for each disk drive as object of class "Logical Disk (Server)",
and then discover the containment-relationships from those Logical Drive(Server) Objects to the InstanceGroup.
Perhaps I must do it for the OS-Version related Disks, because I need the target classes of the Logical Disk Freespace monitors. Some more work. "Risks": I donot know the discovery algorithm for the Logical Disk(Server) Objects, but a "deep
dive" into the MPs should help.
Thanks to all, who have read.
I will inform you about progress and success
sebastian

My ipod and itunes both are skipping to another song about in the middle of the song. It doesn't happen on all songs...only some songs. I have reset the ipod, I have done a restore, I have reloaded itunes, I have updated the ipod but still am unable fix

My ipod and itunes both are skipping to another song about in the middle of the song. It doesn't happen on all songs...only some songs. I have reset the ipod, I have done a restore, I have reloaded itunes, I have updated the ipod but still am unable to figure out why. It did not used to do this. I can't figure out any pattern to the songs it does it on versus that it doesn't do it on. Some of the songs are purchased, some are imported, etc. We are running Windows 7.

how long have you had your ipod? mine did the same but after a while you need to get a new one because of the battery...

How to set the First Line of Table UI in Web Dynpro ABAP

Hi Team,
I have a scenario where I'm displaying two Table controls one below the other. When a line is selected in the first(Top) table, I have a supply function(Event) and I fill the second(bottom) table. Everything works fine till here.
The problem starts when I scroll the bottom table. Lets assume that I'm at line 20 of the second table and I press the lead selection to select another line on the first table. Here the second table is filled with new data but it is automatically scrolled to line 20. My questions:
1) Do I have to set some specific property of the second table? If yes, which one and where should I set it (In the supply function? I already have the "visibleRowCount" set to "10")
2) How do I dynamically get access to the Table Control properties?
Thanks for your time

Thank you Maksim,
I did set the "selectionMode" to "Auto". I don't understand where In supply function I have to set lead selection of nested node to first element. Please elaborate on this. Are you talking about the context attribute bound to the second table? OR do I have to change the Importing parameters "Node" and "Parent_Element" of my supply function?
Thanks for your time.

How do I remove a line before contract expires?

Hi,
Me and my wife moved to this network from another, last year. After the ios7 firmware upgrade on our apple iphones, we are suffering with lots of issues with the phone starting from screen freezes to call drops and poor signal quality inside buildings while our friends in other networks have good signal strength.
Even the native applications on the iphone like phonebook, settings and others have become dead slow that we feel like throwing the phone on the wall and break it!! Gone beyond tolerance level!!!
Why should the customers be victimized like this for the device manufacturer's and the service provider's pitfalls ? This is not genuine. We feel like we are robbed for a service which we think has no value for the money we pay.
We both have now reached a point where we cannot tolerate this device any more, it was all because of the ios 7 upgrade.
There is no way out!
There is no way to get an alternate phone which can perform better!!
It is very unfortunate that we have to bear a very high cost for us both to break the contract or upgrade to another phone. We're in a mess created by apple and verizon. It is unfair on them both.
So now I have decided to get my wife atleast out of this trouble and let her breathe free and let her switch.
How do I terminate a line ??
Thanks in advance people.

That may be so, but not everyone knows you can spread the payments for that phone over 12 monthly installments. Not everyone knows you WILL get a better price at a 3rd party site for your phone. Not everyone knows you can purchase a perfectly good phone at a site such as swappa.com. Not everyone knows that some people have been known to even "swap" phones with interested parties for a different phone at swappa.com
Just because Verizon is not the BEST(cheapest) option does not mean they are "bull----ing" you. Verizon is NEVER the cheapest option. What they consider helping you will just cost you a bit more than you would pay with another method of replacing your phone.
One last option would be to contact friends/family who may have an old Verizon phone you could use until your contract ends. I have personally loaned my old phones to friends/family 4 or 5 times during my time with Verizon service, the last of which was just 2 weeks ago. THIS option would most likely cost you NOTHING and for many, THAT would be the best option.

How to skip all files other than .txt file in Mail Sender Attachemnt ?

Hi Friends ,
 I am reading an Mail attachement and sending to R3 using PaloadSwapBean and MessageTransformBean .
 I used to get attachement as .txt file , name like Ex10185.txt in one mail . In another mail Ex10186.txt like that.
 If only thoses file comes then no problem .
 IF some times along with .txt file some .html files are coming by that time my Mail Adapter incorretly reading the .html file.
 Please tell me how to skip those kind of attachements and read only .txt file
 Expecting your answers asap.
Best Regards.,
V.Rangarajan

Hi Michal,
 Thanks for your reply , Sorry! I am aware of how to write adapter module. Can you please tell me how to write adapter module ?
 Is there any links available or Blogs ?
 I am expecting your reply asap .
Best Regards.,
V.Rangarajan

How to skip to another line??

Similar Messages

Maybe you are looking for