How to sleep screen?????
So I find "Activate on wrist raise" to "activate" when I don't want it to, and there doesn't seem to be any way to "calibrate" it or increase/decrease its sensitivity. With that said I have it turned off, but when it is off the screen stays on for 15 seconds until is shuts off itself, a wast of limited battery when you just want to check the time. Finally, there seems to be no way to adjust how long the display stays on either.
Tldr: Am I missing something or is their no way to "sleep" the display when wrist detection is turned off? I find this oversight to be, well a pretty obvious oversight, if it is one. Thank you.
I was at the Apple Store today looking at the Sport Watch. I actually wanted the display to stay on while I was using the stopwatch function but it automatically went off after 25 seconds even with the wrist activation turned off and with me holding my arm up. This is somewhat of a deal breaker for me. The Apple employee said there was no way to make it stay on longer. But to address your question, I think there is a setting that makes it go to sleep quicker but it could be only with the wrist activation setting. For my problem, perhaps a third-party app would eventually work.
Similar Messages
-
N8 - Nokia Sleeping Screen / Situations
I am interested in trying out Nokia Sleeping Screens available from the Beta Lab.
However, I already use Nokia Situations and I am very impressed with it, especially it's ability to switch profiles at certain times (eg, switching to my Night Time profile from 11pm until 8.00am)
How would Sleeping Screens work with Situations, or are they 2 completely different applications?
History: Always Nokia since 1994 including Nokia 2140, 7110e, 6150, 6210, 6310i, 6230i, N82
Current: Nokia N8 (Anna - I have no intention of going to Belle) - and delighted with it!@krisq
I don't really know!
I think that I was under the impression that Sleeping Screen was more than just a screen saver and I was thinking that some of the features were similar to Situations.
Thanks for making me look again at it!
I have now installed Sleeping Screen.
Regards
History: Always Nokia since 1994 including Nokia 2140, 7110e, 6150, 6210, 6310i, 6230i, N82
Current: Nokia N8 (Anna - I have no intention of going to Belle) - and delighted with it! -
How to prevent screen from dimming/sleeping/etc when playing video?
When playing a video, how do you keep your monitor from dimming or sleeping, or turning the screen saver on in the middle of your video?
In Linux, using mplayer on X11, whenever a video would play, it would "disable DPMS" and the screen would stay on until the video was finished playing, just as if someone was in the middle of typing.
Is there a setting for this with the MacBook? I suppose it would have to be something global, meaning for QuickTime player, embedded WMV browser players, etc.
MacBook Mac OS X (10.4.6)I only want to make changes for sleep and screen saver activation times for when I'm playing videos. I mean, if I'm watching an hour long video, I want to watch it without the screen changing 10 minutes into it.
However, I don't want to set my screen saver at 1 hour globally, as when I walk away from my text editor, it should sleep after 10 minutes or so.
Isn't there a way to set something so that the sleep/screen saver settings are disabled just when a video is being played? -
How to show screen design in .srf (from Screen Painter) using SDK?
How to show screen design in .srf (from Screen Painter) using SDK?
You need to use the LoadBatchActions method of the Application object to load .SRF files.
John. -
How to print screen in HP Pavilion g series?
hey. I'm using the HP Pavilion g series laptop. I've been using it for more than 2 years. But i really don"t know how to print screen in it.Hope you could help. Thank you.
Please Click Here to find the steps involved in "Print Screen" feature
Let me know how it goes
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP -
TV Anywhere Plus and PS3; How to take screens
Hi all!
I have TV card from subject and i want to know way how to take screens from my PS3.
Everywhere i look, it is simple explanation: u need TV card - so i have...
No matter if i connect composite (yellow ofc) from PS3 to Composite on Anywhere or to S-Video, which also has composite outputs - there is no any signal!
I tried to switching Video Source in TVR but nothing happens when i hit Snapshot (and which command is on keyboard?).
Please help
Thank YouHi all!
I have TV card from subject and i want to know way how to take screens from my PS3.
Everywhere i look, it is simple explanation: u need TV card - so i have...
No matter if i connect composite (yellow ofc) from PS3 to Composite on Anywhere or to S-Video, which also has composite outputs - there is no any signal!
I tried to switching Video Source in TVR but nothing happens when i hit Snapshot (and which command is on keyboard?).
Please help
Thank You -
How to handle screen resolution in bdc session method.
hi all,
how to handle screen resolution in bdc session method.Hello,
Why do need that for? Is it to add rows on a table control??
If it does, add new rows by using the add button instead of adding into the table control directly to each row.
Bye
Gabriel. -
How to do screen resolution in session method
hi guru how to do screen resolution in session method.
please tell me.
regards
subhasisSometime back this is refered in SDN :
Check table <i>CTU_PARAMS</i> and field <i>DEFSIZE</i> for setting fixed line of table control.
CALL TRANSACTION 'VA01' USING it_bdcdata
OPTIONS FROM OPT
MESSAGES INTO it_mesg.
opt of type ctu_params.
WA_CTU_PARAMS-DISMODE = 'N'. "no screen mode
WA_CTU_PARAMS-UPDMODE = 'S'. "synchronus update
WA_CTU_PARAMS-NOBINPT = 'X'.
WA_CTU_PARAMS-NOBIEND = 'X'.
WA_CTU_PARAMS-DEFSIZE = 'X'. "Default size
Default size will play good role in terms of resoultion. in one system in table control you can see 10rows, but in others system it will show 20 records. it depends on resoultion. but when you set the default size then it will take same (default screen size) in all the systems when you run BDC.
Thanks!! -
How to handle screen resolution in session method
how to handle screen resolution in session method without bdc_insert .
Hello,
Why do need that for? Is it to add rows on a table control??
If it does, add new rows by using the add button instead of adding into the table control directly to each row.
Bye
Gabriel. -
how to get screen content onto external VGA screen? Do have thunderbolt-VGA adapter but only get screensaver across
VGA and DVI do not carry sound. Only HDMI.
Use a minidisplay-to-HDMI adapter. Then when the TV is connected to the system use "System Prefences > Sound > Output" to select the TV for sound.
Or connect speakers to the output port of the MBP. -
accidentally did something to energy saver or sleep-screen is black all the time and have to keep restarting, help!!!
like to just close the lid at night and open in the am and voila everything is there
during the week I will restart, but not every day!
what should the settings of each area be (sleep, energy, screen saver, wallpaper) be so I can work all day?try this: PRAM http://support.apple.com/kb/ht1379
-
Let me know how to get screen size of user..
Hi.
I'm going to change a container size in a screen, dynamically.
I want to know that an user's screen is 1024X768 or others..
Let me know how to get screen size of user's computer.
Best Regards.
Kil - Nam.Look at Re: SAPgui window size (+)
Regards -
How to sleep Windows XP?
How to sleep Windows properly? I tried to sleep Windows before but it shuts down my Mac. I need to shut down Windows and restart.
You might want to post your question in the Boot Camp discussions:
http://discussions.apple.com/forum.jspa?forumID=1165 -
How to create screen resolution in bdc table control
hi gurus
can anyone suggest me
how to create screen resolution in bdc table control
thanks®ards
mark.Hi ,
Using CTU_PARAMS table for screen resolution .
For this sample code.
This is for Transation FB60.
report ZZFB60
no standard page heading line-size 255.
tables t100.
PARAMETERS : p_file1 like rlgrap-filename,
p_doctyp like RF05A-BUSCS,
p_invdat like INVFO-BLDAT,
p_posdat like INVFO-BUDAT.
CONSTANTS : C_TRANS_FB60(4) VALUE 'FB60'.
*Parameter string for runtime of CALL TRANSACTION
data : l_option type ctu_params,
l_subrc type sysubrc.
DATA : l_mstring(150).
data accnt type char17.
data : day type char2,
month type char2,
year type char4,
date1 type char10,
date2 type char10.
data : cnt(2) TYPE n,
cnt1 type i,
fld(25) TYPE c.
data : begin of excel occurs 0,
fieldname(255) type c,
end of excel.
DATA:BEGIN OF it_mess OCCURS 0,
msgtyp(5),
lms(200),
msgv1(50),
END OF it_mess.
data: begin of t_record occurs 0,
BUKRS(004),
ACCNT(017),
XBLNR(016),
WRBTR1(016),
WAERS(005),
SECCO(004) ,
SGTXT(050),
HKONT(010),
WRBTR2(017),
MWSKZ(002),
GSBER(004),
KOSTL(010),
end of t_record.
*Internal Table for Header Data
DATA : BEGIN OF t_head OCCURS 0,
BUKRS(004), "Company Code
ACCNT(017), "Account or Vendor
XBLNR(016), "Reference
WRBTR1(017), "Amount in document currency
WAERS(005), "Currency
SECCO(004), "Section Code
SGTXT(050), "Text
END OF t_head.
*Internal table for Item Data
DATA : BEGIN OF t_item OCCURS 0,
ACCNT(017), "Account
HKONT(010), "GL Account
WRBTR2(017), "Line item Amount in document currency
MWSKZ(002), "Tax Code
GSBER(004), " Business Area
KOSTL(010), "Cost centre
END OF t_item.
DATA: IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDC_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
*include bdcrecx1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM file_selection.
PERFORM data_upload.
PERFORM table_control.
start-of-selection.
l_option-defsize = 'X'.
l_option-dismode = 'A'.
l_option-updmode = 'S'.
day = p_invdat+6(2).
month = p_invdat+4(2).
year = p_invdat+0(4).
concatenate day month year into date1 SEPARATED BY '.'.
day = p_posdat+6(2).
month = p_posdat+4(2).
year = p_posdat+0(4).
concatenate day month year into date2 SEPARATED BY '.'.
*perform open_group.
loop at t_head.
CLEAR IT_BDCDATA.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPLACHD' '1000'.
perform bdc_field using 'BDC_OKCODE' '=ENTR'.
perform bdc_field using 'BKPF-BUKRS' t_head-bukrs.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_field using 'RF05A-BUSCS' p_doctyp.
perform bdc_field using 'INVFO-ACCNT' t_head-accnt.
perform bdc_field using 'INVFO-BLDAT' date1.
perform bdc_field using 'INVFO-BUDAT' date2.
perform bdc_field using 'INVFO-XBLNR' t_head-xblnr.
perform bdc_field using 'INVFO-WRBTR' t_head-wrbtr1.
perform bdc_field using 'INVFO-WAERS' t_head-waers.
perform bdc_field using 'INVFO-SECCO' t_head-secco.
perform bdc_field using 'INVFO-SGTXT' t_head-sgtxt.
cnt = 1.
cnt1 = 1.
loop at t_item where accnt = t_head-accnt.
*if cnt > 4.
*cnt = 4.
*endif.
if cnt1 gt 1.
CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
perform bdc_field using fld 'X'.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '=0005'.
endif.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '/00'.
CONCATENATE 'ACGL_ITEM-HKONT(' cnt ')' INTO fld.
perform bdc_field using fld t_item-hkont.
CONCATENATE 'ACGL_ITEM-WRBTR(' cnt ')' INTO fld.
perform bdc_field using fld t_item-wrbtr2.
CONCATENATE 'ACGL_ITEM-MWSKZ(' cnt ')' INTO fld.
perform bdc_field using fld t_item-mwskz.
CONCATENATE 'ACGL_ITEM-GSBER(' cnt ')' INTO fld.
perform bdc_field using fld t_item-gsber.
CONCATENATE 'ACGL_ITEM-KOSTL(' cnt ')' INTO fld.
perform bdc_field using fld t_item-kostl.
perform bdc_field using 'BDC_CURSOR' fld.
*CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
*perform bdc_field using fld 'X'.
cnt1 = cnt1 + 1.
*cnt = cnt + 1.
*if cnt > 1.
*perform bdc_dynpro using 'SAPMF05A' '1100'.
*perform bdc_field using 'BDC_OKCODE' '=0005'.
**perform bdc_field using 'BDC_OKCODE' '=0006'.
*endif.
endloop.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE'
'=BS'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
*perform bdc_transaction using 'FB60'.
CALL TRANSACTION C_TRANS_FB60 USING IT_BDCDATA options from l_option
MESSAGES INTO IT_BDC_MESSAGES.
perform error.
perform errordownload.
endloop.
*perform close_group.
*Form data_upload
FORM data_upload .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = p_file1
FILETYPE = 'DAT'
TABLES
DATA_TAB = t_record.
ENDFORM. " data_upload
*Form file_selection
FORM file_selection .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'p_file1'
IMPORTING
file_name = p_file1.
ENDFORM. " file_selection
Form BDC_DYNPRO
FORM BDC_DYNPRO using program dynpro.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
endform.
*Form BDC_FIELD
FORM bdc_field using fnam fval.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
Table Control
FORM table_control .
LOOP AT t_record.
ON CHANGE OF t_record-accnt.
MOVE-CORRESPONDING t_record TO t_head.
APPEND t_head.
ENDON.
loop at t_head.
t_item-accnt = t_head-accnt.
t_item-hkont = t_record-hkont.
t_item-wrbtr2 = t_record-wrbtr2 .
t_item-mwskz = t_record-mwskz .
t_item-gsber = t_record-gsber .
t_item-kostl = t_record-kostl.
APPEND t_item.
endloop.
If t_record-level = 'H'.
t_head-bukrs = t_record-text1.
t_head-accnt = t_record-text2.
t_head-xblnr = t_record-text3.
t_head-wrbtr1 = t_record-text4.
t_head-waers = t_record-text5.
t_head-secco = t_record-text6.
t_head-sgtxt = t_record-text7.
APPEND t_head.
else.
t_item-accnt = t_head-accnt.
t_item-hkont = t_record-text1.
t_item-wrbtr2 = t_record-text2.
t_item-mwskz = t_record-text3.
t_item-gsber = t_record-text4.
t_item-kostl = t_record-text5.
APPEND t_item.
endif.
ENDLOOP.
ENDFORM.
FORM error .
LOOP AT IT_BDC_MESSAGES.
IF IT_BDC_MESSAGES-msgtyp = 'E'.
SELECT single * FROM t100 WHERE
sprsl = it_BDC_MESSAGES-msgspra
AND arbgb = IT_BDC_MESSAGES-msgid
AND msgnr = IT_BDC_MESSAGES-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
REPLACE '&2' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
REPLACE '&3' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
REPLACE '&4' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
APPEND it_mess.
ELSE.
it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
APPEND it_mess.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
form errordownload.
*down the internal table to excel file.
call function 'EXCEL_OLE_STANDARD_DAT'
EXPORTING
file_name = 'c:/Error.xls'
TABLES
data_tab = it_mess
fieldnames = excel
EXCEPTIONS
file_not_exist = 1
filename_expected = 2
communication_error = 3
ole_object_method_error = 4
ole_object_property_error = 5
invalid_filename = 6
invalid_pivot_fields = 7
download_problem = 8
others = 9.
endform.
Reward if useful
Regards,
Narasimha
Edited by: narasimha marella on May 13, 2008 12:12 PM -
How to Sleep an IMac using the Magic Mouse
I received a Magic Mouse as a Christmas present. It works really nice but I
must be doing something wrong as it is battery hog. It is just the middle
of January (less than a month of use) and the 2nd set of batteries are now
down to 40%. I noticed it starts getting a little flakey at 30% so I may have
to replace the 2nd set soon. Yes they were good when installed as it read
100%.
I have not figured out how to Sleep the iMac and turn off the bluetooth
Magic Mouse. If I put the iMac to sleep with the Mouse, it wakes when I
slide the Magic Mouse power switch to OFF. I must be doing something
wrong.
Again, I like the Magic Mouse but really likes it suck down batteries.Same problem here. Batteries last about 10 days. Checked each with a digital multimeter. One battery was drained, the other was perfect.
I replaced the dead battery and marked the other one I left in. One week later, the new battery was dead. The marked battery was fine. The mouse is defective, it is only using the power on one side. Time for a return to the Apple Store. I hope it will be a quick swap.
Maybe you are looking for
-
Is it possible to display text from one area of my website onto another?
I'm busy building a site, and on my site I have a news section on my landing page with latest news. This news section is just the headline, and when you click on the link it takes you to the article. Is there any way to link the two together? I want
-
How to generate an interrupt using DI change detection on m-series card
Hi, I want to generate an interrupt on the positive edge of a digital input signal on the IO connector. Does anybody know how to configure an m-series card (PXI-6224) for this use through RLP programming? Thanks in advance, Richard
-
Activation problem with lenovo miix 2
Hi I get license expire error on my miix 2 tablet What is the problem? Should you please help me?
-
How / where to download CCP 1.2???
I see now the CCP 1.2 is available, yet when I login to our enterprise licensing site, I only see version 1.1. How and where can I download 1.2???
-
Safari bookmarks driving me UP THE WALL
I have checked this forum a few time recently, expecting to see people tearing their hair out over this issue... but there don't seem to be any recent posts about it, either here or in the iCloud forum, so maybe it's just me? (There are some older po