How to Slice Video, and Audio at same time

Hello Everyone.
When I click on Control K, it dose create a Slice in my Timeline, I want to create a Slice for my Audio as well, at the same time.
But every time I Slice a Video, and when I want to delete the Slice portion of the movie that I cut, the audio is still there, and I have to use the Razor Tool to select the cut portion under the Sliced movie.
Thanks
Simon.

Rod,
Through CS3, Ctrl+K worked on all Unlocked Tracks. With CS4, things changed a bit, as one could now Target multiple and even none contiguous Tracks. Ctrl+K still functions the same BUT now only affects Tracks that are Targeted, so no need for Locking them anymore. This has not changed with CS5.
Hope that this helps - it was changed as of CS4.
Hunt
PS - another workflow in CS3 and before, is to do the Crtl+K and then just ignore the Cut in some of the Clips, and just Alt+clicking on what you wish to remove, leaving the others alone. Though there is a Cut, one does not have to concern themselves with them, unless they wish to. Personally, I like the CS4 and later way of doing it - saves that Locking/Unlocking, or having to Alt+click to do things. However, I am a lazy sot.
PPS - Colin brings up a good point - how one has mapped THEIR keyboard shortcuts.

Similar Messages

Recording Video and Audio at Same time with simultaneous sync

I want to record a keyboard performance into garageband and at the same time record the playing of that performance with my video camera. Then I want to create a movie using the music from garageband and the video from the camera. I was thinking that if I can sync the video and audio when I'm recording the session, then that part is taken care of. Or, maybe this is easier than I think it is?
Is there a way to do this so that I can use the garageband record performance and have it synced to the video on the camera?
I don't want to use the audio from the video camera because the performance that is captured in Garageband will be much better and I can do editing of the individual notes in GB.
In the end, I just want to make a movie and/or podcast of the performance.
I'm a newbie regarding this, but I did search the forums and couldn't find anything specific. Mostly it was about importing video into GB3 and then syncing new audio. I'll basically have audio and video from the same performance in two separate locations and I want to bring them together perfectly in Garageband.
Thanks for any help you can provide.
Powerbook G4 - DVI Mac OS X (10.4.9)

Okay. I got the video and audio all together. I told you I'd link to it when it was up.
http://www.youtube.com/watch?v=FxssYpUNJm8
There's also a copy of it at http://www.myspace.com/bonjimmy/
And as a quick side comment, even though I uploaded the same video to both YouTube and MySpace, the MySpace version is much better. YouTube must do something to the video after it's uploaded.
What I learned doing this project:
I recorded the video first (which gave me the sequencing of the piano performance) and then I dubbed the audio in later. However, there wasn't a good way to sync the video and the prerecorded piano, so there are some spots where the dubbed audio vocal isn't accurate to the video. I'm not sure what the pros do for this. I was hoping I'd remember how I sang for the video but when a couple weeks go by before re-doing the audio, it's about impossible. I tried, though.
I remember working with an old 4-track and smpte to a sequencer a long time ago. With the way it is now, it's pretty cool that you can record digitally and mix and match and everything falls together perfectly as long as you have a place to match the video and the audio. It's pretty cool.
What else???
Does anyone have suggestions that would have made it better? Also, if you have suggestions on my performance or whatever, I'd love comments, but you can do that on the linked page.
Thanks again for all your help. (The point of the video is because I'm thinking about getting back out there and doing some more playing... I'm looking for a band or something else interesting...)
Powerbook G4 - DVI Mac OS X (10.4.10)

How to transfer video and audio files from windows PC to new ipad?

How to transfer video and audio files from windows PC to new ipad?

iTunes: Syncing media content to iOS devices and iPod
Sync with iTunes.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on all of the albums, artists, playlists that you want to sync
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes
Follow the same procedure for Movies.

How to unlink video and audio in FCPX

I am new in FCPX.. can someone tell me how to unlink video and audio in FCPX ? and how to mute audio rather than low the -db ?

There's no 'Unlink' audio (as such) in FCP X but if you select a clip in the timeline, and press Shift+Ctrl+S, the audio breaks away from the clip. Select this, and you can toggle it on and off by pressing V.
Take care with this, because it's easy to get the audio out of sync. You need to move the audio and video together if you have to move them, so I would select them both and press Option+G to make them into a Compound Clip (to preserve sync).
To mute the audio embedded in a clip, select the clip in the timeline and press Cmd+4 to open the Inspector.
Click the Audio Tab at the top of the Inspector and uncheck the Audio Waveform(s). Your Audio will be muted.
To mute audio for the entire project, go to the Roles tab in the Timeline Index (next to the film reel icon) and uncheck Audio or Dialogue (as appropriate).
Andy

How to link video and audio channels of multiple clips

Importing iMovie08 sequence via XML ends up with unlinked video and audio channel (only one of the stereo channels; see other post).
It is possible to link each clips audio and video track individualy.
Is there a way to do it in batch mode for all the clips in de timeline??

Dennis Connors wrote:
1. After selecting the in points on main audio and one of two video tracks, the "merge clips" is greyed. Yes,in case you're wondering, the audio is on the HD.
Your use of language is confusing me I'm afraid. You opened the AIFF file and set an IN then opened a QuickTime movie and set and IN and then with them both selected in the Browser (and the Browser the active window) that you cannot select Modify->Merge Clips... ?
I wasn't wondering anything about your audio, but now I'm wondering "What does 'the audio is on the HD' mean?"
2. The other issue is that the starting point is silent, so the only I know how to find the actual beginning is by counting frames back from the first sound. Is that what I have to do? Is would seem to me that there must be a "marker" that's not and "in" or "out" that will allow me to merge the tracks. No?
If you set an IN point in two clips you can merge them using the Merge Clips... command with the in points option. The IN points you choose can be anywhere and for anything. They can be where the clapper hits and sounds, they can be where a drum stick hits a cymbal, they can be where someone is clapping, they can be where a body falls from a building onto the sidewalk... Anything that helps you sync the sound with picture.

How can synchronize video and audio?? (Help me!!)

I was writen a Client/Server program, but in Client's part Video and Audio doesn't not synchronize thought i was used method in 2.0 programer guide (use Player control Controller). Any one can help me??

http://java.sun.com/products/java-media/jmf/1.0/guide/JavaMediaFrame.fm7.html

How to get video and audio while chatting with your PC friends.

Just download a program called ivisit.
http://www.ivisit.com/
Everything else I tried sucked. Nothing worked. Yahoo, MSN, AOL IM... they all crapped out. But ivisit rocked right out of the gate, and you can get it free.
WIth the lite version you get only one connection and it lasts for an hour. After the hour you lose video but audio and chat still works. You have to be disconnected fro the other user for a half hour for the video feed to work again.
But if your itching to connect to your family with your new iSight and all the other big name programs are disapointing you, then one hour is plenty of time.
ivisit saved my christmas.

I agree. iVisit was a lifesaver. I was regreting getting my iSight until I had a successful connection. It was truly a Macintosh program - easy to setup, intuitive, not too much tech stuff to resort to figure out how things work. I was unhappy with resolution, though. You have to pay to get good resolution.

How to run QT and Photoshop at same time?

Hi there, does anyone know how I can keep BOTH my Photoshop file windows AND a Quicktime movie open and running at the same time. I am trying to follow a set of QT tutorial movies that I downloaded from a podcast (and I've also tried using a Photoshop Tutorial CD adn same thing happens). The problem is when I try to follow along by having a Photoshop file open, the minute I click on the QT all my extra Photoshop windows (layers, brushes, history, etc) disappear, leaving just the file. This is no good because what I'm trying to do with the tutorial is to duplicate what they are doing in those windows. Of course when I click back into Photoshop they reappear but by this time the QT movie has raced ahead and the minute I go to pause it .... Photoshop goes again ... is there a way to keep all windows to both applications visible ?

Short of using a second monitor (mirror) there are a few tricks you could try.
Open the QT file and shrink the display size. You can do this by dragging the "grow" window (lower right corner) or using keyboard shortcut Command-0 (half size).
Adjust the Photoshop window to a smaller size and arrange the toolbars so you can "view" the underlying QT file.
Next is to keep your hands off the mouse (except in Photoshop).
The spacebar will start and stop playback of the QT file. Use the arrow keys (right and left) to "step" through frames.
Your workflow might be something like this:
Begin the QT file and pause it using the spacebar. Command-Tab (tab key) to switch to PS. Review the work and switch again via Command-Tab.
It will take some patience and practice to get the right combinations.
You can also gain some screen "real estate" by setting your display size to the highest possible settings. System Preferences/Displays is where you'll find these options.

Component video and HDMI at same time

Does anyone know if the AppleTV HDMI output and component video output are both active at the same time? (I want to send one to a plasma and the other to a projector, but I couldn't get anything out of the component output until I dosconnected the HDMI).

I think it would be too easy for us consumers if it worked as it should. I'd like to be able to set independent resolutions for Component vs HDMI AND have them both active, but it won't work like this. Bummer.
As to your problem, HDMI senses whether it is attached, and if it is attached, it takes precedence, disabling the component outputs. A simple albeit kludgy solution to your problem is to unplug the HDMI cable from the ATV when you want to use the Component outputs. (As your troubleshooting suggested... )

QT 7.1.5: How to merge Video and Audio tracks?

I have a movie without a sound track and a mp3-file which I want to merge. I know that both should have the same length.
First I opened the audio file, selected all, copied it - then opened the video file, selected all and pasted it. Sounds good and functioned properly.
Trying to start the movie on another Macintosh, QT asks for the mp3-file. What went wrong, what to do?
Greetings from the middle of Germany
Herbert

You failed to save the new file as "self-contained".
You should use Save As and check the box for self-contained.

What is the best way to make video and audio the same lengths for posting on Web?

YouTube recommends doing this to avoid sync problems. Maybe it will also make my videos run more smoothly. I'm talking here about random pauses I see in my movies on YouTube, not the uniform stuttering problem which I pretty much solved by redoing the movie at 30 fps instead of 24 fps. (Original is 18 fps Super 8 movie film.)
Anyway, there is no sound during my titles. The soundtrack starts about 17 seconds in, and ends when the ending titles begin. So what's the best way to add silent audio? The best I can figure is to take some existing sound, put it in where the titles are, and turn the volume down to zero. Seems real workaround-ish, so to speak, to me. It seems to work. I even cranked it up on headphones to make sure there was no residual noice. But I'm curious if there's a better way? No biggie if not.
Thanks.

I should have included the following:
1.) Why can't I make a silent project in GarageBand? I have to instead find a project with a long enough song, make an "iLife preview" of it (see (2) below), copy it from the iMovie Music and Sound Effects browser to the end of the movie, and then open the audio panel and turn the volume to zero. And all this so that video websites don't get confused by a soundtrack that starts in mid-movie.
2.) Why do I have to "render" them by the following process: Double-click a song in the iMovie Music and Sound Effects browser. You get a dialog box saying "The project "The Great Race" cannot be used because it was not prepared with an iLife preview. Would you like to open "The Great Race" in GB so you can save it with an iLife preview?" What I don't understand is why this new thing was introduced and why I have to do it via iMovie.

How to download video and audio files

Pl tell me how to download mp3 & mp4 files from fox browser

hello afrozahamed, please have a look at the following article which should cover your question: [[How do I download music, photos and videos from the browser?]]

How to send video and audio (videoconference) using JMF without using RTP

Hi everyone,
I am creating an application using JMF, a videoconference, but I would like to transmit the packets by myself without using RTP. I would have a socket (or virtual Serial Port -- > Bluetooth) and I would send the info that way. Is it possible??
Thanks in advance!!
Cheers

Yeah, you'd need to implement something like this for that.
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/RTPConnector.html]

How do i start video and audio at the same time in ios

How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");

If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

How to align or sync video and audio?

In Premiere 13, once I have added a video/audio clip and then either slow down the clip or add photos in between the clip causes the video and audio to be out of sync. How does one re-align or re-sync the clip once it has been edited? Thanks

mrsndmn
On what computer operating system is your Premiere Elements 13 running?
There are several ways to avoid disturbing an existing Timeline when you are adding to it.
1. Using what are called keyboard modifiers, such as Ctrl or Alt (Windows).
2. Grouping block of clips so that the clips move together
The following video tutorial is offered for informational and not promotional reasons
Premiere Elements: Arranging clips on the Timeline using modifier keys | lynda.com - YouTube
It uses a version of Premiere Elements earlier than 13, but the principles involved are the same.
The video and audio that are going out of sync.... are they linked or grouped before the addition to the existing Timeline?
After the fact, you will need to move the Timeline components back in place.
If the video and audio are not linked or group, you can
(a) highlight the clip, hold down the Alt key of the computer main
keyboard and tap the appropriate arrow key for a 1 frame per tap nudge of the clip.
(b) highlight the clip, hold down the Shift+Alt key of the computer main
keyboard and tap the appropriate arrow key for a 5 frames per tap nudge of the clip.
Please review and consider. If questions or need clarification on the above, please do not hesitate to ask.
Thank you.
ATR

How to Slice Video, and Audio at same time

Similar Messages

Maybe you are looking for