How to slow and speed up a whole project in logic pro 8

Hello!
I use Logic Pro 8 on my powerBook G4 17".
I can't find function to slow and speed up a whole project.
I need to prelisten and (maybe) change tempo of recorded audio for my project.
Can anyone please let me know how to do it?
Thanks in advance!
p.s. Yes, I know this function exists in logic Pro 9, but I'm very surprised not to find it in 8th edition of this wonderful app!

<Sample Editor>
            <Factory>
                    <Time and Pitch Machine>
Have a nice day!

Similar Messages

  • Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

    Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

    This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
    Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
    Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
    Also, you have no MIDI keyboard? Are the pedals both "standalone"?
    I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
    But much better would be to configure the pedal(s) correctly.

  • How do you access T-Racks EQ plug-in in Logic Pro 9?

    I just installed the T-Racks EQ plug-in I got for free for attending a music seminar and I can't figure out how to access the insert from within Logic Pro 9. I have several other third-party plug-ins/inserts installed and have had no problem finding/accessing them within Logic.
    I feel stupid for asking, but does anyone know how to access the T-Tacks EQ insert from within Logic Pro? Thanks.

    Thanks for the suggestions Eriksimon. I checked in the Library>Audio>Plug Ins>Components folder and there were no t-racks.component files in there. You are correct that there is a stand-alone shell for T-RackS and I downloaded that after I tried installed the EQ component three times without any success. I then noticed that the EQ component was ver 1.3 and the T-RackS shell was version 3.0, so figured it might be that I was trying to install a version of the EQ that was too old. Once I installed the T-Racks 3.0 shell, the Classic EQ showed up in the T-RackS stand-alone shell, and it is also now showing up in Logic Pro. When I click on one of the Insert buttons in the channel strip, the T-RackS Classic EQ shows up under "Audio Units/IK Multimedia", which is where I originally expected it to show up.
    Thanks again for your assistance.

  • How To Open REX2 ReCycle Files In To The EXS24 Logic Pro 9 ?

    Hi,How To Open REX2 ReCycle Files In To The EXS24 Logic Pro 9 ?

    There is a variety of options.
    See the Instruments manual, p302 "Converting ReCycle Files to EXS Instruments".

  • How to make and build a dinamic web project

    hi people, i just downloaded the flex 2 beta 3, and installed
    this "separated" of the eclipse application, but my question is ..
    how i have to create a new dinamic project, that contains the
    Web-Inf folder and Meta-Inf folder..?? off course that i have the
    java sdk installed, the eclipse and the flex environment....
    can anybody help me with this?? i will really really
    apreciate this!!
    thanks in advance!!
    JP.

    quote:
    Originally posted by:
    ntsiii
    Also, you will be using Tomcat and Java on the server to
    provide data to your client-side application.
    it´s rigth..
    quote:
    You have several options, including RemoteObject,
    Webservices(Axis?), or HTTPService(it is very simple to use JSP to
    save and retrieve data and send it to the Flex client)
    All this options, in what tool are implemented?
    quote:
    Post again if you get stuck.
    By the way, General Flex questions should be posted in the
    General Discussion forum. This one is for Flex Builder questions.
    Tracy
    yes, i know, i searched the site looking for a tutorial or
    something that refer how to related a website and a data in a
    database.... in order to make a form to manage the data..
    thanks a lot!!!

  • GPO and RA plug-ins not working in Logic Pro 8.0.2

    I have installed RA and GPO on my Mac Book Pro. When I open Logic Pro they are not appearing in the Plug-in list. Kontakt 2 is but won't let me load individual instruments for GPO. The strange thing is I also have a copy of Logic Express and both RA and GPO work fine here (even though they don't pass the AU validation). They also work as stand alones fine. In Logic Pro, RA and GPO do not appear in the AU validation list. Can anyone help? I have all the latest updates as far as I am aware. It's very annoying!

    There's no Auval or RA or Garritan Personal Orchestra in the Audio Units Manager in Logic Pro. Though Stylus RMX that I also use and Kontakt Player 2 are there and successfully validated. The RA and Kontakt Player component are exactly in the place you said they would be.
    I've since discovered that RA does not in fact work in Logic Express. As for whether it's loading up in Rosetta or PPC version - how do I tell that?
    I really appreciate your help but I'm still stuck at square 1. Any more suggestions?!!

  • How do I run a Midi Light show from within Logic Pro?

    Hello,
    I'm trying to figure out how to run a midi light show along side or within logic pro. I currently run .wav synth files through logic into an Onyx Satellite into the PA system, I want to run a lights show that fits perfectly with each part of the songs running on logic pro. I need tips on everything: hardware, what intelligent lights I need, how to best program and set this up.
    Any help would be greatly appreciated
    Message was edited by: Host <to clarify Subject>

    Hi
    I use the NSI MC1616 midi controller. with it you can control 16 separate banks of lights and store 16 scenes. the unit uses midi program change messages for each scene and CC #1 info for fade rate. Since the MC1616 sends the program info midi out, I use it to send the commands to logic in real time, playing along with the song, pressing the scene buttons, to program the lighting cues.
    Hope this helps
    Don

  • How do i hook up The Virus Ti Polar to Logic pro 8

    i just recently bought the virus ti polar and the m-audio firewire solo and i have no clue on how to hook the virus up into logic 8? or do i run it threw the firewire solo interface and then into logic 8 im very frustrated. i dont know where to start and what setting to use or even anything. I just dont want to be lost with this forever because i paid 2850 and i want to use the virus to its full potential. so if anyone can help me setup the virus ti polar into logic pro 8 it would be much appreciated.
    Thanks again,

    mate ... thats what the manual is there for it has step by step instructions.
    or if you want video go here.
    http://www.access-music.de/downloads.php4?product=virustikeyboard
    although the link doesnt seem to work.
    goto support/virus ti series/misc files/ ... and youll see the video tutorials.
    they will guide you through. and use the manual.
    also try searching http://www.virusti.com/forum/
    Message was edited by: cooltempo

  • Hi, I've just up-dated my OS in my MacPro 3.1 from 10.5 to 10.6.8 and can't seem to install my Logic Pro 8, any advise? can I install my Logic 8 in the 10.6.8 OS? Thanks

    Hi, I've just up-dated my OS in my MacPro 3.1 from 10.5 to 10.6.8 and can't seem to install my Logi Pro 8, I can install the libraries but not the program, is it possible to install or do I have to up-grade to Logic 9? Thanks

    It's either that Logic 8 is looking for the Rosetta emulation program or that Logic 8 was previously installed on this OS, in which case you will have to remove some preference files and install receipt.
    I think the Rosetta emulation is downloadable for SL.

  • How do I setup an Allen & Heath QU-16 on Logic Pro X?

         Hello,
    I have a Allen & Heath QU-16 with all current firmware, I have read that this mixer does not need any drivers, but I downloaded a driver from Allen & Heath's website. It successfully connects to the Macbook Pro that I am using and it is detected in Logic Pro X. The mixer is connected to microphones picking up a drum kit, and the audio reaches the QU-16 and plays out monitors just fine. The problem is that the audio doesn't register in Logic. I have tried using different inputs, turning on input monitoring, and I have the input and output set to the QU-16 in the preferences.
    Any help would be appreciated, and I would be more than happy to elaborate on what I have tried already.

    Kmnicholas257 wrote:
    I can't find the chapter you mentioned, is this in the user guide that can be found on google search?
    This should take you to the documents page, download the User Guide. The chapter is quite a ways down,   "USB Audio Patch"
    http://www.allen-heath.com/ahproducts/qu-16/#tab4

  • How do I make a Tascam FW-1082 "work" with Logic Pro?

    I just purchased logic pro and a tascam FW-1082. im trying to get them to work together, but i dont really know where to start. I ran the tascam driver, and did some configuring in logic, but it doesnt seem like they are working together seamlessly. my previous workflow involved a digi 002 with pro tools, and id like to configure logic and the tascam and logic to work like that. so, what do i do?
    1.5 G4 12" powerbook/ single 1.8 g5 powermac   Mac OS X (10.4.4)   logic Pro, tascam FW-1082

    It emulates a Mackie Control which Logic supports. Open the Control Surfaces setup/install window, make sure MIDI ins and outs are both connected, turn on the unit and it should appear a in couple of seconds. If it doesn't, manually install it. It's reasonably clear and the 1082 is even listed in the install window. You shouldn't have much trouble.

  • How to Download external MIDI Library to improve performance in Logic Pro 7

    MIDI files are on desktop. For test run, used Logic Pro 7 File>Import>Open file type MIDI files. Found song.mid in Applications file, downloaded to song#.Iso Arrange Score, no sound, though meters activated.
    What is #.Iso Or is it #.1so?
    Extensive trying to make it work and reading of manuals, and online manuals were of no help so I'm here for help.
    Most Sincerely,
    lakesidetrombone, a dinosaur
    Mac Book Pro
    Logic Pro 7.2.3
    Finale 3.0 to 2007
    Korg Trinity Pro
    Yamaha SY77
    Mackie CR1604-VLC

    Hi,
    Hit the Caps Lock key.
    J.

  • HT4461 I am taking private music lessons.  My teacher and I agreed that learning to use Logic Pro X will be helpful to my progress.  If he buys a copy, do I have to buy a second copy in order to use it?  Or can we both use it based on purchase?

    I am taking private music lessons.  My teacher and I agree that it will help my progress for me to learn use Logic Pro X.  If he and I both use Logic Pro X only related to his teaching me, do we need to make one purchase or two purchases of Logic Pro X? 

    First, thank you for your thoughtful and quick response.  However, your response seems to confirm my reading of the license agreement that I do not need my own licensed copy of the software.
    Secondly, I apologize for not specifically noting that I am talking about running Logic Pro X on a MacAir. 
    Thirdly, as I read the license agreement, and as you interpret it, if Person A purchases Logic Pro X, and chooses to allow Person B's computer to be one of her five authorized computers to access iTunes/Mac App Store content, then it is not a violation of the license for both Person A and Person B to use Logic Pro X, plus any other content that Person A has or will purchase. 
    I do not want to commit piracy, of course, but as long as Person A does not violate the five authorized computer limitation and does not levy a charge on Person B for allowing his computer to be one of the five authorized (which would mean Person A is reselling the software, music, podcasts, etc.), I do not understand why Person A allowing Person B to use Logic Pro X is piracy any more than Person A allowing Person B to access iTunes Music. Obviously, if Person A deauthorizes the computer owned by Person B, then Person B can no longer use Logic Pro or listen to or use any other content that Person A has purchased from iTunes.
    So if my teacher 1) only permits me, among all of her students, to have a computer that she will authorize, 2) has not reached the five computer authorization limit, and 3) does not charge me for listening to her purchased music or using her apps, including Logic Pro X (my lesson fee will be the same with or without her decision to authorize my computer), then I do not see that as piracy.  In fact, it seems content sharing is explicitly permitted by Apple, as long as it is limited to five authorized computers.  As for updates, she would apply them to her licensed computer on her MacAir and then authorize the update on my MacAir.
    If a teacher tried to authorize more than five computers (which the system does not allow one to do) and/or charged students for using his/her purchased content, that is piracy.
    Am I missing something?

  • How do I record vocals from a USB mic on logic pro x

    How do I record vocals on Logic Pro x using a USB mic

    Honestly... have you bothered to read any of the Logic manual?
    First you have to configure Logic's audio Preferences to set the USB Mic as the Input device, then create a few audio tracks.
    There a plenty of online help videos on You Tube.

  • My audio aggregate device is not stable in Mountain Lion, it was fine before I upgraded from Snow Leopard - every time I reboot the computer it loses the configuration and so it is not available in Logic Pro

    My audio aggregate device is not stable in Mountain Lion - it was fine before I upgraded from Snow Leopard. Every time I reboot the audio aggregate device (MOTU TRAVELER, MOTU PRE8 1, MOTU PRE8) has to be reconfigured so that it is available within Logic Pro.

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

Maybe you are looking for