How to slow sound effect down (stretch out)?

I exported a clip from final cut pro. Now I want to slow down the "whoosh" sound effect so it fits my piece correctly but I can't figure out how. When I select the layer everything is greyed out pretty much from the menu options at the top of the screen?
Thanks!

Time Stretch under the Process menu. I think it only works in the wave editing window, so for a multitrack thing you'll need to double click the file and open it in that editor.

Similar Messages

How to add sound effect to a slide in keynote on IPAD1

How do I add a sound effect to a slide in Keynote on a IPAD1?

MattiMattMatt wrote:
I'm looking at GB 11 right now, so I don't know if this translate exactly to '09, but I think it's similar if it doesn't:
Looking at the shown Master Track, on the automation menu of options on the track (that lists volume, pitch tempo - whatever you want to send a curve through) there's another choice on the bottom: "add automation." You select this which gives you a dialog box and the option to add an automation curve for any of the Master Effects you've added in that Edit box on the right hand side.
Clicking a parameter in that dialog box will add the category to that menu, and then you can create a curve for it (using a two-dot quick ramp up from 0 to whatever value you want, then a two-dot ramp down at the end) for just the measures you want.
Ive done Add Automation, and Automatic Filter is now available on the "Add Automation". (Although Frequency, Resonance, Mode, Intensity & Speed are down as 5 seperate tick boxes under Automatic Filter and I'd like to just be able to select Automatic filter and not have to change each of these 5 independently and it just work from what I have set it to manually on left hand side).
I've added points/dots to the curve during the section I need it, but this moves the filter up and down over that point AND from the very start of the song to the very end of the song.
Where does the point/dot need to be/set to at the Start of the song upto the point I want the filter to kick?
So there would be NO filter on the track from Bar 1 to end of Bar 9
Then, where does the point need to be/set to at the end of song from the end of the filtered section?
So there would be NO filter on the track from Bar 13 to end of the song?
So just to confirm I want
Bar 1 to end of Bar 9 - NO FILTER
Bar 10 to end of Bar 12 - Filter
Bar 13 to end of song - NO FILTER
Thanking you in advance for a speedy response.

How to manage bom effective in and out dates

The parent-child relationships in my BOMs have effective in and out dates. The in date is when the child part starts to participate in the BOM cascade. Then out date is when it stops participating.
My questions is, how to express this in IOP speak. Specifically, when I want to say is,
dependent demand = dependent demand + <total demand from parent> * if (today is in [BOM.in_date .. BOM.out_date], BOM.usage, 0)
I'm sure it can be done, just haven't been able to figure out how. I poked around the function reference in jdocs, but haven't come up with a way to do this. Seems like the key here is to construct locations out of the dates I pull out of the rowsource. Once I have that, I should be able to use the in() and range() functions.
Thanks for your advice.

Matt
Yes, this is fundamental and supported well. Unfortunately, it used to be custom code before the release coming out soon. In this release, we have introduced generic functions to achieve that. The in_date and out_date are function of the relationship I assume.
Here is what you could do with the new release -- remember this should be coded in the rolldown/rollup formula --
dependent demand = dependent demand + <total demand from parent> * if (isCurrentDateInRange(
lookupDate("BOM_STRUCTURE_RS", property("BomDim", "name"), sourceSparseMember("BomDim"), "start_date"),
lookupDate("BOM_STRUCTURE_RS", property("BomDim", "name"), sourceSparseMember("BomDim"), "end_date")),
lookup("BOM_STRUCTURE_RS", property("BomDim", "name"), sourceSparseMember("BomDim"), "SCALE_FACTOR"), 0)
lookupDate and isCurrentDateInRange are introduced now.
Lookup in general is a cool function that lets you do arbitrary query to rowsource. It is like table lookup and it is efficient within a block calculation.

How to add sound effects to recorded sound?

HI there
I am making an app which will record ur voice and then add sound effects to it. How can i add those sound effects such as a higher pitch

Hi AhmadTheXboy,
Actually this forum is to discuss the VS IDE usage, this issue would be related to the specific language development.
Feng Chen shared us some samples here:
How
do I capture sound?
The following threads is about the similar issue, they use the VB language in winform apps.
How
to add music and sound effects to a Windows Form Application?
how
to create sound recorder
Hope they could provide useful information for you.
If still no help, please select the correct language development forum here:
http://social.msdn.microsoft.com/Forums/en-US/home?category=vslanguages&filter=alltypes&sort=lastpostdesc
Sincerely,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

How To Stop After Effects From Knocking Out My Internet Connection As It Is Downloading?

Greetings,
Yesterday, January 20, 2015, I purchased an annual subscription to After Effects. And, after numerous attempts at downloading the software with the same abysmal results, I am now going to the forums for a possible remedy. Everything goes well in beginning my download, including getting my McAfee Anti-virus program to accept Adobe Creative Cloud, however after a few minutes, the download process knocks out my Internet connection, forcing me to re-boot. I do receive two back-to-back error messages; none of which are listed by Adobe set of error messages in their FAQ section.
The first one reads: "Core: Creative Cloud - Application Error. The instruction at 0x100014a0 referenced memory at 0x100014a0. The memory could not be written." The second error message is likened to the first, only with a different number...
"94% Complete: explorer.exe - Application Error. The instruction at 0x80001610 referenced memory at 0x80001610. The memory could not be written."
Finally, do you know if I can bypass all of this trouble by having Adobe After Effects disks shipped to me? Any assistance will be greatly appreciated.
Joy in the Lord,
A. Landis Jones

Greetings,
And thank you both, Mylenium & Dave. After I compose this note, I am going to mark your answers as correct. I just wanted to write this qualifier, first. I tried to do as both of you suggested, however, I could not figure out how to disable McAfee Anti-Virus. I did manage to turn off McAfee Firewall. And when that was done, I tried to download After Effects. However, that trick did not work the first couple of times I tried it. A few re-boots later, After Effects (as well as some unknown program I did not expect called Media Encoder) finally downloaded on my computer.
After I began this thread, I recalled that, oftentimes, when I view YouTube videos online, the same thing happens - my Internet connection gets disrupted. Then I remembered that the trouble began when my computer crashed and I tried to re-install Windows 8.1 Pro. So, maybe that is the real culprit - my system crash, that is. A little while ago, I tested viewing YouTube videos to no avail. So, I am suspecting that your solution to turn off my anti-virus (in my case, my firewall) did the trick, and I thank you two, Mylenium & Dave, mightily.
May you have many blessings.
Joy in the Lord,
A. Landis Jones

Sound Effects folder greyed out, why?

As with the title!
We need our noises! Thanks

MacFail wrote:
Supplementary updates installed by decentralising software update.
Glad you fixd this…but can you explain decentralising updates?
Thanks.
Russ

Adding a sound effect

Now that I have several clips in the timeline, I want to add some sound effects. I want the sound effects to be timed to actions in the clip, and I want the background audio to mute when the sound effect plays. Guys, I am not laze--I have been searching and searching the electronic documentation and I cannot find what I need.
Whichever is easier for you--can you tell me where to find this in the "manual," or can you explain how to do it?
Thanks,
Ben

it sounds as if I have to manually make the adjustment for the background audio level to decrease when the sound effect is played.
FCE provides a lot of control over all details of editing, but you have to give the correct "instructions" to do what you want.
The basic point is that you must stack the "boing" sound below the audio clip that is linked to the video you captured (e.g. on track a3), move it right or left till the sound is synchronized with the bouncing ball and then listen to the result. You might not even need to lower the volume of the captured clip; what I suggested in my previous answer was for effects that had to substitute the original soundtrack. A "boing" might simply be on top of it. In any case it's up to you to make this decision. And if you decide you still want to lower the original volume you may follow my previous instructions.
Just a note: if you use iMovie you have to do basically the same; not much difference in this case (in iMovie though you do not see the sound track linked to the captured clip, unless you explicitely Extract it).
how make the sound effect happen at a specific time--picture putting a "boing" sound as a ball bounces. How do I do that?
See above: just drag the "boing" clip right or left till you get syncronization. You may also set Show Audio Waveforms in the Timeline Options of the Sequence Settings (select the sequence and cmd-0) and the waveform of the boing may be of help in this operation.
I hope this is clear
Piero

The sound effects volume is all the way down. It pops on for a second, then disappears. I can't find it in settings. How do I get the sound back?

The sound effects volume is all the way down. It pops up for a second once in awhile and then disappears. I can't find it in the Setting. Music sound plays fine, but no sound on my apps. Any idea how to fix it?

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

I just upgraded my 2008 macbook pro to OS X Maverick from Snow Leopard but my computer is running a bit buggy and slow. How do I downgrade back down to snow leopard?

I just upgraded my 2008 macbook pro to OS X Maverick from Snow Leopard but my computer is running a bit buggy and slow. How do I downgrade back down to snow leopard?

You would reinstall 10.6 using your installation DVD.
Out of curiosity, how much RAM do you have? Recent versions of OS X really shine with 4GB or more.
Matt

Slow motion effect results in an unwanted high pitch sound

whenever i apply the fast/slow/reverse effect to a clip, a high pitch sound is created...how can i get rid of this without extracting the audio of the clip (there is no high pitch prior to applying the slow effect)?

Hi Darin,
... changing the speed of a clip HAS to change the pitch of audio.... have a look at the JES Deinterlacer... it has some nice, elaborate slow-mo effect......

After upgrade to iOS8, very slow, no volume slider bar, no volume through the iPad although the headphones work. My volume slider bar now reads"Sound Effects"?? Mute is off, need help. So frustrated!

I need help! After upgrading to iOS8.1.2 , my volume slider bar disappeared and is now "Sound Effects" ??? I have no external sound. Do have sound through headphones. Mute is off. Have tried resetting several times with no luck. Frustration level is building as I have wasted hours now on this. Any help would be greatly appreciated!

I do not think apple will do much to help you under warrenty, as this was caused by a fall. (alas!)
I think the case is, as you suggest, jamming the rocker down, and it may have damaged the swith itself. Can you carefully lever it out of the way? Very very carefully. If it is already broken, there is not much harm you can do by trying.
If it is just the switch being jammed, you might be able to move it out a little. If it is the swith itself, you will need some real service after your three hour drive. You might check your loacl area for a closer service repair source.

How can i get rid of sound effects icon in middle of screen?

How can i get rid of sound effects icon in middle of screen?

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

How Do I Get My Sound Effects back in iMovie'11?

I recently lost my mac's memory due to software issue. But now that everything is back in order, I found out when i opened iMovie'11 that my sound effects are missing. Does anyone know how to get them back?

Nevermind. They Myserious Reappeared.

How to add new alert sounds to Sound Effects in Sys. Prefs

I'd like to add a sound (it's in MP3) to the Sound Effects in System Preferences. How do I do this?

Hi Craig, if it isn't playing in the actual folder then something went wrong in your conversion. Exactly how did you do the conversion? And how did you get it out of iTunes (if that is what you used for the conversion) to use it as a sound effect?
I have a one second piano chord in mp3 stashed away in a sound collection folder. I double click it and it opens in iTunes. I then go to iTunes Preferences, click on Advanced, then click the Importing tab, and change "Import Using" to "AIFF Encoder" (my default is MP3 Encoder) and click the OK button. Go back to the regular iTunes window and select your mp3 file, then go up to the Advanced menu and select "Convert Selection to AIFF"--it should convert it very quickly. Grab the new aif file and drag out of iTunes window onto the Desktop. Do GetInfo on it and change the extension to .aiff (iTunes exports it plain name.aif). While you are in GetInfo verify that it plays in the Preview section. Now add it to the /System/Library/Sounds folder. Oh, and remove the one that doesn't work. You'll have to authenticate to do that too.
Francine
Francine
Schwieder

How do i disable sound effects for titles in imovie on ios?

Hi,
I just got imovie for my iphone. Not bad so far.
Except: how do I turn off sound effects for titles? I just want to add titles to my movie like regular imovie on my mac (or even windows movie maker). However each subtitle has a sound effect -
How do I turn these off or disable?
thank you!

No.....
But....
http://www.logicprohelp.com/forum/viewtopic.php?t=10694
Note: See Rounik's post further down the thread.. for the FX version....
or....
Personally I use Ski's method documented here...
https://www.logicprohelp.com/forum/viewtopic.php?f=1&t=85291

How to slow sound effect down (stretch out)?

Similar Messages

Maybe you are looking for