How to smooth out zooming/scrolling image that jerks (CS4)?

Hi guys/girls,
Is there any way that i can smooth out images that zoom in/out with normal classic tween. they are so jittery it looks terrible. I even have a little bit of easing and frames per second set to 30.
any info much appreciated!
Jeff

Hi flashfever,
thanks for responding. can you elaborate on how i can use that? is it AS for the 1st frame or on the movie clip itself? etc
in this case, i have the image fading in and enlarging from 70% to 100% in the same tween. its very jerky.
thanks for your help so far!
Jeff

Similar Messages

How can I have a browser image that scrolls with images on top of it scrolling in tandem -

How can I have a browser image that scrolls with images on top of it scrolling in tandem - so the background is a hexagon pattern with small images inside some hexagons and I want them all to be scrollable as a user uses the browser scroll bars. At the moment the background image jumps when I preview so the small hexagons all become out of alignment. Any tips appreciated. I have browser image set to tile - pinned at the middle and set to scrolling - the small images are not pinned -

Thanks for your answer - The images on the top layer are also links and change to show they're links on rollover - so I wanted to keep them as separate graphics - and it works to a point but when I preview the page in a browser the tiled browser image always moves no matter how I pin it and then everything becomes unaligned. Any further suggestions appreciated.

How do I crop around an image that is not straight (i.e. crop a country out of a map) on pages?, How do I crop around an image that is not straight (i.e. crop a country out of a map) on pages?

How do I crop around an image that is not straight (i.e. crop a country out of a map) on pages?, How do I crop around an image that is not straight (i.e. crop a country out of a map) on pages?

If you have an image that you want to crop for insertion in a Pages document, you can use a program like GIMP to edit the image.

How to change the default BC image that shows in the address bar?

Does anyone know how to change the default BC image that shows in the address bar? I want to swap it out so the client logo shows next to their URL.
Thank you!

Hi,
If you are trying to change the favicon for your site,
You can do it from Site Manager-> Page template -> Default Template
Look for the code <link type="image/x-icon" href="/Path for your image" rel="icon" />, and Click save.
Now where you will use this template, it will display your favicon for that webpage instead of BC favicon. You can define it on Page directly if you are not going to use template.
Please let me know if you have any doubt.

How to find out the JVM thread that is consuming high CPU

I am using WL 10.3, JRockit JVM on Linux. I have taken thread dumps. How to find out the JVM thread that is consuming high CPU?
I know how to map it Sun JVM on Solaris. I haven't done in on JRockit so far. Please advise.

Check out some of Marcus Hirt's blog entries for details about how to use JRockit Mission Control. It's a very nice tool that should provide a lot of insight:
http://blogs.oracle.com/hirt/

How do you edit the template image that appears at the top only in portrait mode?

I am using a customized version of the iBooks Author template which has the space image. I have replaced the images for the book cover, chapter and section. But I noticed that when you rotate the ipad to view the entire TOC, the original space image is still there. How can I edit the template image that appears at the top of the Table of Contents only when you rotate the ipad in portrait view?

I just tried w/that template - switched to Portrait mode...tapped once to select that image....cut - gone. Switched to Landscape...not there. Back to portrait...still gone.
What process did you use?
Can you repeat your issue with a fresh book?

How to find out the user iD that previously deleted?

Hi,
My client has deleted some user ID in SBO v2004b. HOwever, when the client did that, he forgot to "deselect" the license that granted to the users going to be deleted. What's worse, he forgot the user ID that he deleted.
It makes the license available decrease. So, how can i find out the user ID that i previously deleted? Or any method to retrieve the correct number of license originally. ?
Thanks for your advice

Hi,
Have a look at the FAQ weblog, Missing licence topic:
/people/ibai.pea/blog/2006/07/26/sbo-faq
Regards,
Ibai Peñ

How to find out FICO user exits that are used by User

How to find out the FICO user exits that are used by user.

Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
pls assign points if helpful as a way to say thanks.

How to smooth out discontinuous spacial distribution gradients

Hi all.
I'm controlling a linear motion device, and need to generate displacement paths for it to obey. What I'd like is to smooth out the 'sharp edges' in my profile data (for example, at points where it may go from a slow forward motion to a faster forward motion). Technically, this is removing the discontinuities in the spacial distribution differential, but in other words all I need to do is "smooth my data".
I've mimicked what I want to achieve by putting some hand-created numbers into this graph -->
The yellow line is my original profile data. You can see that I'll be moving the device from position 45 at time 0 to position 52 at time 5 and finally position 53 at time 9. This is fine, but I'd like to smooth out the motion a bit and avoid that nasty elbow at time=5 a bit.
The blue line is what I'd like. A smooth run from position 46 at time 0 to position 53 at 9 seconds, that preserves the velocities (gradients of the profile line) at the beginning and end. The reason for this is that the motor will arrive at position 46 (time 0) at the velocity inferred by the first gradient, and will continue beyond position 53 after time=9 at the speed inferred by the end gradient. Therefore I must not change the gradients of the line at the beginning and end.
I've tried using the many Signal Filtering techniques LabVIEW has available, but I've found that they create problems:
1. They don't preserve the beginning and end gradients, and
2. They tend not to like the very few sample points I have here. (If I interpolote the yellow line to create intermediate points, the filtering works better, but still suffers from point 1)
I've tried using the B-Spline curve fit, but that seems also not to respect the gradients.
I've tried the cubic spline fit, but that doesn't return the extra points I need to create the blue curve the way I've shown here.
Does anyone have any advice? I thought this would be simple, but I'm a bit stuck now but I suspect that there'll be someone out there that's had to do this too.Naively I expected there to be a simple function called "Smooth Data", but clealy not.
Many thanks in advance for any responses received.
Thoric (CLA, CLED, CTD and LabVIEW Champion)

In my copy of Haliday Resnick and Walker there was a note that talked about Einstein and "working in divine issolation" where he was not distracted by others telling what was leagl and what wasn't. I recall that note when I propose idea like the following that some math type will tell me has not physical meaning and dismiss it off-hand. But since I don't limit myself to what is allowed or legal...
See this thread starting a post #5.
Summary:
CC's best attempt at smoothing the curve was shown in this plot.
Using my non-legal technique, I got these results.
I a nutshell:
When yo ufilter you loose data at the front and back-end with the number of points of data loss being determined by the order of the filer. By first pre-pending and appending the same data set reflected about the first and last point, we trick math into telling us what it woudl refuse to tell us otherwise.
maybe this will help you,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

HOW TO- Smooth out your animation jittering and tearing

I've found a couple of workarounds that will smooth out your animations. There are JVM arguments that you can pass that allow you to set the scenegraph animation framerate and vsync properties. Increasing the framerate pulse and settig vsync to true can smooth out most of the animation jitters we're experiencing. The downside is that this is going to cost you some CPU time.
-Dcom.sun.scenario.animation.vsync=true -Dcom.sun.scenario.animation.pulse=500I also saw that the JavaFX team has made solving these animation issues a top priority for the next release.

Nah, forget it. This logo needs to be redrawn from scratch.
Mylenium

Here is How you close out an iPhone app that is running in the background

How do you close out an iPhone app that is running in the background in the new iOS 4? We’ve had more than one reader ask this question since the launch of the new iPhone operating system, and the iPhone 4, last week. Some have asked about this due to battery drain concerns, and others just because they want to be able to shut down a backgrounded app.
So this seems as good a time as any to share a quick tip on how you can force apps to close in the new iOS 4.
There are two ways to fore an app to close down under iOS 4. The first is by doing a ‘force quit’ on the app, just as we have done under the previous version of the iPhone OS. To do this, you press and hold the power button while you are in the app you want to close down. Wait for the ‘Slide to power off’ bar appears across the top of the iPhone – then don’t hit Cancel, but instead just hold down the Home button continuously until the app closes and you drop back to the home screen.
The much easier method now available in iOS 4 is to use the Multitasking bar to close any app you want. Here’s how:
– Double tap the Home button to bring up the Multitasking bar
– Press and hold anywhere on the multitasking bar until the icons on it start to wiggle.
– While they are wiggling, each icon has a Minus sign symbol above it.
– Press the Minus symbol above any app to close it down.
That’s it. This will work for any app you want to close, including the Apple built-in apps like Mail and Safari etc.
Hope this quick tip is helpful to some of you who are getting to know iOS 4.

The apps on the bottom are recently accessed apps. Instead of closing when you exit the app they go into a suspended state, and will load faster when you next launch them. Unless they are a streaming app (like Pandora) they do not use any power when they appear in the active app list.
This information, as well as the OP's post, are in the latest user guide. I guess nobody reads manuals anymore

How can I create a DVD image that PC users can retrieve and burn...

I need to create a DVD disc image that PC users can retrieve from a private network share and burn to a blank DVD. Once burned, it needs to auto-start at the Menu. The master works fine. Images burned using the Mac Disk Utility work fine. But I have little control over who will download the image or the method by which they will burn it, so I need to provide visitors with guidance. Thank you in advance for any assistance you can provide.

Thank Jeff for this one.....
http://homepage.mac.com/geerlingguy/macsupport/mac_help/pages/0023-convert_dmg_imgiso.html
I've also heard that you can just copy an ".img" iDVD image to a pc, change the extension to .iso and then burn with Nero, etc. But I haven't tried it myself.....
John B.

How do I include a dynamic image that changes?

I need to include a photo based on selecting a user from a
datagrid - using the user id I can get the image from a url where
the end path uses the userid + .jpg. All of this works for the
first image but when I click on another user I get the same image
as previously shown. I'm using:
<mx:Image source="{getImage()}" /> where getImage is a
function that is:
private function studentImage():String {
var baseurl:String = "
http://nuweb.northumbria.ac.uk/photoids/";
var studentID:String = dgStudents.selectedItem.studentid;
var url:String = baseurl + studentID + ".jpg";
reeturn url;
since that didn't work I tried removing the source attribute
from the <mx:Image /> and instead when the user click I'm
calling the same function but with a void return using the
Image.load:
private function studentImage():void {
var baseurl:String = "
http://nuweb.northumbria.ac.uk/photoids/";
var studentID:String = dgStudents.selectedItem.studentid;
var url:String = baseurl + studentID + ".jpg";
var ldr:Loader = new Loader();
var urlReq:URLRequest = new URLRequest(url);
ldr.load(urlReq);
imgStudentPhoto.load(ldr.content); // imgStudentPhoto is the
id of the Image component
This doesn't work either - in fact whereas the first method
shows an image that doesn't change this shows no image at all.
Please, any suggestions?
Thanks, Rob

When binding to a function, there needs to be an argument to
tell flex when to execute the binding.
Or, declare a [Bindable] string var, and in a change handler,
build and assign the source string to that var. Bind to the var.
The simplest is not to bind, but to build and assign the
source string in the change handler function.
Tracy

How do you create a scrolling banner in Dreamweaver CS4?

How do you create a scrolling banner/marquee in DreamWeaver 4? I can't find anything about scrolling banners in the documentation or in the several books I've searched. Thanks.

Dreameaver can't create something like that out of the box, you need to use some type of script for the 'scrolling' to work.
This is pretty good, with lots of variations:
http://sorgalla.com/jcarousel/
You may find something listed here that may give you an idea:
http://www.1stwebdesigner.com/resources/57-free-image-gallery-slideshow-and-ligh tbox-solutions/
or go over to www.jquery.com (that's one of the popular frameworks being used at the moment for image slidehows/banners/galleries etc).
Nadia
Adobe® Community Expert : Dreamweaver
http://www.perrelink.com.au
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/
http://twitter.com/nadiap

How can I insert a single image that resizes to full screen when I pinch it out?

Hey there. I'm looking for a feature (similar to the gallery widget) where I can have 1 small image and when you tap or spread your fingers, it resizes to full screen. Is this possible?

Thanks, Caleb, that worked!
But I have a follow up question. So if I use Edit Mask so that I can only see a portion of the image, when I tap the image, I only enlarge the visible portion. In fact, it isn't even enlarged: I only see the same portion of the image at the same size. This is not the behaviour you get with the gallery widget. Is that also your experience, or am I missing something?
In thinking about it, I can probably make do with the gallery widget in the cases where I would like this behaviour, but it seems like this should work.

How to smooth out zooming/scrolling image that jerks (CS4)?

Similar Messages

Maybe you are looking for