How to...snapshot with delay using Webcam Center ?

Hi all,
I was wondering if I could take some snapshot with a certain delay using Webcam Center ?
Meaning I click on the snapshot button and I got like 0 secs to move on before I got the screen.
And if that's not possible using Webcam Center, would you know any other soft doing that ?
Thanks for your time.

I have done this in the past by using a command line version of putty called plink.exe
http://www.chiark.greenend.org.uk/~sgtatham/putty/
call plink.exe with the systemexec.vi using the command line parameters of any ssh commands
- James
Using LV 2012 on Windows 7 64 bit

Similar Messages

  • How to obtain object number using cost center??

    hI.
    i need to obtain all the cost elemnts of a particular cost center..
    cost elemnt can b fetched from COSP using OBJNR..
    How do i obtain OBJNR using KOKRS,KOSTL????

    Hi
    From the table
    CSSK
    take the related Cost elements for a cost center.
    Concatenate the cost element with KS and other Orgn unit
    and pass to the Costing tables
    see an entry in those tables you will know what are the fields in OBJNR that are concatenated
    Reward points if useful
    Regards
    Anji

  • How to chat with people use AIM?

    i am use I-chat 4.0 ,mac OSx10.5.1
    how can u chat with people use AIM?
    he use can chat with people who is .mac or .aim.

    Hi
    For a Mac person just starting out on iChat, a good place to start is here:
    http://www.ralphjohnsuk.dsl.pipex.com/page2.html
    If AIM is being used by a Windows PC user then setting up as per http://www.ralphjohnsuk.dsl.pipex.com/page12.html#_Service is required.
    Steve

  • How to authenticate with MSISDN using REST style in openSSO

    I need authenticate with MSISDN using the REST style in openSSO.
    So, can anybody tells how to implement it? I am aware of implementing with username password by calling the URL as /opensso/identity/authenticate. If i want to authenticate using MSISDN how we have do it using REST in openSSO 8.0.

    Hi Vijay,
    I hope there is something related to MSISDN in the administrator Guide and Administrator Reference. Administrator reference contains the MSDN attribute lists. I found that in the Developer's guide, there is a documentation related to customising authentication modules where we can specify MSISDN authentication module. I guess there is a msisdn.xml file which can be can be configured.
    I am a new bee on this front. But I guess, we will find it out together. To what extent you have done to configure. Could you give me little detail about it. ;)
    Your message too short for the forum.
    Manila

  • How to view image by using webcam at other computer.

    I am student. Now I make one project by using LabVIEW software. 
    Now, my question is:
    I have two computer, both computer got install software LabVIEW. And the programming for viewing image by using webcam already finished done.
    Now is, I want to open Webcam at computer B from Computer A. I already search, found that techique "Web Publishing Tools" can do this. Beside this, got another easier technique to do this?       

    There are other ways in which you can transfer images over the network but you will need to do some programming for it. Have a look at the following links:
    Streaming IMAQ Images Over a Network (or Internet)
    Transfer Images Over the Network
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • How do I set document property with delay using jquery?

    56     $("#DivStage2").delay(11000).fadeIn(1000);
    57     $("#DivStage2").delay(56000).fadeOut(1000); //11000 to 69000
    58     < need code here > 
      I have document item as defined below
      document.getElementById('2').setAttribute("style", "color: #FFF;");
    I want this to run on line 58 above with a delay before it of 4 seconds after line 56 starts.
    Please can anyone advise.
    Thank you in advance for any feedback and for everyone who has helped me so far on previous enquiries.
    I've ordered a jquery book which might help me, but I'm still learning.
    Terry

    terryfoster wrote:
    Okay I have
       <div id="DivStage2" >
        <h2 id="1" style="color: #707070;">Topic1</h2>
        <h2 id="2" style="color: #707070;">Topic2</h2>
      </div>
    Now in the function above I have...
    $("#DivStage2").delay(1000).fadeIn(1000);              // delay 1 sec then fade in for 1 sec
    $("#DivStage2").delay(56000).fadeOut(1000);         // keep this div onscreen for 56 secs then fadeout 1 sec
    Now after 20 seconds I want to turn Topic2 white as this is the one I want to focus on.....
    and topic1 grey again
    I would have thought......
             $("h2 #2").delay(20000).css("style", "color: #FFF;").delay(20000);
    would have turned the second topic white but No.... It does nothing at all
    (hmm why does everything I cut and paste end up in a table here now!!! What a bother editing!)
    Thank you
    It wont do anything because that function will only be executed after the <div> has faded out if it comes after
    $("#DivStage2").delay(56000).fadeOut(1000);

  • Workflow with delay using ABAP OO

    Hi,
    I am new to workflow and trying to design a workflow where the workflow should be triggered after certain number of days.
    For ex: Suppose the sales order is created. Then, I need to fire parallel workflows for Administrator like -
    1) 10 days after sales order is created contact department X
    2) 15 days after sales order is created, create dispatch order.
    I thought of having a workflow with start event 'ABC' and trigger this event 'ABC' from function module which creates sales order. Then have fork for parallel flows mentioned above. But how can I introduce this delay? I checked wait step, but it waits for an event.
    Also, is there any document/weblog which describes creating workflows along with ABAP class(Not using BOR object). I checked this link
    /people/jocelyn.dart/blog/2006/06/28/getting-started-with-abap-oo-for-workflow-using-the-ifworkflow-interface,
    but it does not give corresponding workflow integration.
    Regards,
    Srini.

    Hi,
    sorry it took so long to answer.
    It is possible to evaluate the latest end date by expression. Therefore you chose expression in field: Reference date.
    To get your requested start, you habe to do some work in advance.
    Create two new container elements in your workflow for your sales order end date -10  and your sales order end date.
    Create a step that calls a Z-Task (you have to create this one!) where you evaluate your Sales order end date and your Sales order end date-10  and write that back into a container element (please check your binding). Alternative back in your workflow include a container operation as a step, where you calculate your latest start date (Sales order end date-10).
    Back in your original Step you can now maintain latest start and end date based on your new container elements.
    Hth
    Ute

  • How to work with BI using Visual Composer....?

    Hi
    I want to work with BI report and BEx analyzer etc using  Visual Composer.
    I am using Visual Composer 7.1. I  have configured BI system connection using the following link
    http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm.
    In the above document i didnt understand the following para....
    Creating BI Users in the Portal
    Ensure that the BI back-end users also exist in the J2EE Engine. You can use the BI back end as the user store for the J2EE Engine or you can create the users manually. If you create the users manually, you should ensure that they have the same names as in the BI back-end; this avoids the need to configure user assignment.
    How to check BI back end user also exist in J2EE engine ?
    How to use BI kit in Visual composer. From where can i download BI kit for Visual Composer.
    What is the difference between developing application in VC using the above method and using BI kit.
    Please help me....
    Regards
    Sowmya....

    Hi,
    Without the BI kit you cannot do a lot of things in VC 7.1.
    This kit is not available with 7.1.
    The part that you did not understand meant that if you opening VC using a certain id in portal for eg "user" then the same id should be present in your backend system in this case BW system.
    Without this it wont be able to connect to the system.
    Hope this helps
    Regards
    Nikhil.
    Reward points if you find the answer helpful

  • How to deal with the using up space of /opt/oracle

    Hello, all
    We have an Oracle 10g preinstalled in a linux server (Rh 9). Now the system reports that the /opt/oracle is using up. The alert says:
         Filesystem /opt/oracle has only 19% available space
    Because I didn't install the Oracle dababase, I didn't have the chance to select a place for filesystem. Now the /opt/oracle is on the /dev/sda6 which is only 7.1G. I want to know what kind of information are stored here? Should it keep growing? Our database running on the Oracle is a small one, and it shouldn't occupy so much space. By the way, I scheduled the backup to disk (another hard disk) everyday. Is there any copy of the backup on /opt/oracle? How can I deal with it?
    Any advice is highly appreciated!
    Qian
    Message was edited by:
    QianChen
    Message was edited by:
    QianChen

    Typically, the growth files on your binary directory is going to be in the $ORACLE_HOME/network/logs/listener.log , any tracelog, sqlnet.log, or any files that get accidentally dumped in $ORACLE_HOME/dbs.
    I would check there first.
    Also, try scanning for the last few files written/updated in the past 30 days.
    #30 biggest files modified in last little while:
    find . -xdev -type f -mtime -14 -exec ls -l {} \; | sort -nk 5,5 | tail -30

  • How to poke with response using DDE

    I am trying to communicate with a windows application using the antiquated DDE interface, I know this interface has been overtaken by ActiveX but the application i am talking to (ZEMAX – optical modelling software) doesn't implement it.
    I have managed to post requests to the application and receive responses, all successfully. However one of the functions that I need to implement requires passing a pointer to a data structure to the application, I have the c code equivalent but no idea how to implement it. I have been using the supplied dde.llb but can find no documentation for it.
    This is the 'c' equivalent of the code i need to implement, can anyone help me with this???:
    int PostArrayTraceMessage(char *szBuffer, DDERAYDATA *RD)
    ATOM aItem;
    HGLOBAL hPokeData;
    DDEPOKE * lpPokeData;
    long numbytes;
    int numrays;
    if (RD[0].opd > 4)
    /* NSC Rays */
    numrays = (int)RD[0].opd - 5;
    else
    /* sequential rays */
    numrays = RD[0].error;
    /* point to where the data is */
    rdpGRD = RD;
    ngNumRays = numrays;
    numbytes = (1+numrays)*sizeof(DDERAYDATA);
    hPokeData = GlobalAlloc(GMEM_MOVEABLE | GMEM_DDESHARE, (LONG) sizeof(DDEPOKE) + numbytes);
    lpPokeData = (DDEPOKE *) GlobalLock(hPokeData);
    lpPokeData->fRelease = TRUE;
    lpPokeData->cfFormat = CF_TEXT;
    memcpy(lpPokeData->Value, RD, numbytes);
    /* clear the buffers */
    szGlobalBuffer[0] = '\0';
    szBuffer[0] = '\0';
    aItem = GlobalAddAtom("RayArrayData");
    GlobalUnlock(hPokeData);
    if (!PostMessage(hwndServer, WM_DDE_POKE, (WPARAM) hwndClient, PackDDElParam(WM_DDE_POKE, (UINT) hPokeData, aItem)))
    MessageBox (hwndClient, "Cannot communicate with ZEMAX!", "Hello?", MB_ICONEXCLAMATION | MB_OK);
    GlobalDeleteAtom(aItem);
    GlobalFree(hPokeData);
    return -1;
    GlobalDeleteAtom(aItem);
    WaitForData(hwndClient);
    strcpy(szBuffer, szGlobalBuffer);
    /* clear the pointer */
    rdpGRD = NULL;
    if (GotData) return 0;
    else return -1;
    Thanks for your help.
    Regards,
    Tom

    I'm not sure exactly what your code snippet is attempting, but if you are dependent on LabVIEW determining the pointer you probably are out of luck. There has been an ongoing thread in the last week regrading passing pointers to ActiveX and .NET so I won't belabor it too much other than to say that LabVIEW is running in its own memory space and isn't "aware" of what is in other code space. For a much better discussion look over the last few days (last week in particular) for the .NET/ActiveX discussions.
    There may be solutions, there were a number of posts to that thread that I haven't looked at, like writing dll's that encapsulate the "offending code" and provide sort of a translation medium.
    Good luck
    P.M.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • How to authenticate with Sharepoint using rest service and jquery

    Hi ,
    I have a requirement where i need to authenticate with  sharepoint from ios and android app using rest services and jquery.
    Can anyone help me in this .
    Thanks in Advance.
    Regards,
    Srinath 

    Hi,
    According to your post, my understanding is that you want to access SharePoint data from IOS and Android app.
    The following materials for your reference:
    How can I authenticate SharePoint REST calls from Android App?
    http://stackoverflow.com/questions/24673373/how-can-i-authenticate-sharepoint-rest-calls-from-android-app
    Calling RESTful services from your Android app
    http://www.techrepublic.com/blog/software-engineer/calling-restful-services-from-your-android-app/
    SharePoint 2013 REST API in iOS
    http://omicron-llama.co.uk/2012/12/13/sharepoint-2013-rest-api-in-ios/
    Best Regards
    Dennis Guo
    TechNet Community Support

  • How to get balance sheetby using profit center in f.01

    Hi Gurus,
    1.New gl has been activated in our system.
    2.Leading ledger 0L is activated in our system
    3.Document splitting is not activated in our system
    Right now one plant is running here.For this plant one profit center is in the system.So single balance sheet we are having.Now we are going for plant 2. Separate profit center has been created for plant 2. So, now client is asking separate balance sheet for plant wise. So can we have separate balance sheets  plant wise with out activating the "document splitting" in the system.Can we activate document splitting right now in the system and what will be effected in the system.If possible what are the activities to be done.Please help on the same.
    Regards
    Raja

    Dear Ajay,
    Thanks a lot for your promt reply.I have gone through S_PLO_86000028 and S_PLO_86000029 which have  given no result. The transactions are updating the  new gl table FAGLFLEXT with out profit center updation. Can you give any advise to get plant wise balance sheet. Inter plant transaction are here in our company. So can we activate document splitting in the middile of the year.If we activate in the middile of the year which areas will be effected in the system.Please help on the same.
    Thanks&Regards
    Raja

  • How to edit with sed using a $var?

    NamePkg="mousekeywin-0.2.wm.tar.gz"
    Content of pkg.list
    desktopewmh-0.1.wm.tar.gz
    mousekeywin-0.2.wm.tar.gz
    rcwminit-0.1.1.wm.tar.gz
    How to remove line "mousekeywin-0.2.wm.tar.gz" with $NamePkg

    sed -e "s|$NamePkg||g" -i pkg.list
    will delete it but leave an empty space in place
    sed -e "/$NamePkg/d" -i pkg.list
    will delete the line completely

  • How to Authenticate with sharepoint using rest services

    I have a requirement where i need to authenticate with  sharepoint from ios and android app using rest services and jquery.
    Can anyone help me in this .

    You can use OAuth for authentication.
    http://msdn.microsoft.com/en-us/library/office/fp142382%28v=office.15%29.aspx

  • Error message trying to use webcam

    I have a HP Pavilion DV7 with 4GB ram, (2) 250 MB HDs.  Plenty of ram appears to be available referencing sidebar tool, both hard drives are less than half full.
    I am getting this message: 
    "There is not enough disk space for taking snapshots"  when I try take a snapshot with the integrated webcam.  I get the same message when trying to record a video, apply and avatar effect, pretty much anything to do with using the webcam.
    All other programs in the MediaSmart Suite work perfectly as do all other software apps.
    Ii would greatly appreciate any help or thoughts on how to get use of my webcam again.
    Thank you in advance.
    Moe
    Message Edited by Moe_Mullet on 10-20-2009 12:11 PM

    I'm having this same issue and wonder if anyone ever solved it?

Maybe you are looking for