How to solve DDE server window: itunes.exe-bad image on windows vista itunes 10.2.1.1

i got this message DDE server window: itunes.exe-bad image every time when i tried to open itunes, safary, QuickTime Player  this happened when I updated itunes.

Which particular file are the messages complaining about, rock? (Precise spelling, please.)

Similar Messages

  • Re: Can't Logon - How do I fix the error "Winlogon.exe- Bad Image"?

    Last night, my laptop did something odd. The screen went blue and it ran a check. The check was in three parts (thats all i remember) Once this was done, my laptop restarted and was working fine.
    Later on this morning it crashed and restarted, but when it got to where it usually displays the user logons, it came up with an error message. The title was winlogon.exe- bad image
    and the message described how the file was incorrect.
    Now my laptop wont let me logon. How do i fix this?

    Sounds like the file system has corrupted unfortunately it has affected one of the important files required for windows to boot up.
    You will need a boot CD to repair the problem for this I would recommend Microsoft Diagnostics and Recovery Toolset which you can download from http://www.microsoft.com/downloads/details.aspx?familyid=5D600369-0554-4595-8AB4-C34B2860E087&displaylang=en
    Run the installer, go to the install folder and burn "erd50.iso" as an image file (not a data CD) using software such as Nero.
    Next you must boot from CD-ROM I'm not sure what procedure this is for your laptop so consult the manual or change the boot order in the BIOS either way it's the method as booting the recovery disc.
    When the software has loaded you will be asked which install of Windows you wish to repair if no drives i.e. C: are offered in the list box then you may have to change the BIOS setting with regards to AHCI compatible mode and switched back when you're done.
    If C drive is visible good then the hard drive is accessible however you must select "Do not attach a Windows installation." and click on OK.
    Click Start, and select "Command Prompt" you will get a black box with white text.
    type the following and enter: chkdsk c: /f /r
    This command will perform a full scan of your hard drive and correct any errors it may find which could take up to 45 minutes depending on the size of your drive.
    When it has finished shutdown and restart your laptop without the CD in the drive, if you've changed the AHCI mode in the BIOS then change it back.
    If Windows still doesn't startup then boot from the CD again and rerun "Command Prompt"
    type the following and enter:
    c:
    cd\windows\system32
    if entered correctly your screen should display: C:\Windows\system32>
    type the following and enter: (note: the dot is required and not a typing error)
    copy dllcache\winlogon.exe . /y
    if all goes well you should see a message: 1 file(s) copied.
    Shutdown the laptop restore any BIOS settings and hopefully Windows will startup again as normal. :)
    Richard S.

  • How do i get rid of firefox.exe bad image

    that is all the information i can give.

    What do you mean "bad Image"? Please clarify what's going on

  • DDE Server Windows; iTunes.exe 0x089c1040 such memory cannot be "written"

    downloaded and executed iTunes,
    iTunes Software License Agreement, after "agree".
    Error Prompt appear:
    DDE Server Windows: iTunes.exe
    "0x089c1040" reference internal memory. Such Internal memory cannot be "written"
    After "confirm"
    error message disappear but nothing happen,
    Your advice of what's next will be greatly appreciate.

    Hey back!
    I found out how to solve it
    i just needed to install the new quicktime version xD
    now everything is perfect !^^
    but thanks to all who read it!
    greetings, wajakla123!

  • DDE Server Windows: iTunes.exe - Entry Point Not Found

    Windows 7 Home Premium
    When I start iTunes I get this error.  I click OK 4 times and iTunes starts and works OK.
    DDE Server Windows: iTunes.exe - Entry Point Not Found
    The procedure entry point QTCF_CFHTTPMessageSetHeaderFieldValue could not be located in the dynamic link library QTCF.dll.
    I reinstalled iTunes 10.5.3.3 and selected the repair option.  Same error.
    I reinstalled QuickTime 7.7.1 (1680.42) and selected the repair option.  Same error.

    Peculiar. I don't think iTunes versions 10.5.x need a QTCF.dll to launch. So something odd is afoot.
    Can you check something for me? Do a search of your C drive for QTCF.dll. How many copies do you find, and what is their location?
    On a 32-bit system, the standard location is:
    C:\Program files\QuickTime\QTSystem\
    On a 64-bit system, the standard location is:
    C:\Program files (x86)\QuickTime\QTSystem\

  • Error messages - DDE Server Windows itunes.exe - Entry point Not found and iTunesHelper.exe - The procedure entry point asl_add_log_file could not be located in the dynamic link Library ASL.dll

    Hi
            I have tried to research these problems I am getting, but have not been able to resolve them.
    1st is the above DDE Server Windows iTunes.exe - entry point not found.
    This only occurs when I try to start iTunes.
    if I click ok , several times, iTunes will start but slowly.
    If at any time I have to reboot my computer I get
    iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
    if I click 3 times OK it goes away.
    To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
    Installing it but still get the same errors on reboot and trying to run iTunes
    Anyone any ideas please.
    I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
    Ram 4.00GB
    32bit OS
    Windows 7 Ultimate SP1
    Firewall - Zonealarm
    Virus   -  Zonealarm
    Thanks in advance
    Steve
    Message was edited by: Ybslik
    Message was edited by: Ybslik

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • "DDE server window: itunes.exe - corrupt disk " please help!!!

    i keep trying to oppen my itunes on my laptop (a dell inspiron with windows 7) and it keeps saying:  "DDE server window: itunes.exe - corrupt disk "
    also says  "the folder "iTunes" is on a locked disk or you do not have write permissions for this folder"
    i dont know anything about this kind of stuff i need detailled help please

    hi Hung Tang!
    hmmm. just to be on the safe side, please try searching for that file again, after having done this:
    Open "My computer". go to the Tools menu. Select "folder options ..." click the "view" tab. Make sure "Show hidden files and folders" is checked and "Hide extensions for known file types" is unchecked, like so:
    http://www.pixentral.com/show.php?pic=1yUGzJM0gRKQ8LtcizzwMSgXNb2u
    If the QT file still isn't showing up then, and the fix from that QTfW thread is still impossible to apply, then I think that a
    b clean
    uninstall then reinstall (with freshly downloaded itunes and ipod software) would be prudent. we want to try to try to get rid of any corrupted files (in either your itunes or quicktime set-ups).
    Da Gopha, "iTfW: stepwise clean uninstallation of iTunes", 09:51am Apr 5, 2005 CDT
    It would also be prudent to back up your music prior to doing this. we aren't going to be doing anything that would normally affect them, but it's best not to tempt fate.
    love, b

  • DDE server window:  iTunes.exe- No Disk

    When I open itunes I get this window that's labeled DDE Server Window: iTunes.exe-No Disk
    and it reads "There is no disk in the drive. Please insert a disk into drive \Device\Harddisk2\DR4"
    This happens with or without the ipod plugged in. I also have a USB hard drive. I don't know what's wrong.

    hi Hung Tang!
    hmmm. just to be on the safe side, please try searching for that file again, after having done this:
    Open "My computer". go to the Tools menu. Select "folder options ..." click the "view" tab. Make sure "Show hidden files and folders" is checked and "Hide extensions for known file types" is unchecked, like so:
    http://www.pixentral.com/show.php?pic=1yUGzJM0gRKQ8LtcizzwMSgXNb2u
    If the QT file still isn't showing up then, and the fix from that QTfW thread is still impossible to apply, then I think that a
    b clean
    uninstall then reinstall (with freshly downloaded itunes and ipod software) would be prudent. we want to try to try to get rid of any corrupted files (in either your itunes or quicktime set-ups).
    Da Gopha, "iTfW: stepwise clean uninstallation of iTunes", 09:51am Apr 5, 2005 CDT
    It would also be prudent to back up your music prior to doing this. we aren't going to be doing anything that would normally affect them, but it's best not to tempt fate.
    love, b

  • DDE server window; itune.exe-application error

    Can t open itune: DDe server window: itune.exe-application error. Then, instruction at 0x6d561040 memory could not be read.  P.S.: the code change every time i click ok.

    I do not know the answer to this, but if you are willing to to do some troubleshooting:
    Which version of windows are you using?
    XP vista or 7, 64 bit or 32 bit.
    Do you have Quicktime? If so does Quicktime launch?
    Did you change anything on your computer just before this problem started?
    Please look in the Event viewer for a helpful error message.
    To open the event viewer:
    Control Panel>>Administrative Tools>>Event Viewer
    Or type Event Viewer into the search box.
    Then select Windows Logs>>Application
    Open the Event viewer immediately after iTunes crashes.
    The error message should be at or near the top.
    Double click on it to open more information and press copy.
    Paste the result into your post.
    You are looking for a message starting something like this:
    Problem Event Name: APPCRASH
    Application Name: iTunes.exe
    Application Version: 10.2.1.1
    Application Timestamp: 4d756476
    Fault Module Name: iTunes.dll

  • DDE Server Window: AcroRd32.exe - App Error

    I would like to know on what following error is about, and how to solve it.
    Does anyone have any suggestions?
    Thanks in advance for any suggestions :>
    DDE Server Window: AcroRd32.exe - App Error
    "0x8d18bad5" Reference to "0x8d18bad5" Memory, which memory cannot be written.

    I do not know the answer to this, but if you are willing to to do some troubleshooting:
    Which version of windows are you using?
    XP vista or 7, 64 bit or 32 bit.
    Do you have Quicktime? If so does Quicktime launch?
    Did you change anything on your computer just before this problem started?
    Please look in the Event viewer for a helpful error message.
    To open the event viewer:
    Control Panel>>Administrative Tools>>Event Viewer
    Or type Event Viewer into the search box.
    Then select Windows Logs>>Application
    Open the Event viewer immediately after iTunes crashes.
    The error message should be at or near the top.
    Double click on it to open more information and press copy.
    Paste the result into your post.
    You are looking for a message starting something like this:
    Problem Event Name: APPCRASH
    Application Name: iTunes.exe
    Application Version: 10.2.1.1
    Application Timestamp: 4d756476
    Fault Module Name: iTunes.dll

  • DDE Server Window: iTunes - error

    Updated iTunes to 10.5.2 and here you go the error window: DDE Server Window: iTunes. Tried to uninstall & install again, the error remains. Can anyone tell me how to deal with this?

    Hey back!
    I found out how to solve it
    i just needed to install the new quicktime version xD
    now everything is perfect !^^
    but thanks to all who read it!
    greetings, wajakla123!

  • DDE Server Window: QuicktimePlayer.exe - Application Error

    Good evening,
    I bought an Iphone 4. BUT!!!!!!!!!!!!!!!!!!!!!
    I have to install Itunes and Quicktime. Unfortunately, after the complete installation I have this error message... DDE Server Window: QuicktimePlayer.exe - Application Error
    I tried to uninstall everything, no result. I tried to change session, the 2 other administrators have the same error message. I cannot run any Apple application (Quicktime, Itunes, Safary).
    My computer technician told me that is is a Windows problem and I have to reformat and start everything over.... How can I avoid this??? Please help.

    Strange. You see DDE errors associated with Safari every now and then (when opening email links), but it's very odd to see them feature as part of start-up errors for iTunes, Safari and QuickTime.
    Let's try a few measures relating to fixing Windows operating system problems that don't involve a complete windows reinstall.
    First, check to see that your Microsoft .NET framework is up-to-date and functioning properly, as per:
    [iTunes for Windows: "iTunes was not installed properly. Please reinstall iTunes" message|http://support.apple.com/kb/TS3074]
    Does that help with the start-up errors?
    If not, perhaps try an sfc /scannow as per:
    http://www.updatexp.com/scannow-sfc.html
    Does that help at all?

  • DDE Server Window: AcroRd32.exe - Bad Image

    I am receiving the following error message upon opening Adobe Reader:
    DDE Server Window: AcroRd32.exe - Bad Image
    C:\Program Files\Adobe\Reader 9.0\Reader\sqlite.dll is either not designed to run on Windows or it contains an error.  Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.
    About my PC:
    Vista SP2 32-bit
    Dell XPS M1530
    IE 9
    Intel Core2Duo T8300 2.4Ghz
    4GB Ram
    If any other information is necessary, please let me know.
    Thanks for your help!
    Joe

    Which particular file are the messages complaining about, rock? (Precise spelling, please.)

  • DDE Server Windows Acrobat.exe - Erreur d'application

    DDE Server Window: Acrobat.exe - Erreur d'application
    L'instruction à "0x0319b3b2" emploie l'adresse mémoire "0x02b9fb08". La mémoire ne peut pas être "read".
    Cliquez sur OK pour terminer le programme.
    Cliquez sur Annuler pour déboguer le programme.
    (French version of windows/acrobat)
    I got this error message when i close a PDF. I'd "google" all days long , got no real solution.
    I try to uninstall the Adobe Reader and Professionnal , with reboot. Delete the Adobe folder , delete Documents and settings/%username%/Apps Data/Adobe. Reinstall both with reboot in each.
    I try the repair thing.
    Delete all TEMP , acr*.tmp.
    Try to stop Network DDE in services.msc
    Got this error on like 7-8 computer / 100 .
    Windows XP SP3
    Please help me!

    up

  • DDE Server Window Error Exiting InDesign 7.5.1 (CS 5.5)

    I just installed CS 5.5 on an XP SP3 PC.  We previously used CS2.  I had the user open files created under CS2 InDesign in the new CS 5.5 InDesign.  The files opened and displayed with no issues in InDesign.  However, when she exits InDesign she gets a DDE Server Windows error dialog box.
    DDE Server Window: InDesign.exe - Application Error
    The instruction at "0x#####b##" referenced memory at "0x###d#f##".  The memory could not be "read".
    I ran all updates for InDesign and it shows as version 7.5.1.
    I saw a post in the PhotoShop forums of the same type of DDE error if you open a file and exit without saving, but it does not matter if I save the file or do not save the file.  I still get the DDE error when exiting InDesign.
    Any ideas on how to resolve the error?
    Thanks,
    Rick

    of course, missing links! Dóh!
    2 weeks ago we upgraded 3 of 8 PC from CS4 to 5.5.
    All 3 PC´shave the same issue with the same files. the other 5 computers are working still with CS4, without a problem on the same file!
    adobe often causes different problem in the company, so we know about the Adobe cleaner tool.
    I have deinstalled cs4, run the cleaner tool and then installed cs5.5. I hope i dont have to reinstall again...
    I dont work myself with Adobe products, but i have to troubleshoot, which is not easy if you dont know how it works...

Maybe you are looking for

  • Access to Attribute Type via Java API

    Hi, I'm writing an aplication in Java to access out OLAP schema and display certain DIMENSION/LEVEL and ATTRIBUTE values. This is working out really well but I'm hitting one issue at the moment which has me stumped. When I display a Dimension value i

  • Variance between GL inventory account balance and OPM inventory value

    Hi everyone, I am using OPM actual costing method (PPAC), I have set profile option GMF: Book Allocations using current period basis to YES. Assume that we have a product x with openning balance Quantity = 20 TONs and Vale = 100$ (Unit cost = 5$). As

  • IPad will not sync with new ITunes

    Hey, I just updated ITunes to 10.5.2.11 and when I tried to sync with my Ipad - it said that it could not because I did not have "Apple Mobile Device Service" started. What the heck is that - I synced just fine before the update. Help. Thanks

  • How to include OCI headers

    Hi, I'm having a difficulties with oci. I have installed the latest Oracle Instant Client but when I try to compile something with includes oci headers it isn't found. Is there a way to configure the compiler to include the OCI headers when I try to

  • MATMAS01

    Hello experts! I am trying to migrate some MM but I have some problems using MATMAS01 IDOC. Filling segments E1MARAM and E1MATKM is not difficult. I also can transfer the data from those segments and it creates the material master with its basic data